/* $Id: plplot.h,v 1.8 2009/06/14 15:44:57 ajb Exp $
Macros and prototypes for the PLplot package. This header file must
be included by all user codes.
Note: some systems allow the Fortran & C namespaces to clobber each
other. So for PLplot to work from Fortran, we do some rather nasty
things to the externally callable C function names. This shouldn't
affect any user programs in C as long as this file is included.
Copyright (C) 1992 Maurice J. LeBrun, Geoff Furnish, Tony Richardson.
Copyright (C) 2004 Alan W. Irwin
Copyright (C) 2004 Rafael Laboissiere
Copyright (C) 2004 Andrew Ross
This file is part of PLplot.
PLplot is free software; you can redistribute it and/or modify
it under the terms of the GNU Library General Public License as published
by the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
PLplot is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU Library General Public License for more details.
You should have received a copy of the GNU Library General Public License
along with PLplot; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef __PLPLOT_H__
#define __PLPLOT_H__
#ifdef __GNUC__
#ifndef __deprecated
#define __deprecated __attribute__((deprecated))
#endif
#ifndef __noreturn
#define __noreturn __attribute__((noreturn))
#endif
#else
#ifndef __deprecated
#define __deprecated
#endif
#ifndef __noreturn
#define __noreturn
#endif
#endif
#include "plConfig.h"
/*--------------------------------------------------------------------------*\
* USING PLplot
*
* To use PLplot from C or C++, it is only necessary to
*
* #include "plplot.h"
*
* This file does all the necessary setup to make PLplot accessible to
* your program as documented in the manual. Additionally, this file
* allows you to request certain behavior by defining certain symbols
* before inclusion. At the moment the only one is:
*
* #define DOUBLE or..
* #define PL_DOUBLE
*
* This causes PLplot to use doubles instead of floats. Use the type
* PLFLT everywhere in your code, and it will always be the right thing.
*
* Note: most of the functions visible here begin with "pl", while all
* of the data types and switches begin with "PL". Eventually everything
* will conform to this rule in order to keep namespace pollution of the
* user code to a minimum. All the PLplot source files actually include
* "plplotP.h", which includes this file as well as all the internally-
* visible declarations, etc.
\*--------------------------------------------------------------------------*/
/* The majority of PLplot source files require these, so.. */
/* Under ANSI C, they can be included any number of times. */
#include <stdio.h>
#include <stdlib.h>
/*--------------------------------------------------------------------------*\
* SYSTEM IDENTIFICATION
*
* Several systems are supported directly by PLplot. In order to avoid
* confusion, one id macro per system is used. Since different compilers
* may predefine different system id macros, we need to check all the
* possibilities, and then set the one we will be referencing. These are:
*
* __cplusplus Any C++ compiler
* __unix Any Unix-like system
* __hpux Any HP/UX system
* __aix Any AIX system
* __linux Linux for i386
* (others...)
*
\*--------------------------------------------------------------------------*/
#ifdef unix /* the old way */
#ifndef __unix
#define __unix
#endif
#endif
/* Make sure Unix systems define "__unix" */
#if defined(SX) || /* NEC Super-UX */ \
(defined(_IBMR2) && defined(_AIX)) || /* AIX */ \
defined(__hpux) || /* HP/UX */ \
defined(sun) || /* SUN */ \
defined(CRAY) || /* Cray */ \
defined(__convexc__) || /* CONVEX */ \
(defined(__alpha) && defined(__osf__)) || /* DEC Alpha AXP/OSF */ \
defined(__APPLE__) /* Max OS-X */
#ifndef __unix
#define __unix
#endif
#endif
/* A wrapper used in some header files so they can be compiled with cc */
#define PLARGS(a) a
/*--------------------------------------------------------------------------*\
* dll functions
\*--------------------------------------------------------------------------*/
#include "pldll.h"
/*--------------------------------------------------------------------------*\
* Base types for PLplot
*
* Only those that are necessary for function prototypes are defined here.
* Notes:
*
* PLINT is typedef'd to a long by default. This is a change from some
* previous versions, where a int was used. However, so long as you have
* used type PLINT for integer array arguments as specified by the API,
* this change will be transparent for you.
*
* short is currently used for device page coordinates, so they are
* bounded by (-32767, 32767). This gives a max resolution of about 3000
* dpi, and improves performance in some areas over using a PLINT.
*
* PLUNICODE should be a 32-bit unsigned integer on all platforms.
* For now, we are using unsigned int for our Linux ix86 unicode experiments,
* but that doesn't guarantee 32 bits exactly on all platforms so this will
* be subject to change.
\*--------------------------------------------------------------------------*/
#if defined(PL_DOUBLE) || defined(DOUBLE)
typedef double PLFLT;
#define PLFLT_MAX DBL_MAX
#define PLFLT_MIN DBL_MIN
#else
typedef float PLFLT;
#define PLFLT_MAX FLT_MAX
#define PLFLT_MIN FLT_MIN
#endif
#if 0 /* ajb: stdint.h isn't that portable (really c99 stuff) */
#if (defined(HAVE_STDINT_H) && !defined(__cplusplus)) ||\
(defined(__cplusplus) && defined(HAVE_CXX_STDINT_H))
#include <stdint.h>
/* This is apparently portable if stdint.h exists. */
typedef uint32_t PLUNICODE;
typedef int32_t PLINT;
#else
/* A reasonable back-up in case stdint.h does not exist on the platform. */
typedef unsigned int PLUNICODE;
typedef int PLINT;
#endif
#endif
/* ajb: define explicitly avoiding stdint.h above */
typedef unsigned int PLUNICODE;
typedef int PLINT;
/* For identifying logical (boolean) arguments */
typedef PLINT PLBOOL;
/* For passing user data, as with X's XtPointer */
typedef void* PLPointer;
/*--------------------------------------------------------------------------*\
* Complex data types and other good stuff
\*--------------------------------------------------------------------------*/
/* Switches for escape function call. */
/* Some of these are obsolete but are retained in order to process
old metafiles */
#define PLESC_SET_RGB 1 /* obsolete */
#define PLESC_ALLOC_NCOL 2 /* obsolete */
#define PLESC_SET_LPB 3 /* obsolete */
#define PLESC_EXPOSE 4 /* handle window expose */
#define PLESC_RESIZE 5 /* handle window resize */
#define PLESC_REDRAW 6 /* handle window redraw */
#define PLESC_TEXT 7 /* switch to text screen */
#define PLESC_GRAPH 8 /* switch to graphics screen */
#define PLESC_FILL 9 /* fill polygon */
#define PLESC_DI 10 /* handle DI command */
#define PLESC_FLUSH 11 /* flush output */
#define PLESC_EH 12 /* handle Window events */
#define PLESC_GETC 13 /* get cursor position */
#define PLESC_SWIN 14 /* set window parameters */
#define PLESC_DOUBLEBUFFERING 15 /* configure double buffering */
#define PLESC_XORMOD 16 /* set xor mode */
#define PLESC_SET_COMPRESSION 17 /* AFR: set compression */
#define PLESC_CLEAR 18 /* RL: clear graphics region */
#define PLESC_DASH 19 /* RL: draw dashed line */
#define PLESC_HAS_TEXT 20 /* driver draws text */
#define PLESC_IMAGE 21 /* handle image */
#define PLESC_IMAGEOPS 22 /* plimage related operations */
#define PLESC_PL2DEVCOL 23 /* convert PLColor to device color */
#define PLESC_DEV2PLCOL 24 /* convert device color to PLColor */
#define PLESC_SETBGFG 25 /* set BG, FG colors */
#define PLESC_DEVINIT 26 /* alternate device initialization */
/* image operations */
#define ZEROW2B 1
#define ZEROW2D 2
#define ONEW2B 3
#define ONEW2D 4
/* Window parameter tags */
#define PLSWIN_DEVICE 1 /* device coordinates */
#define PLSWIN_WORLD 2 /* world coordinates */
/* PLplot Option table & support constants */
/* Option-specific settings */
#define PL_OPT_ENABLED 0x0001 /* Obsolete */
#define PL_OPT_ARG 0x0002 /* Option has an argment */
#define PL_OPT_NODELETE 0x0004 /* Don't delete after processing */
#define PL_OPT_INVISIBLE 0x0008 /* Make invisible */
#define PL_OPT_DISABLED 0x0010 /* Processing is disabled */
/* Option-processing settings -- mutually exclusive */
#define PL_OPT_FUNC 0x0100 /* Call handler function */
#define PL_OPT_BOOL 0x0200 /* Set *var = 1 */
#define PL_OPT_INT 0x0400 /* Set *var = atoi(myoptarg) */
#define PL_OPT_FLOAT 0x0800 /* Set *var = atof(myoptarg) */
#define PL_OPT_STRING 0x1000 /* Set var = myoptarg */
/* Global mode settings */
/* These override per-option settings */
#define PL_PARSE_PARTIAL 0x0000 /* For backward compatibility */
#define PL_PARSE_FULL 0x0001 /* Process fully & exit if error */
#define PL_PARSE_QUIET 0x0002 /* Don't issue messages */
#define PL_PARSE_NODELETE 0x0004 /* Don't delete options after */
/* processing */
#define PL_PARSE_SHOWALL 0x0008 /* Show invisible options */
#define PL_PARSE_OVERRIDE 0x0010 /* Obsolete */
#define PL_PARSE_NOPROGRAM 0x0020 /* Program name NOT in *argv[0].. */
#define PL_PARSE_NODASH 0x0040 /* Set if leading dash NOT required */
#define PL_PARSE_SKIP 0x0080 /* Skip over unrecognized args */
/* FCI (font characterization integer) related constants. */
#define PL_FCI_MARK 0x80000000
#define PL_FCI_IMPOSSIBLE 0x00000000
#define PL_FCI_HEXDIGIT_MASK 0xf
#define PL_FCI_HEXPOWER_MASK 0x7
#define PL_FCI_HEXPOWER_IMPOSSIBLE 0xf
/* These define hexpower values corresponding to each font attribute. */
#define PL_FCI_FAMILY 0x0
#define PL_FCI_STYLE 0x1
#define PL_FCI_WEIGHT 0x2
/* These are legal values for font family attribute */
#define PL_FCI_SANS 0x0
#define PL_FCI_SERIF 0x1
#define PL_FCI_MONO 0x2
#define PL_FCI_SCRIPT 0x3
#define PL_FCI_SYMBOL 0x4
/* These are legal values for font style attribute */
#define PL_FCI_UPRIGHT 0x0
#define PL_FCI_ITALIC 0x1
#define PL_FCI_OBLIQUE 0x2
/* These are legal values for font weight attribute */
#define PL_FCI_MEDIUM 0x0
#define PL_FCI_BOLD 0x1
/* Obsolete names */
#define plParseInternalOpts(a, b, c) c_plparseopts(a, b, c)
#define plSetInternalOpt(a, b) plSetOpt(a, b)
/* Option table definition */
typedef struct {
const char *opt; /* pmr: const */
int (*handler) (const char *, const char *, void *);
void *client_data;
void *var;
long mode;
const char *syntax; /* pmr: const */
const char *desc; /* pmr: const */
} PLOptionTable;
/* PLplot Graphics Input structure */
#define PL_MAXKEY 16
typedef struct {
int type; /* of event (CURRENTLY UNUSED) */
unsigned int state; /* key or button mask */
unsigned int keysym; /* key selected */
unsigned int button; /* mouse button selected */
PLINT subwindow; /* subwindow (alias subpage, alias subplot) number */
char string[PL_MAXKEY]; /* translated string */
int pX, pY; /* absolute device coordinates of pointer */
PLFLT dX, dY; /* relative device coordinates of pointer */
PLFLT wX, wY; /* world coordinates of pointer */
} PLGraphicsIn;
/* Structure for describing the plot window */
#define PL_MAXWINDOWS 64 /* Max number of windows/page tracked */
typedef struct {
PLFLT dxmi, dxma, dymi, dyma; /* min, max window rel dev coords */
PLFLT wxmi, wxma, wymi, wyma; /* min, max window world coords */
} PLWindow;
/* Structure for doing display-oriented operations via escape commands */
/* May add other attributes in time */
typedef struct {
unsigned int x, y; /* upper left hand corner */
unsigned int width, height; /* window dimensions */
} PLDisplay;
/* Macro used (in some cases) to ignore value of argument */
/* I don't plan on changing the value so you can hard-code it */
#define PL_NOTSET (-42)
/* See plcont.c for examples of the following */
/*
* PLfGrid is for passing (as a pointer to the first element) an arbitrarily
* dimensioned array. The grid dimensions MUST be stored, with a maximum of 3
* dimensions assumed for now.
*/
typedef struct {
PLFLT *f;
PLINT nx, ny, nz;
char Padding[4];
} PLfGrid;
/*
* PLfGrid2 is for passing (as an array of pointers) a 2d function array. The
* grid dimensions are passed for possible bounds checking.
*/
typedef struct {
PLFLT **f;
PLINT nx, ny;
} PLfGrid2;
/*
* NOTE: a PLfGrid3 is a good idea here but there is no way to exploit it yet
* so I'll leave it out for now.
*/
/*
* PLcGrid is for passing (as a pointer to the first element) arbitrarily
* dimensioned coordinate transformation arrays. The grid dimensions MUST be
* stored, with a maximum of 3 dimensions assumed for now.
*/
typedef struct {
PLFLT *xg, *yg, *zg;
PLINT nx, ny, nz;
char Padding[4];
} PLcGrid;
/*
* PLcGrid2 is for passing (as arrays of pointers) 2d coordinate
* transformation arrays. The grid dimensions are passed for possible bounds
* checking.
*/
typedef struct {
PLFLT **xg, **yg, **zg;
PLINT nx, ny;
} PLcGrid2;
/*
* NOTE: a PLcGrid3 is a good idea here but there is no way to exploit it yet
* so I'll leave it out for now.
*/
/* PLColor is the usual way to pass an rgb color value. */
/* pmr: moved name to top to fill in alignment */
typedef struct {
const char *name; /* pmr: const */
unsigned char r; /* red */
unsigned char g; /* green */
unsigned char b; /* blue */
unsigned char Padding[5]; /* pmr:padding to boundary */
} PLColor;
/* PLControlPt is how cmap1 control points are represented. */
typedef struct {
PLFLT h; /* hue */
PLFLT l; /* lightness */
PLFLT s; /* saturation */
PLFLT p; /* position */
int rev; /* if set, interpolate through h=0 */
} PLControlPt;
/* A PLBufferingCB is a control block for interacting with devices
that support double buffering. */
typedef struct {
PLINT cmd;
PLINT result;
} PLBufferingCB;
#define PLESC_DOUBLEBUFFERING_ENABLE 1
#define PLESC_DOUBLEBUFFERING_DISABLE 2
#define PLESC_DOUBLEBUFFERING_QUERY 3
/*--------------------------------------------------------------------------*\
* BRAINDEAD-ness
*
* Some systems allow the Fortran & C namespaces to clobber each other.
* For PLplot to work from Fortran on these systems, we must name the the
* externally callable C functions something other than their Fortran entry
* names. In order to make this as easy as possible for the casual user,
* yet reversible to those who abhor my solution, I have done the
* following:
*
* The C-language bindings are actually different from those
* described in the manual. Macros are used to convert the
* documented names to the names used in this package. The
* user MUST include plplot.h in order to get the name
* redefinition correct.
*
* Sorry to have to resort to such an ugly kludge, but it is really the
* best way to handle the situation at present. If all available
* compilers offer a way to correct this stupidity, then perhaps we can
* eventually reverse it.
*
* If you feel like screaming at someone (I sure do), please
* direct it at your nearest system vendor who has a braindead shared
* C/Fortran namespace. Some vendors do offer compiler switches that
* change the object names, but then everybody who wants to use the
* package must throw these same switches, leading to no end of trouble.
*
* Note that this definition should not cause any noticable effects except
* when debugging PLplot calls, in which case you will need to remember
* the real function names (same as before but with a 'c_' prepended).
*
* Also, to avoid macro conflicts, the BRAINDEAD part must not be expanded
* in the stub routines.
*
* Aside: the reason why a shared Fortran/C namespace is deserving of the
* BRAINDEAD characterization is that it completely precludes the the kind
* of universal API that is attempted (more or less) with PLplot, without
* Herculean efforts (e.g. remapping all of the C bindings by macros as
* done here). The vendors of such a scheme, in order to allow a SINGLE
* type of argument to be passed transparently between C and Fortran,
* namely, a pointer to a conformable data type, have slammed the door on
* insertion of stub routines to handle the conversions needed for other
* data types. Intelligent linkers could solve this problem, but these are
* not anywhere close to becoming universal. So meanwhile, one must live
* with either stub routines for the inevitable data conversions, or a
* different API. The former is what is used here, but is made far more
* difficult in a braindead shared Fortran/C namespace.
\*--------------------------------------------------------------------------*/
#ifndef BRAINDEAD
#define BRAINDEAD
#endif
#ifdef BRAINDEAD
#ifndef __PLSTUBS_H__ /* i.e. do not expand this in the stubs */
#define pl_setcontlabelformat c_pl_setcontlabelformat
#define pl_setcontlabelparam c_pl_setcontlabelparam
#define pladv c_pladv
#define plarrows c_plarrows
#define plaxes c_plaxes
#define plbin c_plbin
#define plbop c_plbop
#define plbox c_plbox
#define plbox3 c_plbox3
#define plcalc_world c_plcalc_world
#define plclear c_plclear
#define plcol0 c_plcol0
#define plcol1 c_plcol1
#define plcont c_plcont
#define plcpstrm c_plcpstrm
#define plend c_plend
#define plend1 c_plend1
#define plenv c_plenv
#define plenv0 c_plenv0
#define pleop c_pleop
#define plerrx c_plerrx
#define plerry c_plerry
#define plfamadv c_plfamadv
#define plfill c_plfill
#define plfill3 c_plfill3
#define plflush c_plflush
#define plfont c_plfont
#define plfontld c_plfontld
#define plgchr c_plgchr
#define plgcol0 c_plgcol0
#define plgcolbg c_plgcolbg
#define plgcompression c_plgcompression
#define plgdev c_plgdev
#define plgdidev c_plgdidev
#define plgdiori c_plgdiori
#define plgdiplt c_plgdiplt
#define plgfam c_plgfam
#define plgfci c_plgfci
#define plgfnam c_plgfnam
#define plglevel c_plglevel
#define plgpage c_plgpage
#define plgra c_plgra
#define plgriddata c_plgriddata
#define plgspa c_plgspa
#define plgstrm c_plgstrm
#define plgver c_plgver
#define plgvpd c_plgvpd
#define plgvpw c_plgvpw
#define plgxax c_plgxax
#define plgyax c_plgyax
#define plgzax c_plgzax
#define plhist c_plhist
#define plhls c_plhls
#define plhlsrgb c_plhlsrgb
#define plinit c_plinit
#define pljoin c_pljoin
#define pllab c_pllab
#define pllightsource c_pllightsource
#define plline c_plline
#define plline3 c_plline3
#define pllsty c_pllsty
#define plmap c_plmap
#define plmeridians c_plmeridians
#define plmesh c_plmesh
#define plmeshc c_plmeshc
#define plmkstrm c_plmkstrm
#define plmtex c_plmtex
#define plot3d c_plot3d
#define plot3dc c_plot3dc
#define plot3dcl c_plot3dcl
#define plparseopts c_plparseopts
#define plpat c_plpat
#define plpoin c_plpoin
#define plpoin3 c_plpoin3
#define plpoly3 c_plpoly3
#define plprec c_plprec
#define plpsty c_plpsty
#define plptex c_plptex
#define plreplot c_plreplot
#define plrgb c_plrgb
#define plrgb1 c_plrgb1
#define plrgbhls c_plrgbhls
#define plschr c_plschr
#define plscmap0 c_plscmap0
#define plscmap0n c_plscmap0n
#define plscmap1 c_plscmap1
#define plscmap1l c_plscmap1l
#define plscmap1n c_plscmap1n
#define plscol0 c_plscol0
#define plscolbg c_plscolbg
#define plscolor c_plscolor
#define plscompression c_plscompression
#define plsdev c_plsdev
#define plsdidev c_plsdidev
#define plsdimap c_plsdimap
#define plsdiori c_plsdiori
#define plsdiplt c_plsdiplt
#define plsdiplz c_plsdiplz
#define plsesc c_plsesc
#define plsetopt c_plsetopt
#define plsfam c_plsfam
#define plsfci c_plsfci
#define plsfnam c_plsfnam
#define plxsfnam c_plxsfnam
#define plshade c_plshade
#define plshade1 c_plshade1
#define plshades c_plshades
#define plsmaj c_plsmaj
#define plsmem c_plsmem
#define plsmin c_plsmin
#define plsori c_plsori
#define plspage c_plspage
#define plspause c_plspause
#define plsstrm c_plsstrm
#define plssub c_plssub
#define plssym c_plssym
#define plstar c_plstar
#define plstart c_plstart
#define plstripa c_plstripa
#define plstripc c_plstripc
#define plstripd c_plstripd
#define plstyl c_plstyl
#define plsurf3d c_plsurf3d
#define plsurf3dl c_plsurf3dl
#define plsvect c_plsvect
#define plsvpa c_plsvpa
#define plsxax c_plsxax
#define plsyax c_plsyax
#define plsym c_plsym
#define plszax c_plszax
#define pltext c_pltext
#define plvasp c_plvasp
#define plvect c_plvect
#define plvpas c_plvpas
#define plvpor c_plvpor
#define plvsta c_plvsta
#define plw3d c_plw3d
#define plwid c_plwid
#define plwind c_plwind
#define plxormod c_plxormod
#endif /* __PLSTUBS_H__ */
#endif /* BRAINDEAD */
/* Redefine some old function names for backward compatibility */
#ifndef __PLSTUBS_H__ /* i.e. do not expand this in the stubs */
#define plclr pleop
#define plpage plbop
#define plcol plcol0
#define plcontf plfcont
#define Alloc2dGrid plAlloc2dGrid
#define Free2dGrid plFree2dGrid
#define MinMax2dGrid plMinMax2dGrid
#define plP_gvpd plgvpd
#define plP_gvpw plgvpw
#define plotsh3d(x,y,z,nx,ny,opt) plsurf3d(x,y,z,nx,ny,opt, NULL, 0)
#endif /* __PLSTUBS_H__ */
/*--------------------------------------------------------------------------*\
* Function Prototypes
\*--------------------------------------------------------------------------*/
#ifdef __cplusplus
extern "C" {
#endif
/* All void types */
/* C routines callable from stub routines come first */
/* set the format of the contour labels */
PLDLLIMPEXP void
c_pl_setcontlabelformat(PLINT lexp, PLINT sigdig);
/* set offset and spacing of contour labels */
PLDLLIMPEXP void
c_pl_setcontlabelparam(PLFLT offset, PLFLT size, PLFLT spacing, PLINT active);
/* Advance to subpage "page", or to the next one if "page" = 0. */
PLDLLIMPEXP void
c_pladv(PLINT page);
/* simple arrow plotter. */
PLDLLIMPEXP void
c_plarrows(PLFLT *u, PLFLT *v, PLFLT *x, PLFLT *y, PLINT n,
PLFLT scale, PLFLT dx, PLFLT dy) ;
PLDLLIMPEXP void
c_plvect(PLFLT **u, PLFLT **v, PLINT nx, PLINT ny, PLFLT scale,
void (*pltr) (PLFLT, PLFLT, PLFLT *, PLFLT *, PLPointer),
PLPointer pltr_data);
PLDLLIMPEXP void
c_plsvect(PLFLT *arrowx, PLFLT *arrowy, PLINT npts, PLBOOL fill);
/* This functions similarly to plbox() except that the origin of the axes */
/* is placed at the user-specified point (x0, y0). */
PLDLLIMPEXP void
c_plaxes(PLFLT x0, PLFLT y0, const char *xopt, PLFLT xtick, PLINT nxsub,
const char *yopt, PLFLT ytick, PLINT nysub);
/* Plot a histogram using x to store data values and y to store frequencies */
/* Flags for plbin() - opt argument */
#define PL_BIN_DEFAULT 0
#define PL_BIN_CENTRED 1
#define PL_BIN_NOEXPAND 2
#define PL_BIN_NOEMPTY 4
PLDLLIMPEXP void
c_plbin(PLINT nbin, PLFLT *x, PLFLT *y, PLINT opt);
/* Start new page. Should only be used with pleop(). */
PLDLLIMPEXP void
c_plbop(void);
/* This draws a box around the current viewport. */
PLDLLIMPEXP void
c_plbox(const char *xopt, PLFLT xtick, PLINT nxsub,
const char *yopt, PLFLT ytick, PLINT nysub);
/* This is the 3-d analogue of plbox(). */
PLDLLIMPEXP void
c_plbox3(const char *xopt, const char *xlabel, PLFLT xtick, PLINT nsubx,
const char *yopt, const char *ylabel, PLFLT ytick, PLINT nsuby,
const char *zopt, const char *zlabel, PLFLT ztick, PLINT nsubz);
/* Calculate world coordinates and subpage from relative device coordinates. */
PLDLLIMPEXP void
c_plcalc_world(PLFLT rx, PLFLT ry, PLFLT *wx, PLFLT *wy, PLINT *window);
/* Clear current subpage. */
PLDLLIMPEXP void
c_plclear(void);
/* Set color, map 0. Argument is integer between 0 and 15. */
PLDLLIMPEXP void
c_plcol0(PLINT icol0);
/* Set color, map 1. Argument is a float between 0. and 1. */
PLDLLIMPEXP void
c_plcol1(PLFLT col1);
/* Draws a contour plot from data in f(nx,ny). Is just a front-end to
* plfcont, with a particular choice for f2eval and f2eval_data.
*/
PLDLLIMPEXP void
c_plcont(PLFLT **f, PLINT nx, PLINT ny, PLINT kx, PLINT lx,
PLINT ky, PLINT ly, PLFLT *clevel, PLINT nlevel,
void (*pltr) (PLFLT, PLFLT, PLFLT *, PLFLT *, PLPointer),
PLPointer pltr_data);
/* Draws a contour plot using the function evaluator f2eval and data stored
* by way of the f2eval_data pointer. This allows arbitrary organizations
* of 2d array data to be used.
*/
PLDLLIMPEXP void
plfcont(PLFLT (*f2eval) (PLINT, PLINT, PLPointer),
PLPointer f2eval_data,
PLINT nx, PLINT ny, PLINT kx, PLINT lx,
PLINT ky, PLINT ly, PLFLT *clevel, PLINT nlevel,
void (*pltr) (PLFLT, PLFLT, PLFLT *, PLFLT *, PLPointer),
PLPointer pltr_data);
/* Copies state parameters from the reference stream to the current stream. */
PLDLLIMPEXP void
c_plcpstrm(PLINT iplsr, PLBOOL flags);
/* Converts input values from relative device coordinates to relative plot */
/* coordinates. */
PLDLLIMPEXP void
pldid2pc(PLFLT *xmin, PLFLT *ymin, PLFLT *xmax, PLFLT *ymax);
/* Converts input values from relative plot coordinates to relative */
/* device coordinates. */
PLDLLIMPEXP void
pldip2dc(PLFLT *xmin, PLFLT *ymin, PLFLT *xmax, PLFLT *ymax);
/* End a plotting session for all open streams. */
PLDLLIMPEXP void
c_plend(void);
/* End a plotting session for the current stream only. */
PLDLLIMPEXP void
c_plend1(void);
/* Simple interface for defining viewport and window. */
PLDLLIMPEXP void
c_plenv(PLFLT xmin, PLFLT xmax, PLFLT ymin, PLFLT ymax,
PLINT just, PLINT axis);
/* similar to plenv() above, but in multiplot mode does not advance the subpage,
instead the current subpage is cleared */
PLDLLIMPEXP void
c_plenv0(PLFLT xmin, PLFLT xmax, PLFLT ymin, PLFLT ymax,
PLINT just, PLINT axis);
/* End current page. Should only be used with plbop(). */
PLDLLIMPEXP void
c_pleop(void);
/* Plot horizontal error bars (xmin(i),y(i)) to (xmax(i),y(i)) */
PLDLLIMPEXP void
c_plerrx(PLINT n, PLFLT *xmin, PLFLT *xmax, PLFLT *y);
/* Plot vertical error bars (x,ymin(i)) to (x(i),ymax(i)) */
PLDLLIMPEXP void
c_plerry(PLINT n, PLFLT *x, PLFLT *ymin, PLFLT *ymax);
/* Advance to the next family file on the next new page */
PLDLLIMPEXP void
c_plfamadv(void);
/* Pattern fills the polygon bounded by the input points. */
PLDLLIMPEXP void
c_plfill(PLINT n, PLFLT *x, PLFLT *y);
/* Pattern fills the 3d polygon bounded by the input points. */
PLDLLIMPEXP void
c_plfill3(PLINT n, PLFLT *x, PLFLT *y, PLFLT *z);
/* Flushes the output stream. Use sparingly, if at all. */
PLDLLIMPEXP void
c_plflush(void);
/* Sets the global font flag to 'ifont'. */
PLDLLIMPEXP void
c_plfont(PLINT ifont);
/* Load specified font set. */
PLDLLIMPEXP void
c_plfontld(PLINT fnt);
/* Get character default height and current (scaled) height */
PLDLLIMPEXP void
c_plgchr(PLFLT *p_def, PLFLT *p_ht);
/* Returns 8 bit RGB values for given color from color map 0 */
PLDLLIMPEXP void
c_plgcol0(PLINT icol0, PLINT *r, PLINT *g, PLINT *b);
/* Returns the background color by 8 bit RGB value */
PLDLLIMPEXP void
c_plgcolbg(PLINT *r, PLINT *g, PLINT *b);
/* Returns the current compression setting */
PLDLLIMPEXP void
c_plgcompression(PLINT *compression);
/* Get the current device (keyword) name */
PLDLLIMPEXP void
c_plgdev(char *p_dev);
/* Retrieve current window into device space */
PLDLLIMPEXP void
c_plgdidev(PLFLT *p_mar, PLFLT *p_aspect, PLFLT *p_jx, PLFLT *p_jy);
/* Get plot orientation */
PLDLLIMPEXP void
c_plgdiori(PLFLT *p_rot);
/* Retrieve current window into plot space */
PLDLLIMPEXP void
c_plgdiplt(PLFLT *p_xmin, PLFLT *p_ymin, PLFLT *p_xmax, PLFLT *p_ymax);
/* Get FCI (font characterization integer) */
PLDLLIMPEXP void
c_plgfci(PLUNICODE *pfci);
/* Get family file parameters */
PLDLLIMPEXP void
c_plgfam(PLINT *p_fam, PLINT *p_num, PLINT *p_bmax);
/* Get the (current) output file name. Must be preallocated to >80 bytes */
PLDLLIMPEXP void
c_plgfnam(char *fnam);
/* Get the (current) run level. */
PLDLLIMPEXP void
c_plglevel(PLINT *p_level);
/* Get output device parameters. */
PLDLLIMPEXP void
c_plgpage(PLFLT *p_xp, PLFLT *p_yp,
PLINT *p_xleng, PLINT *p_yleng, PLINT *p_xoff, PLINT *p_yoff);
/* Switches to graphics screen. */
PLDLLIMPEXP void
c_plgra(void);
/* grid irregularly sampled data */
PLDLLIMPEXP void
c_plgriddata(PLFLT *x, PLFLT *y, PLFLT *z, PLINT npts,
PLFLT *xg, PLINT nptsx, PLFLT *yg, PLINT nptsy,
PLFLT **zg, PLINT type, PLFLT data);
/* type of gridding algorithm for plgriddata() */
#define GRID_CSA 1 /* Bivariate Cubic Spline approximation */
#define GRID_DTLI 2 /* Delaunay Triangulation Linear Interpolation */
#define GRID_NNI 3 /* Natural Neighbors Interpolation */
#define GRID_NNIDW 4 /* Nearest Neighbors Inverse Distance Weighted */
#define GRID_NNLI 5 /* Nearest Neighbors Linear Interpolation */
#define GRID_NNAIDW 6 /* Nearest Neighbors Around Inverse Distance Weighted */
/* Get subpage boundaries in absolute coordinates */
PLDLLIMPEXP void
c_plgspa(PLFLT *xmin, PLFLT *xmax, PLFLT *ymin, PLFLT *ymax);
/* Get current stream number. */
PLDLLIMPEXP void
c_plgstrm(PLINT *p_strm);
/* Get the current library version number */
PLDLLIMPEXP void
c_plgver(char *p_ver);
/* Get viewport boundaries in normalized device coordinates */
PLDLLIMPEXP void
c_plgvpd(PLFLT *p_xmin, PLFLT *p_xmax, PLFLT *p_ymin, PLFLT *p_ymax);
/* Get viewport boundaries in world coordinates */
PLDLLIMPEXP void
c_plgvpw(PLFLT *p_xmin, PLFLT *p_xmax, PLFLT *p_ymin, PLFLT *p_ymax);
/* Get x axis labeling parameters */
PLDLLIMPEXP void
c_plgxax(PLINT *p_digmax, PLINT *p_digits);
/* Get y axis labeling parameters */
PLDLLIMPEXP void
c_plgyax(PLINT *p_digmax, PLINT *p_digits);
/* Get z axis labeling parameters */
PLDLLIMPEXP void
c_plgzax(PLINT *p_digmax, PLINT *p_digits);
/* Draws a histogram of n values of a variable in array data[0..n-1] */
/* Flags for plhist() - opt argument; note: some flags are passed to
plbin() for the actual plotting */
#define PL_HIST_DEFAULT 0
#define PL_HIST_NOSCALING 1
#define PL_HIST_IGNORE_OUTLIERS 2
#define PL_HIST_NOEXPAND 8
#define PL_HIST_NOEMPTY 16
PLDLLIMPEXP void
c_plhist(PLINT n, PLFLT *data, PLFLT datmin, PLFLT datmax,
PLINT nbin, PLINT opt);
/* Set current color (map 0) by hue, lightness, and saturation. */
PLDLLIMPEXP void
c_plhls(PLFLT h, PLFLT l, PLFLT s);
/* Functions for converting between HLS and RGB color space */
PLDLLIMPEXP void
c_plhlsrgb(PLFLT h, PLFLT l, PLFLT s, PLFLT *p_r, PLFLT *p_g, PLFLT *p_b);
/* Initializes PLplot, using preset or default options */
PLDLLIMPEXP void
c_plinit(void);
/* Draws a line segment from (x1, y1) to (x2, y2). */
PLDLLIMPEXP void
c_pljoin(PLFLT x1, PLFLT y1, PLFLT x2, PLFLT y2);
/* Simple routine for labelling graphs. */
PLDLLIMPEXP void
c_pllab(const char *xlabel, const char *ylabel, const char *tlabel);
/* Sets position of the light source */
PLDLLIMPEXP void
c_pllightsource(PLFLT x, PLFLT y, PLFLT z);
/* Draws line segments connecting a series of points. */
PLDLLIMPEXP void
c_plline(PLINT n, PLFLT *x, PLFLT *y);
/* Draws a line in 3 space. */
PLDLLIMPEXP void
c_plline3(PLINT n, PLFLT *x, PLFLT *y, PLFLT *z);
/* Set line style. */
PLDLLIMPEXP void
c_pllsty(PLINT lin);
/* plot continental outline in world coordinates */
PLDLLIMPEXP void
c_plmap( void (*mapform)(PLINT, PLFLT *, PLFLT *), char *type,
PLFLT minlong, PLFLT maxlong, PLFLT minlat, PLFLT maxlat );
/* Plot the latitudes and longitudes on the background. */
PLDLLIMPEXP void
c_plmeridians( void (*mapform)(PLINT, PLFLT *, PLFLT *),
PLFLT dlong, PLFLT dlat,
PLFLT minlong, PLFLT maxlong, PLFLT minlat, PLFLT maxlat );
/* Plots a mesh representation of the function z[x][y]. */
PLDLLIMPEXP void
c_plmesh(PLFLT *x, PLFLT *y, PLFLT **z, PLINT nx, PLINT ny, PLINT opt);
/* Plots a mesh representation of the function z[x][y] with contour */
PLDLLIMPEXP void
c_plmeshc(PLFLT *x, PLFLT *y, PLFLT **z, PLINT nx, PLINT ny, PLINT opt,
PLFLT *clevel, PLINT nlevel);
/* Creates a new stream and makes it the default. */
PLDLLIMPEXP void
c_plmkstrm(PLINT *p_strm);
/* Prints out "text" at specified position relative to viewport */
PLDLLIMPEXP void
c_plmtex(const char *side, PLFLT disp, PLFLT pos, PLFLT just,
const char *text);
/* Plots a 3-d representation of the function z[x][y]. */
PLDLLIMPEXP void
c_plot3d(PLFLT *x, PLFLT *y, PLFLT **z,
PLINT nx, PLINT ny, PLINT opt, PLBOOL side);
/* Plots a 3-d representation of the function z[x][y] with contour. */
PLDLLIMPEXP void
c_plot3dc(PLFLT *x, PLFLT *y, PLFLT **z,
PLINT nx, PLINT ny, PLINT opt,
PLFLT *clevel, PLINT nlevel);
/* Plots a 3-d representation of the function z[x][y] with contour and
* y index limits. */
PLDLLIMPEXP void
c_plot3dcl(PLFLT *x, PLFLT *y, PLFLT **z,
PLINT nx, PLINT ny, PLINT opt,
PLFLT *clevel, PLINT nlevel,
PLINT ixstart, PLINT ixn, PLINT *indexymin, PLINT*indexymax);
/*
* definitions for the opt argument in plot3dc() and plsurf3d()
*
* DRAW_LINEX *must* be 1 and DRAW_LINEY *must* be 2, because of legacy code!
*/
#define DRAW_LINEX (1 << 0) /* draw lines parallel to the X axis */
#define DRAW_LINEY (1 << 1) /* draw lines parallel to the Y axis */
#define DRAW_LINEXY (DRAW_LINEX | DRAW_LINEY) /* draw lines parallel to both the X and Y axis */
#define MAG_COLOR (1 << 2) /* draw the mesh with a color dependent of the magnitude */
#define BASE_CONT (1 << 3) /* draw contour plot at bottom xy plane */
#define TOP_CONT (1 << 4) /* draw contour plot at top xy plane */
#define SURF_CONT (1 << 5) /* draw contour plot at surface */
#define DRAW_SIDES (1 << 6) /* draw sides */
#define FACETED (1 << 7) /* draw outline for each square that makes up the surface */
#define MESH (1 << 8) /* draw mesh */
/*
* valid options for plot3dc():
*
* DRAW_SIDES, BASE_CONT, TOP_CONT (not yet),
* MAG_COLOR, DRAW_LINEX, DRAW_LINEY, DRAW_LINEXY.
*
* valid options for plsurf3d():
*
* MAG_COLOR, BASE_CONT, SURF_CONT, FACETED, DRAW_SIDES.
*/
/* Set fill pattern directly. */
PLDLLIMPEXP void
c_plpat(PLINT nlin, PLINT *inc, PLINT *del);
/* Plots array y against x for n points using ASCII code "code".*/
PLDLLIMPEXP void
c_plpoin(PLINT n, PLFLT *x, PLFLT *y, PLINT code);
/* Draws a series of points in 3 space. */
PLDLLIMPEXP void
c_plpoin3(PLINT n, PLFLT *x, PLFLT *y, PLFLT *z, PLINT code);
/* Draws a polygon in 3 space. */
PLDLLIMPEXP void
c_plpoly3(PLINT n, PLFLT *x, PLFLT *y, PLFLT *z, PLBOOL *draw, PLBOOL ifcc);
/* Set the floating point precision (in number of places) in numeric labels. */
PLDLLIMPEXP void
c_plprec(PLINT setp, PLINT prec);
/* Set fill pattern, using one of the predefined patterns.*/
PLDLLIMPEXP void
c_plpsty(PLINT patt);
/* Prints out "text" at world cooordinate (x,y). */
PLDLLIMPEXP void
c_plptex(PLFLT x, PLFLT y, PLFLT dx, PLFLT dy, PLFLT just, const char *text);
/* Replays contents of plot buffer to current device/file. */
PLDLLIMPEXP void
c_plreplot(void);
/* Set line color by red, green, blue from 0. to 1. */
PLDLLIMPEXP void
c_plrgb(PLFLT r, PLFLT g, PLFLT b);
/* Set line color by 8 bit RGB values. */
PLDLLIMPEXP void
c_plrgb1(PLINT r, PLINT g, PLINT b);
/* Functions for converting between HLS and RGB color space */
PLDLLIMPEXP void
c_plrgbhls(PLFLT r, PLFLT g, PLFLT b, PLFLT *p_h, PLFLT *p_l, PLFLT *p_s);
/* Set character height. */
PLDLLIMPEXP void
c_plschr(PLFLT def, PLFLT scale);
/* Set color map 0 colors by 8 bit RGB values */
PLDLLIMPEXP void
c_plscmap0(PLINT *r, PLINT *g, PLINT *b, PLINT ncol0);
/* Set number of colors in cmap 0 */
PLDLLIMPEXP void
c_plscmap0n(PLINT ncol0);
/* Set color map 1 colors by 8 bit RGB values */
PLDLLIMPEXP void
c_plscmap1(PLINT *r, PLINT *g, PLINT *b, PLINT ncol1);
/* Set color map 1 colors using a piece-wise linear relationship between */
/* intensity [0,1] (cmap 1 index) and position in HLS or RGB color space. */
PLDLLIMPEXP void
c_plscmap1l(PLBOOL itype, PLINT npts, PLFLT *intensity,
PLFLT *coord1, PLFLT *coord2, PLFLT *coord3, PLBOOL *rev);
/* Set number of colors in cmap 1 */
PLDLLIMPEXP void
c_plscmap1n(PLINT ncol1);
/* Set a given color from color map 0 by 8 bit RGB value */
PLDLLIMPEXP void
c_plscol0(PLINT icol0, PLINT r, PLINT g, PLINT b);
/* Set the background color by 8 bit RGB value */
PLDLLIMPEXP void
c_plscolbg(PLINT r, PLINT g, PLINT b);
/* Used to globally turn color output on/off */
PLDLLIMPEXP void
c_plscolor(PLINT color);
/* Set the compression level */
PLDLLIMPEXP void
c_plscompression(PLINT compression);
/* Set the device (keyword) name */
PLDLLIMPEXP void
c_plsdev(const char *devname);
/* Set window into device space using margin, aspect ratio, and */
/* justification */
PLDLLIMPEXP void
c_plsdidev(PLFLT mar, PLFLT aspect, PLFLT jx, PLFLT jy);
/* Set up transformation from metafile coordinates. */
PLDLLIMPEXP void
c_plsdimap(PLINT dimxmin, PLINT dimxmax, PLINT dimymin, PLINT dimymax,
PLFLT dimxpmm, PLFLT dimypmm);
/* Set plot orientation, specifying rotation in units of pi/2. */
PLDLLIMPEXP void
c_plsdiori(PLFLT rot);
/* Set window into plot space */
PLDLLIMPEXP void
c_plsdiplt(PLFLT xmin, PLFLT ymin, PLFLT xmax, PLFLT ymax);
/* Set window into plot space incrementally (zoom) */
PLDLLIMPEXP void
c_plsdiplz(PLFLT xmin, PLFLT ymin, PLFLT xmax, PLFLT ymax);
/* Set the escape character for text strings. */
PLDLLIMPEXP void
c_plsesc(char esc);
/* Set family file parameters */
PLDLLIMPEXP void
c_plsfam(PLINT fam, PLINT num, PLINT bmax);
/* Set FCI (font characterization integer) */
PLDLLIMPEXP void
c_plsfci(PLUNICODE fci);
/* Set the output file name. */
PLDLLIMPEXP void
c_plsfnam(const char *fnam);
PLDLLIMPEXP void
c_plxsfnam(const char *fnam, const char *ext);
/* Shade region. */
PLDLLIMPEXP void
c_plshade(PLFLT **a, PLINT nx, PLINT ny, PLINT (*defined) (PLFLT, PLFLT),
PLFLT left, PLFLT right, PLFLT bottom, PLFLT top,
PLFLT shade_min, PLFLT shade_max,
PLINT sh_cmap, PLFLT sh_color, PLINT sh_width,
PLINT min_color, PLINT min_width,
PLINT max_color, PLINT max_width,
void (*fill) (PLINT, PLFLT *, PLFLT *), PLBOOL rectangular,
void (*pltr) (PLFLT, PLFLT, PLFLT *, PLFLT *, PLPointer),
PLPointer pltr_data);
PLDLLIMPEXP void
c_plshade1(PLFLT *a, PLINT nx, PLINT ny, PLINT (*defined) (PLFLT, PLFLT),
PLFLT left, PLFLT right, PLFLT bottom, PLFLT top,
PLFLT shade_min, PLFLT shade_max,
PLINT sh_cmap, PLFLT sh_color, PLINT sh_width,
PLINT min_color, PLINT min_width,
PLINT max_color, PLINT max_width,
void (*fill) (PLINT, PLFLT *, PLFLT *), PLBOOL rectangular,
void (*pltr) (PLFLT, PLFLT, PLFLT *, PLFLT *, PLPointer),
PLPointer pltr_data);
PLDLLIMPEXP void
c_plshades( PLFLT **a, PLINT nx, PLINT ny, PLINT (*defined) (PLFLT, PLFLT),
PLFLT xmin, PLFLT xmax, PLFLT ymin, PLFLT ymax,
PLFLT *clevel, PLINT nlevel, PLINT fill_width,
PLINT cont_color, PLINT cont_width,
void (*fill) (PLINT, PLFLT *, PLFLT *), PLBOOL rectangular,
void (*pltr) (PLFLT, PLFLT, PLFLT *, PLFLT *, PLPointer),
PLPointer pltr_data);
PLDLLIMPEXP void
plfshade(PLFLT (*f2eval) (PLINT, PLINT, PLPointer),
PLPointer f2eval_data,
PLFLT (*c2eval) (PLINT, PLINT, PLPointer),
PLPointer c2eval_data,
PLINT nx, PLINT ny,
PLFLT left, PLFLT right, PLFLT bottom, PLFLT top,
PLFLT shade_min, PLFLT shade_max,
PLINT sh_cmap, PLFLT sh_color, PLINT sh_width,
PLINT min_color, PLINT min_width,
PLINT max_color, PLINT max_width,
void (*fill) (PLINT, PLFLT *, PLFLT *), PLBOOL rectangular,
void (*pltr) (PLFLT, PLFLT, PLFLT *, PLFLT *, PLPointer),
PLPointer pltr_data);
/* Set up lengths of major tick marks. */
PLDLLIMPEXP void
c_plsmaj(PLFLT def, PLFLT scale);
/* Set the memory area to be plotted (with the 'mem' driver) */
PLDLLIMPEXP void
c_plsmem(PLINT maxx, PLINT maxy, void *plotmem);
/* Set up lengths of minor tick marks. */
PLDLLIMPEXP void
c_plsmin(PLFLT def, PLFLT scale);
/* Set orientation. Must be done before calling plinit. */
PLDLLIMPEXP void
c_plsori(PLINT ori);
/* Set output device parameters. Usually ignored by the driver. */
PLDLLIMPEXP void
c_plspage(PLFLT xp, PLFLT yp, PLINT xleng, PLINT yleng,
PLINT xoff, PLINT yoff);
/* Set the pause (on end-of-page) status */
PLDLLIMPEXP void
c_plspause(PLBOOL pause);
/* Set stream number. */
PLDLLIMPEXP void
c_plsstrm(PLINT strm);
/* Set the number of subwindows in x and y */
PLDLLIMPEXP void
c_plssub(PLINT nx, PLINT ny);
/* Set symbol height. */
PLDLLIMPEXP void
c_plssym(PLFLT def, PLFLT scale);
/* Initialize PLplot, passing in the windows/page settings. */
PLDLLIMPEXP void
c_plstar(PLINT nx, PLINT ny);
/* Initialize PLplot, passing the device name and windows/page settings. */
PLDLLIMPEXP void
c_plstart(const char *devname, PLINT nx, PLINT ny);
/* Add a point to a stripchart. */
PLDLLIMPEXP void
c_plstripa(PLINT id, PLINT pen, PLFLT x, PLFLT y);
/* Create 1d stripchart */
PLDLLIMPEXP void
c_plstripc(PLINT *id, char *xspec, char *yspec,
PLFLT xmin, PLFLT xmax, PLFLT xjump, PLFLT ymin, PLFLT ymax,
PLFLT xlpos, PLFLT ylpos,
PLBOOL y_ascl, PLBOOL acc,
PLINT colbox, PLINT collab,
PLINT colline[], PLINT styline[], char *legline[],
char *labx, char *laby, char *labtop);
/* Deletes and releases memory used by a stripchart. */
PLDLLIMPEXP void
c_plstripd(PLINT id);
/* plots a 2d image (or a matrix too large for plshade() ) */
PLDLLIMPEXP void
plimage( PLFLT **data, PLINT nx, PLINT ny,
PLFLT xmin, PLFLT xmax, PLFLT ymin, PLFLT ymax, PLFLT zmin, PLFLT zmax,
PLFLT Dxmin, PLFLT Dxmax, PLFLT Dymin, PLFLT Dymax);
/* Set up a new line style */
PLDLLIMPEXP void
c_plstyl(PLINT nms, PLINT *mark, PLINT *space);
/* Plots the 3d surface representation of the function z[x][y]. */
PLDLLIMPEXP void
c_plsurf3d(PLFLT *x, PLFLT *y, PLFLT **z, PLINT nx, PLINT ny,
PLINT opt, PLFLT *clevel, PLINT nlevel);
/* Plots the 3d surface representation of the function z[x][y] with y
* index limits. */
PLDLLIMPEXP void
c_plsurf3dl(PLFLT *x, PLFLT *y, PLFLT **z, PLINT nx, PLINT ny,
PLINT opt, PLFLT *clevel, PLINT nlevel,
PLINT ixstart, PLINT ixn, PLINT *indexymin, PLINT*indexymax);
/* Sets the edges of the viewport to the specified absolute coordinates */
PLDLLIMPEXP void
c_plsvpa(PLFLT xmin, PLFLT xmax, PLFLT ymin, PLFLT ymax);
/* Set x axis labeling parameters */
PLDLLIMPEXP void
c_plsxax(PLINT digmax, PLINT digits);
/* Set inferior X window */
PLDLLIMPEXP void
plsxwin(PLINT window_id);
/* Set y axis labeling parameters */
PLDLLIMPEXP void
c_plsyax(PLINT digmax, PLINT digits);
/* Plots array y against x for n points using Hershey symbol "code" */
PLDLLIMPEXP void
c_plsym(PLINT n, PLFLT *x, PLFLT *y, PLINT code);
/* Set z axis labeling parameters */
PLDLLIMPEXP void
c_plszax(PLINT digmax, PLINT digits);
/* Switches to text screen. */
PLDLLIMPEXP void
c_pltext(void);
/* Sets the edges of the viewport with the given aspect ratio, leaving */
/* room for labels. */
PLDLLIMPEXP void
c_plvasp(PLFLT aspect);
/* Creates the largest viewport of the specified aspect ratio that fits */
/* within the specified normalized subpage coordinates. */
PLDLLIMPEXP void
c_plvpas(PLFLT xmin, PLFLT xmax, PLFLT ymin, PLFLT ymax, PLFLT aspect);
/* Creates a viewport with the specified normalized subpage coordinates. */
PLDLLIMPEXP void
c_plvpor(PLFLT xmin, PLFLT xmax, PLFLT ymin, PLFLT ymax);
/* Defines a "standard" viewport with seven character heights for */
/* the left margin and four character heights everywhere else. */
PLDLLIMPEXP void
c_plvsta(void);
/* Set up a window for three-dimensional plotting. */
PLDLLIMPEXP void
c_plw3d(PLFLT basex, PLFLT basey, PLFLT height, PLFLT xmin0,
PLFLT xmax0, PLFLT ymin0, PLFLT ymax0, PLFLT zmin0,
PLFLT zmax0, PLFLT alt, PLFLT az);
/* Set pen width. */
PLDLLIMPEXP void
c_plwid(PLINT width);
/* Set up world coordinates of the viewport boundaries (2d plots). */
PLDLLIMPEXP void
c_plwind(PLFLT xmin, PLFLT xmax, PLFLT ymin, PLFLT ymax);
/* set xor mode; mode = 1-enter, 0-leave, status = 0 if not interactive device */
PLDLLIMPEXP void
c_plxormod(PLBOOL mode, PLBOOL *status);
/*--------------------------------------------------------------------------*\
* Functions for use from C or C++ only
\*--------------------------------------------------------------------------*/
/* Returns a list of file-oriented device names and their menu strings */
PLDLLIMPEXP void /* pmr: const */
plgFileDevs(const char ***p_menustr, const char ***p_devname, int *p_ndev);
/* Returns a list of all device names and their menu strings */
PLDLLIMPEXP void /* pmr: const */
plgDevs(const char ***p_menustr, const char ***p_devname, int *p_ndev);
/* Set the function pointer for the keyboard event handler */
PLDLLIMPEXP void
plsKeyEH(void (*KeyEH) (PLGraphicsIn *, void *, int *), void *KeyEH_data);
/* Set the function pointer for the (mouse) button event handler */
PLDLLIMPEXP void
plsButtonEH(void (*ButtonEH) (PLGraphicsIn *, void *, int *),
void *ButtonEH_data);
/* Sets an optional user bop handler */
PLDLLIMPEXP void
plsbopH(void (*handler) (void *, int *), void *handler_data);
/* Sets an optional user eop handler */
PLDLLIMPEXP void
plseopH(void (*handler) (void *, int *), void *handler_data);
/* Set the variables to be used for storing error info */
PLDLLIMPEXP void
plsError(PLINT *errcode, char *errmsg);
/* Sets an optional user exit handler. */
PLDLLIMPEXP void
plsexit(int (*handler) (const char *));
/* Sets an optional user abort handler. */
PLDLLIMPEXP void
plsabort(void (*handler) (const char *));
/* Transformation routines */
/* Identity transformation. */
PLDLLIMPEXP void
pltr0(PLFLT x, PLFLT y, PLFLT *tx, PLFLT *ty, PLPointer pltr_data);
/* Does linear interpolation from singly dimensioned coord arrays. */
PLDLLIMPEXP void
pltr1(PLFLT x, PLFLT y, PLFLT *tx, PLFLT *ty, PLPointer pltr_data);
/* Does linear interpolation from doubly dimensioned coord arrays */
/* (column dominant, as per normal C 2d arrays). */
PLDLLIMPEXP void
pltr2(PLFLT x, PLFLT y, PLFLT *tx, PLFLT *ty, PLPointer pltr_data);
/* Just like pltr2() but uses pointer arithmetic to get coordinates from */
/* 2d grid tables. */
PLDLLIMPEXP void
pltr2p(PLFLT x, PLFLT y, PLFLT *tx, PLFLT *ty, PLPointer pltr_data);
/* Identity transformation for plots from Fortran. */
PLDLLIMPEXP void
pltr0f(PLFLT x, PLFLT y, PLFLT *tx, PLFLT *ty, void *pltr_data);
/* Does linear interpolation from doubly dimensioned coord arrays */
/* (row dominant, i.e. Fortran ordering). */
PLDLLIMPEXP void
pltr2f(PLFLT x, PLFLT y, PLFLT *tx, PLFLT *ty, void *pltr_data);
/* Function evaluators */
/* Does a lookup from a 2d function array. Array is of type (PLFLT **), */
/* and is column dominant (normal C ordering). */
PLDLLIMPEXP PLFLT
plf2eval2(PLINT ix, PLINT iy, PLPointer plf2eval_data);
/* Does a lookup from a 2d function array. Array is of type (PLFLT *), */
/* and is column dominant (normal C ordering). */
PLDLLIMPEXP PLFLT
plf2eval(PLINT ix, PLINT iy, PLPointer plf2eval_data);
/* Does a lookup from a 2d function array. Array is of type (PLFLT *), */
/* and is row dominant (Fortran ordering). */
PLDLLIMPEXP PLFLT
plf2evalr(PLINT ix, PLINT iy, PLPointer plf2eval_data);
/* Command line parsing utilities */
/* Clear internal option table info structure. */
PLDLLIMPEXP void
plClearOpts(void);
/* Reset internal option table info structure. */
PLDLLIMPEXP void
plResetOpts(void);
/* Merge user option table into internal info structure. */
PLDLLIMPEXP int /* pmr: const */
plMergeOpts(PLOptionTable *options, const char *name, const char **notes);
/* Set the strings used in usage and syntax messages. */
PLDLLIMPEXP void /* pmr: const */
plSetUsage(const char *program_string, const char *usage_string);
/* Process input strings, treating them as an option and argument pair. */
/* The first is for the external API, the second the work routine declared
here for backward compatibilty. */
PLDLLIMPEXP int
c_plsetopt(char *opt, char *myoptarg);
PLDLLIMPEXP int
plSetOpt(char *opt, char *myoptarg);
/* Process options list using current options info. */
PLDLLIMPEXP int
c_plparseopts(int *p_argc, char **argv, PLINT mode);
/* Print usage & syntax message. */
PLDLLIMPEXP void
plOptUsage(void);
/* Miscellaneous */
/* Set the output file pointer */
PLDLLIMPEXP void
plgfile(FILE **p_file);
/* Get the output file pointer */
PLDLLIMPEXP void
plsfile(FILE *file);
/* Get the escape character for text strings. */
PLDLLIMPEXP void
plgesc(unsigned char *p_esc);
/* Front-end to driver escape function. */
PLDLLIMPEXP void
pl_cmd(PLINT op, void *ptr);
/* Return full pathname for given file if executable */
PLDLLIMPEXP int
plFindName(char *p);
/* Looks for the specified executable file according to usual search path. */
PLDLLIMPEXP char *
plFindCommand(char *fn);
/* Gets search name for file by concatenating the dir, subdir, and file */
/* name, allocating memory as needed. */
PLDLLIMPEXP void
plGetName(const char *dir, const char *subdir, const char *filename,
char **filespec);
/* Prompts human to input an integer in response to given message. */
PLDLLIMPEXP PLINT
plGetInt(char *s);
/* Prompts human to input a float in response to given message. */
PLDLLIMPEXP PLFLT
plGetFlt(char *s);
/* Nice way to allocate space for a vectored 2d grid */
/* Allocates a block of memory for use as a 2-d grid of PLFLT's. */
PLDLLIMPEXP void
plAlloc2dGrid(PLFLT ***f, PLINT nx, PLINT ny);
/* Frees a block of memory allocated with plAlloc2dGrid(). */
PLDLLIMPEXP void
plFree2dGrid(PLFLT **f, PLINT nx, PLINT ny);
/* Find the maximum and minimum of a 2d matrix allocated with plAllc2dGrid(). */
PLDLLIMPEXP void
plMinMax2dGrid(PLFLT **f, PLINT nx, PLINT ny, PLFLT *ppfmax, PLFLT *ppfmin);
/* Wait for graphics input event and translate to world coordinates */
PLDLLIMPEXP int
plGetCursor(PLGraphicsIn *gin);
/* Translates relative device coordinates to world coordinates. */
PLDLLIMPEXP int
plTranslateCursor(PLGraphicsIn *gin);
/* Deprecated function names which are handled as wrappers for strict
* backwards compatibility of the library API*/
PLDLLIMPEXP int
plParseOpts(int *p_argc, char **argv, PLINT mode);
PLDLLIMPEXP void
plHLS_RGB(PLFLT h, PLFLT l, PLFLT s, PLFLT *p_r, PLFLT *p_g, PLFLT *p_b);
PLDLLIMPEXP void
plRGB_HLS(PLFLT r, PLFLT g, PLFLT b, PLFLT *p_h, PLFLT *p_l, PLFLT *p_s);
#ifdef __cplusplus
}
#endif
#endif /* __PLPLOT_H__ */