# Makefile.in generated by automake 1.11.1 from Makefile.am.
# Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.




VPATH = ../.././libitm
pkgdatadir = $(datadir)/libitm
pkgincludedir = $(includedir)/libitm
pkglibdir = $(libdir)/libitm
pkglibexecdir = $(libexecdir)/libitm
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-unknown-linux-gnu
host_triplet = x86_64-unknown-linux-gnu
target_triplet = x86_64-unknown-linux-gnu
#am__append_1 = hwcap.cc
am__append_2 = x86_sse.cc x86_avx.cc
am__append_3 = futex.cc
subdir = .
DIST_COMMON = ChangeLog $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
	$(top_srcdir)/configure $(am__configure_deps) \
	$(srcdir)/config.h.in $(srcdir)/../mkinstalldirs \
	$(srcdir)/libitm.spec.in $(srcdir)/../depcomp
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
	$(top_srcdir)/../config/asmcfi.m4 \
	$(top_srcdir)/../config/depstand.m4 \
	$(top_srcdir)/../config/enable.m4 \
	$(top_srcdir)/../config/futex.m4 \
	$(top_srcdir)/../config/lead-dot.m4 \
	$(top_srcdir)/../config/mmap.m4 \
	$(top_srcdir)/../config/multi.m4 \
	$(top_srcdir)/../config/override.m4 \
	$(top_srcdir)/../config/stdint.m4 \
	$(top_srcdir)/../config/tls.m4 \
	$(top_srcdir)/../config/weakref.m4 \
	$(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
	$(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
	$(top_srcdir)/acinclude.m4 $(top_srcdir)/../libtool.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = libitm.spec
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__installdirs = "$(DESTDIR)$(toolexeclibdir)" "$(DESTDIR)$(infodir)" \
	"$(DESTDIR)$(toolexeclibdir)"
LTLIBRARIES = $(toolexeclib_LTLIBRARIES)
libitm_la_LIBADD =
#am__objects_1 = hwcap.lo
am__objects_2 = x86_sse.lo x86_avx.lo
am__objects_3 = futex.lo
am_libitm_la_OBJECTS = aatree.lo alloc.lo alloc_c.lo alloc_cpp.lo \
	barrier.lo beginend.lo clone.lo eh_cpp.lo local.lo query.lo \
	retry.lo rwlock.lo useraction.lo util.lo sjlj.lo tls.lo \
	method-serial.lo method-gl.lo method-ml.lo $(am__objects_1) \
	$(am__objects_2) $(am__objects_3)
libitm_la_OBJECTS = $(am_libitm_la_OBJECTS)
DEFAULT_INCLUDES = -I. -I$(srcdir)
depcomp = $(SHELL) $(top_srcdir)/../depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
CPPASCOMPILE = $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS)
LTCPPASCOMPILE = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=compile $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS)
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
CXXLD = $(CXX)
CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \
	$(LDFLAGS) -o $@
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
	$(LDFLAGS) -o $@
SOURCES = $(libitm_la_SOURCES)
MULTISRCTOP = 
MULTIBUILDTOP = 
MULTIDIRS = 
MULTISUBDIR = 
MULTIDO = true
MULTICLEAN = true
INFO_DEPS = libitm.info
am__TEXINFO_TEX_DIR = $(srcdir)/../gcc/doc/include
DVIS = libitm.dvi
PDFS = libitm.pdf
PSS = libitm.ps
HTMLS = libitm.html
TEXINFOS = libitm.texi
TEXI2DVI = texi2dvi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
HEADERS = $(nodist_toolexeclib_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
ACLOCAL = ${SHELL} /gcc-4.9.3/missing --run aclocal-1.11
AMTAR = ${SHELL} /gcc-4.9.3/missing --run tar
AR = ar
AUTOCONF = ${SHELL} /gcc-4.9.3/missing --run autoconf
AUTOHEADER = ${SHELL} /gcc-4.9.3/missing --run autoheader
AUTOMAKE = ${SHELL} /gcc-4.9.3/missing --run automake-1.11
AWK = gawk
CC = /gcc-4.9.3/host-x86_64-unknown-linux-gnu/gcc/xgcc -B/gcc-4.9.3/host-x86_64-unknown-linux-gnu/gcc/ -B/root/local/x86_64-unknown-linux-gnu/bin/ -B/root/local/x86_64-unknown-linux-gnu/lib/ -isystem /root/local/x86_64-unknown-linux-gnu/include -isystem /root/local/x86_64-unknown-linux-gnu/sys-include   
CCAS = /gcc-4.9.3/host-x86_64-unknown-linux-gnu/gcc/xgcc -B/gcc-4.9.3/host-x86_64-unknown-linux-gnu/gcc/ -B/root/local/x86_64-unknown-linux-gnu/bin/ -B/root/local/x86_64-unknown-linux-gnu/lib/ -isystem /root/local/x86_64-unknown-linux-gnu/include -isystem /root/local/x86_64-unknown-linux-gnu/sys-include   
CCASDEPMODE = depmode=gcc3
CCASFLAGS = -g -O2
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2 -pthread
CPP = /gcc-4.9.3/host-x86_64-unknown-linux-gnu/gcc/xgcc -B/gcc-4.9.3/host-x86_64-unknown-linux-gnu/gcc/ -B/root/local/x86_64-unknown-linux-gnu/bin/ -B/root/local/x86_64-unknown-linux-gnu/lib/ -isystem /root/local/x86_64-unknown-linux-gnu/include -isystem /root/local/x86_64-unknown-linux-gnu/sys-include    -E
CPPFLAGS = 
CXX =  /gcc-4.9.3/host-x86_64-unknown-linux-gnu/gcc/xg++ -B/gcc-4.9.3/host-x86_64-unknown-linux-gnu/gcc/ -nostdinc++ -nostdinc++ -I/gcc-4.9.3/x86_64-unknown-linux-gnu/libstdc++-v3/include/x86_64-unknown-linux-gnu -I/gcc-4.9.3/x86_64-unknown-linux-gnu/libstdc++-v3/include -I/gcc-4.9.3/libstdc++-v3/libsupc++ -I/gcc-4.9.3/libstdc++-v3/include/backward -I/gcc-4.9.3/libstdc++-v3/testsuite/util -L/gcc-4.9.3/x86_64-unknown-linux-gnu/libstdc++-v3/src -L/gcc-4.9.3/x86_64-unknown-linux-gnu/libstdc++-v3/src/.libs -L/gcc-4.9.3/x86_64-unknown-linux-gnu/libstdc++-v3/libsupc++/.libs -B/root/local/x86_64-unknown-linux-gnu/bin/ -B/root/local/x86_64-unknown-linux-gnu/lib/ -isystem /root/local/x86_64-unknown-linux-gnu/include -isystem /root/local/x86_64-unknown-linux-gnu/sys-include   
CXXCPP =  /gcc-4.9.3/host-x86_64-unknown-linux-gnu/gcc/xg++ -B/gcc-4.9.3/host-x86_64-unknown-linux-gnu/gcc/ -nostdinc++ -nostdinc++ -I/gcc-4.9.3/x86_64-unknown-linux-gnu/libstdc++-v3/include/x86_64-unknown-linux-gnu -I/gcc-4.9.3/x86_64-unknown-linux-gnu/libstdc++-v3/include -I/gcc-4.9.3/libstdc++-v3/libsupc++ -I/gcc-4.9.3/libstdc++-v3/include/backward -I/gcc-4.9.3/libstdc++-v3/testsuite/util -L/gcc-4.9.3/x86_64-unknown-linux-gnu/libstdc++-v3/src -L/gcc-4.9.3/x86_64-unknown-linux-gnu/libstdc++-v3/src/.libs -L/gcc-4.9.3/x86_64-unknown-linux-gnu/libstdc++-v3/libsupc++/.libs -B/root/local/x86_64-unknown-linux-gnu/bin/ -B/root/local/x86_64-unknown-linux-gnu/lib/ -isystem /root/local/x86_64-unknown-linux-gnu/include -isystem /root/local/x86_64-unknown-linux-gnu/sys-include    -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2 -D_GNU_SOURCE
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DSYMUTIL = 
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /usr/bin/grep -E
EXEEXT = 
FGREP = /usr/bin/grep -F
GREP = /usr/bin/grep
HWCAP_LDFLAGS = 
INSTALL = /usr/bin/install -c
INSTALL_DATA = /usr/bin/install -c -m 644
INSTALL_PROGRAM = /usr/bin/install -c
INSTALL_SCRIPT = /usr/bin/install -c
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LD = /gcc-4.9.3/host-x86_64-unknown-linux-gnu/gcc/collect-ld
LDFLAGS = 
LIBOBJS = 
LIBS = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIPO = lipo
LN_S = ln -s
LTLIBOBJS = 
MAINT = #
MAKEINFO = makeinfo --split-size=5000000
MKDIR_P = /usr/bin/mkdir -p
NM = /gcc-4.9.3/host-x86_64-unknown-linux-gnu/gcc/nm
NMEDIT = 
OBJDUMP = objdump
OBJEXT = o
OPT_LDFLAGS = -Wl,-O1 
OTOOL = 
OTOOL64 = 
PACKAGE = libitm
PACKAGE_BUGREPORT = 
PACKAGE_NAME = GNU TM Runtime Library
PACKAGE_STRING = GNU TM Runtime Library 1.0
PACKAGE_TARNAME = libitm
PACKAGE_URL = http://www.gnu.org/software/libitm/
PACKAGE_VERSION = 1.0
PATH_SEPARATOR = :
PERL = /usr/bin/perl
RANLIB = ranlib
SECTION_LDFLAGS = 
SED = /usr/bin/sed
SET_MAKE = 
SHELL = /bin/sh
STRIP = strip
VERSION = 1.0
XCFLAGS =  -mrtm -Wall -Werror  -Wc,-pthread
XLDFLAGS = 
abs_builddir = /gcc-4.9.3/x86_64-unknown-linux-gnu/libitm
abs_srcdir = /gcc-4.9.3/x86_64-unknown-linux-gnu/libitm/../.././libitm
abs_top_builddir = /gcc-4.9.3/x86_64-unknown-linux-gnu/libitm
abs_top_srcdir = /gcc-4.9.3/x86_64-unknown-linux-gnu/libitm/../.././libitm
ac_ct_CC = 
ac_ct_CXX = 
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = x86_64-unknown-linux-gnu
build_alias = x86_64-unknown-linux-gnu
build_cpu = x86_64
build_os = linux-gnu
build_vendor = unknown
builddir = .
config_path = linux/x86 linux x86 posix generic
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
enable_shared = yes
enable_static = yes
exec_prefix = ${prefix}
host = x86_64-unknown-linux-gnu
host_alias = x86_64-unknown-linux-gnu
host_cpu = x86_64
host_os = linux-gnu
host_vendor = unknown
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /gcc-4.9.3/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
libtool_VERSION = 1:0:0
link_itm = -litm %{static: }
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = /usr/bin/mkdir -p
multi_basedir = ../.././libitm/..
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /root/local
program_transform_name = s,y,y,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = ../.././libitm
sysconfdir = ${prefix}/etc
target = x86_64-unknown-linux-gnu
target_alias = x86_64-unknown-linux-gnu
target_cpu = x86_64
target_os = linux-gnu
target_vendor = unknown
toolexecdir = $(libdir)/gcc-lib/$(target_alias)
toolexeclibdir = $(libdir)/../lib64
top_build_prefix = 
top_builddir = .
top_srcdir = ../.././libitm
ACLOCAL_AMFLAGS = -I .. -I ../config
SUBDIRS = testsuite
gcc_version := $(shell cat $(top_srcdir)/../gcc/BASE-VER)
abi_version = -fabi-version=4
search_path = $(addprefix $(top_srcdir)/config/, $(config_path)) $(top_srcdir)
fincludedir = $(libdir)/gcc/$(target_alias)/$(gcc_version)/finclude
libsubincludedir = $(libdir)/gcc/$(target_alias)/$(gcc_version)/include
AM_CPPFLAGS = $(addprefix -I, $(search_path))
AM_CFLAGS = $(XCFLAGS)
AM_CXXFLAGS = $(XCFLAGS) -std=gnu++0x -funwind-tables -fno-exceptions \
	-fno-rtti $(abi_version)

AM_CCASFLAGS = $(XCFLAGS)
AM_LDFLAGS = $(XLDFLAGS) $(SECTION_LDFLAGS) $(OPT_LDFLAGS) $(HWCAP_LDFLAGS)
toolexeclib_LTLIBRARIES = libitm.la
nodist_toolexeclib_HEADERS = libitm.spec
#libitm_version_script = 
libitm_version_script = -Wl,--version-script,$(top_srcdir)/libitm.map
#libitm_version_script = -Wl,-M,libitm.map-sun
#libitm_version_dep = 
libitm_version_dep = $(top_srcdir)/libitm.map
#libitm_version_dep = libitm.map-sun
libitm_version_info = -version-info $(libtool_VERSION)

# Force link with C, not C++.  For now, while we're using C++ we don't
# want or need libstdc++.
libitm_la_DEPENDENCIES = $(libitm_version_dep)
libitm_la_LINK = $(LINK) $(libitm_la_LDFLAGS)
libitm_la_LDFLAGS = $(libitm_version_info) $(libitm_version_script)
libitm_la_SOURCES = aatree.cc alloc.cc alloc_c.cc alloc_cpp.cc \
	barrier.cc beginend.cc clone.cc eh_cpp.cc local.cc query.cc \
	retry.cc rwlock.cc useraction.cc util.cc sjlj.S tls.cc \
	method-serial.cc method-gl.cc method-ml.cc $(am__append_1) \
	$(am__append_2) $(am__append_3)

# Automake Documentation:
# If your package has Texinfo files in many directories, you can use the
# variable TEXINFO_TEX to tell Automake where to find the canonical
# `texinfo.tex' for your package. The value of this variable should be
# the relative path from the current `Makefile.am' to `texinfo.tex'.
TEXINFO_TEX = ../gcc/doc/include/texinfo.tex

# Defines info, dvi, pdf and html targets
MAKEINFOFLAGS = -I $(srcdir)/../gcc/doc/include
info_TEXINFOS = libitm.texi
STAMP_GENINSRC = 

# AM_CONDITIONAL on configure option --generated-files-in-srcdir
#STAMP_GENINSRC = stamp-geninsrc
#STAMP_BUILD_INFO = 

# AM_CONDITIONAL on configure check ACX_CHECK_PROG_VER([MAKEINFO])
STAMP_BUILD_INFO = stamp-build-info
CLEANFILES = $(STAMP_GENINSRC) $(STAMP_BUILD_INFO) libitm.info
MAINTAINERCLEANFILES = $(srcdir)/libitm.info
all: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
.SUFFIXES: .S .cc .dvi .lo .o .obj .ps
am--refresh:
	@:
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: # $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

config.h: stamp-h1
	@if test ! -f $@; then \
	  rm -f stamp-h1; \
	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
	else :; fi

stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: # $(am__configure_deps) 
	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
	rm -f stamp-h1
	touch $@

distclean-hdr:
	-rm -f config.h stamp-h1
libitm.spec: $(top_builddir)/config.status $(srcdir)/libitm.spec.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
install-toolexeclibLTLIBRARIES: $(toolexeclib_LTLIBRARIES)
	@$(NORMAL_INSTALL)
	test -z "$(toolexeclibdir)" || $(MKDIR_P) "$(DESTDIR)$(toolexeclibdir)"
	@list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \
	list2=; for p in $$list; do \
	  if test -f $$p; then \
	    list2="$$list2 $$p"; \
	  else :; fi; \
	done; \
	test -z "$$list2" || { \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(toolexeclibdir)'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(toolexeclibdir)"; \
	}

uninstall-toolexeclibLTLIBRARIES:
	@$(NORMAL_UNINSTALL)
	@list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(toolexeclibdir)/$$f'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(toolexeclibdir)/$$f"; \
	done

clean-toolexeclibLTLIBRARIES:
	-test -z "$(toolexeclib_LTLIBRARIES)" || rm -f $(toolexeclib_LTLIBRARIES)
	@list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \
	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
	  test "$$dir" != "$$p" || dir=.; \
	  echo "rm -f \"$${dir}/so_locations\""; \
	  rm -f "$${dir}/so_locations"; \
	done
libitm.la: $(libitm_la_OBJECTS) $(libitm_la_DEPENDENCIES) 
	$(libitm_la_LINK) -rpath $(toolexeclibdir) $(libitm_la_OBJECTS) $(libitm_la_LIBADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

include ./$(DEPDIR)/aatree.Plo
include ./$(DEPDIR)/alloc.Plo
include ./$(DEPDIR)/alloc_c.Plo
include ./$(DEPDIR)/alloc_cpp.Plo
include ./$(DEPDIR)/barrier.Plo
include ./$(DEPDIR)/beginend.Plo
include ./$(DEPDIR)/clone.Plo
include ./$(DEPDIR)/eh_cpp.Plo
include ./$(DEPDIR)/futex.Plo
include ./$(DEPDIR)/hwcap.Plo
include ./$(DEPDIR)/local.Plo
include ./$(DEPDIR)/method-gl.Plo
include ./$(DEPDIR)/method-ml.Plo
include ./$(DEPDIR)/method-serial.Plo
include ./$(DEPDIR)/query.Plo
include ./$(DEPDIR)/retry.Plo
include ./$(DEPDIR)/rwlock.Plo
include ./$(DEPDIR)/sjlj.Plo
include ./$(DEPDIR)/tls.Plo
include ./$(DEPDIR)/useraction.Plo
include ./$(DEPDIR)/util.Plo
include ./$(DEPDIR)/x86_avx.Plo
include ./$(DEPDIR)/x86_sse.Plo

.S.o:
	$(CPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) \
#	$(CPPASCOMPILE) -c -o $@ $<

.S.obj:
	$(CPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) \
#	$(CPPASCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.S.lo:
	$(LTCPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
#	source='$<' object='$@' libtool=yes \
#	DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) \
#	$(LTCPPASCOMPILE) -c -o $@ $<

.cc.o:
	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) \
#	$(CXXCOMPILE) -c -o $@ $<

.cc.obj:
	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) \
#	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.cc.lo:
	$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
#	source='$<' object='$@' libtool=yes \
#	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) \
#	$(LTCXXCOMPILE) -c -o $@ $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool config.lt

# GNU Make needs to see an explicit $(MAKE) variable in the command it
# runs to enable its job server during parallel builds.  Hence the
# comments below.
all-multi:
	$(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE)
install-multi:
	$(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE)

mostlyclean-multi:
	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE)
clean-multi:
	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE)
distclean-multi:
	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE)
maintainer-clean-multi:
	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE)

libitm.dvi: libitm.texi  
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) -o $@ `test -f 'libitm.texi' || echo '$(srcdir)/'`libitm.texi

libitm.pdf: libitm.texi  
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2PDF) -o $@ `test -f 'libitm.texi' || echo '$(srcdir)/'`libitm.texi

libitm.html: libitm.texi  
	rm -rf $(@:.html=.htp)
	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $(@:.html=.htp) `test -f 'libitm.texi' || echo '$(srcdir)/'`libitm.texi; \
	then \
	  rm -rf $@; \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
	else \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
	  exit 1; \
	fi
.dvi.ps:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	$(DVIPS) -o $@ $<

uninstall-dvi-am:
	@$(NORMAL_UNINSTALL)
	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
	  rm -f "$(DESTDIR)$(dvidir)/$$f"; \
	done

uninstall-html-am:
	@$(NORMAL_UNINSTALL)
	@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
	  rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
	done

uninstall-info-am:
	@$(PRE_UNINSTALL)
	@if test -d '$(DESTDIR)$(infodir)' && \
	    (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
	    if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
	    then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
	  (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
	   else :; fi); \
	done

uninstall-pdf-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
	done

uninstall-ps-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PSS)'; test -n "$(psdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(psdir)/$$f"; \
	done

dist-info: $(INFO_DEPS)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  case $$base in \
	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
	    if test -f $$file; then \
	      relfile=`expr "$$file" : "$$d/\(.*\)"`; \
	      test -f "$(distdir)/$$relfile" || \
		cp -p $$file "$(distdir)/$$relfile"; \
	    else :; fi; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -rf libitm.aux libitm.cp libitm.cps libitm.fn libitm.fns libitm.ky \
	  libitm.kys libitm.log libitm.pg libitm.pgs libitm.tmp \
	  libitm.toc libitm.tp libitm.tps libitm.vr libitm.vrs

clean-aminfo:
	-test -z "libitm.dvi libitm.pdf libitm.ps libitm.html" \
	|| rm -rf libitm.dvi libitm.pdf libitm.ps libitm.html

maintainer-clean-aminfo:
	@list='$(INFO_DEPS)'; for i in $$list; do \
	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
	done
install-nodist_toolexeclibHEADERS: $(nodist_toolexeclib_HEADERS)
	@$(NORMAL_INSTALL)
	test -z "$(toolexeclibdir)" || $(MKDIR_P) "$(DESTDIR)$(toolexeclibdir)"
	@list='$(nodist_toolexeclib_HEADERS)'; test -n "$(toolexeclibdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(toolexeclibdir)'"; \
	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(toolexeclibdir)" || exit $$?; \
	done

uninstall-nodist_toolexeclibHEADERS:
	@$(NORMAL_UNINSTALL)
	@list='$(nodist_toolexeclib_HEADERS)'; test -n "$(toolexeclibdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(toolexeclibdir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(toolexeclibdir)" && rm -f $$files

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
check-am: all-am
check: check-recursive
all-am: Makefile $(INFO_DEPS) $(LTLIBRARIES) all-multi $(HEADERS) \
		config.h all-local
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(toolexeclibdir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(toolexeclibdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-multi clean-recursive

clean-am: clean-aminfo clean-generic clean-libtool \
	clean-toolexeclibLTLIBRARIES mostlyclean-am

distclean: distclean-multi distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-hdr distclean-libtool distclean-tags

dvi: dvi-recursive

dvi-am: $(DVIS)

html: html-recursive

html-am: $(HTMLS)

info: info-recursive

info-am: $(INFO_DEPS)

install-data-am: install-info-am

install-dvi: install-dvi-recursive

install-dvi-am: $(DVIS)
	@$(NORMAL_INSTALL)
	test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
	done
install-exec-am: install-multi install-nodist_toolexeclibHEADERS \
	install-toolexeclibLTLIBRARIES

install-html: install-html-recursive

install-html-am: $(HTMLS)
	@$(NORMAL_INSTALL)
	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  $(am__strip_dir) \
	  if test -d "$$d$$p"; then \
	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
	  else \
	    list2="$$list2 $$d$$p"; \
	  fi; \
	done; \
	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
	done; }
install-info: install-info-recursive

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
	for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
	               $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
	    if test -f $$ifile; then \
	      echo "$$ifile"; \
	    else : ; fi; \
	  done; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
	@$(POST_INSTALL)
	@if (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
	  done; \
	else : ; fi
install-man:

install-pdf: install-pdf-recursive

install-pdf-am: $(PDFS)
	@$(NORMAL_INSTALL)
	test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-recursive

install-ps-am: $(PSS)
	@$(NORMAL_INSTALL)
	test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
	@list='$(PSS)'; test -n "$(psdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am:

maintainer-clean: maintainer-clean-multi maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
	maintainer-clean-generic

mostlyclean: mostlyclean-multi mostlyclean-recursive

mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am: $(PDFS)

ps: ps-recursive

ps-am: $(PSS)

uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
	uninstall-nodist_toolexeclibHEADERS uninstall-pdf-am \
	uninstall-ps-am uninstall-toolexeclibLTLIBRARIES

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all all-multi \
	clean-multi ctags-recursive distclean-multi install-am \
	install-multi install-strip maintainer-clean-multi \
	mostlyclean-multi tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am all-local all-multi am--refresh check check-am \
	clean clean-aminfo clean-generic clean-libtool clean-multi \
	clean-toolexeclibLTLIBRARIES ctags ctags-recursive dist-info \
	distclean distclean-compile distclean-generic distclean-hdr \
	distclean-libtool distclean-multi distclean-tags dvi dvi-am \
	html html-am info info-am install install-am install-data \
	install-data-am install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-multi \
	install-nodist_toolexeclibHEADERS install-pdf install-pdf-am \
	install-ps install-ps-am install-strip \
	install-toolexeclibLTLIBRARIES installcheck installcheck-am \
	installdirs installdirs-am maintainer-clean \
	maintainer-clean-aminfo maintainer-clean-generic \
	maintainer-clean-multi mostlyclean mostlyclean-aminfo \
	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
	mostlyclean-multi pdf pdf-am ps ps-am tags tags-recursive \
	uninstall uninstall-am uninstall-dvi-am uninstall-html-am \
	uninstall-info-am uninstall-nodist_toolexeclibHEADERS \
	uninstall-pdf-am uninstall-ps-am \
	uninstall-toolexeclibLTLIBRARIES


vpath % $(strip $(search_path))
#libitm.map-sun : $(top_srcdir)/libitm.map \
#		$(top_srcdir)/../contrib/make_sunver.pl \
#		$(libitm_la_OBJECTS) $(libitm_la_LIBADD)
#	perl $(top_srcdir)/../contrib/make_sunver.pl \
#	  $(top_srcdir)/libitm.map \
#	  $(libitm_la_OBJECTS:%.lo=.libs/%.o) \
#	 `echo $(libitm_la_LIBADD) | \
#	    sed 's,/\([^/.]*\)\.la,/.libs/\1.a,g'` \
#	 > $@ || (rm -f $@ ; exit 1)
# Make sure -msse is appended at the end.
x86_sse.lo : override CXXFLAGS += -msse
# Make sure -mavx is appended at the end.
x86_avx.lo : override CXXFLAGS += -mavx

all-local: $(STAMP_GENINSRC)

stamp-geninsrc: libitm.info
	cp -p $(top_builddir)/libitm.info $(srcdir)/libitm.info
	@touch $@

libitm.info: $(STAMP_BUILD_INFO)

stamp-build-info: libitm.texi
	$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) -o libitm.info $(srcdir)/libitm.texi
	@touch $@

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: