%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% *** E R O S P R O G R A M M E F O R R E M O T E S ***
?
? =============================
? C P - 1 - K - K VS 930215 (PNC) VS 91-11-21 /A-LT
? ============================= VS 91-01-30 /UGW
?
% FILE: (CP)CP-1-K-K:ELAN
%
% BASED ON GEN-2F-R BY T.TURUNEN
% MODULATIONS: 1X350 US UNCODED PULSE
% 1X(16*21) US ALTERNATING CODE PULSE PER IPP
% FREQUENCY COMMUTATED OVER - TWO FREQUENCIES FOR UNCODED
% - FOUR FREQUENCIES FOR CODED
%
% PROGRAMMED BY GUDMUND WANNBERG
% 30 JANUARY 1991,EISCAT HQ
%
% NOTE! THE DISPLAY CONTROL INFORMATION IS CONTAINED IN THE FILE
% (CP)CP-1-K-K:GDEF, DOPPLER-CALIBRATION IS INCLUDED AS BLOCK 2
%
% REVISION HISTORY:
%
% 1992-05-22 All frequencies changed to avoid a potential plasma line
% contamination problem in the D/E PP. Old frequency table
% retained in the file for continuity of documentation/UGW
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SPARC-TRANSFER Y
WRITE-FILE (CP)CP-1-K-K:ELAN
WRITE-FILE (CP)CP-1-K:DESC
WRITE-FILE (CP)CP-1-K-K:GDEF
WRITE-FILE (CP)CP-1-J-K:TLAN
WRITE-FILE (CP)CP-1-J-K:CLAN
% ANTENNA POINTED PARALLEL TO MAGNETIC FIELD AT 278.6 KM ALTITUDE
% ACCORDING TO IGRF MODEL 1985-90 FOR NOV 1986
SET-PARAMETER R1,278.6 % DEFINE INTERSECTION ALTITUDE
&K OFFSET-PPD -418
&S OFFSET-PPD -415
CHANGE-REF-SITE TROMSO,,,,,
POINT-REF-H 182.57,77.54,R1
SET-SIG-PAT ALLX
&KSET-POLAR 94,-8 %SETTINGS FOR THE NOMINAL MIDDLE POINT OF THE
&SSET-POLAR 108,-18 %REMOTE SITE VOLUME AT 277.5 KM ALTITUDE
sync -360
LOAD-CORR CP-1-J-K:CCOD %BASED ON GEN-REMOTE; AUG.1986 VERSION
HOLD 10
LOAD-RA CP-1-J-K:TCOD
HOLD 10
TRANSFER-NOISE RAD
SET-FR 3,F7
SET-FR 4,F8
SET-FR 5,F5
SET-FR 6,F9
SET-FR 7,F6
SET-FR 8,F10
% Here follows the old frequency assignment table:
%SET-FR 3,F0
%SET-FR 4,F1
%SET-FR 5,F6
%SET-FR 6,F7
%SET-FR 7,F8
%SET-FR 8,F9
&KSET-SIG-ATT X,2 % 30/3 92 L-G V
&SSET-SIG-ATT X,1 % 10.1.90 JM
&KSET-CHAN-ATT 3,2 %BALANCE CHANNELS! LAST: 4/12 92 L-G V
&KSET-CHAN-ATT 4,1
&KSET-CHAN-ATT 5,8
&KSET-CHAN-ATT 6,5
&KSET-CHAN-ATT 7,8
&KSET-CHAN-ATT 8,6
&SSET-CHAN-ATT 3,3 % 10.1.90
&SSET-CHAN-ATT 4,2 % JM
&SSET-CHAN-ATT 5,2
&SSET-CHAN-ATT 6,2
&SSET-CHAN-ATT 7,2
&SSET-CHAN-ATT 8,2
SYNC 10
SET-FILT 3,BU,25,,
SET-FILT 4,BU,25,,
SET-FILT 5,LI,25,,
SET-FILT 6,LI,25,,
SET-FILT 7,LI,25,,
SET-FILT 8,LI,25,,
SELECT-ALTERNATING-CODE 16
% SET UP CORRELATOR APM AND APB STACKS
% THE DETAILED OPERATIONS CAN BE SEEN FROM THE FILE "CP-1-J-K:CLAN"
SET-CORR-APB 15,15 % ALTLAGMAX, MAX. LAG INDEX IN A/C GATES
SET-CORR-APB 14, 7 % NACSG, NO. OF A/C CHANNEL SIGNAL GATES
SET-CORR-APB 13, 3 % NACBG, NO. OF A/C CHANNEL BACKGROUND+CAL. GATES
SET-CORR-APB 12,80 % ACCALPROD, THE NUMBER OF PRODUCTS/LAG IN ACACF B,C
SET-CORR-APB 11,160 % LPCALPROD, THE NUMBER OF PRODUCTS/LAG IN LPACF B,C
SET-CORR-APB 10,3 % NLPCG, NO. OF LPACF BACKGROUND+CALIBRATION GATES
SET-CORR-APB 9, 5 % NLPSG, NO. OF LPACF SIGNAL GATES
SET-CORR-APB 8,29 % LPLAGMAX, MAX. LAG INDEX IN LPACF
SET-CORR-APB 7,32 % LPSIGSAMP, NO. OF SIGNAL SAMPLES USED/ACF IN LPACF
SET-CORR-APB 6,-10 % LPMARGIN, DEFINES OVERLAP IN LPACF SIGNAL VECTOR....
SET-CORR-APB 0,1 % INCREMENT
HOLD 10
SET-CORR-APM 15, 15 % NOLAGS, THE NO. OF LAGS IN A A/C SIGNAL GATE
SET-CORR-APM 14,240 % ACSRES, A/C SIGNAL ACF GATES
SET-CORR-APM 13,345 % ACBRES, A/C BACKGROUND GATES
SET-CORR-APM 12,377 % ACCRES, A/C CALIBRATION GATES
SET-CORR-APM 11, 29 % LPMAXLAG, THE MAX. LAG INDEX OF THE LP ACFS
SET-CORR-APM 10, 0 % LPSRES, LPACF SIGNAL GATES
SET-CORR-APM 9,150 % LPBRES, LPACF BACKGR GATES
SET-CORR-APM 8,210 % LPCRES, LPACF CALIBR GATES
SET-CORR-APM 7,393 % SCANCOUNTADDRESS
SET-CORR-APM 0,1 % INCREMENT
SET-CORR-DATAIO 394 % (5+1+1+1)*30+7*15+(2+1)*16+1
SYNC 10
SET-BUF-MEM 3, 0,3 % SET UP BUFFER MAP #3
SET-BUF-MEM 4, 687,3
SET-BUF-MEM 5,1254,3
SET-BUF-MEM 6,1276,3
SET-BUF-MEM 7,2000,3
SET-BUF-MEM 8,2000,3
SET-BUF-MEM 3, 687,2 % SET UP BUFFER MAP #2
SET-BUF-MEM 4, 0,2
SET-BUF-MEM 5,1276,2
SET-BUF-MEM 6,1254,2
SET-BUF-MEM 7,2000,2
SET-BUF-MEM 8,2000,2
SET-BUF-MEM 3, 0,1 % SET UP BUFFER MAP #1
SET-BUF-MEM 4, 687,1
SET-BUF-MEM 5,2000,1
SET-BUF-MEM 6,2000,1
SET-BUF-MEM 7,1254,1
SET-BUF-MEM 8,1276,1
HOLD 10
SET-BUF-MEM 3, 687,0 % SET UP BUFFER MAP #0
SET-BUF-MEM 4, 0,0
SET-BUF-MEM 5,2000,0
SET-BUF-MEM 6,2000,0
SET-BUF-MEM 7,1276,0
SET-BUF-MEM 8,1254,0 % LAST B.M. ADDRESS USED IS 1563
SET-ADC-INT 3,10. % 10 US SAMPLES
SET-ADC-INT 4,10.
SET-ADC-INT 5,21. % 21 US SAMPLING INCREMENT ON CODED CHANNELS
SET-ADC-INT 6,21.
SET-ADC-INT 7,21.
SET-ADC-INT 8,21.
START-CORR
SYNC 10
START-R-C 10,1,5
SYNC 10
ENABLE-DMA U,U
?
? -------------------------------------------------------------------
? TX MIGHT BE ON, CHECK DATA QUALITY. RECORDING STARTS IN 5 MINUTES.
?
? TO START THE DISPLAY PROGRAM GIVE THE COMMAND '@RTG' FROM GRAPHICS
? TERMINAL. FOR DOPPLER CALIBRATION GIVE 'GOTO-BLOCK 2' COMMAND
? -------------------------------------------------------------------
?
SYNC 280
BLOCK 1
DOPPLER-CALIBRATION OFF
START-PROGRAM INTCP,,, % START INTEGRATION PROGRAM FOR GEN-REMOTE
START-PROGRAM VELOCTY,Y,,, % START REAL TIME VECTOR-VELOCITY PROGRAM
SET-PARAMETER I20,1 % AS A MARKER OF THE REMOTE ANTENNA POSITION NO.
DO -1
NEW-FILE
DO 6
SET-PARAMETER I20,1 %TO FORCE 150-SEC INTEGRATIONS IN VELOCTY
SYNC 150
SET-PARAMETER I20,5
SYNC 150
ENDDO
ENDDO
BLOCK 2
STOP-RECORDING,,,
STOP-PROGRAM INTCP
STOP-PROGRAM VELOCTY
?
? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<
? THE DOPPLER-CALIBRATION WILL START IN 1 MIN, PLEASE MONITOR
? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<
?
WRITE-FILE (CP-EI)CP-DOPPLER:DESC
&K SET-SIGNAL-ATTENUATOR X,10
&S SET-SIGNAL-ATTENUATOR X,5 %changed from 25 dB 21.9.88 Jm
SET-FR 3,D
SET-FR 4,D
DOPPLER-CALIBRATION ON
SYNC 60
START-RECORDING
DO 2
? >>> DOPPLER CALIBRATION ON <<<
? TO STOP THE PROGRAM USE "STOP-EXPERIMENT" COMMAND OR WAIT 10 MINUTES
? TO CONTINUE WITH CP-1 USE "GOTO-BLOCK 3"
?
SYNC 300
ENDDO
DOPPLER-CALIBRATION OFF
STOP-EXPERIMENT,,,,
% STANDARD STOP OF EXPERIMENT AFTER DOPPLER-CALIBRATION
BLOCK 3
STOP-RECORDING,,,
DUMP-LOGG-FILE
SET-LO2 3,146.0 % F0
SET-LO2 4,147.0 % F2
&KSET-SIG-ATT X,4 % GaAs-FET AMPLIFIER SET-UP 2/5 89 CH 11/1 -90 KK
&SSET-SIG-ATT X,1 % 10.1.90 JM
DOPPLER-CALIBRATION OFF
? >>> DOPPLER CALIBRATION OFF, PREPARING FOR CP-1 SETTINGS <<
? TO START CP-1 RECORDING USE "GOTO-BLOCK 1
,,"
?
% WAIT HERE FOR EITHER STOP-EXPERIMENT OR GOTO-BLOCK 2 (OR 1)
DO -1
? >>> YOU ARE IN BLOCK 3 <<<
? >> GOTO-BLOCK 1 TO CONTINUE EXPERIMENT OR STOP-EXPERIMENT <<
SYNC 600
ENDDO
%
STOP-EXPERIMENT,,
E-O-E