# # config/config.mk # # This is the iRODS configuration Makefile included in all other # Makefiles used to build the servers and clients. # # The iRODS configuration script copies config/config.mk.in to # config/config.mk, filling in its best guesses on the OS platform # and its features. You can edit this file by hand to modify # those guesses. # # # Values filled in by the 'configure' script: # OS_platform The OS for this build. Platforms supported: # alpha_platform # sgi_platform # solaris_platform # sunos_platform # aix_platform # osx_platform # linux_platform # # FILE_64BITS Whether 64-bit file sizes are supported. # # ADDR_64BITS Whether 64-bit addressing is supported. # # PARA_OPR A 1 to enable parallel operations. # # RODS_CAT A 1 to enable the iCAT in the iRODS server. # # PSQICAT A 1 if the iCAT uses an Postgres database. # # POSTGRES_HOME The home directory of Postgres, if PSQICAT = 1 # # ORAICAT A 1 if the iCAT uses an Oracle database. # # MYICAT A 1 if the iCAT uses an MySQL database. # # ORACLE_HOME The home directory of Oracle, if ORAICAT = 1 # # NEW_ODBC A 1 if the Postgres interface uses the unix ODBC. # # MODULES The list of modules enabled during configuration. # Module names are the names of directories in # the 'modules' subdirectory. # OS_platform=linux_platform #osx_106plus= FILE_64BITS=1 ADDR_64BITS=1 MODULES= properties ERA msoDrivers examples PARA_OPR=1 #RODS_CAT= #PSQICAT= #POSTGRES_HOME= #NEW_ODBC= #ORAICAT= #MYICAT= #UNIXODBC_HOME= #UNIXODBC_DATASOURCE= ifndef ORACLE_HOME ORACLE_HOME= endif # # Configure the rule engine server # # RULE_ENGINE and RULE_ENGINE_N define whether one of the Rule Engines is enabled. # The former enables version 2.5, while the latter enables version 3.0. # Version 2.5 may not support all features that are supported by version 3.0. # # Enable this normally unless you are debugging some # particular module and dont want the rule engine to mess up the flow. RULE_ENGINE_N=1 #RULE_ENGINE=1 # # Check which database is in use for the iCAT # ifdef RODS_CAT # Postgres ifdef PSQICAT PSQ_DBMS = 1 endif # Oracle ifdef ORAICAT ORA_DBMS = 1 endif # MySQL ifdef MYICAT MY_DBMS = 1 endif endif # # Adjust for the Postgres iCAT # ifdef PSQICAT RODS_CAT = 1 PSQ_DBMS = 1 DBMS_INCLUDE+= -DPSQICAT endif # # Adjust for the Oracle iCAT # ifdef ORAICAT RODS_CAT = 1 ORA_DBMS = 1 endif # # Adjust for the MySQL iCAT # ifdef MYICAT RODS_CAT = 1 MY_DBMS = 1 endif # # Postgres options # ifdef PSQ_DBMS ifeq ($(OS_platform), osx_platform) NSL= else NSL=-lnsl endif PSQ_LIB_DIR = $(POSTGRES_HOME)/lib PSQ_HDR_DIR = $(POSTGRES_HOME)/include ifdef NEW_ODBC DBMS_LIB+= -L$(PSQ_LIB_DIR) -lodbc $(NSL) -lm else DBMS_LIB+= -L$(PSQ_LIB_DIR) -lpsqlodbc $(NSL) -lm endif DBMS_INCLUDE+= -I$(PSQ_HDR_DIR) endif # # Oracle options # ifdef ORA_DBMS ifdef ADDR_64BITS ORA_LIB_DIR = $(ORACLE_HOME)/lib else ifeq ($(OS_platform), osx_platform) ORA_LIB_DIR = $(ORACLE_HOME)/lib32 else ORA_LIB_DIR = $(ORACLE_HOME)/lib endif endif ORA_HDR_DIR = $(ORACLE_HOME)/rdbms/public DBMS_LIB+= -L$(ORA_LIB_DIR) -lclntsh DBMS_INCLUDE+= -I$(ORA_HDR_DIR) ifneq ($(findstring /xe/, $(ORACLE_HOME)),) # For Oracle xe, also need nnz10 library DBMS_LIB+= -lnnz10 endif endif # # MySQL options # ifdef MY_DBMS ifeq ($(OS_platform), osx_platform) NSL= else NSL=-lnsl endif ODBC_LIB_DIR = $(UNIXODBC_HOME)/lib ODBC_HDR_DIR = $(UNIXODBC_HOME)/include DBMS_LIB+= -L$(ODBC_LIB_DIR) -lodbc $(NSL) -lm DBMS_INCLUDE+= -I$(ODBC_HDR_DIR) endif # # DBR (database-resource) options # #DBR=1 ifdef DBR DBR_TYPE=postgres POSTGRES_HOME=/tbox/IRODS_BUILD/iRODS/../pgsql ifeq ($(OS_platform), osx_platform) NSL= else NSL=-lnsl endif PSQ_LIB_DIR = $(POSTGRES_HOME)/lib PSQ_HDR_DIR = $(POSTGRES_HOME)/include DBMS_LIB+= -L$(PSQ_LIB_DIR) -lodbc $(NSL) -lm DBMS_INCLUDE+= -I$(PSQ_HDR_DIR) # Use lines like these, in place of the Postgres items above # (under ifdef DBR), for an Oracle DBR, using values for your # Oracle installation: #DBR_TYPE=oracle #ORACLE_HOME=/usr/local/apps/oracle/home_102 #ORA_LIB_DIR = $(ORACLE_HOME)/lib #ORA_HDR_DIR = $(ORACLE_HOME)/rdbms/public #DBMS_LIB+= -L$(ORA_LIB_DIR) -lclntsh #DBMS_INCLUDE+= -I$(ORA_HDR_DIR) # Use lines like these, in place of the Postgres items above # for mysql: #DBR_TYPE=mysql #NEW_ODBC=1 #UNIXODBC_HOME=/usr #UNIXODBC_DATASOURCE=ICAT #ifeq ($(OS_platform), osx_platform) #NSL= #else #NSL=-lnsl #endif #ODBC_LIB_DIR = $(UNIXODBC_HOME)/lib #ODBC_HDR_DIR = $(UNIXODBC_HOME)/include #DBMS_LIB+= -L$(ODBC_LIB_DIR) -lodbc $(NSL) -lm #DBMS_INCLUDE+= -I$(ODBC_HDR_DIR) endif # # Misc options # # CCMALLOC - specify whether mem leak checking CCMALLOC should be run # CCMALLOC = 1 ifdef CCMALLOC CCMALLOC_DIR=/data/mwan/rods/ccmalloc/ccmalloc-0.4.0 endif # IRODS_FS - specify that irodsFuse should be built # The latest version is 26 for release 2.7. It default to 21 if not defined # IRODS_FS = 1 ifdef IRODS_FS fuseHomeDir=/home/mwan/adil/fuse-2.7.0 endif # PHP_LIB - specify whether php library will be loaded into irodsAgent. # Would like to use PHP as a micro-service language # PHP_LIB = 1 ifdef PHP_LIB PHP_LIB_DIR=/data/mwan/php/php-5.2.5x/libs endif # MSSO_STRUCT_FILE - specify whether the msso-based workflow will be loaded # into irodsAgent. MSSO_STRUCT_FILE = 1 # TAR_STRUCT_FILE - specify whether the tar structured file will be loaded # into irodsAgent. TAR_EXEC_PATH specifies the path of the tar executable # is located if the tar executable is to be used for tar operation. # Otherwise tarDir can be used to specify the directory path of libtar. # Both TAR_EXEC_PATH and tarDir should NOT be specified. By default, # TAR_EXEC_PATH is on and tarDir is off. # GNU_TAR -specifies whether the tar execuable is a GNU tar. The default # is it is a GNU tar # TAR_EXTENDED_HDR - specify whether the extended header format option (-E) # which allows individual file size larger than 8 Gb, is to be used. # The default is off since not all tar commands support this option. TAR_STRUCT_FILE = 1 ifdef TAR_STRUCT_FILE GNU_TAR=1 # TAR_EXTENDED_HDR = 1 ifeq ($(findstring solaris,$(OS_platform)), solaris) TAR_EXEC_PATH="`which gtar`" else ifeq ($(OS_platform), osx_platform) TAR_EXEC_PATH="`which tar`" else TAR_EXEC_PATH=/bin/tar endif endif # tarDir=/data/mwan/tar/libtar-1.2.11 endif # ZIP_EXEC_PATH and UNZIP_EXEC_PATH define the paths of zip/unzip executable. ZIP_EXEC_PATH=/usr/bin/zip UNZIP_EXEC_PATH=/usr/bin/unzip # # Grid Security Infrastructure # # Uncomment '# GSI_AUTH=1' and specify your GLOBUS_LOCATION and # GSI_INSTALL_TYPE (the examples of these below work at SDSC). # # Some versions/installations of Globus will use the system SSL and # Crypto libraries. If GSI_SSL and/or GSI_CRYPTO are set, the # Makefiles will use system libs instead of the Globus ones. # 'configure' will set these if the globus ssl and crypto libraries do # not exist in $(GLOBUS_LOCATION)/lib (setting GSI_SSL to ssl and # GSI_CRYPTO to crypto). # # # GSI_AUTH = 1 ifdef GSI_AUTH GLOBUS_LOCATION=/usr/local/apps/globus-4.0.1 GSI_INSTALL_TYPE=gcc32dbg GSI_SSL= GSI_CRYPTO= endif # RBUDP_TRANSFER - specify whether RBUDP file transfer mechanism will be # supported (iget/iget -U) RBUDP_TRANSFER = 1 # UNI_CODE - support UTF-8 on linux and UTF-16 on windows #UNI_CODE= # COMPAT_201 - The data structures of many APIs have been consolidated # after version 2.0.1. If this flag is set, the server API handle # will be made to handle the 2.0.1 client request in addition to the # new data structures. This flag is set by default COMPAT_201=1 # Kerberos authentication # KRB_AUTH = 1 #ifdef KRB_AUTH #KRB_LOCATION=/usr/kerberos #endif # Syslog logging # Uncomment this line to log into syslog instead of the usual # server/log/ log files. #IRODS_SYSLOG = 1 # HPSS - Define whether HPSS is supported on this server. HPSS_UNIX_PASSWD_AUTH # specifies whether the UNix password authentication should be used. # HPSS_KRB5_AUTH specifies whether the Kerberos keytab file should be used. # The default is using the UNIX keytab file. # HPSS=1 ifdef HPSS # HPSS_UNIX_PASSWD_AUTH=1 # HPSS_KRB5_AUTH=1 # HPSS7 - Defines whether the HPSS v7 library or later is used. The default # is HPSS v6 # HPSS7=1 # HPSS_LIB_DIR is the directory of the HPSS library and HPSS_HDR_DIR is the # directory of the HPSS header files. When building iRODS, be sure to add the # path defined by HPSS_LIB_DIR to the path in the LD_LIBRARY_PATH env variable. HPSS_LIB_DIR=/opt/hpss/lib HPSS_HDR_DIR=/opt/hpss/include ADDR_64BITS= endif # AMAZON_S3 - Define whether AMAZON S3 is supported on this server. # AMAZON_S3=1 ifdef AMAZON_S3 S3_LIB_DIR=/data1/mwan/s3/libs3-1.4/build/lib S3_HDR_DIR=/data1/mwan/s3/libs3-1.4/build/include endif # Extensible ICAT # See modules/extendedICAT/README.txt. Uncomment this line, and add # modules/extendedICAT/extendedICAT.h, to enable the extensible ICAT: # EXTENDED_ICAT = 1 # DDN_WOS - Define whether DDN's WOS driver is supported on this server. # WOS_DIR is the directory for the WOS library ($(WOS_DIR)/lib64) and # include files ($(WOS_DIR)/include). BOOST_DIR is the directory where # the BOOST directory is located. BOOST is required for compiling the # C++ WOS driver. # DDN_WOS=1 ifdef DDN_WOS WOS_DIR=/home/mwan/myapps/ddn/woscpp BOOST_DIR=/home/mwan/myapps/boost/boost_1_44_0 endif # RUN_SERVER_AS_ROOT - Defines whether the iRODS server contains code # that will allow the iRODS servers to switch between root and service # user permissions for specific operations. Even if set here, will only # be enabled if a) the server is started as root, and b) the environment # variable irodsServiceUser is set to the desired system user. # RUN_SERVER_AS_ROOT = 1 # USE_BOOST - specify whether the BOOST library should be used. BOOST_DIR is # the directory where the BOOST directory is located, which is normally # the .../iRODS/boost_irods directory. First run 'buildboost.sh' in the # iRODS directory to create boost_irods. # USE_BOOST=1 ifdef USE_BOOST ifndef BOOST_DIR #BOOST_DIR=/home/mwan/myapps/boost/install BOOST_DIR=/tbox/IRODS_BUILD/iRODS/boost_irods endif endif # USE_GCOV - specify whether to compile for gcov test ocverage # USE_GCOV = 1 # OS_AUTH - build in support for "OS level" authentication. This form # of authentication uses a shared secret and the genOSAuth command to # generate a credential that the user presents to the iRODS server. # You can use this instead of using password authentication. # OS_AUTH = 1 ifdef OS_AUTH OS_AUTH_KEYFILE = /etc/irods.key # Set OS_AUTH_CMD if you don't want to look for genOSAuth # in the PATH. #OS_AUTH_CMD = /usr/lib/irods/genOSAuth # Some environments don't have a uniform username/uid # space between the IES and the clients. Uncomment # OS_AUTH_NO_UID if this is the case, so the uid will # not be used when generating the authenticator. # OS_AUTH_NO_UID = 1 endif # PAM_AUTH - build in support for PAM/LDAP authentication. This form # of authentication uses the user's system password and authenticates # via the Pluggable Authentication System on the server side. The # password is securely transferred to the server (encrypted) and subsequent # authentications makes use of a new irods-pam password for use only # in iRODS. # PAM_AUTH = 1 ifdef PAM_AUTH #PAM_AUTH_CHECK_PROG=../auth/PamAuthCheck endif # USE_SSL - build in support for using SSL over the client/server # communication socket. This support consists of two iRODS API calls # that ask the server to "turn on" and "turn off" the SSL protocol # on a given connection. Right now this is only used for the PAM_AUTH # mode, so must be turned on for the PAM_AUTH support to function properly. # USE_SSL = 1 # NETCDF_API - specify whether to build iRODS with the NETCDF API. This # option requires the installation of the NETCDF C library and header files. # NETCDF4_API - specify whether the NETCDF library supports NETCDF4 APIs - # built with --enable-netcdf-4. # NETCDF_DIR - the install directory of NETCDF. # NETCDF_CLIENT - build only the irods client with the NETCDF API. This # option does not require the installation of the NETCDF C library nor # header files. NETCDF_API must be off with is option. # LIB_CF - specify whether higher level libCF is present. libCF, uses the # netCDF API to aid in the creation, processing and sharing of scientific # data files which conform to the Climate and Forecast (CF) conventions # Currently, one libCF subsetting API - nccf_get_vara has been inplemented # as an iRods API (rcNccfGetVara). If LIB_CF is not set, only the low # level NETCDF APIs are present. LIB_CF_INC_DIR and LIB_CF_LIB_DIR defines # the path for the include directory and lib directory, respectively, for # libcf. # NETCDF_API=1 # NETCDF4_API=1 # NETCDF_CLIENT=1 # LIB_CF=1 ifdef NETCDF4_API NETCDF_API=1 endif ifdef NETCDF_API NETCDF_CLIENT=1 NETCDF_DIR=/usr/local ifdef LIB_CF LIB_CF_INC_DIR=/usr/local/include LIB_CF_LIB_DIR=/usr/local/lib endif endif # PYDAP - Define whether PYDAP driver is supported on this server. # NETCDF_API must be enabled if PYDAP is enabled. # PYDAP=1 # TDS - Define whether the TDS (Thredds Data Server) driver is supported on # this server. NETCDF_API must be enabled and libxml2 must be installed # if TDS is enabled. LIB_XML2_INC_DIR and LIB_XML2_LIB_DIR defines # the path for the include directory and lib directory, respectively, for # libxml2. # TDS=1 ifdef TDS LIB_XML2_INC_DIR=/usr/local/include LIB_XML2_LIB_DIR=/usr/local/lib endif # ERDDAP - Define whether the ERDDAP driver is supported on # this server. NETCDF_API must be enabled and JANSSON library must be installed # if ERDDAP is enabled. LIB_JANSSON_INC_DIR and LIB_JANSSON_LIB_DIR defines # the path for the include directory and lib directory, respectively, for # libjansson. # ERDDAP=1 ifdef ERDDAP LIB_JANSSON_INC_DIR=/usr/local/include LIB_JANSSON_LIB_DIR=/usr/local/lib endif # FILESYSTEM_META - turn on functionality that collects the # filesystem meta-data (i.e. 'stat' information) from files # and directories added to iRODS via iput and ireg. Only supported # on UNIX/Linux-type systems. # FILESYSTEM_META = 1 # DIRECT_ACCESS_VAULT - build in support for a resource type that # will allow users to directly access files in the vault of this # type of resource. Intended for use in environments where there is a # need for an "iRODS overlay" of an existing high-performance # filesystem (e.g. a parallel file system NAS). It requires that the # RUN_SERVER_AS_ROOT and FILESYSTEM_META features are turned on. # DIRECT_ACCESS_VAULT = 1 # Override default paths for config files, logs, state and server commands. # # location of irodsHost, server.config, reConfigs, etc #DEF_CONFIG_DIR=../config # location of packedRei and lockFileDir #DEF_STATE_DIR=../config # location of the log files #DEF_LOG_DIR=../log # location of commands for rsExecCmd #CMD_DIR=cmd # OOI_CI - specify whether to compile the OOI CI modules # OOI_CI=1 # STORAGE_ADMIN_ROLE - turn on support for the 'storageadmin' user type. # In this mode, you can run an iRODS server as a non-privileged user # so the data server doesn't need rodsadmin credentials. # STORAGE_ADMIN_ROLE = 1