# $Id$
#
#  Copyright (C) 2002-2006  greg Landrum and Rational Discovery LLC
#
#   @@ All Rights Reserved @@
#  This file is part of the RDKit.
#  The contents are covered by the terms of the BSD license
#  which is included in the file license.txt, found at the root
#  of the RDKit source tree.
#

"""Command line tool to construct an enrichment plot from saved composite models

Usage:  EnrichPlot [optional args] -d dbname -t tablename <models>

Required Arguments:
  -d "dbName": the name of the database for screening

  -t "tablename": provide the name of the table with the data to be screened

  <models>: file name(s) of pickled composite model(s).
     If the -p argument is also provided (see below), this argument is ignored.
     
Optional Arguments:
  - -a "list": the list of result codes to be considered active.  This will be
        eval'ed, so be sure that it evaluates as a list or sequence of
        integers. For example, -a "[1,2]" will consider activity values 1 and 2
        to be active

  - --enrich "list": identical to the -a argument above.      

  - --thresh: sets a threshold for the plot.  If the confidence falls below
          this value, picking will be terminated

  - -H: screen only the hold out set (works only if a version of 
        BuildComposite more recent than 1.2.2 was used).

  - -T: screen only the training set (works only if a version of 
        BuildComposite more recent than 1.2.2 was used).

  - -S: shuffle activity values before screening

  - -R: randomize activity values before screening

  - -F *filter frac*: filters the data before training to change the
     distribution of activity values in the training set.  *filter frac*
     is the fraction of the training set that should have the target value.
     **See note in BuildComposite help about data filtering**

  - -v *filter value*: filters the data before training to change the
     distribution of activity values in the training set. *filter value*
     is the target value to use in filtering.
     **See note in BuildComposite help about data filtering**

  - -p "tableName": provides the name of a db table containing the
      models to be screened.  If you use this argument, you should also
      use the -N argument (below) to specify a note value.
      
  - -N "note": provides a note to be used to pull models from a db table.

  - --plotFile "filename": writes the data to an output text file (filename.dat)
    and creates a gnuplot input file (filename.gnu) to plot it

  - --showPlot: causes the gnuplot plot constructed using --plotFile to be
    displayed in gnuplot.

"""
from __future__ import print_function
from rdkit import RDConfig
import numpy
import copy
from rdkit.six.moves import cPickle
#from rdkit.Dbase.DbConnection import DbConnect
from rdkit.ML.Data import DataUtils,SplitData,Stats
from rdkit.Dbase.DbConnection import DbConnect
from rdkit import DataStructs
from rdkit.ML import CompositeRun
import sys,os,types
from rdkit.six import cmp

__VERSION_STRING="2.4.0"
def message(msg,noRet=0,dest=sys.stderr):
  """ emits messages to _sys.stderr_
    override this in modules which import this one to redirect output

    **Arguments**

      - msg: the string to be displayed

  """
  if noRet:
    dest.write('%s '%(msg))
  else:
    dest.write('%s\n'%(msg))
def error(msg,dest=sys.stderr):
  """ emits messages to _sys.stderr_
    override this in modules which import this one to redirect output

    **Arguments**

      - msg: the string to be displayed

  """
  sys.stderr.write('ERROR: %s\n'%(msg))

def ScreenModel(mdl,descs,data,picking=[1],indices=[],errorEstimate=0):
  """ collects the results of screening an individual composite model that match
    a particular value

   **Arguments**

     - mdl: the composite model

     - descs: a list of descriptor names corresponding to the data set

     - data: the data set, a list of points to be screened.

     - picking: (Optional) a list of values that are to be collected.
       For examples, if you want an enrichment plot for picking the values
       1 and 2, you'd having picking=[1,2].

    **Returns**

      a list of 4-tuples containing:

         - the id of the point 

         - the true result (from the data set)

         - the predicted result

         - the confidence value for the prediction
       
  """
  mdl.SetInputOrder(descs)

  for j in range(len(mdl)):
    tmp = mdl.GetModel(j)
    if hasattr(tmp,'_trainIndices') and type(tmp._trainIndices)!=types.DictType:
      tis = {}
      if hasattr(tmp,'_trainIndices'):
        for v in tmp._trainIndices: tis[v]=1
      tmp._trainIndices=tis

  res = []
  if mdl.GetQuantBounds():
    needsQuant = 1
  else:
    needsQuant = 0

  if not indices: indices = range(len(data))
  nTrueActives=0
  for i in indices:
    if errorEstimate:
      use=[]
      for j in range(len(mdl)):
        tmp = mdl.GetModel(j)
        if not tmp._trainIndices.get(i,0):
          use.append(j)
    else:
      use=None
    pt = data[i]
    pred,conf = mdl.ClassifyExample(pt,onlyModels=use)
    if needsQuant:
      pt = mdl.QuantizeActivity(pt[:])
    trueRes = pt[-1]
    if trueRes in picking:
      nTrueActives+=1
    if pred in picking:
      res.append((pt[0],trueRes,pred,conf))
  return nTrueActives,res

def AccumulateCounts(predictions,thresh=0,sortIt=1):
  """  Accumulates the data for the enrichment plot for a single model

    **Arguments**

      - predictions: a list of 3-tuples (as returned by _ScreenModels_)

      - thresh: a threshold for the confidence level.  Anything below
        this threshold will not be considered

      - sortIt: toggles sorting on confidence levels


    **Returns**

      - a list of 3-tuples:

        - the id of the active picked here
        
        - num actives found so far

        - number of picks made so far

  """
  if sortIt:
    predictions.sort(lambda x,y:cmp(y[3],x[3]))
  res = []
  nCorrect = 0
  nPts = 0
  for i in range(len(predictions)):
    id,real,pred,conf = predictions[i]
    if conf > thresh:
      if pred == real:
        nCorrect += 1
      nPts += 1
      res.append((id,nCorrect,nPts))

  return res    

def MakePlot(details,final,counts,pickVects,nModels,nTrueActs=-1):
  if not hasattr(details,'plotFile') or not details.plotFile:
    return
  
  dataFileName = '%s.dat'%(details.plotFile)
  outF = open(dataFileName,'w+')
  i = 0
  while i < len(final) and counts[i] != 0:
    if nModels>1:
      mean,sd = Stats.MeanAndDev(pickVects[i])
      confInterval = Stats.GetConfidenceInterval(sd,len(pickVects[i]),level=90)
      outF.write('%d %f %f %d %f\n'%(i+1,final[i][0]/counts[i],
                                     final[i][1]/counts[i],counts[i],confInterval))
    else:
      outF.write('%d %f %f %d\n'%(i+1,final[i][0]/counts[i],
                                  final[i][1]/counts[i],counts[i]))
    i+=1
  outF.close()  
  plotFileName = '%s.gnu'%(details.plotFile)
  gnuF = open(plotFileName,'w+')
  gnuHdr="""# Generated by EnrichPlot.py version: %s
  set size square 0.7
  set xr [0:]
  set data styl points
  set ylab 'Num Correct Picks'
  set xlab 'Num Picks'
  set grid
  set nokey
  set term postscript enh color solid "Helvetica" 16
  set term X
  """%(__VERSION_STRING)
  print(gnuHdr, file=gnuF)
  if nTrueActs >0:
    print('set yr [0:%d]'%nTrueActs, file=gnuF)
  print('plot x with lines', file=gnuF)
  if nModels>1:
    everyGap = i/20
    print('replot "%s" using 1:2 with lines,'%(dataFileName),end='', file=gnuF)
    print('"%s" every %d using 1:2:5 with yerrorbars'%(dataFileName,
                                                       everyGap), file=gnuF)
  else:
    print('replot "%s" with points'%(dataFileName), file=gnuF)
  gnuF.close()

  if hasattr(details,'showPlot') and details.showPlot:
    try:
      import os
      from Gnuplot import Gnuplot
      p = Gnuplot()
      #p('cd "%s"'%(os.getcwd()))
      p('load "%s"'%(plotFileName))
      raw_input('press return to continue...\n')
    except:
      import traceback
      traceback.print_exc()



      
def Usage():
  """ displays a usage message and exits """
  sys.stderr.write(__doc__)
  sys.exit(-1)

if __name__=='__main__':
  import getopt
  try:
    args,extras = getopt.getopt(sys.argv[1:],'d:t:a:N:p:cSTHF:v:',
                                ('thresh=','plotFile=','showPlot',
                                 'pickleCol=','OOB','noSort','pickBase=',
                                 'doROC','rocThresh=','enrich='))
  except:
    import traceback
    traceback.print_exc()
    Usage()

    
  details = CompositeRun.CompositeRun()
  CompositeRun.SetDefaults(details)

  details.activeTgt=[1]
  details.doTraining = 0
  details.doHoldout = 0
  details.dbTableName = ''
  details.plotFile = ''
  details.showPlot = 0
  details.pickleCol = -1
  details.errorEstimate=0
  details.sortIt=1
  details.pickBase = ''
  details.doROC=0
  details.rocThresh=-1
  for arg,val in args:
    if arg == '-d':
      details.dbName = val
    if arg == '-t':
      details.dbTableName = val
    elif arg == '-a' or arg == '--enrich':
      details.activeTgt = eval(val)
      if(type(details.activeTgt) not in (types.TupleType,types.ListType)):
        details.activeTgt = (details.activeTgt,)
        
    elif arg == '--thresh':
      details.threshold = float(val)
    elif arg == '-N':
      details.note = val
    elif arg == '-p':
      details.persistTblName = val
    elif arg == '-S':
      details.shuffleActivities = 1
    elif arg == '-H':
      details.doTraining = 0
      details.doHoldout = 1
    elif arg == '-T':
      details.doTraining = 1
      details.doHoldout = 0
    elif arg == '-F':
      details.filterFrac=float(val)
    elif arg == '-v':
      details.filterVal=float(val)
    elif arg == '--plotFile':
      details.plotFile = val
    elif arg == '--showPlot':
      details.showPlot=1
    elif arg == '--pickleCol':
      details.pickleCol=int(val)-1
    elif arg == '--OOB':
      details.errorEstimate=1
    elif arg == '--noSort':
      details.sortIt=0
    elif arg == '--doROC':
      details.doROC=1
    elif arg == '--rocThresh':
      details.rocThresh=int(val)
    elif arg == '--pickBase':
      details.pickBase=val
      
  if not details.dbName or not details.dbTableName:
    Usage()
    print('*******Please provide both the -d and -t arguments')

  message('Building Data set\n')
  dataSet = DataUtils.DBToData(details.dbName,details.dbTableName,
                               user=RDConfig.defaultDBUser,
                               password=RDConfig.defaultDBPassword,
                               pickleCol=details.pickleCol,
                               pickleClass=DataStructs.ExplicitBitVect)

  descs = dataSet.GetVarNames()
  nPts = dataSet.GetNPts()
  message('npts: %d\n'%(nPts))
  final = numpy.zeros((nPts,2),numpy.float)
  counts = numpy.zeros(nPts,numpy.integer)
  selPts = [None]*nPts

  models = []
  if details.persistTblName:
    conn = DbConnect(details.dbName,details.persistTblName)
    message('-> Retrieving models from database')
    curs = conn.GetCursor()
    curs.execute("select model from %s where note='%s'"%(details.persistTblName,details.note))
    message('-> Reconstructing models')
    try:
      blob = curs.fetchone()
    except:
      blob = None
    while blob:
      message(' Building model %d'%len(models))
      blob = blob[0]
      try:
        models.append(cPickle.loads(str(blob)))
      except:
        import traceback
        traceback.print_exc()
        print('Model failed')
      else:
        message('  <-Done')
      try:
        blob = curs.fetchone()
      except:
        blob = None
    curs = None    
  else:
    for modelName in extras:
      try:
        model = cPickle.load(open(modelName,'rb'))
      except:
        import traceback
        print('problems with model %s:'%modelName)
        traceback.print_exc()
      else:
        models.append(model)
  nModels = len(models)
  pickVects = {}
  halfwayPts = [1e8]*len(models)
  for whichModel,model in enumerate(models):
    tmpD = dataSet
    try:
      seed = model._randomSeed
    except AttributeError:
      pass
    else:
      DataUtils.InitRandomNumbers(seed)
    if details.shuffleActivities:
      DataUtils.RandomizeActivities(tmpD,
                                    shuffle=1)
    if hasattr(model,'_splitFrac') and (details.doHoldout or details.doTraining):
      trainIdx,testIdx = SplitData.SplitIndices(tmpD.GetNPts(),model._splitFrac,
                                                silent=1)
      if details.filterFrac != 0.0:
        trainFilt,temp = DataUtils.FilterData(tmpD,details.filterVal,
                                              details.filterFrac,-1,
                                              indicesToUse=trainIdx,
                                              indicesOnly=1)
        testIdx += temp
        trainIdx = trainFilt
      if details.doTraining:
        testIdx,trainIdx = trainIdx,testIdx
    else:
      testIdx = range(tmpD.GetNPts())
      
    message('screening %d examples'%(len(testIdx)))
    nTrueActives,screenRes = ScreenModel(model,descs,tmpD,picking=details.activeTgt,
                                         indices=testIdx,
                                         errorEstimate=details.errorEstimate)
    message('accumulating')
    runningCounts = AccumulateCounts(screenRes,
                                     sortIt=details.sortIt,
                                     thresh=details.threshold)
    if details.pickBase:
      pickFile = open('%s.%d.picks'%(details.pickBase,whichModel+1),'w+')
    else:
      pickFile = None


    for i,entry in enumerate(runningCounts):
      entry = runningCounts[i]
      selPts[i] = entry[0]
      final[i][0] += entry[1]
      final[i][1] += entry[2]
      v = pickVects.get(i,[])
      v.append(entry[1])
      pickVects[i] = v
      counts[i] += 1
      if pickFile:
        pickFile.write('%s\n'%(entry[0]))
      if entry[1] >= nTrueActives/2 and entry[2]<halfwayPts[whichModel]:
        halfwayPts[whichModel]=entry[2]
    message('Halfway point: %d\n'%halfwayPts[whichModel])

  if details.plotFile:
    MakePlot(details,final,counts,pickVects,nModels,nTrueActs=nTrueActives)
  else:
    if nModels>1:
      print('#Index\tAvg_num_correct\tConf90Pct\tAvg_num_picked\tNum_picks\tlast_selection')
    else:
      print('#Index\tAvg_num_correct\tAvg_num_picked\tNum_picks\tlast_selection')

    i = 0
    while i < nPts and counts[i] != 0:
      if nModels>1:
        mean,sd = Stats.MeanAndDev(pickVects[i])
        confInterval = Stats.GetConfidenceInterval(sd,len(pickVects[i]),level=90)
        print('%d\t%f\t%f\t%f\t%d\t%s'%(i+1,final[i][0]/counts[i],confInterval,
                                        final[i][1]/counts[i],
                                        counts[i],str(selPts[i])))
      else:
        print('%d\t%f\t%f\t%d\t%s'%(i+1,final[i][0]/counts[i],
                                    final[i][1]/counts[i],
                                    counts[i],str(selPts[i])))
      i += 1
    
  mean,sd = Stats.MeanAndDev(halfwayPts)
  print('Halfway point: %.2f(%.2f)'%(mean,sd))