ChangeLog for epicproc ---------------------- Version 2.20 - 2015-12-09 (AI) -------------- + mos doc updated (SOC-SPR-7100) Version 2.19 - 2015-12-01 (AI) -------------- + doc updated (SOC-SPR-7264) Version 2.18 - 2014-11-17 (AI) -------------- + epproc layout file changed Version 2.17.4 - 2014-11-02 (AI) -------------- + Doc updated Version 2.17.3 - 2014-10-32 (AI) -------------- + New parameter "withdefaultcal". This paramter overrules the default parameter values for: withrdpha(epevents) withxrlcorrection(epreject) runepreject and runepfast. SOC-SCR-7253 implemented Version 2.17.2 - 2014-10-24 (AI) -------------- + propagate REJ_CORR keyword to the final event list if epreject was enabled. SOC-SPR-7247 fixed Version 2.17.1 - 2014-09-15 (AI) -------------- + Default parameter values for: "withbackgroundgain", "withpatternoffset" set to "yes" + added new parameter "ctilongtermsoft" + doc updated + SOC-SPR-7227 closed Version 2.17 - 2014-06-05 (AI) ----------- + added new parameter "withbackgroundgain" + added new parameter "withpatternoffset" + Doc updated + DEPEND file updated Version 2.16 - 2014-05-05 (AI) ----------- + Default parameter values for "runepfast" and "withrdpha" changed. + Doc updated. Version 2.15 - 2014-04-30 (AI) ----------- + eprejectti task call added to epproc. + doc updated Version 2.14.4 - 2013-11-29 (AI) ----------- + Default value for "runepfast" set to yes. + Doc updated. Version 2.14.3 - 2013-11-28 (AI) ----------- + noise reduction correction not applied in epreject if epnoise is enabled. Version 2.14.2 - 2013-11-27 (AI) ----------- + if parameter "withrdpha" is set to true and the epfast task is also enabled, epproc does not run epfast and it throws a warning messages saying that epfast will not run. Version 2.14.1 - 2013-11-26 (AI) ----------- + Keyword PHA_RDCO properly propagated to the final event list in case "epevents" task is called with the parameter "withrdpha" set to yes. + Keyword REJ_CORR properly propagated to the final event list in case "epreject" task is called with the parameter "withxrlcorrection" set to yes. Version 2.14 - 2013-10-29 (AI) ----------- + (src/Epproc.cc) new call to epfast + changed parameter "withrdcti" to "withrdpha" + Added new parameter to epevents call "rdphatimebinsize" + documentation updated Version 2.13.4 - 2013-06-03 (AI) ----------- + Remove temporal pile-up intermediate files if not requested + Keyword XRL_CORR properly propagated to the final event list in case "epxrlcorr" task is enabled Version 2.13.3 - 2013-04-04 (AI) ----------- + New parameters added + epproc timing test updated with new SAS_JUMP_TOLERANCE value + doc updated Version 2.13.2 - 2013-03-20 (AI) ----------- + New optical loading task epxrlcorr included. + New parameter pileuptempfile added. This parameters stores the output of epevents. Version 2.13.1 - 2013-03-19 (AI) ----------- + Parameter patternanalysis added to epproc proc. Version 2.13 - 2012-10-18 (RDS) ----------- + (pn/Epproc.cc) Introduction of the testenergywidth parameter which is passed to epevents (SCR-338) Version 2.12.2 - 2012-07-10 (AI) ----------- + (lib/EpicProc.cc) epnoise parameter typo fixed. Version 2.12.1 - 2012-03-29 (AI) ----------- + New parameters withxrlcorrection (epreject) and noisecut epnoise. SOC-SPR-6698 fixed + Doc updated. Version 2.12 - 2012-01-19 (AI) ----------- + (pn/Epproc.cc) Only run epnoise if the flag "runepnoise" is enabled. Version 2.11 - 2011-09-14 (AI) ----------- + (lib/Epicproc.cc) Check the instrument before calling epnoise (only EPN) Version 2.10 - 2011-09-13 (AI) ----------- + epreject dependency removed + epnoise call added Version 2.9.20 - 2009-09-03 (AI) ----------- + Fixes to make epicproc gcc-4.3 compliant. Version 2.9.19 - 2008-05-14 (AI) ----------- + randomizetime parameter added to runepexposure extension. Version 2.9.18 - 2007-11-14 (AI) ----------- + (doc/epproc.par) Default "withtempcorrection" parameter value set to YES Version 2.9.17 - 2007-10-22 (AI) ----------- + (lib/EpicProc.cc) removed unwanted debug lines. Version 2.9.16 - 2007-07-05 (AI) ----------- + New parameter "withtempcorrection" added. SOC-SPR-1721 fixed Version 2.9.15 - 2007-06-27 (AI) ----------- + New parameter "ontimepha" added to MOS pipeline to enable or disable the MOS timing correction. SOC-SPR-2718 closed. Version 2.9.14 - 2007-06-27 (AI) ----------- + (pn/Epproc.cc) epntimcoltypes vector upgraded. Close SOC-SPR-2716) Version 2.9.13 - 2006-06-23 (AI) ----------- +(lib/EpicProc.cc, config/epproc.par, config/emproc.par) New parameter "rungtimerge" added to the "Filter and Merge" section. By default set to "no". +Documentation updated. Version 2.9.12 - 2006-02-22 (AI) ----------- + "runhkgtigen" parameter default value set to "yes". Version 2.9.11 - 2005-11-29 (AI) -------------- + (doc/pn/epproc_description.tex, doc/mos/emproc_description.tex) Problem with "latex2html" fixed. Version 2.9.10 - 2005-08-03 (AI) ----------- + (Epicproc.cc) Check the instrument name in the "evlistcomb" call. Fixed SPR-SOC-2625. Version 2.9.9 - 2005-07-22 (AI) ----------- + New two parameters added to emproc: correctcti and correctgain. Both parameters belong to emenergy task. SPR-SOC-2623 fixed. Version 2.9.8 - 2005-06-13 (AI) ----------- + (Proc.cc) The signal call to trap SIGABRT doesn't work in Mac OSX 10.3. Both epproc and emproc applications hang at execution time and the processes remain consuming computer resources. We have introduced a MACOSX macro statement to fix the problem in this architecture. Version 2.9.7 - 2005-06-09 (AI) ----------- + Major upgrade of epproc and emproc done in order to add the same functionality as epchain and emchain. + Method that is not longer shared between both tasks: processExposure. + Epproc.cc: epreject task has been added to the process. New parameter "runepreject" added (set to no by default). epexposure task has been added to the process. New parameter runepexposure added (set to "yes" by default). Some of the default values for the parameters were changed. Documentation updated. + Emproc.cc: The main CCD process has been completely updated (see flow chart in the documentation). New parameter "embadpixfindalgo" added. This parameter allows the user to select "embadpixfind" task or "badpixfind" task. New methods added to handle with bad pix search using "embadpixfind" algorithm (The methods are: badpixelsSearch, findFinalBadPixels) New functionality added for GATTI flare screening. (The methods are: mergeIntermediateResults, badPixupdate, makeFlareTs, addFracExp, tsToGTI, testFlareGTI) emeventsproj, embadpixfind, ebapixupdate, tabgtigen, tasks have added to the process. New parameter "findlowener" to enable an additional run of "embadpixfind" below 500 eV (set to "yes" by default). Documentation updated. Version 2.9.6 - 2005-01-12 (AI) ----------- + Documentation updated. Version 2.9.5 - 2004-12-22 (AI) ----------- + New parameter analyzingSciSimdata added to analyze SciSim data. Version 2.9.4 - 2004-10-05 (AI) ----------- + CALINDEX check test removed from checkpn.cc, checkpn_timing.cc, checkpn_burst.cc. Version 2.9.3 - 2004-07-05 (AI) ----------- + epproc runs evlistcomb with the "maintable" parameter set to "EVENTS OFFSETS", in stead of, "EVENTS" (SOC-SPR-2538). Version 2.9.2 - 2004-06-15 (AI) ----------- + Removed perl script: checkmos, checkpn, checkpn_timing, checkpn_burst, due to the MAC errors (pedal dependency). In stead, we have created new c++ programs. Version 2.9.1 - 2004-03-15 (AI) ----------- + Documentation updated: parameters overhauled. Version 2.9 - 2003-12-10 (AI) ----------- + New library included in pn/Makefile (libeputils) for static builds. Version 2.8 - 2003-12-05 (AI) ----------- + Perl scripts checkpn, checkpn_timing, checkpn_burst updated. Version 2.7 - 2003-11-21 (AI) ----------- + DEPEND file updated. Version 2.6 - 2003-10-31 (AI) ----------- + changed USEDLIBS in Makefile (pn and mos) for static builds. Version 2.5 - 2003-10-30 (AI) ----------- + No changes. Only re-uploaded. Version 2.4 - 2003-10-29 (AI) ----------- + Perl scripts checkpn, checkpn_timing, checkpn_burst updated. Version 2.3 - 2003-10-22 (EO) ----------- + Check dependencies fails if not emenergy-8.0 and emevents-8.0 in DEPEND file. Version 2.2 - 2003-08-05 (GV) ----------- + Import a couple of changes that had been made to the RT version (1.0.6), but not yet moved to the DT namely: + (EpicProc.cc) make sure external CCDs are always processed when MOS is in timing mode. + timing modes processed by default (both PN and MOS) + documentation updated. Version 2.1 - 2003-06-26 (GV) ----------- + (Epproc.cc) PATTERN column in event list files changed from int32 to int8, SOC-SPR-2423. Version 2.0 - 2002-10-07 (GV) ----------- + (Emproc.cc) no longer make use of the parameters cosmicsize, cosmicoutoverin (emframes), e3thresholds (emevents), e3e4ellipse (emenergy) as the corresponding tasks now read them from the CCF. (SOC-SPR-2342) + (EpicProc.cc) make sure hkgtigen is invoked with the correct instrument. (SOC-SPR-2341) Version 1.2 - 2002-09-20 (GV) ----------- + Now it works with gcc-3.1. Version 1.1 - 2002-05-13 (GV) ----------- + Updated for param 2.0 Version 1.0.4 - 2002-04-02 (GV) ------------- + More documentation updates. + Compact a little parameter dialog. Version 1.0.3 - 2002-03-28 (GV) ------------- + Documentation updated. Version 1.0.2 - 2002-03-26 (GV) ------------- + Factorize out more code: badpixfind is now common between emproc and epproc. + Clean up parameter files by removing unused parameters. + (Proc.cc) make all sub-tasks execute as system calls instead of subroutines in order to work around a problem that could not be fixed for 5.3.0. + New lyt files. Version 1.0.1 - 2002-03-11 (GV) ------------- + DEPEND updated. Version 1.0 - 2002-03-10 (GV) ----------- + merge of proclib, epproc, emproc ChangeLog for emproc ChangeLog for epproc ChangeLog for proclib