ChangeLog for attcalc =============================== Open SPRs: - none Version 4.34 - 2015-08-25 (RDS) --------------------------------- + (src/attcalc_mod.f90): Changed the use of the psi euler angle such that it subtracts rather than adds. This is only valid if the BORESIGHT CCF contains PSI with a changed sign (SCR-7265) Version 4.33 - 2012-11-14 (RDS) --------------------------------- + (src/attcalc_mod.f90): Added keyword, calctlmax, which if set true causes the code to calculate TLMIN and TLMAX independently for X and Y from the actual X,Y event positions. (SPR-6769) Version 4.32.2 - 2012-05-07 (RDS) --------------------------------- + (src/attcalc_mod.f90): Only copy RA_PNT keywords from primary into events header if they exist. (SPR-6648) Version 4.32.1 - 2012-05-04 (RDS) --------------------------------- + (src/attcalc_mod.f90): Copy REF keywords from pimary into events header. (SPR-6648) Version 4.32 - 2003-07-14 (RDS) ------------------------------ + fixed a trivial oversight in 4.31 where memory was being freed without being allocated. Version 4.31 - 2003-07-11 (UL) ------------------------------ + experimental change :-) attempt to fix a supposed problem about the position of the optical axes; the code used to calculate the position in DETX/DETY space (CAMCOORD2 in units of 1/20th arcsec) wrongly; what was really computed was the position of the *nominal* optical axes in the frame centered on the position of the *real* optical axes; impact of this change is expected to be minimal because up to and including XMM_MISCDATA_0019 the real axis position (attibutes OPTICS_X/Y in CHIPCOORD) concided with the nominal ones; for more info search for 'cendetx' in code Version 4.30 - 2003-05-07 (HB) ------------------------------- + (config/attcalc.par): modified to enable param-2.0 functionality Version 4.29 - 2002-07-15 (MJF) ------------------------------- + (DEPEND): added "sas" as required by new infrastructure (sas-1.302) Version 4.28 - 2002-05-15 (MJF) ------------------------------- + (config/attcalc.par): updated for `param-2.0' + (DEPEND): needs `param-2.0', updated all other entries to latest Version 4.27.1 - 2002-04-08 (MJF) --------------------------------- + (src/attcalc_mod.f90): converted debug output introduced in 4.27 to a "Noisy" message [SSC-SPR-2824] closed SPR: - SSC-SPR-2824: debug output should be message Version 4.27 - 2002-03-14 (UL) ------------ + now takes position of optical axes (obtained from OPTICS_X/Y in CCF) into account Version 4.26 - 2001-12-07 (MJF) ------------------------------- + resubmitted 4.25.5 for start of 5.3 RT Version 4.25.5 2001-02-20 (AMR) ------------ + (config/attcalc.par) fixedposangle range widened (SSC-SPR-2242) + (doc/attcalc_description.tex) Documentation updated (SSC-SPR-2242) Version 4.25.4 2000-11-23 (AMR) ------------ + (doc/attcalc_description.tex) Documentation updated (SSC-SPR-2109) Version 4.25.3 2000-11-09 (AMR) ------------ + (src/attcalc_mod.f90) Release atthkgen file correctly (SSC-SPR-2035) + (config/attcalc.lyt) improved GUI layout (frames) Version 4.25.2 2000-10-18 (AMR) ------------ + (config/attcalc.par) attitudelabel (default=ahf) and refpointlabel (default=pnt) changed to optional parameters (SSC-SPR-1990). + (doc/attcalc_description.tex) Parameter changes described Version 4.25.1 2000-10-18 (AMR) ------------ + (src/attcalc_mod.f90) Copies of WCS attributes added to output primary header (SSC-SPR-1988) + (doc/attcalc_description.tex) New WCS attribute copies described Version 4.25 2000-09-29 (AMR) ------------ + (test/) FILTER=`NONE" changed to FILTER=`UNKNOWN' in test harness files Version 4.24 2000-09-13 (AMR) ------------ + (src/attcalc_mod.f90) TLMIN, TLMAX changed back to pre-v4.22.1 + (src/attcalc_mod.f90) TDMIN, TDMAX (min and max X/Y data values) attributes added Version 4.23 2000-08-29 (AMR) ------------ + (DEPEND) emsaplib 1.6 -> 2.0 Version 4.22.2 2000-07-03 (AMR) ------------ + (doc/attcalc_description.tex) errors/warnings updated (SSC-SPR-1908) Version 4.22.1 2000-06-12 (AMR) ------------ + (src/attcalc_mod.f90) TLMIN, TLMAX keywords changed (SSC-SPR-1734) + (config/Makefile) added .lyt file to CONFIGFILES (SSC-SPR-1737) + (config/attcalc.par) default values added to angle parameters (SSC-SPR-1736) + (doc/attcalc_description.tex) documentation updated (SSC-SPR-1724) + (Changelog) format updated Version 4.22 2000-05-26 (AMR) ------------ - info file included, documentation updated Version 4.21 2000-05-04 (AMR) ------------ - New boolean parameter `withatthkgen' (default Yes), determines whether the task assumes that an atthkgen output file is present - Documentation, config files updated Version 4.20 2000-05-03 (AMR) ------------ - No error when atthkgen output does not exist - warning message is given, PNT keywords not propogated, and if refpointlabel=pnt is used, NOM values are used for reference point. - Reference point keywords RAREF and DECREF (degrees) put into primary header. - Documentation updated (above plus reading/writing of keywords) Version 4.19 2000-03-29 (AMR) ------------ - SSC-SPR-1605 closed (documentation, Changelog) - Documentation updated, new Changelog format adopted Version 4.18 - 29-02-00 ------------ - Attcalc test Odfs updated, solving failure at ESTEC Version 4.17 - 28-02-00 ------------ - History and documentation updated. - Test harness updated to try and solve failure at ESTEC - Imagesize warning (different from default) changed to message. Version 4.16 - 14-02-00 ------------ - Test harness altered to handle introduction of non-zero boresight into CCF - Parameter imagesize now has slightly larger default size (0.36 degrees) Version 4.15 - 03-12-99 ----------- - Task works normaly in timing and burst mode - Test harness updated - Documentation numbering changed Version 4.14 - 19-11-99 ----------- - Test harness changed - handles new SAS_ODF and SAS_CCF - DISTRIBUTION file and newline in ./Makefile included - DEPENDS on new emsaplib Version 4.13 - 15-11-99 ----------- - New CAL (3.32) and testccf (1.51) used, incorporating changed boresight handling (CAL_getBoresightMatrix) and camera-to-spacecraft co-ord handling (CAL_getCamCoord2ToSacCoord). Version 4.12 - 05-10-99 ----------- - Three SPRs closed (use of errors, warnings and messages) - Test harness updated Closed SPRs: SSC-SPR-1269, 1273, 1274 Version 4.11 - 24-09-99 ----------- - Task handles completely bad quality atthkgen files correctly. - Test harness updated. Handles exit status checking of each subtest programs. Closed SPRs: SSC-SPR-1207 Version 4.10 - 17-09-99 ----------- - NULL settings are now used for X and Y values, in cases of bad attitude data. The X/Y TNULL values are -99999999, and `INDEF' appears in the X/Y columns - Documentation updated to attcalc v4.10. New latex macros used. - Test harness updated to include testing of bad attitude/NULL functions. - Layout file corrected (atthkset file must exist). Closes SPR. - ChangeCase function accessed via emutils library. Closes SPR. Closed SPRs : SSC-SPR-0317, 1244 SPRs to be closed, pending outside tests : 1207 Version 4.9 - 01-09-99 ----------- - Test harness updated. Newly created files used. `Drifting' AHF accessed. Individual detector boresight and orientations tested. - Documentation updated, partly as regards use of atthkgen output file - Several SPRs closed Closed SPRs : SSC-SPR-1200, 1202, 1204, 1206, 1230 SPRs to be closed, pending outside tests : 1207 Version 4.8 - 20-08-99 ----------- - As v4.7, with one character in the code changed! Version 4.7 - 19-08-99 ----------- - As v4.6, with errors regarding PNT keywords and lo-number event lists corrected for. - As regards propogating the PNT keywords, atthkgen must be run before attcalc, whatever mode of attcalc is used. Version 4.6 - 19-08-99 ----------- - As v4.5, but with slight change in usage of OAL_getAttitude - Depends on cal-3.16 and oal-3.28 Version 4.5 - 18-08-99 ----------- - Two new (optional) parameters to use when refpointlabel=pnt. Here either (set via "withmedianpnt") the median (default) or mean attitude pointing can be used as the reference point of the sky co-ordinates. This information is here retrieved from the output of the task atthkgen (which will need to have been run previously) via the parameter "atthkset" (default: atthk.dat). - Because of above, chains that attempt to run attcalc with refpointlabel=pnt, will need to have run atthkgen first. - Attcalc should be able to correctly handle the CAMCOORD2-to-Spacecraft boresight matrices expected soon (cal-3.16). - Usage of OAL_getAttitude changed to reflect expected changes in oal (v3.28) - Documentation and test harness updated. - NB `Blind' delivery (DEPEND on oal-3.28) - Closed SPRs: SSC-SPR-1183, 1185, 1186, 1187 Version 4.4 - 12-08-99 ----------- - Use with `drifting' attitude tested. Included in test harness. - Small error found when using varying attitude corrected for. - Should be complient with new camera orientation information provided by CAL/OAL (testccf-1.30). Version 4.3 - 06-08-99 ----------- - SPRs SSC-SPR-1127 and 1145 dealt with (also 1157 closed) - TCUNI WCS attributes now introduced - No attempts at checking with varying odf `scisimwobble', as this does not yet exist Version 4.2 - 11-06-99 ----------- - In line with CAL v3.0 - No attempts at checking with varying odf `scisimwobble', as this does not yet exist Version 4.1 - 28-05-99 ----------- - Bug in transformation fixed - closes SPRs Closed SPRs: SSC-SPR-0993,994 Version 4.0 - 21-04-99 ----------- - All parameters now have new names (documentation changed accordingly) - Parameter `imagesize' (old imsize) now has default of 0.34 deg (20.4 arcm) Closed SPRs: SSC-SPR-0962 Version 3.1 - 16-03-99 ----------- - Minor change to 3.0, allowing attcalc to work (with attsrc=ahf/om and refpoint=pnt) on files containing no RA_NOM/DEC_NOM or RA_OBJ/DEC_OBJ attributes. Version 3.0 - 10-03-99 ----------- - removed odfdir parameter (covered by taskmain functionality). Hence present chains may need to be changed - hence new main version number - boresight correctly handled via CAL_getBoresightMatrix and OAL_toEulerAngles. - removed call to `call CAL_openCCF("")' - uses new h/q mode in parameter file Version 2.4 - 22-02-99 ----------- A version submitted by Marco to solve a small problem (just %positionAngle => %apos) Version 2.3 - 04-02-99 ----------- The position angle now assumed is the *astronomical* position angle (XMM-MOC-TN-0109-OAD), and should be in line with SciSim (this closes two SPRs). The task is now GUI-compatible (an attcalc.lyt file has been created). Also, the default value of the parameter `imsize' has been reduced to a more friendly value (20 arcmin). Also the documentation has been updated. Closed SPRs: SSC-SPR-0868, 903, 908 Version 2.2 - 10-12-98 ----------- Final delivery before version 2 deadline. Almost identical to Version 2.1, apart from one mistake in the transformation, which has been rectified. Version 2.1 - 02-12-98 ----------- New version, incorporating changes suggested after V2 testing. Attsrc and refpoint parameters are now just lowercase. TCRPX and TCDLT attributes are read in from input events file. Closed SPRs: SSC-SPR-0859, 0860, 0867, 0870 Version 2.0 - 17-11-98 ----------- New delivery incorporating a new mandatory parameter (refpoint - hence the change in major version number), which points to the source of the central reference point coordinates. Choices are NOM (ra/dec taken from RA_NOM, DEC_NOM keywords), OBJ (ra/dec taken from RA_OBJ, DEC_OBJ keywords), PNT (calculated mean pointing over the observation used as ra/dec), an USER (user input ra/dec). Several SPRs closed with this delivery. Closed SPRs: SSC-SPR-0833 to SSC-SPR-0846 (14 SPRs) Version 1.8 - 03-11-98 ----------- Delivery to hopefully concur with problems with the test ODF summary file. Lines have been deleted from the test odf summary file, as suggested by Jon Brumfitt. Because of this, gmake test no longer works at MPE (or at Leicester), though it should now work at estec. Version 1.7 - 16-10-98 ----------- Further delivery to incorporate new f90 coding standards. Position angle now defined as it should be (i.e. now not consistent with (old?) scisim). Still some confusion as to certain things (attcalc, ep/emevents, CAL etc). These may change later. Closed SPRs: SSC-SPR-0560 Version 1.6 - 01-10-98 ----------- Final delivery for version 2 Task changed slightly as confusion existed (and still exists) regarding where certain corrections should be done (attcalc, ep/emevents, CAL etc). Some confusion still exists also regarding definition of position angle. Position angle is defined here to give images consistent with Scisim (this may change later). Version 1.5 - 16-09-98 ----------- Redelivery to comply with new parameter package Version 1.4 - 14-09-98 ----------- Slight corrections to Version 1.3. The task contains a dummy odf directory which the task accesses in its test. A new parameter `odfdir' is included. Closed SPRs: 0525 (including all similar occurences of similar errors) Version 1.3 - 04-09-98 ----------- Redelivery of task, such that it is now compatible with OAL v2.0. Also significant changes have occurred in the code, such that an intermediate corrected attitude file is now not produced. The task is also now able to access the AHF via OAL commands (see task description). Closed SPRs: 0038, 0044, 0313-0316, 0459 Version 1.2 - 29-05-98 ----------- Final task redelivery for SAS v1 (Version 1.2) Fixed SPRs: SSC-SPR-0287 (test harness fails) Version 1.1 - 26-05-98 ----------- Final task delivery for SAS v1 (Version 1.1) Fixed SPRs: SSC-SPR-0029 to 0033, 0035 to 0037, 0039 to 0043, 0045 Version 1.0 - 14-05-98 ----------- Initial version for SAS v1 integration