This is r5rs.info, produced by makeinfo version 4.8 from r5rs.texi. INFO-DIR-SECTION The Algorithmic Language Scheme START-INFO-DIR-ENTRY * R5RS: (r5rs). The Revised(5) Report on Scheme. END-INFO-DIR-ENTRY 20 February 1998  File: r5rs.info, Node: Top, Next: Introduction, Prev: (dir), Up: (dir) Revised(5) Report on the Algorithmic Language Scheme ****************************************************** RICHARD KELSEY, WILLIAM CLINGER, AND JONATHAN REES (Editors) H. ABELSON R. K. DYBVIG C. T. HAYNES G. J. ROZAS N. I. ADAMS IV D. P. FRIEDMAN E. KOHLBECKER G. L. STEELE JR. D. H. BARTLEY R. HALSTEAD D. OXLEY G. J. SUSSMAN G. BROOKS C. HANSON K. M. PITMAN M. WAND Dedicated to the Memory of Robert Hieb Summary ******* The report gives a defining description of the programming language Scheme. Scheme is a statically scoped and properly tail-recursive dialect of the Lisp programming language invented by Guy Lewis Steele Jr. and Gerald Jay Sussman. It was designed to have an exceptionally clear and simple semantics and few different ways to form expressions. A wide variety of programming paradigms, including imperative, functional, and message passing styles, find convenient expression in Scheme. The introduction offers a brief history of the language and of the report. The first three chapters present the fundamental ideas of the language and describe the notational conventions used for describing the language and for writing programs in the language. Chapters *Note Expressions:: and *Note Program structure:: describe the syntax and semantics of expressions, programs, and definitions. Chapter *Note Standard procedures:: describes Scheme's built-in procedures, which include all of the language's data manipulation and input/output primitives. Chapter *Note Formal syntax and semantics:: provides a formal syntax for Scheme written in extended BNF, along with a formal denotational semantics. An example of the use of the language follows the formal syntax and semantics. The report concludes with a list of references and an alphabetic index. Contents ******** * Menu: * Introduction:: * Overview of Scheme:: * Lexical conventions:: * Basic concepts:: * Expressions:: * Program structure:: * Standard procedures:: * Formal syntax and semantics:: * Notes:: * Additional material:: * Example:: * Bibliography:: * Index::  File: r5rs.info, Node: Introduction, Next: Overview of Scheme, Prev: Top, Up: Top Introduction ************ * Menu: * Background:: * Acknowledgements:: Programming languages should be designed not by piling feature on top of feature, but by removing the weaknesses and restrictions that make additional features appear necessary. Scheme demonstrates that a very small number of rules for forming expressions, with no restrictions on how they are composed, suffice to form a practical and efficient programming language that is flexible enough to support most of the major programming paradigms in use today. Scheme was one of the first programming languages to incorporate first class procedures as in the lambda calculus, thereby proving the usefulness of static scope rules and block structure in a dynamically typed language. Scheme was the first major dialect of Lisp to distinguish procedures from lambda expressions and symbols, to use a single lexical environment for all variables, and to evaluate the operator position of a procedure call in the same way as an operand position. By relying entirely on procedure calls to express iteration, Scheme emphasized the fact that tail-recursive procedure calls are essentially goto's that pass arguments. Scheme was the first widely used programming language to embrace first class escape procedures, from which all previously known sequential control structures can be synthesized. A subsequent version of Scheme introduced the concept of exact and inexact numbers, an extension of Common Lisp's generic arithmetic. More recently, Scheme became the first programming language to support hygienic macros, which permit the syntax of a block-structured language to be extended in a consistent and reliable manner.  File: r5rs.info, Node: Background, Next: Acknowledgements, Prev: Introduction, Up: Introduction Background ========== The first description of Scheme was written in 1975 [Scheme75]. A revised report [Scheme78] appeared in 1978, which described the evolution of the language as its MIT implementation was upgraded to support an innovative compiler [Rabbit]. Three distinct projects began in 1981 and 1982 to use variants of Scheme for courses at MIT, Yale, and Indiana University [Rees82], [MITScheme], [Scheme311]. An introductory computer science textbook using Scheme was published in 1984 [SICP]. As Scheme became more widespread, local dialects began to diverge until students and researchers occasionally found it difficult to understand code written at other sites. Fifteen representatives of the major implementations of Scheme therefore met in October 1984 to work toward a better and more widely accepted standard for Scheme. Their report [RRRS] was published at MIT and Indiana University in the summer of 1985. Further revision took place in the spring of 1986 [R3RS], and in the spring of 1988 [R4RS]. The present report reflects further revisions agreed upon in a meeting at Xerox PARC in June 1992. We intend this report to belong to the entire Scheme community, and so we grant permission to copy it in whole or in part without fee. In particular, we encourage implementors of Scheme to use this report as a starting point for manuals and other documentation, modifying it as necessary.  File: r5rs.info, Node: Acknowledgements, Prev: Background, Up: Introduction Acknowledgements ================ We would like to thank the following people for their help: Alan Bawden, Michael Blair, George Carrette, Andy Cromarty, Pavel Curtis, Jeff Dalton, Olivier Danvy, Ken Dickey, Bruce Duba, Marc Feeley, Andy Freeman, Richard Gabriel, Yekta G"ursel, Ken Haase, Robert Hieb, Paul Hudak, Morry Katz, Chris Lindblad, Mark Meyer, Jim Miller, Jim Philbin, John Ramsdell, Mike Shaff, Jonathan Shapiro, Julie Sussman, Perry Wagle, Daniel Weise, Henry Wu, and Ozan Yigit. We thank Carol Fessenden, Daniel Friedman, and Christopher Haynes for permission to use text from the Scheme 311 version 4 reference manual. We thank Texas Instruments, Inc. for permission to use text from the _TI Scheme Language Reference Manual_[TImanual85]. We gladly acknowledge the influence of manuals for MIT Scheme[MITScheme], T[Rees84], Scheme 84[Scheme84],Common Lisp[CLtL], and Algol 60[Naur63]. We also thank Betty Dexter for the extreme effort she put into setting this report in TeX, and Donald Knuth for designing the program that caused her troubles. The Artificial Intelligence Laboratory of the Massachusetts Institute of Technology, the Computer Science Department of Indiana University, the Computer and Information Sciences Department of the University of Oregon, and the NEC Research Institute supported the preparation of this report. Support for the MIT work was provided in part by the Advanced Research Projects Agency of the Department of Defense under Office of Naval Research contract N00014-80-C-0505. Support for the Indiana University work was provided by NSF grants NCS 83-04567 and NCS 83-03325.  File: r5rs.info, Node: Overview of Scheme, Next: Lexical conventions, Prev: Introduction, Up: Top 1 Overview of Scheme ******************** * Menu: * Semantics:: * Syntax:: * Notation and terminology::  File: r5rs.info, Node: Semantics, Next: Syntax, Prev: Overview of Scheme, Up: Overview of Scheme 1.1 Semantics ============= This section gives an overview of Scheme's semantics. A detailed informal semantics is the subject of chapters *Note Basic concepts:: through *Note Standard procedures::. For reference purposes, section *Note Formal semantics:: provides a formal semantics of Scheme. Following Algol, Scheme is a statically scoped programming language. Each use of a variable is associated with a lexically apparent binding of that variable. Scheme has latent as opposed to manifest types. Types are associated with values (also called objects) rather than with variables. (Some authors refer to languages with latent types as weakly typed or dynamically typed languages.) Other languages with latent types are APL, Snobol, and other dialects of Lisp. Languages with manifest types (sometimes referred to as strongly typed or statically typed languages) include Algol 60, Pascal, and C. All objects created in the course of a Scheme computation, including procedures and continuations, have unlimited extent. No Scheme object is ever destroyed. The reason that implementations of Scheme do not (usually!) run out of storage is that they are permitted to reclaim the storage occupied by an object if they can prove that the object cannot possibly matter to any future computation. Other languages in which most objects have unlimited extent include APL and other Lisp dialects. Implementations of Scheme are required to be properly tail-recursive. This allows the execution of an iterative computation in constant space, even if the iterative computation is described by a syntactically recursive procedure. Thus with a properly tail-recursive implementation, iteration can be expressed using the ordinary procedure-call mechanics, so that special iteration constructs are useful only as syntactic sugar. See section *Note Proper tail recursion::. Scheme procedures are objects in their own right. Procedures can be created dynamically, stored in data structures, returned as results of procedures, and so on. Other languages with these properties include Common Lisp and ML. One distinguishing feature of Scheme is that continuations, which in most other languages only operate behind the scenes, also have "first-class" status. Continuations are useful for implementing a wide variety of advanced control constructs, including non-local exits, backtracking, and coroutines. See section *Note Control features::. Arguments to Scheme procedures are always passed by value, which means that the actual argument expressions are evaluated before the procedure gains control, whether the procedure needs the result of the evaluation or not. ML, C, and APL are three other languages that always pass arguments by value. This is distinct from the lazy-evaluation semantics of Haskell, or the call-by-name semantics of Algol 60, where an argument expression is not evaluated unless its value is needed by the procedure. Scheme's model of arithmetic is designed to remain as independent as possible of the particular ways in which numbers are represented within a computer. In Scheme, every integer is a rational number, every rational is a real, and every real is a complex number. Thus the distinction between integer and real arithmetic, so important to many programming languages, does not appear in Scheme. In its place is a distinction between exact arithmetic, which corresponds to the mathematical ideal, and inexact arithmetic on approximations. As in Common Lisp, exact arithmetic is not limited to integers.  File: r5rs.info, Node: Syntax, Next: Notation and terminology, Prev: Semantics, Up: Overview of Scheme 1.2 Syntax ========== Scheme, like most dialects of Lisp, employs a fully parenthesized prefix notation for programs and (other) data; the grammar of Scheme generates a sublanguage of the language used for data. An important consequence of this simple, uniform representation is the susceptibility of Scheme programs and data to uniform treatment by other Scheme programs. For example, the `eval' procedure evaluates a Scheme program expressed as data. The `read' procedure performs syntactic as well as lexical decomposition of the data it reads. The `read' procedure parses its input as data (section *note External representation::), not as program. The formal syntax of Scheme is described in section *Note Formal syntax::.  File: r5rs.info, Node: Notation and terminology, Prev: Syntax, Up: Overview of Scheme 1.3 Notation and terminology ============================ * Menu: * Primitive; library; and optional features:: * Error situations and unspecified behavior:: * Entry format:: * Evaluation examples:: * Naming conventions::  File: r5rs.info, Node: Primitive; library; and optional features, Next: Error situations and unspecified behavior, Prev: Notation and terminology, Up: Notation and terminology 1.3.1 Primitive; library; and optional features ----------------------------------------------- It is required that every implementation of Scheme support all features that are not marked as being "optional". Implementations are free to omit optional features of Scheme or to add extensions, provided the extensions are not in conflict with the language reported here. In particular, implementations must support portable code by providing a syntactic mode that preempts no lexical conventions of this report. To aid in understanding and implementing Scheme, some features are marked as "library". These can be easily implemented in terms of the other, primitive, features. They are redundant in the strict sense of the word, but they capture common patterns of usage, and are therefore provided as convenient abbreviations.  File: r5rs.info, Node: Error situations and unspecified behavior, Next: Entry format, Prev: Primitive; library; and optional features, Up: Notation and terminology 1.3.2 Error situations and unspecified behavior ----------------------------------------------- When speaking of an error situation, this report uses the phrase "an error is signalled" to indicate that implementations must detect and report the error. If such wording does not appear in the discussion of an error, then implementations are not required to detect or report the error, though they are encouraged to do so. An error situation that implementations are not required to detect is usually referred to simply as "an error." For example, it is an error for a procedure to be passed an argument that the procedure is not explicitly specified to handle, even though such domain errors are seldom mentioned in this report. Implementations may extend a procedure's domain of definition to include such arguments. This report uses the phrase "may report a violation of an implementation restriction" to indicate circumstances under which an implementation is permitted to report that it is unable to continue execution of a correct program because of some restriction imposed by the implementation. Implementation restrictions are of course discouraged, but implementations are encouraged to report violations of implementation restrictions. For example, an implementation may report a violation of an implementation restriction if it does not have enough storage to run a program. If the value of an expression is said to be "unspecified," then the expression must evaluate to some object without signalling an error, but the value depends on the implementation; this report explicitly does not say what value should be returned.  File: r5rs.info, Node: Entry format, Next: Evaluation examples, Prev: Error situations and unspecified behavior, Up: Notation and terminology 1.3.3 Entry format ------------------ Chapters *Note Expressions:: and *Note Standard procedures:: are organized into entries. Each entry describes one language feature or a group of related features, where a feature is either a syntactic construct or a built-in procedure. An entry begins with one or more header lines of the form -- CATEGORY: TEMPLATE for required, primitive features, or -- QUALIFIER CATEGORY: TEMPLATE where QUALIFIER is either "library" or "optional" as defined in section *Note Primitive; library; and optional features::. If CATEGORY is "syntax", the entry describes an expression type, and the template gives the syntax of the expression type. Components of expressions are designated by syntactic variables, which are written using angle brackets, for example, , . Syntactic variables should be understood to denote segments of program text; for example, stands for any string of characters which is a syntactically valid expression. The notation ... indicates zero or more occurrences of a , and ... indicates one or more occurrences of a . If CATEGORY is "procedure", then the entry describes a procedure, and the header line gives a template for a call to the procedure. Argument names in the template are ITALICIZED. Thus the header line -- procedure: vector-ref VECTOR K indicates that the built-in procedure vector-ref takes two arguments, a vector VECTOR and an exact non-negative integer K (see below). The header lines -- procedure: make-vector K -- procedure: make-vector K FILL indicate that the make-vector procedure must be defined to take either one or two arguments. It is an error for an operation to be presented with an argument that it is not specified to handle. For succinctness, we follow the convention that if an argument name is also the name of a type listed in section *Note Disjointness of types::, then that argument must be of the named type. For example, the header line for vector-ref given above dictates that the first argument to vector-ref must be a vector. The following naming conventions also imply type restrictions: OBJ any object LIST, LIST1, ... LISTJ, ... list (see section *note Pairs and lists::) Z, Z1, ... ZJ, ... complex number X, X1, ... XJ, ... real number Y, Y1, ... YJ, ... real number Q, Q1, ... QJ, ... rational number N, N1, ... NJ, ... integer K, K1, ... KJ, ... exact non-negative integer  File: r5rs.info, Node: Evaluation examples, Next: Naming conventions, Prev: Entry format, Up: Notation and terminology 1.3.4 Evaluation examples ------------------------- The symbol "=>" used in program examples should be read "evaluates to." For example, (* 5 8) ==> 40 means that the expression (* 5 8) evaluates to the object 40. Or, more precisely: the expression given by the sequence of characters "(* 5 8)" evaluates, in the initial environment, to an object that may be represented externally by the sequence of characters "40". See section *Note External representations:: for a discussion of external representations of objects.  File: r5rs.info, Node: Naming conventions, Prev: Evaluation examples, Up: Notation and terminology 1.3.5 Naming conventions ------------------------ By convention, the names of procedures that always return a boolean value usually end in "`?'". Such procedures are called predicates. By convention, the names of procedures that store values into previously allocated locations (see section *note Storage model::) usually end in "`!'". Such procedures are called mutation procedures. By convention, the value returned by a mutation procedure is unspecified. By convention, "`->'" appears within the names of procedures that take an object of one type and return an analogous object of another type. For example, `list->vector' takes a list and returns a vector whose elements are the same as those of the list.  File: r5rs.info, Node: Lexical conventions, Next: Basic concepts, Prev: Overview of Scheme, Up: Top 2 Lexical conventions ********************* * Menu: * Identifiers:: * Whitespace and comments:: * Other notations:: This section gives an informal account of some of the lexical conventions used in writing Scheme programs. For a formal syntax of Scheme, see section *Note Formal syntax::. Upper and lower case forms of a letter are never distinguished except within character and string constants. For example, `Foo' is the same identifier as `FOO', and #x1AB is the same number as #X1ab.  File: r5rs.info, Node: Identifiers, Next: Whitespace and comments, Prev: Lexical conventions, Up: Lexical conventions 2.1 Identifiers =============== Most identifiers allowed by other programming languages are also acceptable to Scheme. The precise rules for forming identifiers vary among implementations of Scheme, but in all implementations a sequence of letters, digits, and "extended alphabetic characters" that begins with a character that cannot begin a number is an identifier. In addition, `+', `-', and `...' are identifiers. Here are some examples of identifiers: lambda q list->vector soup + V17a <=? a34kTMNs the-word-recursion-has-many-meanings Extended alphabetic characters may be used within identifiers as if they were letters. The following are extended alphabetic characters: ! $ % & * + - . / : < = > ? @ ^ _ ~ See section *Note Lexical structure:: for a formal syntax of identifiers. Identifiers have two uses within Scheme programs: * Any identifier may be used as a variable or as a syntactic keyword (see sections *note Variables; syntactic keywords; and regions:: and *note Macros::). * When an identifier appears as a literal or within a literal (see section *note Literal expressions::), it is being used to denote a _symbol_ (see section *note Symbols::).  File: r5rs.info, Node: Whitespace and comments, Next: Other notations, Prev: Identifiers, Up: Lexical conventions 2.2 Whitespace and comments =========================== "Whitespace" characters are spaces and newlines. (Implementations typically provide additional whitespace characters such as tab or page break.) Whitespace is used for improved readability and as necessary to separate tokens from each other, a token being an indivisible lexical unit such as an identifier or number, but is otherwise insignificant. Whitespace may occur between any two tokens, but not within a token. Whitespace may also occur inside a string, where it is significant. A semicolon (;) indicates the start of a comment. The comment continues to the end of the line on which the semicolon appears. Comments are invisible to Scheme, but the end of the line is visible as whitespace. This prevents a comment from appearing in the middle of an identifier or number. ;;; The FACT procedure computes the factorial ;;; of a non-negative integer. (define fact (lambda (n) (if (= n 0) 1 ;Base case: return 1 (* n (fact (- n 1))))))  File: r5rs.info, Node: Other notations, Prev: Whitespace and comments, Up: Lexical conventions 2.3 Other notations =================== For a description of the notations used for numbers, see section *Note Numbers::. . + - These are used in numbers, and may also occur anywhere in an identifier except as the first character. A delimited plus or minus sign by itself is also an identifier. A delimited period (not occurring within a number or identifier) is used in the notation for pairs (section *note Pairs and lists::), and to indicate a rest-parameter in a formal parameter list (section *note Procedures::). A delimited sequence of three successive periods is also an identifier. ( ) Parentheses are used for grouping and to notate lists (section *note Pairs and lists::). ' The single quote character is used to indicate literal data (section *note Literal expressions::). ` The backquote character is used to indicate almost-constant data (section *note Quasiquotation::). , ,@ The character comma and the sequence comma at-sign are used in conjunction with backquote (section *note Quasiquotation::). " The double quote character is used to delimit strings (section *note Strings::). \ Backslash is used in the syntax for character constants (section *note Characters::) and as an escape character within string constants (section *note Strings::). [ ] { } | Left and right square brackets and curly braces and vertical bar are reserved for possible future extensions to the language. # Sharp sign is used for a variety of purposes depending on the character that immediately follows it: #t #f These are the boolean constants (section *note Booleans::). #\ This introduces a character constant (section *note Characters::). #( This introduces a vector constant (section *note Vectors::). Vector constants are terminated by ) . #e #i #b #o #d #x These are used in the notation for numbers (section *note Syntax of numerical constants::).  File: r5rs.info, Node: Basic concepts, Next: Expressions, Prev: Lexical conventions, Up: Top 3 Basic concepts **************** * Menu: * Variables; syntactic keywords; and regions:: * Disjointness of types:: * External representations:: * Storage model:: * Proper tail recursion::  File: r5rs.info, Node: Variables; syntactic keywords; and regions, Next: Disjointness of types, Prev: Basic concepts, Up: Basic concepts 3.1 Variables; syntactic keywords; and regions ============================================== An identifier may name a type of syntax, or it may name a location where a value can be stored. An identifier that names a type of syntax is called a _syntactic keyword_ and is said to be _bound_ to that syntax. An identifier that names a location is called a _variable_ and is said to be _bound_ to that location. The set of all visible bindings in effect at some point in a program is known as the _environment_ in effect at that point. The value stored in the location to which a variable is bound is called the variable's value. By abuse of terminology, the variable is sometimes said to name the value or to be bound to the value. This is not quite accurate, but confusion rarely results from this practice. Certain expression types are used to create new kinds of syntax and bind syntactic keywords to those new syntaxes, while other expression types create new locations and bind variables to those locations. These expression types are called _binding constructs_. Those that bind syntactic keywords are listed in section *Note Macros::. The most fundamental of the variable binding constructs is the `lambda' expression, because all other variable binding constructs can be explained in terms of `lambda' expressions. The other variable binding constructs are `let', `let*', `letrec', and `do' expressions (see sections *note Procedures::, *note Binding constructs::, and *note Iteration::). Like Algol and Pascal, and unlike most other dialects of Lisp except for Common Lisp, Scheme is a statically scoped language with block structure. To each place where an identifier is bound in a program there corresponds a "region" of the program text within which the binding is visible. The region is determined by the particular binding construct that establishes the binding; if the binding is established by a `lambda' expression, for example, then its region is the entire `lambda' expression. Every mention of an identifier refers to the binding of the identifier that established the innermost of the regions containing the use. If there is no binding of the identifier whose region contains the use, then the use refers to the binding for the variable in the top level environment, if any (chapters *note Expressions:: and *note Standard procedures::); if there is no binding for the identifier, it is said to be "unbound".  File: r5rs.info, Node: Disjointness of types, Next: External representations, Prev: Variables; syntactic keywords; and regions, Up: Basic concepts 3.2 Disjointness of types ========================= No object satisfies more than one of the following predicates: boolean? pair? symbol? number? char? string? vector? port? procedure? These predicates define the types _boolean_, _pair_, _symbol_, _number_, _char_ (or _character_), _string_, _vector_, _port_, and _procedure_. The empty list is a special object of its own type; it satisfies none of the above predicates. Although there is a separate boolean type, any Scheme value can be used as a boolean value for the purpose of a conditional test. As explained in section *Note Booleans::, all values count as true in such a test except for #f. This report uses the word "true" to refer to any Scheme value except #f, and the word "false" to refer to #f.  File: r5rs.info, Node: External representations, Next: Storage model, Prev: Disjointness of types, Up: Basic concepts 3.3 External representations ============================ An important concept in Scheme (and Lisp) is that of the _external representation_ of an object as a sequence of characters. For example, an external representation of the integer 28 is the sequence of characters "28", and an external representation of a list consisting of the integers 8 and 13 is the sequence of characters "(8 13)". The external representation of an object is not necessarily unique. The integer 28 also has representations "#e28.000" and "#x1c", and the list in the previous paragraph also has the representations "( 08 13 )" and "(8 . (13 . ()))" (see section *note Pairs and lists::). Many objects have standard external representations, but some, such as procedures, do not have standard representations (although particular implementations may define representations for them). An external representation may be written in a program to obtain the corresponding object (see `quote', section *note Literal expressions::). External representations can also be used for input and output. The procedure `read' (section *note Input::) parses external representations, and the procedure `write' (section *note Output::) generates them. Together, they provide an elegant and powerful input/output facility. Note that the sequence of characters "(+ 2 6)" is _not_ an external representation of the integer 8, even though it _is_ an expression evaluating to the integer 8; rather, it is an external representation of a three-element list, the elements of which are the symbol + and the integers 2 and 6. Scheme's syntax has the property that any sequence of characters that is an expression is also the external representation of some object. This can lead to confusion, since it may not be obvious out of context whether a given sequence of characters is intended to denote data or program, but it is also a source of power, since it facilitates writing programs such as interpreters and compilers that treat programs as data (or vice versa). The syntax of external representations of various kinds of objects accompanies the description of the primitives for manipulating the objects in the appropriate sections of chapter *Note Standard procedures::.  File: r5rs.info, Node: Storage model, Next: Proper tail recursion, Prev: External representations, Up: Basic concepts 3.4 Storage model ================= Variables and objects such as pairs, vectors, and strings implicitly denote locations or sequences of locations. A string, for example, denotes as many locations as there are characters in the string. (These locations need not correspond to a full machine word.) A new value may be stored into one of these locations using the string-set! procedure, but the string continues to denote the same locations as before. An object fetched from a location, by a variable reference or by a procedure such as `car', `vector-ref', or `string-ref', is equivalent in the sense of `eqv?' (section *note Equivalence predicates::) to the object last stored in the location before the fetch. Every location is marked to show whether it is in use. No variable or object ever refers to a location that is not in use. Whenever this report speaks of storage being allocated for a variable or object, what is meant is that an appropriate number of locations are chosen from the set of locations that are not in use, and the chosen locations are marked to indicate that they are now in use before the variable or object is made to denote them. In many systems it is desirable for constants (i.e. the values of literal expressions) to reside in read-only-memory. To express this, it is convenient to imagine that every object that denotes locations is associated with a flag telling whether that object is mutable or immutable. In such systems literal constants and the strings returned by `symbol->string' are immutable objects, while all objects created by the other procedures listed in this report are mutable. It is an error to attempt to store a new value into a location that is denoted by an immutable object.  File: r5rs.info, Node: Proper tail recursion, Prev: Storage model, Up: Basic concepts 3.5 Proper tail recursion ========================= Implementations of Scheme are required to be _properly tail-recursive_. Procedure calls that occur in certain syntactic contexts defined below are `tail calls'. A Scheme implementation is properly tail-recursive if it supports an unbounded number of active tail calls. A call is _active_ if the called procedure may still return. Note that this includes calls that may be returned from either by the current continuation or by continuations captured earlier by `call-with-current-continuation' that are later invoked. In the absence of captured continuations, calls could return at most once and the active calls would be those that had not yet returned. A formal definition of proper tail recursion can be found in [propertailrecursion]. _Rationale:_ Intuitively, no space is needed for an active tail call because the continuation that is used in the tail call has the same semantics as the continuation passed to the procedure containing the call. Although an improper implementation might use a new continuation in the call, a return to this new continuation would be followed immediately by a return to the continuation passed to the procedure. A properly tail-recursive implementation returns to that continuation directly. Proper tail recursion was one of the central ideas in Steele and Sussman's original version of Scheme. Their first Scheme interpreter implemented both functions and actors. Control flow was expressed using actors, which differed from functions in that they passed their results on to another actor instead of returning to a caller. In the terminology of this section, each actor finished with a tail call to another actor. Steele and Sussman later observed that in their interpreter the code for dealing with actors was identical to that for functions and thus there was no need to include both in the language. A _tail call_ is a procedure call that occurs in a _tail context_. Tail contexts are defined inductively. Note that a tail context is always determined with respect to a particular lambda expression. * The last expression within the body of a lambda expression, shown as below, occurs in a tail context. (lambda * * ) * If one of the following expressions is in a tail context, then the subexpressions shown as are in a tail context. These were derived from rules in the grammar given in chapter *Note Formal syntax and semantics:: by replacing some occurrences of with . Only those rules that contain tail contexts are shown here. (if ) (if ) (cond +) (cond * (else )) (case +) (case * (else )) (and * ) (or * ) (let (*) ) (let (*) ) (let* (*) ) (letrec (*) ) (let-syntax (*) ) (letrec-syntax (*) ) (begin ) (do (*) ( ) *) where -> ( ) -> ((*) ) -> * -> * * If a `cond' expression is in a tail context, and has a clause of the form `( => )' then the (implied) call to the procedure that results from the evaluation of is in a tail context. itself is not in a tail context. Certain built-in procedures are also required to perform tail calls. The first argument passed to `apply' and to `call-with-current-continuation', and the second argument passed to `call-with-values', must be called via a tail call. Similarly, `eval' must evaluate its argument as if it were in tail position within the `eval' procedure. In the following example the only tail call is the call to `f'. None of the calls to `g' or `h' are tail calls. The reference to `x' is in a tail context, but it is not a call and thus is not a tail call. (lambda () (if (g) (let ((x (h))) x) (and (g) (f)))) _Note:_ Implementations are allowed, but not required, to recognize that some non-tail calls, such as the call to `h' above, can be evaluated as though they were tail calls. In the example above, the `let' expression could be compiled as a tail call to `h'. (The possibility of `h' returning an unexpected number of values can be ignored, because in that case the effect of the `let' is explicitly unspecified and implementation-dependent.)  File: r5rs.info, Node: Expressions, Next: Program structure, Prev: Basic concepts, Up: Top 4 Expressions ************* * Menu: * Primitive expression types:: * Derived expression types:: * Macros:: Expression types are categorized as _primitive_ or _derived_. Primitive expression types include variables and procedure calls. Derived expression types are not semantically primitive, but can instead be defined as macros. With the exception of `quasiquote', whose macro definition is complex, the derived expressions are classified as library features. Suitable definitions are given in section *Note Derived expression type::.  File: r5rs.info, Node: Primitive expression types, Next: Derived expression types, Prev: Expressions, Up: Expressions 4.1 Primitive expression types ============================== * Menu: * Variable references:: * Literal expressions:: * Procedure calls:: * Procedures:: * Conditionals:: * Assignments::  File: r5rs.info, Node: Variable references, Next: Literal expressions, Prev: Primitive expression types, Up: Primitive expression types 4.1.1 Variable references ------------------------- -- syntax: An expression consisting of a variable (section *note Variables; syntactic keywords; and regions::) is a variable reference. The value of the variable reference is the value stored in the location to which the variable is bound. It is an error to reference an unbound variable. (define x 28) x ==> 28  File: r5rs.info, Node: Literal expressions, Next: Procedure calls, Prev: Variable references, Up: Primitive expression types 4.1.2 Literal expressions ------------------------- -- syntax: quote -- syntax: ' -- syntax: `(quote )' evaluates to . may be any external representation of a Scheme object (see section *note External representations::). This notation is used to include literal constants in Scheme code. (quote a) ==> a (quote #(a b c)) ==> #(a b c) (quote (+ 1 2)) ==> (+ 1 2) `(quote )' may be abbreviated as '. The two notations are equivalent in all respects. 'a ==> a '#(a b c) ==> #(a b c) '() ==> () '(+ 1 2) ==> (+ 1 2) '(quote a) ==> (quote a) "a ==> (quote a) Numerical constants, string constants, character constants, and boolean constants evaluate "to themselves"; they need not be quoted. '"abc" ==> "abc" "abc" ==> "abc" '145932 ==> 145932 145932 ==> 145932 '#t ==> #t #t ==> #t As noted in section *Note Storage model::, it is an error to alter a constant (i.e. the value of a literal expression) using a mutation procedure like `set-car!' or `string-set!'.  File: r5rs.info, Node: Procedure calls, Next: Procedures, Prev: Literal expressions, Up: Primitive expression types 4.1.3 Procedure calls --------------------- -- syntax: ..., A procedure call is written by simply enclosing in parentheses expressions for the procedure to be called and the arguments to be passed to it. The operator and operand expressions are evaluated (in an unspecified order) and the resulting procedure is passed the resulting arguments. (+ 3 4) ==> 7 ((if #f + *) 3 4) ==> 12 A number of procedures are available as the values of variables in the initial environment; for example, the addition and multiplication procedures in the above examples are the values of the variables `+' and `*'. New procedures are created by evaluating lambda expressions (see section *note Procedures::). Procedure calls may return any number of values (see `values' in section *note Control features::). With the exception of `values' the procedures available in the initial environment return one value or, for procedures such as `apply', pass on the values returned by a call to one of their arguments. Procedure calls are also called _combinations_. _Note:_ In contrast to other dialects of Lisp, the order of evaluation is unspecified, and the operator expression and the operand expressions are always evaluated with the same evaluation rules. _Note:_ Although the order of evaluation is otherwise unspecified, the effect of any concurrent evaluation of the operator and operand expressions is constrained to be consistent with some sequential order of evaluation. The order of evaluation may be chosen differently for each procedure call. _Note:_ In many dialects of Lisp, the empty combination, (), is a legitimate expression. In Scheme, combinations must have at least one subexpression, so () is not a syntactically valid expression.  File: r5rs.info, Node: Procedures, Next: Conditionals, Prev: Procedure calls, Up: Primitive expression types 4.1.4 Procedures ---------------- -- syntax: lambda _Syntax:_ should be a formal arguments list as described below, and should be a sequence of one or more expressions. _Semantics:_ A lambda expression evaluates to a procedure. The environment in effect when the lambda expression was evaluated is remembered as part of the procedure. When the procedure is later called with some actual arguments, the environment in which the lambda expression was evaluated will be extended by binding the variables in the formal argument list to fresh locations, the corresponding actual argument values will be stored in those locations, and the expressions in the body of the lambda expression will be evaluated sequentially in the extended environment. The result(s) of the last expression in the body will be returned as the result(s) of the procedure call. (lambda (x) (+ x x)) ==> __a procedure ((lambda (x) (+ x x)) 4) ==> 8 (define reverse-subtract (lambda (x y) (- y x))) (reverse-subtract 7 10) ==> 3 (define add4 (let ((x 4)) (lambda (y) (+ x y)))) (add4 6) ==> 10 should have one of the following forms: * ( ...,): The procedure takes a fixed number of arguments; when the procedure is called, the arguments will be stored in the bindings of the corresponding variables. * : The procedure takes any number of arguments; when the procedure is called, the sequence of actual arguments is converted into a newly allocated list, and the list is stored in the binding of the . * ( ..., . ): If a space-delimited period precedes the last variable, then the procedure takes n or more arguments, where n is the number of formal arguments before the period (there must be at least one). The value stored in the binding of the last variable will be a newly allocated list of the actual arguments left over after all the other actual arguments have been matched up against the other formal arguments. It is an error for a to appear more than once in . ((lambda x x) 3 4 5 6) ==> (3 4 5 6) ((lambda (x y . z) z) 3 4 5 6) ==> (5 6) Each procedure created as the result of evaluating a lambda expression is (conceptually) tagged with a storage location, in order to make `eqv?' and `eq?' work on procedures (see section *note Equivalence predicates::).  File: r5rs.info, Node: Conditionals, Next: Assignments, Prev: Procedures, Up: Primitive expression types 4.1.5 Conditionals ------------------ -- syntax: if -- syntax: if _Syntax:_ , , and may be arbitrary expressions. _Semantics:_ An `if' expression is evaluated as follows: first, is evaluated. If it yields a true value (see section *note Booleans::), then is evaluated and its value(s) is(are) returned. Otherwise is evaluated and its value(s) is(are) returned. If yields a false value and no is specified, then the result of the expression is unspecified. (if (> 3 2) 'yes 'no) ==> yes (if (> 2 3) 'yes 'no) ==> no (if (> 3 2) (- 3 2) (+ 3 2)) ==> 1  File: r5rs.info, Node: Assignments, Prev: Conditionals, Up: Primitive expression types 4.1.6 Assignments ----------------- -- syntax: set! is evaluated, and the resulting value is stored in the location to which is bound. must be bound either in some region enclosing the `set!' expression or at top level. The result of the `set!' expression is unspecified. (define x 2) (+ x 1) ==> 3 (set! x 4) ==> _unspecified_ (+ x 1) ==> 5  File: r5rs.info, Node: Derived expression types, Next: Macros, Prev: Primitive expression types, Up: Expressions 4.2 Derived expression types ============================ * Menu: * Conditional:: * Binding constructs:: * Sequencing:: * Iteration:: * Delayed evaluation:: * Quasiquotation:: The constructs in this section are hygienic, as discussed in section *Note Macros::. For reference purposes, section *Note Derived expression type:: gives macro definitions that will convert most of the constructs described in this section into the primitive constructs described in the previous section.  File: r5rs.info, Node: Conditional, Next: Binding constructs, Prev: Derived expression types, Up: Derived expression types 4.2.1 Conditionals ------------------ -- library syntax: cond ..., _Syntax:_ Each should be of the form ( ...,) where is any expression. Alternatively, a may be of the form ( => ) The last may be an "else clause," which has the form (else ...,). _Semantics:_ A `cond' expression is evaluated by evaluating the expressions of successive s in order until one of them evaluates to a true value (see section *note Booleans::). When a evaluates to a true value, then the remaining s in its are evaluated in order, and the result(s) of the last in the is(are) returned as the result(s) of the entire `cond' expression. If the selected contains only the and no s, then the value of the is returned as the result. If the selected uses the `=>' alternate form, then the is evaluated. Its value must be a procedure that accepts one argument; this procedure is then called on the value of the and the value(s) returned by this procedure is(are) returned by the `cond' expression. If all s evaluate to false values, and there is no else clause, then the result of the conditional expression is unspecified; if there is an else clause, then its s are evaluated, and the value(s) of the last one is(are) returned. (cond ((> 3 2) 'greater) ((< 3 2) 'less)) ==> greater (cond ((> 3 3) 'greater) ((< 3 3) 'less) (else 'equal)) ==> equal (cond ((assv 'b '((a 1) (b 2))) => cadr) (else #f)) ==> 2 -- library syntax: case ..., _Syntax:_ may be any expression. Each should have the form (( ...,) ...,), where each is an external representation of some object. All the s must be distinct. The last may be an "else clause," which has the form (else ...,). _Semantics:_ A `case' expression is evaluated as follows. is evaluated and its result is compared against each . If the result of evaluating is equivalent (in the sense of `eqv?'; see section *note Equivalence predicates::) to a , then the expressions in the corresponding are evaluated from left to right and the result(s) of the last expression in the is(are) returned as the result(s) of the `case' expression. If the result of evaluating is different from every , then if there is an else clause its expressions are evaluated and the result(s) of the last is(are) the result(s) of the `case' expression; otherwise the result of the `case' expression is unspecified. (case (* 2 3) ((2 3 5 7) 'prime) ((1 4 6 8 9) 'composite)) ==> composite (case (car '(c d)) ((a) 'a) ((b) 'b)) ==> _unspecified_ (case (car '(c d)) ((a e i o u) 'vowel) ((w y) 'semivowel) (else 'consonant)) ==> consonant -- library syntax: and ..., The expressions are evaluated from left to right, and the value of the first expression that evaluates to a false value (see section *note Booleans::) is returned. Any remaining expressions are not evaluated. If all the expressions evaluate to true values, the value of the last expression is returned. If there are no expressions then #t is returned. (and (= 2 2) (> 2 1)) ==> #t (and (= 2 2) (< 2 1)) ==> #f (and 1 2 'c '(f g)) ==> (f g) (and) ==> #t -- library syntax: or ..., The expressions are evaluated from left to right, and the value of the first expression that evaluates to a true value (see section *note Booleans::) is returned. Any remaining expressions are not evaluated. If all expressions evaluate to false values, the value of the last expression is returned. If there are no expressions then #f is returned. (or (= 2 2) (> 2 1)) ==> #t (or (= 2 2) (< 2 1)) ==> #t (or #f #f #f) ==> #f (or (memq 'b '(a b c)) (/ 3 0)) ==> (b c)  File: r5rs.info, Node: Binding constructs, Next: Sequencing, Prev: Conditional, Up: Derived expression types 4.2.2 Binding constructs ------------------------ The three binding constructs `let', `let*', and `letrec' give Scheme a block structure, like Algol 60. The syntax of the three constructs is identical, but they differ in the regions they establish for their variable bindings. In a `let' expression, the initial values are computed before any of the variables become bound; in a `let*' expression, the bindings and evaluations are performed sequentially; while in a `letrec' expression, all the bindings are in effect while their initial values are being computed, thus allowing mutually recursive definitions. -- library syntax: let _Syntax:_ should have the form (( ) ...,), where each is an expression, and should be a sequence of one or more expressions. It is an error for a to appear more than once in the list of variables being bound. _Semantics:_ The s are evaluated in the current environment (in some unspecified order), the s are bound to fresh locations holding the results, the is evaluated in the extended environment, and the value(s) of the last expression of is(are) returned. Each binding of a has as its region. (let ((x 2) (y 3)) (* x y)) ==> 6 (let ((x 2) (y 3)) (let ((x 7) (z (+ x y))) (* z x))) ==> 35 See also named `let', section *Note Iteration::. -- library syntax: let* _Syntax:_ should have the form (( ) ...,), and should be a sequence of one or more expressions. _Semantics:_ `Let*' is similar to `let', but the bindings are performed sequentially from left to right, and the region of a binding indicated by `( )' is that part of the `let*' expression to the right of the binding. Thus the second binding is done in an environment in which the first binding is visible, and so on. (let ((x 2) (y 3)) (let* ((x 7) (z (+ x y))) (* z x))) ==> 70 -- library syntax: letrec _Syntax:_ should have the form (( ) ...,), and should be a sequence of one or more expressions. It is an error for a to appear more than once in the list of variables being bound. _Semantics:_ The s are bound to fresh locations holding undefined values, the s are evaluated in the resulting environment (in some unspecified order), each is assigned to the result of the corresponding , the is evaluated in the resulting environment, and the value(s) of the last expression in is(are) returned. Each binding of a has the entire `letrec' expression as its region, making it possible to define mutually recursive procedures. (letrec ((even? (lambda (n) (if (zero? n) #t (odd? (- n 1))))) (odd? (lambda (n) (if (zero? n) #f (even? (- n 1)))))) (even? 88)) ==> #t One restriction on `letrec' is very important: it must be possible to evaluate each without assigning or referring to the value of any . If this restriction is violated, then it is an error. The restriction is necessary because Scheme passes arguments by value rather than by name. In the most common uses of `letrec', all the s are lambda expressions and the restriction is satisfied automatically.  File: r5rs.info, Node: Sequencing, Next: Iteration, Prev: Binding constructs, Up: Derived expression types 4.2.3 Sequencing ---------------- -- library syntax: begin ..., The s are evaluated sequentially from left to right, and the value(s) of the last is(are) returned. This expression type is used to sequence side effects such as input and output. (define x 0) (begin (set! x 5) (+ x 1)) ==> 6 (begin (display "4 plus 1 equals ") (display (+ 4 1))) ==> _unspecified_ _and prints_ 4 plus 1 equals 5  File: r5rs.info, Node: Iteration, Next: Delayed evaluation, Prev: Sequencing, Up: Derived expression types 4.2.4 Iteration --------------- -- library syntax: do (( ) ...) ( ...) ... `Do' is an iteration construct. It specifies a set of variables to be bound, how they are to be initialized at the start, and how they are to be updated on each iteration. When a termination condition is met, the loop exits after evaluating the s. `Do' expressions are evaluated as follows: The expressions are evaluated (in some unspecified order), the s are bound to fresh locations, the results of the expressions are stored in the bindings of the s, and then the iteration phase begins. Each iteration begins by evaluating ; if the result is false (see section *note Booleans::), then the expressions are evaluated in order for effect, the expressions are evaluated in some unspecified order, the s are bound to fresh locations, the results of the s are stored in the bindings of the s, and the next iteration begins. If evaluates to a true value, then the s are evaluated from left to right and the value(s) of the last is(are) returned. If no s are present, then the value of the `do' expression is unspecified. The region of the binding of a consists of the entire `do' expression except for the s. It is an error for a to appear more than once in the list of `do' variables. A may be omitted, in which case the effect is the same as if `( )' had been written instead of `( )'. (do ((vec (make-vector 5)) (i 0 (+ i 1))) ((= i 5) vec) (vector-set! vec i i)) ==> #(0 1 2 3 4) (let ((x '(1 3 5 7 9))) (do ((x x (cdr x)) (sum 0 (+ sum (car x)))) ((null? x) sum))) ==> 25 -- library syntax: let "Named `let'" is a variant on the syntax of `let' which provides a more general looping construct than `do' and may also be used to express recursions. It has the same syntax and semantics as ordinary `let' except that is bound within to a procedure whose formal arguments are the bound variables and whose body is . Thus the execution of may be repeated by invoking the procedure named by . (let loop ((numbers '(3 -2 1 6 -5)) (nonneg '()) (neg '())) (cond ((null? numbers) (list nonneg neg)) ((>= (car numbers) 0) (loop (cdr numbers) (cons (car numbers) nonneg) neg)) ((< (car numbers) 0) (loop (cdr numbers) nonneg (cons (car numbers) neg))))) ==> ((6 1 3) (-5 -2))  File: r5rs.info, Node: Delayed evaluation, Next: Quasiquotation, Prev: Iteration, Up: Derived expression types 4.2.5 Delayed evaluation ------------------------ -- library syntax: delay The `delay' construct is used together with the procedure `force' to implement "lazy evaluation" or "call by need". (delay ) returns an object called a "promise" which at some point in the future may be asked (by the `force' procedure) to evaluate , and deliver the resulting value. The effect of returning multiple values is unspecified. See the description of `force' (section *note Control features::) for a more complete description of `delay'.  File: r5rs.info, Node: Quasiquotation, Prev: Delayed evaluation, Up: Derived expression types 4.2.6 Quasiquotation -------------------- -- syntax: quasiquote -- syntax: ` "Backquote" or "quasiquote" expressions are useful for constructing a list or vector structure when most but not all of the desired structure is known in advance. If no commas appear within the , the result of evaluating ` is equivalent to the result of evaluating '. If a comma appears within the , however, the expression following the comma is evaluated ("unquoted") and its result is inserted into the structure instead of the comma and the expression. If a comma appears followed immediately by an at-sign (@), then the following expression must evaluate to a list; the opening and closing parentheses of the list are then "stripped away" and the elements of the list are inserted in place of the comma at-sign expression sequence. A comma at-sign should only appear within a list or vector . `(list ,(+ 1 2) 4) ==> (list 3 4) (let ((name 'a)) `(list ,name ',name)) ==> (list a (quote a)) `(a ,(+ 1 2) ,@(map abs '(4 -5 6)) b) ==> (a 3 4 5 6 b) `((`foo' ,(- 10 3)) ,@(cdr '(c)) . ,(car '(cons))) ==> ((foo 7) . cons) `#(10 5 ,(sqrt 4) ,@(map sqrt '(16 9)) 8) ==> #(10 5 2 4 3 8) Quasiquote forms may be nested. Substitutions are made only for unquoted components appearing at the same nesting level as the outermost backquote. The nesting level increases by one inside each successive quasiquotation, and decreases by one inside each unquotation. `(a `(b ,(+ 1 2) ,(foo ,(+ 1 3) d) e) f) ==> (a `(b ,(+ 1 2) ,(foo 4 d) e) f) (let ((name1 'x) (name2 'y)) `(a `(b ,,name1 ,',name2 d) e)) ==> (a `(b ,x ,'y d) e) The two notations ` and (quasiquote ) are identical in all respects. `,' is identical to `(unquote )', and `,@' is identical to `(unquote-splicing )'. The external syntax generated by `write' for two-element lists whose car is one of these symbols may vary between implementations. (quasiquote (list (unquote (+ 1 2)) 4)) ==> (list 3 4) '(quasiquote (list (unquote (+ 1 2)) 4)) ==> `(list ,(+ 1 2) 4) __i.e., (quasiquote (list (unquote (+ 1 2)) 4)) Unpredictable behavior can result if any of the symbols `quasiquote', `unquote', or `unquote-splicing' appear in positions within a otherwise than as described above.  File: r5rs.info, Node: Macros, Prev: Derived expression types, Up: Expressions 4.3 Macros ========== * Menu: * Binding constructs for syntactic keywords:: * Pattern language:: Scheme programs can define and use new derived expression types, called _macros_. Program-defined expression types have the syntax ( ...) where is an identifier that uniquely determines the expression type. This identifier is called the _syntactic keyword_, or simply _keyword_, of the macro. The number of the s, and their syntax, depends on the expression type. Each instance of a macro is called a _use_ of the macro. The set of rules that specifies how a use of a macro is transcribed into a more primitive expression is called the _transformer_ of the macro. The macro definition facility consists of two parts: * A set of expressions used to establish that certain identifiers are macro keywords, associate them with macro transformers, and control the scope within which a macro is defined, and * a pattern language for specifying macro transformers. The syntactic keyword of a macro may shadow variable bindings, and local variable bindings may shadow keyword bindings. All macros defined using the pattern language are "hygienic" and "referentially transparent" and thus preserve Scheme's lexical scoping [Kohlbecker86], [ hygienic], [Bawden88], [macrosthatwork], [syntacticabstraction]: * If a macro transformer inserts a binding for an identifier (variable or keyword), the identifier will in effect be renamed throughout its scope to avoid conflicts with other identifiers. Note that a `define' at top level may or may not introduce a binding; see section *Note Definitions::. * If a macro transformer inserts a free reference to an identifier, the reference refers to the binding that was visible where the transformer was specified, regardless of any local bindings that may surround the use of the macro.  File: r5rs.info, Node: Binding constructs for syntactic keywords, Next: Pattern language, Prev: Macros, Up: Macros 4.3.1 Binding constructs for syntactic keywords ----------------------------------------------- `Let-syntax' and `letrec-syntax' are analogous to `let' and `letrec', but they bind syntactic keywords to macro transformers instead of binding variables to locations that contain values. Syntactic keywords may also be bound at top level; see section *Note Syntax definitions::. -- syntax: let-syntax _Syntax:_ should have the form (( ) ...,) Each is an identifier, each is an instance of `syntax-rules', and should be a sequence of one or more expressions. It is an error for a to appear more than once in the list of keywords being bound. _Semantics:_ The is expanded in the syntactic environment obtained by extending the syntactic environment of the `let-syntax' expression with macros whose keywords are the s, bound to the specified transformers. Each binding of a has as its region. (let-syntax ((when (syntax-rules () ((when test stmt1 stmt2 ...) (if test (begin stmt1 stmt2 ...)))))) (let ((if #t)) (when if (set! if 'now)) if)) ==> now (let ((x 'outer)) (let-syntax ((m (syntax-rules () ((m) x)))) (let ((x 'inner)) (m)))) ==> outer -- syntax: letrec-syntax _Syntax:_ Same as for `let-syntax'. _Semantics:_ The is expanded in the syntactic environment obtained by extending the syntactic environment of the `letrec-syntax' expression with macros whose keywords are the s, bound to the specified transformers. Each binding of a has the as well as the within its region, so the transformers can transcribe expressions into uses of the macros introduced by the `letrec-syntax' expression. (letrec-syntax ((my-or (syntax-rules () ((my-or) #f) ((my-or e) e) ((my-or e1 e2 ...) (let ((temp e1)) (if temp temp (my-or e2 ...))))))) (let ((x #f) (y 7) (temp 8) (let odd?) (if even?)) (my-or x (let temp) (if y) y))) ==> 7  File: r5rs.info, Node: Pattern language, Prev: Binding constructs for syntactic keywords, Up: Macros 4.3.2 Pattern language ---------------------- A has the following form: -- : syntax-rules ..., _Syntax:_ is a list of identifiers and each should be of the form (