#!/bin/sh
###############################################################################
# Written by Chris Dunlap <cdunlap@llnl.gov>.
# Copyright (C) 2007-2017 Lawrence Livermore National Security, LLC.
# Copyright (C) 2002-2007 The Regents of the University of California.
# UCRL-CODE-155910.
###############################################################################
# chkconfig:          - 66 33
# description:        MUNGE Uid 'N' Gid Emporium authentication service
###############################################################################
### BEGIN INIT INFO
# Provides:           munge
# Required-Start:     $local_fs $remote_fs $network $time
# Required-Stop:      $local_fs $remote_fs
# Should-Start:       $named $syslog
# Should-Stop:        $named $syslog
# Default-Start:
# Default-Stop:
# Short-Description:  MUNGE Uid 'N' Gid Emporium authentication service
# Description:        MUNGE (MUNGE Uid 'N' Gid Emporium) is a highly scalable
#                     authentication service for creating and validating
#                     credentials.
### END INIT INFO
###############################################################################

unset SERVICE_NAME DAEMON_EXEC DAEMON_ARGS CONFIG PIDFILE NICE USER GROUP \
  SIGHUP_RELOAD VARRUNDIR

prefix="/cvmfs/dirac.egi.eu/dirac/v8.0.43/Linux-x86_64"
exec_prefix="/cvmfs/dirac.egi.eu/dirac/v8.0.43/Linux-x86_64"
sbindir="/cvmfs/dirac.egi.eu/dirac/v8.0.43/Linux-x86_64/sbin"
sysconfdir="/cvmfs/dirac.egi.eu/dirac/v8.0.43/Linux-x86_64/etc"
localstatedir="/cvmfs/dirac.egi.eu/dirac/v8.0.43/Linux-x86_64/var"

SERVICE_NAME="MUNGE"
DAEMON_EXEC="$sbindir/munged"
#DAEMON_ARGS=
#CONFIG=#_NOT_SUPPORTED_#
PIDFILE="$localstatedir/run/munge/munged.pid"
#NICE=
USER="munge"
GROUP="munge"
#SIGHUP_RELOAD=#_NOT_SUPPORTED_#
VARRUNDIR="$localstatedir/run/munge"

###############################################################################

service_init ()
{
# Determine the system type and initialize the environment.
#
# Note that the shell positional parameters must be preserved when calling
#   this function in order for SuSE to initialize its environment properly.
##
  PATH=/sbin:/usr/sbin:/bin:/usr/bin
  INIT_NAME="`basename \"$0\" .init | sed 's/^[SK][0-9][0-9]*//'`"
  DAEMON_NAME="`basename \"$DAEMON_EXEC\"`"
  SIGTERM_TIMEOUT="3"
  STATUS=0

  # Read configuration defaults to override variables:
  #   $CONFIG, $DAEMON_ARGS, $PIDFILE, $USER, $NICE, $SIGHUP_RELOAD
  ##
  for dir in "$sysconfdir/default" "$sysconfdir/sysconfig"; do
    [ -r "$dir/$INIT_NAME" ] && . "$dir/$INIT_NAME"
  done
  [ -z "$DAEMON_ARGS" -a -n "$OPTIONS" ] && DAEMON_ARGS="$OPTIONS"
  [ "`id | sed 's/^uid=\([0-9]*\).*/\1/'`" -ne 0 ] && unset USER
  expr -- "$NICE" : '[0-9]*$' >/dev/null 2>&1 && NICE="+$NICE"
  [ -n "$SIGHUP_RELOAD" -a "$SIGHUP_RELOAD" != 0 ] \
    && RELOAD=1 || unset RELOAD

  if [ -f /etc/debian_version -a -x /sbin/start-stop-daemon ]; then
    SYSTEM="DEBIAN"
    [ -x "$DAEMON_EXEC" ] || exit 0             # pkg removed but not purged
    [ -r /etc/default/rcS ] && . /etc/default/rcS
    [ -r /lib/init/vars.sh ] && . /lib/init/vars.sh
    [ -r /lib/lsb/init-functions ] && . /lib/lsb/init-functions
  elif [ -f /etc/redhat-release -a -r /etc/rc.d/init.d/functions ]; then
    SYSTEM="REDHAT"
    . /etc/rc.d/init.d/functions
    RH_LOCK="/var/lock/subsys/$INIT_NAME"
  elif [ -f /etc/SuSE-release -a -r /etc/rc.status ]; then
    SYSTEM="SUSE"
    . /etc/rc.status
    rc_reset
  elif [ -r /lib/lsb/init-functions ]; then
    SYSTEM="LSB"
    . /lib/lsb/init-functions
  else
    SYSTEM="OTHER"
  fi

  # Exit if the package has been removed.
  ##
  [ -x "$DAEMON_EXEC" ] || exit 5               # LSB: program not installed

  # Exit if the configuration has been removed.
  ##
  [ -z "$CONFIG" -o -r "$CONFIG" ] || exit 6    # LSB: program not configured
}

service_fini ()
{
# Return the exit status.
##
  case $SYSTEM in
    SUSE)
      rc_exit
      ;;
    DEBIAN|REDHAT|LSB|*)
      exit $STATUS
      ;;
  esac
}

service_start ()
{
# Start the service.
#
# Required by LSB, where running "start" on a service already running should be
#   considered successful.
##
  log_init "Starting $SERVICE_NAME" "$DAEMON_NAME"

  if [ -n "$VARRUNDIR" -a ! -d "$VARRUNDIR" ]; then
    mkdir -m 755 -p "$VARRUNDIR"
    [ -n "$USER" ] && chown "$USER" "$VARRUNDIR"
    [ -n "$GROUP" ] && chgrp "$GROUP" "$VARRUNDIR"
  fi

  case $SYSTEM in
    DEBIAN)
      if $0 status >/dev/null 2>&1; then
        STATUS=0
      else
        ERRMSG=`start-stop-daemon --start --quiet \
          ${NICE:+"--nicelevel"} ${NICE:+"$NICE"} \
          ${USER:+"--chuid"} ${USER:+"$USER"} \
          ${PIDFILE:+"--pidfile"} ${PIDFILE:+"$PIDFILE"} \
          --exec "$DAEMON_EXEC" -- $DAEMON_ARGS 2>&1`
        STATUS=$?
      fi
      ;;
    REDHAT)
      if $0 status >/dev/null 2>&1; then
        STATUS=0
      else
        daemon ${NICE:+"$NICE"} ${USER:+"--user"} ${USER:+"$USER"} \
          "$DAEMON_EXEC" $DAEMON_ARGS
        STATUS=$?
      fi
      [ $STATUS -eq 0 ] && touch "$RH_LOCK" >/dev/null 2>&1
      ;;
    SUSE)
      ERRMSG=`startproc ${NICE:+"-n"} ${NICE:+"$NICE"} \
        ${USER:+"-u"} ${USER:+"$USER"} \
        ${PIDFILE:+"-p"} ${PIDFILE:+"$PIDFILE"} \
        "$DAEMON_EXEC" $DAEMON_ARGS 2>&1`
      rc_status -v
      STATUS=$?
      ;;
    LSB)
      if [ -n "$USER" ]; then
        ERRMSG=`su "$USER" -c "/sbin/start_daemon \
          ${NICE:+\"-n\"} ${NICE:+\"$NICE\"} \
          ${PIDFILE:+\"-p\"} ${PIDFILE:+\"$PIDFILE\"} \
          \"$DAEMON_EXEC\" $DAEMON_ARGS" 2>&1`
      else
        ERRMSG=`start_daemon ${NICE:+"-n"} ${NICE:+"$NICE"} \
          ${PIDFILE:+"-p"} ${PIDFILE:+"$PIDFILE"} \
          "$DAEMON_EXEC" $DAEMON_ARGS 2>&1`
      fi
      STATUS=$?
      ;;
    *)
      if $0 status >/dev/null 2>&1; then
        STATUS=0
      else
        [ -n "$NICE" ] && nice="nice -n $NICE"
        if [ -n "$USER" ]; then
          ERRMSG=`su "$USER" -c "$nice \"$DAEMON_EXEC\" $DAEMON_ARGS" 2>&1`
        else
          ERRMSG=`$nice "$DAEMON_EXEC" $DAEMON_ARGS 2>&1`
        fi
        STATUS=$?
      fi
      ;;
  esac
  log_fini "$STATUS" "$ERRMSG"
}

service_stop ()
{
# Stop the service.
#
# Required by LSB, where running "stop" on a service already stopped or not
#   running should be considered successful.
##
  log_init "Stopping $SERVICE_NAME" "$DAEMON_NAME"
  case $SYSTEM in
    DEBIAN)
      if ! $0 status >/dev/null 2>&1; then
        STATUS=0
      else
        start-stop-daemon --stop --quiet \
          ${PIDFILE:+"--pidfile"} ${PIDFILE:+"$PIDFILE"} \
          --name "$DAEMON_NAME" ${SIGTERM_TIMEOUT:+"--retry"} \
          ${SIGTERM_TIMEOUT:+"$SIGTERM_TIMEOUT"} >/dev/null 2>&1
        STATUS=$?
      fi
      ;;
    REDHAT)
      if ! $0 status >/dev/null 2>&1; then
        STATUS=0
      else
        killproc ${PIDFILE:+"-p"} ${PIDFILE:+"$PIDFILE"} \
          ${SIGTERM_TIMEOUT:+"-d"} ${SIGTERM_TIMEOUT:+"$SIGTERM_TIMEOUT"} \
          "$DAEMON_EXEC"
        STATUS=$?
      fi
      [ $STATUS -eq 0 ] && rm -f "$RH_LOCK" >/dev/null 2>&1
      ;;
    SUSE)
      killproc ${PIDFILE:+"-p"} ${PIDFILE:+"$PIDFILE"} \
        ${SIGTERM_TIMEOUT:+"-t"} ${SIGTERM_TIMEOUT:+"$SIGTERM_TIMEOUT"} \
        "$DAEMON_EXEC"
      rc_status -v
      ;;
    LSB)
      killproc ${PIDFILE:+"-p"} ${PIDFILE:+"$PIDFILE"} "$DAEMON_EXEC"
      STATUS=$?
      ;;
    *)
      signal_process "$DAEMON_EXEC"
      rc=$?
      [ $rc -eq 0 -o $rc -eq 2 ] && STATUS=0 || STATUS=1
      ;;
  esac
  log_fini "$STATUS"
  [ -f "$PIDFILE" ] && rm -f "$PIDFILE"
}

service_restart ()
{
# Stop and restart the service if it is already running;
#   otherwise, start the service.
#
# Required by LSB, where running "restart" on a service already stopped or not
#   running should be considered successful.
##
  if $0 status >/dev/null 2>&1; then
    $0 stop && $0 start
  else
    $0 start
  fi

  case $SYSTEM in
    SUSE)
      rc_status
      ;;
    DEBIAN|REDHAT|LSB|*)
      STATUS=$?
      ;;
  esac
}

service_try_restart ()
{
# Restart the service if it is already running.
#
# Optional for LSB, where running "try-restart" on a service already stopped or
#   not running should be considered successful.
# Also known as "condrestart" by RedHat.
##
  case $SYSTEM in
    REDHAT)
      [ -f "$RH_LOCK" ] && $0 restart || :
      STATUS=$?
      ;;
    SUSE)
      $0 status >/dev/null 2>&1 && $0 restart || rc_reset
      rc_status
      ;;
    DEBIAN|LSB|*)
      $0 status >/dev/null 2>&1 && $0 restart || :
      STATUS=$?
      ;;
  esac
}

service_reload ()
{
# Reload the configuration without stopping and restarting the service.
#
# Optional for LSB.
##
  [ -z "$RELOAD" ] && STATUS=3          # LSB: unimplemented feature

  log_init "Reloading $SERVICE_NAME" "$DAEMON_NAME"
  case $SYSTEM in
    DEBIAN)
      if [ -n "$RELOAD" ]; then
        start-stop-daemon --stop --quiet --signal HUP \
          ${PIDFILE:+"--pidfile"} ${PIDFILE:+"$PIDFILE"} \
          --name "$DAEMON_NAME" >/dev/null 2>&1
        STATUS=$?
      fi
      ;;
    REDHAT)
      if [ -n "$RELOAD" ]; then
        killproc ${PIDFILE:+"-p"} ${PIDFILE:+"$PIDFILE"} "$DAEMON_EXEC" -HUP
        STATUS=$?
      else
        echo_failure
      fi
      ;;
    SUSE)
      if [ -n "$RELOAD" ]; then
        killproc -HUP ${PIDFILE:+"-p"} ${PIDFILE:+"$PIDFILE"} "$DAEMON_EXEC"
      else
        rc_failed $STATUS
      fi
      rc_status -v
      ;;
    LSB)
      if [ -n "$RELOAD" ]; then
        killproc ${PIDFILE:+"-p"} ${PIDFILE:+"$PIDFILE"} "$DAEMON_EXEC" -HUP
        STATUS=$?
      fi
      ;;
    *)
      if [ -n "$RELOAD" ]; then
        signal_process "$DAEMON_EXEC" "HUP"
        STATUS=$?
      fi
      ;;
  esac
  log_fini "$STATUS"
}

service_force_reload ()
{
# Reload the configuration if the service supports this;
#   otherwise, restart the service if it is already running.
#
# Required by LSB, where running "force-reload" on a service already stopped or
#   not running should be considered successful.
##
  if [ -n "$RELOAD" ]; then
    $0 reload
  else
    $0 try-restart
  fi

  case $SYSTEM in
    SUSE)
      rc_status
      ;;
    DEBIAN|REDHAT|LSB|*)
      STATUS=$?
      ;;
  esac
}

service_status ()
{
# Print the current status of the service.
#
# Required by LSB.
##
  case $SYSTEM in
    REDHAT)
      status ${PIDFILE:+"-p"} ${PIDFILE:+"$PIDFILE"} "$DAEMON_EXEC"
      STATUS=$?
      ;;
    SUSE)
      printf "Checking for service $SERVICE_NAME: "
      checkproc ${PIDFILE:+"-p"} ${PIDFILE:+"$PIDFILE"} "$DAEMON_EXEC"
      rc_status -v
      ;;
    LSB)
      printf "Checking status of $SERVICE_NAME: "
      pids=`pidofproc ${PIDFILE:+"-p"} ${PIDFILE:+"$PIDFILE"} \
        "$DAEMON_EXEC" 2>/dev/null`
      STATUS=$?
      if [ $STATUS -eq 0 -a -n "$pids" ]; then
        echo "running."
      elif [ $STATUS -ne 0 -a -s "$PIDFILE" ]; then
        echo "dead."
      else
        echo "stopped."
      fi
      ;;
    DEBIAN|*)
      printf "Checking status of $SERVICE_NAME: "
      pids=`query_pids "$DAEMON_EXEC" "$PIDFILE"`
      rc=$?
      if [ $rc -eq 0 -a -n "$pids" ]; then
        echo "running."
        STATUS=0                        # LSB: program is running
      elif [ $rc -ne 0 -a -s "$PIDFILE" ]; then
        echo "dead."
        STATUS=1                        # LSB: program is dead & pidfile exists
      elif [ $rc -ne 0 ]; then
        echo "stopped."
        STATUS=3                        # LSB: program is not running
      else
        echo "unknown."
        STATUS=4                        # LSB: program status unknown
      fi
      ;;
  esac
}

query_pids ()
{
# Writes the matching PIDs to stdout.
# Returns 0 on success (ie, pids found).
##
  PROCNAME="$1"
  PIDFILE="$2"

  if type pgrep >/dev/null 2>&1; then
    pids=`pgrep -d ' ' -x "\`basename \"$PROCNAME\"\`" 2>/dev/null`
    rc=$?
  elif type pidof >/dev/null 2>&1; then
    pids=`pidof -o $$ -x "$PROCNAME" 2>/dev/null`
    rc=$?
  else
    pids=`(ps awx -o pid -o command || ps -e -f -o pid -o args) 2>/dev/null \
      | tail +2 | egrep "( |/)$PROCNAME( |$)" | grep -v egrep \
      | sed 's/ *\([0-9]*\).*/\1/' | sort -n | tr '\012' ' '`
    [ -n "$pids" ] && rc=0 || rc=1
  fi

  unset pids_running
  if [ -n "$pids" -a -r "$PIDFILE" ]; then
    read pid_line < "$PIDFILE"
    for pid in $pid_line; do
      expr -- "$pid" : '[0-9]*$' >/dev/null 2>&1 \
        && expr -- " $pids " : ".* $pid .*" >/dev/null 2>&1 \
        && pids_running="$pids_running $pid"
    done
    [ -n "$pids_running" ] && pids=$pids_running
  fi

  echo $pids
  return $rc
}

signal_process ()
{
# Returns 0 on success, 1 if kill failed, 2 if PROCNAME is not running.
##
  PROCNAME="$1"
  SIGNUM="$2"

  pids=`query_pids "$DAEMON_EXEC" "$PIDFILE"`
  [ $? -ne 0 -o -z "$pids" ] && return 2

  kill ${SIGNUM:+"-$SIGNUM"} $pids >/dev/null 2>&1
  [ $? -ne 0 ] && return 1
  [ -n "$SIGNUM" ] && return 0

  sleep 1
  pids=`query_pids "$DAEMON_EXEC" "$PIDFILE"`
  [ $? -ne 0 -o -z "$pids" ] && return 0
  [ -z "$SIGTERM_TIMEOUT" ] && return 1

  sleep "$SIGTERM_TIMEOUT"
  kill -KILL $pids >/dev/null 2>&1
  pids=`query_pids "$DAEMON_EXEC" "$PIDFILE"`
  [ $? -ne 0 -o -z "$pids" ] && return 0
  return 1
}

log_init ()
{
# Output informational message at beginning of action.
##
  MESSAGE="$1"
  PROCNAME="$2"

  case $SYSTEM in
    DEBIAN)
      if [ "$VERBOSE" != no ]; then
        if type log_daemon_msg >/dev/null 2>&1; then
          log_daemon_msg "$MESSAGE" "$PROCNAME"
        else
          printf "$MESSAGE: $PROCNAME"
        fi
      fi
      ;;
    REDHAT|SUSE|LSB|*)
      printf "$MESSAGE: $PROCNAME"
      ;;
  esac
}

log_fini ()
{
# Output informational/error message at end of action.
##
  STATUS="$1"
  ERRMSG="$2"

  case $SYSTEM in
    DEBIAN)
      if [ "$VERBOSE" != no ]; then
        if ( type log_end_msg && type log_failure_msg ) >/dev/null 2>&1; then
          log_end_msg "$STATUS"
          [ $STATUS -eq 0 -o -z "$ERRMSG" ] || log_failure_msg "$ERRMSG"
        else
          [ $STATUS -eq 0 ] && echo "." || echo " (failed)."
          [ $STATUS -eq 0 -o -z "$ERRMSG" ] || echo "$ERRMSG" >&2
        fi
      fi
      ;;
    REDHAT)
      echo
      ;;
    SUSE)
      [ $STATUS -eq 0 -o -z "$ERRMSG" ] || echo "$ERRMSG" >&2
      ;;
    LSB|*)
      [ $STATUS -eq 0 ] && echo "." || echo " (failed)."
      [ $STATUS -eq 0 -o -z "$ERRMSG" ] || echo "$ERRMSG" >&2
      ;;
  esac
}

###############################################################################

service_init "$@"

case "$1" in
  start)
    service_start
    ;;
  stop)
    service_stop
    ;;
  restart)
    service_restart
    ;;
  try-restart|condrestart)
    service_try_restart
    ;;
  reload)
    service_reload
    ;;
  force-reload)
    service_force_reload
    ;;
  status)
    service_status
    ;;
  *)
    echo "Usage: `basename \"$0\"`" \
      "(start|stop|restart|try-restart|reload|force-reload|status)" >&2
    exit 2                              # LSB: invalid or excess argument(s)
    ;;
esac

service_fini