#! /bin/sh # # A (not so) simple configure script. # # Authors: Christian Holm Christensen and Fons Rademakers. # # To help with debugging the script, some comments are preprended with # 3 '#' echo and 3 '%' - replace that pattern with echo and 3 '%' to # get printouts. When done replace the pattern echo and 3 '%' with the # original pattern of 3 '#' echo and 3 '%'. Emacs command M-C-% does # this easily. # ###################################################################### # ### echo %%% Some global variables # found_lib=no found_dir=no found_hdr=no found_ext= show_pkglist=no fail_on_missing=no noact="no" nohowto="no" logfile=config.log altcc= altcxx= altf77= altld= host= deprecated_options=" \ enable_mathcore \ enable_cern \ enable_editline \ " options=" \ enable_afdsmgrd \ enable_afs \ enable_alien \ enable_alloc \ enable_asimage \ enable_astiff \ enable_bonjour \ enable_builtin_afterimage \ enable_builtin_ftgl \ enable_builtin_freetype \ enable_builtin_glew \ enable_builtin_pcre \ enable_builtin_zlib \ enable_builtin_lzma \ enable_cxx11 \ enable_castor \ enable_chirp \ enable_cintex \ enable_cling \ enable_cocoa \ enable_dcache \ enable_explicitlink \ enable_fink \ enable_fftw3 \ enable_fitsio \ enable_gviz \ enable_gdml \ enable_genvector \ enable_gfal \ enable_glite \ enable_globus \ enable_gsl_shared \ enable_hdfs \ enable_krb5 \ enable_ldap \ enable_mathmore \ enable_memstat \ enable_minuit2 \ enable_monalisa \ enable_mysql \ enable_odbc \ enable_opengl \ enable_oracle \ enable_pgsql \ enable_pythia6 \ enable_pythia8 \ enable_python \ enable_qt \ enable_qtgsi \ enable_reflex \ enable_roofit \ enable_ruby \ enable_rfio \ enable_rpath \ enable_sapdb \ enable_shadowpw \ enable_shared \ enable_soversion \ enable_srp \ enable_ssl \ enable_table \ enable_tmva \ enable_unuran \ enable_winrtdebug \ enable_x11 \ enable_xft \ enable_xml \ enable_xrootd \ " ENABLEALL="no" DEFAULTENABLE="yes" for flag in "$@"; do case $flag in --all) ENABLEALL="yes" break ;; --gminimal) DEFAULTENABLE="no" MINIMALENABLE="enable_x11" break ;; --minimal) DEFAULTENABLE="no" MINIMALENABLE="" break ;; esac done # # This sets all options to "yes" unless --minimal is specified. # We turn off those we don't want on per default explictly afterwards. # for c in $options $deprecated_options; do case ${c} in ${MINIMALENABLE}) eval ${c}="yes" ;; enable_shared) eval ${c}="yes" ;; *) eval ${c}="${DEFAULTENABLE}" ;; esac done for c in $options ; do eval ${c}_explicit="" ; done enable_cxx11=no enable_cling=no enable_cocoa=no enable_afs=no enable_alloc=no enable_gdml=no enable_globus=no enable_explicitlink=no enable_gsl_shared=no enable_qt=no enable_qtgsi=no enable_roofit=no enable_minuit2=no enable_rpath=no enable_ruby=no enable_shadowpw= enable_soversion=no enable_table=no enable_thread=yes # cannot be disabled (not in above options list) enable_unuran=no enable_winrtdebug= enable_builtin_freetype=no enable_builtin_ftgl=no enable_builtin_glew=no enable_builtin_pcre=no enable_builtin_zlib=no enable_builtin_lzma=no enable_afdsmgrd=no if test "x$ENABLEALL" = "xyes"; then enable_gdml=yes enable_qt=yes enable_qtgsi=yes enable_roofit=yes enable_minuit2=yes enable_ruby=yes enable_table=yes enable_unuran=yes fi # Remove old log file rm -f $logfile # # ./configure arguments and defaults set via supported env vars # envvars=" THREAD \ ZLIB \ LZMA \ OPENGL \ MYSQL \ ORACLE \ PGSQL \ QTDIR \ SAPDB \ RFIO \ CASTOR \ GFAL \ GSL \ HDFS \ PYTHIA6 \ PYTHIA8 \ FFTW3 \ CFITSIO \ GVIZ \ PYTHONDIR \ DCACHE \ CHIRP \ DNSSD \ AVAHI \ ALIEN \ ASIMAGE \ LDAP \ GLOBUS_LOCATION \ GLITE \ MEMSTAT \ MONALISA \ SRP \ SSL \ AFS \ ROOFIT \ MINUIT2 \ TABLE \ XMLDIR \ ROOTDICTTYPE \ " configenvvars= for c in $envvars ; do cc=`eval echo "$"$c | sed 's,\\\,\\\\\\\,g'` if test ! "x$cc" = "x" ; then if test ! "x$configenvvars" = "x" ; then configenvvars="$configenvvars $c=$cc" else configenvvars="$c=$cc" fi fi done configargs="$*" # don't write --nohowto to config.h configargs=`echo $configargs | sed 's, *--nohowto,,g'` configoptions= if test ! "x$configenvvars" = "x" ; then configoptions=$configenvvars fi if test ! "x$configargs" = "x" ; then if test ! "x$configoptions" = "x" ; then configoptions="$configoptions $configargs" else configoptions=$configargs fi fi configoptions=`echo $configoptions | sed 's,\\\,\\\\\\\,g'` ###################################################################### # ### echo %%% Some common functions # #_____________________________________________________________________ message() { # Write a simple message to std out if test $# -lt 1 ; then echo "message: Too few arguments" return 1 fi echo $ac_n "$* ... $ac_c" logmsg "$*" } #_____________________________________________________________________ logmsg() { # Write a simple message to std out if test $# -lt 1 ; then echo "logmsg: Too few arguments" return 1 fi if test "x$1" = "x-n"; then shift echo -n "$*" >> $logfile else echo "$*" >> $logfile fi } #_____________________________________________________________________ result() { echo "$*" logmsg "Result: $*" } #_____________________________________________________________________ checking_msg() { # Write a simple "checking" message to std out. if test $# -lt 1 ; then echo "checking_msg: Too few arguments" return 1 fi echo $ac_n "Checking for$ac_c" logmsg $ac_n "Checking for$ac_c" while test $# -gt 1 ; do echo $ac_n " $1,$ac_c" logmsg $ac_n " $1,$ac_c" shift if test $# -eq 1 ; then echo $ac_n " or$ac_c" logmsg $ac_n " or$ac_c" fi done echo $ac_n " $1 ... $ac_c" logmsg " $1 ... " } #_____________________________________________________________________ check_libpic() { # This function will try to find out if an archive library [$1] # contains relocatable code. Currently works only for linux. # The result of the check is stored in is_libpic, 1 if true, # 0 otherwise, which should be immediately copied, since the variable # will be overwritten at next invocation of this function. is_libpic=1 # Assert that we got enough arguments if test $# -ne 1 ; then echo "check_libpic: not 1 argument" return 1 fi case $platform in linux) ;; *) return 0; ;; esac # Save arguments in logical names chklibpic=$1 if [ "x`basename $chklibpic .a`" != "x`basename $chklibpic`" ]; then # we have an archive .a file logmsg "Checking if $chklibpic contains relocatable code" logmsg " objdump -r $chklibpic | grep -v ' .debug_' | grep 'R_X86_64_32'" objdump -r $chklibpic | grep -v ' .debug_' | grep 'R_X86_64_32' > /dev/null 2>& 1 ret=$? logmsg " result: $ret" if test $ret -eq 0 ; then is_libpic=0 logmsg " is not a relocatable library" fi fi } #_____________________________________________________________________ check_libcompat() { # This function will try to find out if a library [$1] contains # compatible 64 bit or 32 bit code matching the selected architecture. # Currently only MacOS X supports universal libs. # The result of the check is stored in is_libcompat, 1 if true, # 0 otherwise, which should be immediately copied, since the variable # will be overwritten at next invocation of this function. is_libcompat=0 is_libnotcompat=0 ret=0 # Assert that we got enough arguments if test $# -ne 1 ; then echo "check_libcompat: not 1 argument" return 1 fi # Save arguments in logical names chklibcompat=$1 logmsg "Checking if $chklibcompat contains compatible code" case $arch in macosx) logmsg " lipo -info $chklibcompat | grep ' i386'" if lipo -info $chklibcompat | grep ' i386' > /dev/null 2>& 1 ; then ret=1 fi ;; macosx64) logmsg " lipo -info $chklibcompat | grep ' x86_64'" if lipo -info $chklibcompat | grep ' x86_64' > /dev/null 2>& 1 ; then ret=1 fi ;; esac logmsg " result: $ret" if test $ret -eq 1 ; then is_libcompat=1 logmsg " is a compatible library" else is_libnotcompat=1 logmsg " is a not-compatible library" fi } #_____________________________________________________________________ check_lib64() { # This function will try to find out if a library [$1] contains 64 bit # or 32 bit code. Currently works only for linux and solaris. # The result of the check is stored in is_lib64, 1 if true, # 0 otherwise, which should be immediately copied, since the variable # will be overwritten at next invocation of this function. is_lib64=0 ret=0 # Assert that we got enough arguments if test $# -ne 1 ; then echo "check_lib64: not 1 argument" return 1 fi filearg= case $platform in linux) filearg="-L" ;; solaris) ;; *) return 1;; esac # Save arguments in logical names chklib64=$1 logmsg "Checking if $chklib64 is a 64-bit library" if [ "x`basename $chklib64 .a`" != "x`basename $chklib64`" ]; then # we have an archive .a file if [ "x$platform" = "xlinux" ]; then logmsg " objdump -a $chklib64 | grep 'x86-64'" if objdump -a $chklib64 | grep 'x86-64' > /dev/null 2>& 1 ; then ret=1 fi fi if [ "x$platform" = "xsolaris" ]; then chklib64file=`ar t $chklib64 | awk '{if (NR == 2) print $1}'` logmsg " ar x $chklib64 $chklib64file" ar x $chklib64 $chklib64file logmsg " file $filearg $chklib64file | grep '64-bit'" if file $filearg $chklib64file | grep '64-bit' > /dev/null 2>& 1 ; then ret=1 fi rm -f $chklib64file fi else if file $filearg $chklib64 | grep 'ASCII' > /dev/null 2>& 1 ; then check_link $chklib64 ret=$link_result else logmsg " file $filearg $chklib64 | grep '64-bit'" if file $filearg $chklib64 | grep '64-bit' > /dev/null 2>& 1 ; then ret=1 fi fi fi logmsg " result: $ret" if test $ret -eq 1 ; then is_lib64=1 logmsg " is a 64bit library" fi } #_____________________________________________________________________ check_library() { # This function will try to locate a library [$1] in the specific # directory [$3] or in a default path [$*]. If the second argument # [$2] is not "no" or "staticonly", then shared libraries are favoured. # The result of the search is stored in found_lib and found_dir, # which should be immediately copied, since the variables value will # be overwritten at next invocation of this function. # Assert that we got enough arguments if test $# -lt 4 ; then echo "check_library: Too few arguments" return 1 fi # Save arguments in local names lib=$1 ; shift shared=$1 ; shift libdirl=$1 ; shift libdirs="$*" if test ! "x$iossdk" = "x" ; then sdklibs="" for i in $libdirs; do #if test $i = "/usr/lib"; then sdklibs="$sdklibs ${iossdk}${i}" #else # sdklibs="$sdklibs $i" #fi done libdirs="$sdklibs" fi # Write a message checking_msg $lib # check if we got a specific argument as to where the library # is to be found if test ! "x$libdirl" = "x" ; then libdirs=$libdirl fi found_lib=no found_dir=no found_ext= # Make list of libraries to search for. The .lib extension is for # Windoze - note $shared is always "no" on windoze, since we need # the .lib export library to link. libs="" for i in $lib ; do for ext in .a .lib "" ; do # lib without extension for MacOS X libs="$libs $i$ext" done done slibs="" for i in $lib ; do for ext in .so .sl .dylib .dll.a ; do # .dll.a for cygwin gcc slibs="$slibs $i$ext" done done if test "x$shared" = "xno" ; then libs="$libs $slibs" elif test "x$shared" = "xstaticonly" ; then libs="$libs" else libs="$slibs $libs" fi logmsg "libraries to check for: $libs" # Loop over the list of possible directories, and see if we can # find any of the library files as determind above. for i in $libdirs ; do # look first in the lib32 directories if test "x$checklib32" = "xyes" ; then i32=`echo $i | sed -e 's|lib$|lib32|' -e 's|lib/|lib32/|'` #i="$i32 $i" i="$i32" fi # look first in the lib64 directories if test "x$checklinux64" = "xyes" ; then i64=`echo $i | sed -e 's|lib$|lib64|' -e 's|lib/|lib64/|'` i="$i64 $i" fi # look first in the DEB_HOST_MULTIARCH directories if test "x$debmultiarch" != "x" ; then i64=`echo $i | sed "s|\(lib\)$|\1/$debmultiarch|"` i="$i64 $i" fi # look only in the lib64 directories if test "x$checkonlylib64" = "xyes" ; then i64=`echo $i | sed -e 's|lib$|lib64|' -e 's|lib/|lib64/|'` i="$i64" fi # look only in the hpux64 directories if test "x$checkhpux64" = "xyes" ; then i64=`echo $i | sed 's|\(lib\)|\1/hpux64|'` i="$i64" fi # look first in the amd64 directories if test "x$checksolaris64" = "xyes" ; then i64=`echo $i | sed 's|\(lib\)|\1/amd64|'` i="$i64 $i" fi logmsg " Checking in directories $i for $libs" for l in $i ; do l=`echo $l | sed 's,^//,/,'` if test ! -d $l ; then continue fi for j in ${libs} ; do logmsg " Checking for library $j in directory $l" # if we found the file (it's readable by user), we set the # logical variables and are on our way, otherwise we continue liblist=`echo $l/$j` # expands wildcard in $l/$j for n in ${liblist} ; do logmsg " Checking $n" if test -f $n ; then logmsg " Found file $n" if test "x$checklib64" = "xyes" ; then check_lib64 $n if test $is_lib64 -eq 1 ; then found_dir=$l found_lib=$j break 4 fi else if test "x$checklibcompat" = "xyes" ; then check_libcompat $n if test $is_libcompat -eq 0 ; then break 4 fi fi found_dir=$l found_lib=$j if test "x$arch" = "xlinux"; then check_lib64 $n else is_lib64=0 fi if test $is_lib64 -eq 1 ; then found_dir=no found_lib=no else # skip cygwin libraries when in pure Win32 mode if test "x$platform" = "xwin32"; then case $found_dir in /lib|/lib/*|/usr/*) found_dir=no ;; *) break 4;; esac else break 4 fi fi fi else logmsg " $j not found in $l" fi done done done done echo $found_dir unset libs unset libdirs if test "x$found_dir" = "xno" || test "x$found_lib" = "xno" ; then found_dir="" found_lib="" found_raw_lib="" logmsg " library not found" else found_ext=`echo $found_lib | sed 's|^lib\(.*\)\.\(.*\)|\2|'` flib="" maclib="" for i in $lib ; do for ext in .a .lib "" ; do # lib without extension for MacOS X if test "x$found_lib" = "x$i$ext" ; then flib=$i$ext if test "x$ext" = "x" ; then maclib="yes" fi break 2 fi done done if (test "x$found_lib" = "x$flib" && test "x$shared" = "xno") || \ test "x$maclib" = "xyes" ; then found_raw_lib=${found_lib} found_lib=${found_dir}/${found_lib} found_raw_dir=${found_dir} found_dir="" else found_raw_lib=${found_lib} if test ! "x$shared" = "xstaticonly" ; then found_lib=`echo $found_lib | sed 's|^lib\(.*\)\..*|-l\1|'` fi found_raw_dir=${found_dir} if test ! "x$shared" = "xstaticonly" ; then found_dir=-L${found_dir} fi # Avoid inclusion of /usr/lib, which is always included anyway if test "x$found_dir" = "x-L/usr/lib" || \ test "x$found_dir" = "x-L/usr/lib32" || \ test "x$found_dir" = "x-L/usr/lib64" ; then found_dir="" fi if test "x$debmultiarch" != "x" ; then if test "x$found_dir" = "x-L/usr/lib/$debmultiarch" ; then found_dir="" fi fi if test "x$checksolaris64" = "xyes" ; then if test "x$found_dir" = "x-L/usr/lib/amd64" || \ test "x$found_dir" = "x-L/usr/lib/64" ; then found_dir="" fi fi if test "x$checkhpux64" = "xyes" ; then if test "x$found_dir" = "x-L/usr/lib/hpux64" ; then found_dir="" fi fi fi # Correct path for win32 if test "x$platform" = "xwin32"; then if test ! "x$found_lib" = "x" ; then found_lib=`cygpath -m $found_lib` fi if test ! "x$found_dir" = "x" ; then found_dir=`cygpath -m $found_dir` fi fi fi unset shared unset slibs unset lib unset flib unset maclib unset libdirl } #_____________________________________________________________________ check_header() { # This function will try to locate a header [$1] in the specific # directory [$2] or in a default path [$*]. # The result of the search is stored in found_hdr and found_dir, # which should be immediately copied, since the variables value will # be overwritten at next invocation of this function. # Assert that we got enough arguments if test $# -lt 3 ; then echo "check_header: Too few arguments" return 1 fi # Save arguments in logical names hdrs=$1 ; shift hdrdir=$1 ; shift hdrdirs="$*" if test ! "x$iossdk" = "x" ; then sdkhdrs="" for i in $hdrdirs; do #if test $i = "/usr/include"; then sdkhdrs="$sdkhdrs ${iossdk}${i}" #else # sdkhdrs="$sdkhdrs $i" #fi done hdrdirs="$sdkhdrs" fi # Write a message checking_msg $hdrs # Check if we got a specific argument as to where the library # is to be found if test ! "x$hdrdir" = "x" ; then hdrdirs=$hdrdir fi found_hdr=no found_dir=no # Loop over the list of possible directories, and see if we can # find any of the library files as determind above. for i in $hdrdirs; do logmsg " Checking in directory $i" for j in ${hdrs} ; do logmsg " Checking for $j in directory $i" # if we found the file (it's readable by user), we set the # logical variables and are on our way, otherwise we continue if test -r $i/$j ; then logmsg " $i/$j is read-able" found_dir=$i found_hdr=$j # skip cygwin headers when in pure Win32 mode if test "x$platform" = "xwin32"; then case $found_dir in /usr/*) found_dir="no" ;; *) break 2;; esac else break 2 fi fi done done echo $found_dir if test "x$found_hdr" = "xno" || test "x$found_dir" = "xno" ; then found_hdr="" found_dir="" fi # Avoid inclusion of /usr/include, which is always included anyway #if test "x$found_dir" = "x/usr/include" ; then # found_dir="include" #fi # Correct path for win32 if test "x$platform" = "xwin32"; then if test ! "x$found_hdr" = "x" ; then found_hdr=`cygpath -m $found_hdr` fi if test ! "x$found_dir" = "x" ; then found_dir=`cygpath -m $found_dir` fi fi unset hdrs unset hdrdirs unset hdrdir } #_____________________________________________________________________ check_link() { # This function will try to link a specific library [$1] in an # optional directory [$2] and test, optionally, for a specified # symbol [$3]. # The result of the check is stored in link_result, 1 if true, # 0 otherwise, which should be immediately copied, since the variable # will be overwritten at next invocation of this function. # Assert that we got enough arguments if test $# -lt 1 ; then echo "check_link: need at least one argument" link_result=0 return 1 fi # save arguments in logical names linklib="$1"; shift linkdir="" if test $# -ge 1 ; then linkdir="$1"; shift fi linksymbol="" if test $# -ge 1 ; then linksymbol="$1" fi if test "x$linksymbol" = "x" ; then if test "x$linkdir" = "x" ; then logmsg " trying to link against $linklib" else logmsg " trying to link against $linkdir $linklib" fi cat < conftest.mk include ${ac_srcdir}/config/Makefile.${arch} CC = ${altcc} CXX = ${altcxx} LD = ${altld} conftest: conftest.c \$(CC) \$(CFLAGS) \$(LDFLAGS) \$< -o \$@ $linkdir $linklib conftest.c: echo "int main() { return 0; }" > \$@ EOF else if test "x$linkdir" = "x" ; then logmsg " trying to resolve symbol $linksymbol in $linklib" else logmsg " trying to resolve symbol $linksymbol in $linkdir $linklib" fi cat < conftest.mk include ${ac_srcdir}/config/Makefile.${arch} CC = ${altcc} CXX = ${altcxx} LD = ${altld} conftest:conftest.c \$(CC) \$(CFLAGS) \$(LDFLAGS) \$< -o \$@ $linkdir $linklib conftest.c: echo "extern int $linksymbol (); " > \$@ echo "int main() { $linksymbol (); return 0; }" >> \$@ EOF fi $gnumake -f conftest.mk >> $logfile 2>&1 if test $? -eq 0 ; then link_result=1 logmsg " Link OK" else link_result=0 logmsg " Failed code was" cat conftest.mk >> $logfile fi rm -rf conftest.c conftest.mk conftest conftest.dSYM unset linklib unset linkdir unset linksymbol } #_____________________________________________________________________ check_cxxopt() { # This function will try to compile with a specific cxx compiler # option [$1]. The result of the check is stored in cxxopt_result, # 1 if true, 0 otherwise, which should be immediately copied, # since the variable will be overwritten at next invocation # of this function. # Assert that we got enough arguments if test $# -lt 1 ; then echo "check_cxxopt: need at least one argument" cxxopt_result=0 return 1 fi # save arguments in logical names cxxopt="$1"; shift logmsg " trying to compile with option $cxxopt" cat < conftest.mk include ${ac_srcdir}/config/Makefile.${arch} CC = ${altcc} CXX = ${altcxx} LD = ${altld} conftest: conftest.cxx \$(CXX) \$(CFLAGS) $cxxopt \$(LDFLAGS) \$< -o \$@ conftest.cxx: echo "int main() { return 0; }" > \$@ EOF $gnumake -f conftest.mk >> $logfile 2>&1 if test $? -eq 0 ; then cxxopt_result=1 logmsg " Compilation OK" else cxxopt_result=0 logmsg " Failed code was" cat conftest.mk >> $logfile fi rm -rf conftest.cxx conftest.mk conftest conftest.dSYM unset cxxopt } #_____________________________________________________________________ check_symbol() { # This function will try to locate a symbol [$1] in a specific # library [$2] and in a given directory [$3]. # The result of the check is stored in found_symbol, 1 if true, # 0 otherwise, which should be immediately copied, since the variable # will be overwritten at next invocation of this function. # Assert that we got enough arguments if test $# -ne 3 ; then echo "check_symbol: not 3 arguments" found_symbol=0 return 1 fi # Save arguments in logical names symbol=$1 ; shift symbollib=$1 ; shift symboldir=$1 if test "x$symbollib" = "x" ; then found_symbol=0 unset symbol unset symbollib unset symboldir return 1 fi symbollib=`echo $symbollib | sed -e 's/^-l/lib/'` if test ! "x$symboldir" = "x" ; then symboldir=`echo $symboldir | sed -e 's/^-L//'` fi # Check if we got a specific argument as to where the library # is to be found symbolfile=$symbollib exts=".so .lib .dylib" if test ! "x$shared" = "xno" ; then exts="$exts .a" else exts=".a $exts" fi usrlib="/usr/lib" # look first in the lib32 directories if test "x$checklib32" = "xyes" ; then usrlib="/usr/lib32 $usrlib" fi # look first in the lib64 directories if test "x$checklinux64" = "xyes" ; then usrlib="/usr/lib64 $usrlib" fi # look first in the DEB_HOST_MULTIARCH directories if test "x$debmultiarch" != "x" ; then usrlib="/usr/lib/$debmultiarch $usrlib" fi # look only in the lib64 directories if test "x$checkonlylib64" = "xyes" ; then usrlib="/usr/lib64" fi # look only in the hpux64 directories if test "x$checkhpux64" = "xyes" ; then usrlib="/usr/lib/hpux64" fi # look first in the amd64 directories if test "x$checksolaris64" = "xyes" ; then usrlib="/usr/lib/amd64 $usrlib" fi for d in "$symboldir" $usrlib ; do logmsg " Checking in $d" if test ! -r $d/$symbollib ; then logmsg " $d/$symbollib not readable" for i in $exts ; do logmsg " Checking extension $i with $d/$symbollib" if test -r $d/$symbollib$i ; then logmsg " $d/$symbollib$i readable" symbolfile=$d/$symbollib$i break 2 fi done else logmsg "$d/$symbollib readable" symbolfile=$d/$symbollib break fi done if test "x$symbolfile" = "x" || test ! -r $symbolfile ; then found_symbol=0 logmsg " Symbol not found" unset symbol unset symbollib unset symboldir return 1 fi checking_msg "$symbol in $symbolfile" nm $symbolfile 2>&1 | grep $symbol > /dev/null 2>&1 if test $? -eq 0 ; then found_symbol=1 logmsg " Symbol found" else nm $symbolfile 2>&1 | grep "no symbols" > /dev/null 2>&1 if test $? -eq 0 ; then logmsg " $symbolfile is stripped, trying to link" # stripped library - only safe test is to link against the library check_link $symbolfile "" $symbol found_symbol=$link_result else found_symbol=0 fi fi if test $found_symbol -eq 1 ; then result "ok" else result "no" fi unset symbol unset symbollib unset symboldir } #_____________________________________________________________________ check_comp() { # This function will try to locate the default or alt compiler # type [$1] in the PATH. # The result of the check is stored in found_comp, 1 if true, # 0 otherwise, which should be immediately copied, since the variable # will be overwritten at next invocation of this function. # Assert that we got enough arguments if test $# -ne 1 ; then echo "check_comp: not 1 argument" found_comp=0 return 1 fi comptype="$1" nocomp="" if test "x$comptype" = "xLD" ; then message "Checking for ${compmsgextra}linker (LD)" else message "Checking for ${compmsgextra}$comptype compiler" fi found_comp=0 case $comptype in C) if test "x$altcc" = "x" ; then if `$gnumake -f ${ac_srcdir}/config/Makefile.$arch ROOT_SRCDIR=${ac_srcdir} CONFIGURE=yes showcc > /dev/null 2>&1` ; then altcc=`$gnumake -s -f ${ac_srcdir}/config/Makefile.$arch ROOT_SRCDIR=${ac_srcdir} CONFIGURE=yes showcc` else altcc=`grep '^CC ' ${ac_srcdir}/config/Makefile.$arch | awk '{ if (NF==3) {print $3; exit 0} }'` fi if test "x$arch" = "xwin32" ; then altccorg="cl" altcctmp="$altcc" altcc="$altccorg" fi fi altcc1=`echo "$altcc" | awk '{print $1}'` if `$cwhich $altcc1 > /dev/null 2>&1` ; then found_comp=1 if test ! "x$altcctmp" = "x" ; then altcc="$altcctmp" fi result "$altcc" else nocomp="$altcc" fi ;; C++) if test "x$altcxx" = "x" ; then if `$gnumake -f ${ac_srcdir}/config/Makefile.$arch ROOT_SRCDIR=${ac_srcdir} CONFIGURE=yes showcxx > /dev/null 2>&1` ; then altcxx=`$gnumake -s -f ${ac_srcdir}/config/Makefile.$arch ROOT_SRCDIR=${ac_srcdir} CONFIGURE=yes showcxx` else altcxx=`grep '^CXX ' ${ac_srcdir}/config/Makefile.$arch | awk '{ if (NF==3) {print $3; exit 0} }'` fi if test "x$arch" = "xwin32" ; then altcxxorg="cl" altcxxtmp="$altcxx" altcxx="$altcxxorg" fi fi altcxx1=`echo "$altcxx" | awk '{print $1}'` if `$cwhich $altcxx1 > /dev/null 2>&1` ; then found_comp=1 if test ! "x$altcxxtmp" = "x" ; then altcxx="$altcxxtmp" fi result "$altcxx" else nocomp="$altcxx" fi ;; LD) if test "x$altld" = "x" ; then if `$gnumake -f ${ac_srcdir}/config/Makefile.$arch ROOT_SRCDIR=${ac_srcdir} CONFIGURE=yes showld > /dev/null 2>&1` ; then altld=`$gnumake -s -f ${ac_srcdir}/config/Makefile.$arch ROOT_SRCDIR=${ac_srcdir} CONFIGURE=yes showld` else altld=`grep '^LD ' ${ac_srcdir}/config/Makefile.$arch | awk '{ if (NF==3) {print $3; exit 0} }'` fi if test "x$arch" = "xwin32" ; then altldorg="link" altldtmp="$altld" altld="$altldorg" fi if test "x$arch" = "xwin32gcc" ; then altldorg="g++" altldtmp="$altld" altld="$altldorg" fi fi altld1=`echo "$altld" | awk '{print $1}'` if `$cwhich $altld1 > /dev/null 2>&1` ; then found_comp=1 if test ! "x$altldtmp" = "x" ; then altld="$altldtmp" fi result "$altld" else nocomp="$altld" altldorg="" fi ;; F77) if test "x$altf77" = "x" ; then if `$gnumake -f ${ac_srcdir}/config/Makefile.$arch ROOT_SRCDIR=${ac_srcdir} CONFIGURE=yes showf77 > /dev/null 2>&1` ; then altf77=`$gnumake -s -f ${ac_srcdir}/config/Makefile.$arch ROOT_SRCDIR=${ac_srcdir} CONFIGURE=yes showf77` else altf77=`grep '^F77 ' ${ac_srcdir}/config/Makefile.$arch | awk '{ if (NF==3) {print $3; exit 0} }'` fi if test "x$arch" = "xwin32" ; then altf77org="fl32" altf77tmp="$altf77" altf77="$altf77org" fi fi altf771=`echo "$altf77" | awk '{print $1}'` if `$cwhich $altf771 > /dev/null 2>&1` ; then found_comp=1 if test ! "x$altf77tmp" = "x" ; then altf77="$altf77tmp" fi result "$altf77" else nocomp="$altf77" altf77org="" fi ;; esac if test $found_comp -eq 0 ; then result "no $comptype compiler $nocomp found" fi } #_____________________________________________________________________ check_explicit() { feat=$1 ; shift expl=$1 ; shift emsg=$1 ; shift if test "x$fail_on_missing" = "xno" ; then return 0 ; fi if test ! "x$expl" = "xyes" ; then return 0 ; fi if test ! "x$feat" = "xyes" ; then result $emsg exit 1 fi } #_____________________________________________________________________ guess_architecture() { # Try to guess the architecture of the host system # Note, that there's no attempt at guessing the compiler. # The `native' compiler is used in all cases. # If a user really want a specifific compiler, s/he better use the # first argument to do so. arch=`uname -s | tr '[A-Z]' '[a-z]'` chip=`uname -m | tr '[A-Z]' '[a-z]'` rele=`uname -r` logmsg "arch=$arch" logmsg "chip=$chip" logmsg "rele=$rele" case "$arch:$chip:$rele" in aix*) arch=aix5 ;; osf1*:alpha:*) arch=alphacxx6 ;; freebsd*:*:[789]*) arch=freebsd7 ;; freebsd*:*:6*) arch=freebsd5 ;; freebsd*:*:5*) arch=freebsd5 ;; freebsd*:*:4*) arch=freebsd4 ;; freebsd*:*:*) arch=freebsd ;; hp-ux:ia64:*) arch=hpuxia64acc ;; hp-ux:*:*) arch=hpuxacc ;; hurd*:*:*) arch=hurddeb ;; linux:ia64:*) arch=linuxia64gcc ;; linux:x86_64:*) arch=linuxx8664gcc ;; linux:alpha:*) arch=linuxalphagcc ;; linux:arm*:*) arch=linuxarm ;; linux:hppa*:*) arch=linux ;; linux:mips:*) arch=linuxmips ;; linux:sparc*:*) arch=linux ;; linux:parisc*:*) arch=linuxhppa ;; linux:ppc64*:*) arch=linuxppc64gcc ;; linux:ppc*:*) arch=linuxppcgcc ;; linux:i*86:*) arch=linux ;; linux:s39*:*) arch=linux ;; openbsd*:*:*) arch=openbsd ;; lynx:*:*) arch=lynxos ;; darwin:power*:*) arch=macosx ;; darwin:*86*:*) arch=macosx ;; irix*:sgi*:*) arch=sgicc ;; sunos:sun*:6*) arch=solarisCC5 ;; sunos:sun*:5*) arch=solarisCC5 ;; sunos:sun*:4*) arch=solaris ;; sunos:i86pc:5*) arch=solarisCC5 ;; cygwin_*:*86:*) arch=win32 ;; cygwin_*:pentium:*) arch=win32 ;; cygwin_*:ia64) arch=win32 ;; mingw32_*:*86:*) arch=win32 ;; *) echo "Attempts at guessing your architecture failed." echo "(triplet is $arch:$chip:$rele)" echo "Please specify the architecture as the first argument." echo "Do '$0 --help' for a list of available architectures." echo "Or file a bug at https://savannah.cern.ch/projects/savroot/" echo "including the full config.log and a dump of" echo " touch dummy_file.c; gcc -E -dM dummy_file.c" exit 1 ;; esac if [ "$arch" = "macosx" ]; then if [ `sw_vers | sed -n 's/ProductVersion://p' | cut -d . -f 2` -ge 5 ]; then if `sysctl machdep.cpu.extfeatures | grep "64" > /dev/null 2>&1` ; then arch=macosx64 fi fi fi if [ "$arch" = "solarisCC5" -a "$chip" = "i86pc" ]; then if `isainfo -b | grep "64" > /dev/null 2>&1` ; then arch=solaris64CC5 fi fi logmsg "$arch" } ###################################################################### # ### echo %%% Testing the echo features # if `(echo "testing\c"; echo 1,2,3) | grep c > /dev/null` ; then if `(echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn > /dev/null`; then ac_n= ac_c=' ' ac_t=' ' else ac_n=-n ac_c= ac_t= fi else ac_n= ac_c='\c' ac_t= fi ###################################################################### # ### echo %%% Find the source directory # message "Checking for source directory" ac_pwd=`pwd` && test -n "$ac_pwd" && ls_di=`ls -di .` && pwd_ls_di=`cd "$ac_pwd" && ls -di .` || { echo "$0: error: Working directory cannot be determined" >&2 exit 1; } test "x$ls_di" = "x$pwd_ls_di" || { echo "$0: error: pwd does not report name of working directory" >&2 exit 1; } # Find the source files # Try the directory containing this script, then the parent directory. ac_confdir=`dirname -- "$0" || expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$0" : 'X\(//\)[^/]' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || echo X"$0" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` ac_srcdir=$ac_confdir ac_unique_file="core/base/src/TObject.cxx" if test ! -r "$ac_srcdir/$ac_unique_file"; then ac_srcdir=.. fi if test ! -r "$ac_srcdir/$ac_unique_file"; then test ac_srcdir="$ac_confdir or .." { echo "$0: error: cannot find sources ($ac_unique_file) in $ac_srcdir" >&2 exit 1; } fi ac_msg="sources are in $ac_srcdir, but \`cd $ac_srcdir' does not work" ac_abs_confdir=`( cd "$ac_srcdir" && test -r "./$ac_unique_file" || { echo "$0: error: $ac_msg" >&2 exit 1; } pwd)` # When building in place, set ac_srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then ac_srcdir=. fi # Remove unnecessary trailing slashes from ac_srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $ac_srcdir in */) ac_srcdir=`expr "X$ac_srcdir" : 'X\(.*[^/]\)' \| "X$ac_srcdir" : 'X\(.*\)'`;; esac top_builddir=$ac_pwd case $ac_srcdir in .) # we are building in place top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # absolute name top_srcdir=$ac_srcdir ;; *) # Relative name top_srcdir=$ac_pwd/$ac_srcdir ;; esac # populate build directory if test ! "x$ac_srcdir" = "x."; then for d in config bin include build/misc main/src etc/daemons macros; do test ! -d $d && mkdir -p $d done cp -f ${ac_srcdir}/Makefile . cp -f ${ac_srcdir}/LICENSE . fi result "$top_srcdir" ################################################################### # ### echo %%% Some skeleton and config files # ARCHS=${ac_srcdir}/config/ARCHS MAKEIN=${ac_srcdir}/config/Makefile.in MAKEOUT=config/Makefile.config MAKECOMPIN=${ac_srcdir}/config/Makefile-comp.in MAKECOMPOUT=config/Makefile.comp CONFIGUREIN=${ac_srcdir}/config/RConfigure.in CONFIGUREOUT=include/RConfigure.h CONFIGOPTIN=${ac_srcdir}/config/RConfigOptions.in CONFIGOPTOUT=include/RConfigOptions.h RCONFIN=${ac_srcdir}/config/root-config.in RCONFOUT=bin/root-config ROOTRCIN=${ac_srcdir}/config/rootrc.in ROOTRCOUT=etc/system.rootrc ROOTAUTHRCIN=${ac_srcdir}/config/rootauthrc.in ROOTAUTHRCOUT=etc/system.rootauthrc ROOTDAEMONRCIN=${ac_srcdir}/config/rootdaemonrc.in ROOTDAEMONRCOUT=etc/system.rootdaemonrc MEMPROBEIN=${ac_srcdir}/config/memprobe.in MEMPROBEOUT=bin/memprobe MIMEUNIXIN=${ac_srcdir}/config/mimes.unix.in MIMEWIN32IN=${ac_srcdir}/config/mimes.win32.in MIMEOUT=etc/root.mimes ROOTDIN=${ac_srcdir}/config/rootd.in ROOTDOUT=etc/daemons/rootd.rc.d ROOTDXINETDIN=${ac_srcdir}/config/rootd.xinetd.in ROOTDXINETDOUT=etc/daemons/rootd.xinetd PROOFDIN=${ac_srcdir}/config/proofd.in PROOFDOUT=etc/daemons/proofd.rc.d PROOFDXINETDIN=${ac_srcdir}/config/proofd.xinetd.in PROOFDXINETDOUT=etc/daemons/proofd.xinetd PROOFSERVIN=${ac_srcdir}/config/proofserv.in PROOFSERVOUT=main/src/proofserv.sh ROOTHELPIN=${ac_srcdir}/config/root-help.el.in ROOTHELPOUT=build/misc/root-help.el ROOTSIN=${ac_srcdir}/config/roots.in ROOTSOUT=main/src/roots.sh HTMLIN=${ac_srcdir}/config/html.C.in HTMLOUT=macros/html.C THISROOTSHIN=${ac_srcdir}/config/thisroot.sh THISROOTSHOUT=bin/thisroot.sh THISROOTCSHIN=${ac_srcdir}/config/thisroot.csh THISROOTCSHOUT=bin/thisroot.csh THISROOTBATIN=${ac_srcdir}/config/thisroot.bat THISROOTBATOUT=bin/thisroot.bat GENREFLEXSHIN=${ac_srcdir}/config/genreflex.in GENREFLEXSHOUT=bin/genreflex GENREFLEXBATIN=${ac_srcdir}/config/genreflex.bat.in GENREFLEXBATOUT=bin/genreflex.bat GENREFLEXROOTCINTSHIN=${ac_srcdir}/config/genreflex-rootcint.in GENREFLEXROOTCINTSHOUT=bin/genreflex-rootcint GENREFLEXROOTCINTBATIN=${ac_srcdir}/config/genreflex-rootcint.bat.in GENREFLEXROOTCINTBATOUT=bin/genreflex-rootcint.bat SETXRDSHIN=${ac_srcdir}/config/setxrd.sh SETXRDSHOUT=bin/setxrd.sh SETXRDCSHIN=${ac_srcdir}/config/setxrd.csh SETXRDCSHOUT=bin/setxrd.csh # unset global command options that can cause havoc unset GREP_OPTIONS ###################################################################### # ### echo %%% Help function # confhelp() { vers=`cat build/version_number` cat </share/aclocal) --bindir Binary installation dir (/bin) --build Build configuration [debug, ...], overrides the ROOTBUILD shell variable --cintincdir CINT interpeted headers (/cint) --datadir Data installation dir (/share/root) --docdir Documentation (/share/doc/root) --elispdir Where to put Emacs Lisp (/share/emacs/site-lisp) --etcdir Config installation dir (/etc/root) --fontdir Font installation dir (/fonts) --iconpath Icon installation dir (/icons) --incdir Header installation dir (/include/root) --libdir Library installation dir (/lib/root) --macrodir Macro installation dir (/macros) --mandir Manpages installation dir (/share/man/man1) --no-create Do not create output files, dry run --prefix Installation prefix (/usr/local) --srcdir Sources installation dir (/src) --testdir Tests (/test) --tutdir Tutorials (/tutorial) If any of the flags --cintincdir, --datadir, --docdir, --etcdir, --iconpath --incdir, --libdir, --macrodir, --mandir, or --prefix is given, ROOT will be compiled with static directory names, and you should not set the ROOTSYS environment variable. enable/disable options, prefix with either --enable- or --disable- afdsmgrd Dataset manager for PROOF-based analysis facilities afs AFS support, requires AFS libs and objects alien AliEn support, requires libgapiUI from ALICE asimage Image processing support, requires libAfterImage astiff Include tiff support in image processing bonjour Bonjour support, requires libdns_sd and/or Avahi builtin-afterimage Built included libAfterImage, or use system libAfterImage builtin-ftgl Built included libFTGL, or use system libftgl builtin-freetype Built included libfreetype, or use system libfreetype builtin-glew Built included libGLEW, or use system libGLEW builtin-pcre Built included libpcre, or use system libpcre builtin-zlib Built included libz, or use system libz builtin-lzma Built included liblzma, or use system liblzma c++11 Build using C++11 compatible mode, requires gcc > 4.7.x or clang castor CASTOR support, requires libshift from CASTOR >= 1.5.2 chirp Chirp filesystem support, requires cctools >= 3.2.2 cintex Build the libCintex Reflex interface library cling Use cling as interpreter backend (experimental!), needs --with-llvm-config cocoa Use native Cocoa/Quartz graphics backend (MacOS X only) dcache dCache support, requires libdcap from DESY explicitlink Explicitly link with all dependent libraries fink Use libraries from an extra MacOS X package manager (Fink, MacPorts, ...) (default: enabled) fftw3 Fast Fourier Transform support, requires libfftw3 fitsio Read images and data from FITS files, requires cfitsio gviz Graphs visualization support, requires graphviz gdml GDML writer and reader gfal GFAL support, requires libgfal globus Globus authentication support, requires Globus toolkit glite gLite support, requires libglite-api-wrapper v.3 from GSI (https://subversion.gsi.de/trac/dgrid/wiki) gsl-shared Enable linking against shared libraries for GSL (default no) hdfs HDFS support; requires libhdfs from HDFS >= 0.19.1 krb5 Kerberos5 support, requires Kerberos libs ldap LDAP support, requires (Open)LDAP libs genvector Build the new libGenVector library mathmore Build the new libMathMore extended math library, requires GSL (vers. >= 1.8) memstat A memory statistics utility, helps to detect memory leaks minuit2 Build the new libMinuit2 minimizer library monalisa Monalisa monitoring support, requires libapmoncpp mysql MySQL support, requires libmysqlclient odbc ODBC support, requires libiodbc or libodbc opengl OpenGL support, requires libGL and libGLU oracle Oracle support, requires libocci pgsql PostgreSQL support, requires libpq pythia6 Pythia6 EG support, requires libPythia6 pythia8 Pythia8 EG support, requires libPythia8 python Python ROOT bindings, requires python >= 2.2 qt Qt graphics backend, requires libqt >= 4.x qtgsi GSI's Qt integration, requires libqt >= 3 reflex Build the libReflex dictionary library rfio RFIO support, requires libshift from CASTOR >= 1.5.2 roofit Build the libRooFit advanced fitting package rpath Set run-time library load path on executables ruby Ruby ROOT bindings, requires ruby >= 1.8 sapdb MaxDB/SapDB support, requires libsqlod and libsqlrte shadowpw Shadow password support shared Use shared 3rd party libraries if possible soversion Set version number in sonames (recommended) srp SRP support, requires SRP source tree ssl SSL encryption support, requires openssl table Build libTable contrib library tmva Build TMVA multi variate analysis library unuran UNURAN - package for generating non-uniform random numbers winrtdebug Link against the Windows debug runtime library x11 X11 support xml XML parser interface xrootd Build xrootd-dependent plugins for remote file access and PROOF (if supported) xft Xft support (X11 antialiased fonts) minimal set of libraries, can be combined with above --enable-... options --minimal Do not automatically search for support libraries --gminimal Do not automatically search for support libraries, but include X11 maximal set of libraries, enables all optional packages --all Do try to enable all optional support libraries with options, prefix with --with-, enables corresponding support afs AFS support, location of AFS distribution afs-incdir AFS support, location of AFS headers afs-libdir AFS support, location of libafsrpc. libasauthent afs-shared AFS support, controls usage of shared linkage AFS libraries {yes/no} alien-incdir AliEn support, location of gapiUI.h alien-libdir AliEn support, location of libapiUI alloc-libdir Alternative memory allocator support, location of allocator lib alloc-lib Alternative memory allocator support, allocator lib avahi-libdir Bonjour support, location of Avahi libraries avahi-incdir Bonjour support, location of Avahi headers castor-incdir CASTOR support, location of stager_api.h castor-libdir CASTOR support, location of libshift chirp-incdir Chirp support, location of chirp_reli.h chirp-libdir Chirp support, location of libchirp_client cppunit Cppunit testing, directory of the cppunit installation dcap-incdir dCache support, location of dcap.h dcap-libdir dCache support, location of libdcap dicttype dictionary type: "cint" (default), "reflex", or "gccxml" dnssd-libdir Bonjour support, location of libdns_sd dnssd-incdir Bonjour support, location of dns_sd.h finkdir Prefix of extra MacOS X package manager (Fink, MacPorts, ...) ftgl-incdir FTGL support, location of FTGL.h ftgl-libdir FTGL support, location of libftgl fftw3-incdir FFTW3 support, location of fftw3.h fftw3-libdir FFTW3 support, location of libfftw3 (libfftw3-3 for windows) cfitsio-incdir FITS support, location of fitsio.h cfitsio-libdir FITS support, location of libcfitsio gviz-incdir Graphviz support, location of gvc.h gviz-libdir Graphviz support, location of libgvplugin_core gfal-incdir GFAL support, location of gfal_api.h srm-ifce-incdir GFAL support, location of gfal_srm_ifce_types.h gfal-libdir GFAL support, location of libgfal glew-incdir GLEW support, location of glew.h glew-libdir GLEW support, location of libGLEW gsl-incdir GSL support, location of gsl/gsl_version.h gsl-libdir GSL support, location of libgsl gccxml Gccxml support, directory of the gccxml installation globus Globus support, path to what should be GLOBUS_LOCATION globus-incdir Globus support, location of globus header files globus-libdir Globus support, location of globus libraries hdfs-incdir HDFS support, location of hdfs.h hdfs-libdir HDFS support, location of libhdfs jni-incdir HDFS support, location of JNI headers jvm-libdir HDFS support, location of JVM library krb5 Kerberos5 support, location of Kerberos distribution krb5-incdir Kerberos5 support, location of krb5.h krb5-libdir Kerberos5 support, location of libkrb5 ldap-incdir LDAP support, location of ldap.h ldap-libdir LDAP support, location of libldap llvm-config LLVM/clang for cling, location of llvm-config script monalisa-incdir Monalisa support, location of ApMon.h monalisa-libdir Monalisa support, location of libapmoncpp mysql-incdir MySQL support, location of mysql.h mysql-libdir MySQL support, location of libmysqlclient odbc-incdir ODBC support, location of sqlext.h odbc-libdir ODBC support, location of libiodbc or libodbc opengl-incdir OpenGL support, location of GL/gl.h opengl-libdir OpenGL support, location of libGL oracle-incdir Oracle support, location of occi.h oracle-libdir Oracle support, location of libocci pgsql-incdir PostgreSQL support, location of libpq-fe.h pgsql-libdir PostgreSQL support, location of libpq pythia6-libdir PYTHIA6 support, location of libPythia6 pythia8-incdir PYTHIA8 support, location of Pythia8 includes pythia8-libdir PYTHIA8 support, location of libpythia8.so python-incdir Python support, location of Python.h python-libdir Python support, location of libpython qt-incdir Qt support, location of Qt/qglobal.h qt-libdir Qt support, location of libqt-mt or libqt ruby-incdir Ruby support, location of ruby.h ruby-libdir Ruby support, location of libruby sapdb-incdir SapDB support, location of sql.h sapdb-libdir SapDB support, location of libsqlod rfio-incdir RFIO support, location of rfio_api.h rfio-libdir RFIO support, location of librfio, libdpm or libshift srp Secure Remote Passwd support, location of SRP distribution srp-incdir SRP support, location header of t_server.h srp-libdir SRP support, location header of libsrp.a ssl OpenSSL support, location of openssl installation ssl-incdir OpenSSL support, location of openssl headers ssl-libdir OpenSSL support, location of libssl ssl-shared OpenSSL support, controls usage of shared linkage SSL libraries {yes/no} sys-iconpath Extra icon path thread-libdir Thread support, path to libpthread xml-incdir XML support, location of libxml/tree.h xml-libdir XML support, location of libxml2 x11-libdir X11 support, path to libX11 xpm-libdir XPM support, path to libXpm xft-libdir Xft support, path to libXft xext-libdir Xext support, path to libXext xrootd XROOTD support, path to XROOTD distribution xrootd-incdir XROOTD support, path to XROOTD header files (XrdVersion.hh, ...) xrootd-libdir XROOTD support, path to XROOTD libraries (libXrdClient, ...) with compiler options, prefix with --with-, overrides default value cc alternative C compiler and options to be used cxx alternative C++ compiler and options to be used f77 alternative Fortran compiler and options to be used ld alternative Linker and options to be used clang use clang compiler instead of gcc (mutual exclusive with the cc, cxx and ld options) cross compiling options, currently only used when building for ios and iossim --host[=hostarch] host architecture to be used in case of cross compiling --with-hostcc alternative host C compiler in case of cross compiling --with-hostcxx alternative host C++ compiler in case of cross compiling --with-hostld alternative host Linker in case of cross compiling Supported Architectures: EOF cat ${ac_srcdir}/config/ARCHS | sed -e 's/^/ /' cat < EOF } ###################################################################### # ### echo %%% Store invocation and machine info in config.log # logmsg "Invoked on `hostname 2>/dev/null`" logmsg " with `uname -a 2>/dev/null`" logmsg " at `date 2>/dev/null`:" logmsg " $0" for argv in "$@"; do logmsg " \"${argv}\"" done ###################################################################### # ### echo %%% See if we got the architecture # if test $# -lt 1 ; then guess_architecture else case $1 in -h|--help) confhelp ; exit 0 ;; -*) # in case the first argument wasn't an architecure but an option guess_architecture ;; *) arch=$1 logmsg " Architecture set to $arch by user" shift ;; esac fi # check that we got a valid architecture if test "$arch" = "linuxegcs" ; then arch="linux" fi if test "$arch" = "win32gdk" ; then arch="win32" fi if `awk '{ print $1 }' $ARCHS | grep "^$arch$" > /dev/null 2>&1` ; then echo "Configuring for $arch" else echo "Invalid architecture. Try $0 --help" logmsg "Invalid architecture \"$arch\"." exit 1 fi platform=`grep "^PLATFORM *=" ${ac_srcdir}/config/Makefile.$arch | awk '{ print $3 }'` case $arch in sgicc) logmsg "Will check 32bit libraries" checklib32="yes" ;; linuxppc64*|sgicc64) logmsg "Will ONLY check 64bit libraries" checkonlylib64="yes" ;; linuxx8664k1om*) logmsg "Will not check 64bit libraries" checklinux64="no" checklib64="no" enable_cintex="no" enable_reflex="no" enable_genvector="no" enable_tmva="no" ;; linuxx8664*) logmsg "Will check 64bit libraries" checklinux64="yes" checklib64="yes" ;; hpuxia64acc) logmsg "Will check HP/UX 64bit libraries" checkhpux64="yes" ;; solaris64CC5) logmsg "Will check Solaris 64bit libraries" checksolaris64="yes" checklib64="yes" ;; macosx*) logmsg "Will check for compatible libraries" checklibcompat="yes" ;; ios*) logmsg "Will check iOS SDK libraries" message "Checking for iOS SDK" iossdk=`make -s -f ${ac_srcdir}/config/Makefile.$arch CONFIGURE=yes showsdk` result "$iossdk" if [ ! -d $iossdk ]; then result "`basename $0`: no iOS SDK found at $iossdk" result "Run "xcode-select" to update the developer directory path" exit 1 fi enable_cintex="no" enable_reflex="no" enable_genvector="no" enable_tmva="no" ;; win32) logmsg "Will use by default builtin versions of libraries on Win32" enable_builtin_freetype="yes" enable_builtin_ftgl="yes" enable_builtin_glew="yes" enable_builtin_pcre="yes" enable_builtin_zlib="yes" enable_builtin_lzma="yes" top_builddir=`cygpath -u $top_builddir` top_srcdir=`cygpath -u $top_srcdir` ;; esac # check for which, avoid using which, as it may be a buggy csh script. if type -path type >/dev/null 2>&1 ; then cwhich="type -path" elif type whence >/dev/null 2>&1 ; then cwhich="whence" else # XXX Should do something better... # ... possibly using type inside a sh function whence() { ... } cwhich="which" fi # Check for sanity of source on Mac OS X: e.g. pcre-*.tar.gz must exist # which might not be the case if source was unpacked with StuffIt if test "x$platform" = "xmacosx" ; then if test ! -f ${ac_srcdir}/core/pcre/src/pcre-*.tar.gz ; then echo "Source tree does not contain expected files, please unpack" echo "using tar and not StuffIt" exit 1 fi if [ `sw_vers | sed -n 's/ProductVersion://p' | cut -d . -f 2` -ge 5 ]; then macosx105=yes fi if [ `sw_vers | sed -n 's/ProductVersion://p' | cut -d . -f 2` -ge 6 ]; then macosx106=yes fi if [ `sw_vers | sed -n 's/ProductVersion://p' | cut -d . -f 2` -ge 8 ]; then macosx108=yes fi fi if test "x$platform" = "xlinux" ; then linuxdist= if `$cwhich lsb_release > /dev/null 2>&1` ; then if lsb_release -d | grep -i 'ubuntu' > /dev/null 2>& 1; then linuxdist="multiarch" fi if lsb_release -d | grep -i 'debian' > /dev/null 2>& 1; then linuxdist="multiarch" fi if lsb_release -d | grep -i 'mint' > /dev/null 2>& 1; then linuxdist="multiarch" fi fi debmultiarch= if test "x$linuxdist" = "xmultiarch"; then if `$cwhich dpkg-architecture > /dev/null 2>&1` ; then if `dpkg-architecture -qDEB_HOST_MULTIARCH > /dev/null 2>&1` ; then logmsg "Checking dpkg-architecture" debmultiarch=`dpkg-architecture -qDEB_HOST_MULTIARCH 2> /dev/null` logmsg "$debmultiarch" fi else result "`basename $0`: dpkg-architecture MUST be installed" result "See http://root.cern.ch/drupal/content/build-prerequisites" exit 1 fi fi fi ###################################################################### # ### echo %%% Some clean up # trapcmd="rm -rf Makefile.tmp RConfigure.tmp RConfigure-out.tmp \ RConfigOptions.tmp RConfigOptions-out.tmp \ Makefile-comp.tmp root-config.tmp rootrc.tmp \ rootauthrc.tmp rootdaemonrc.tmp memprobe.tmp rootd.tmp \ proofd.tmp rootd.xinetd.tmp proofd.xinetd.tmp proofserv.tmp \ roots.tmp conftest.mk conftest.c conftest conftest.dSYM" trap "$trapcmd; exit 1" 1 2 3 15 trap "$trapcmd" 0 ###################################################################### # ### echo %%% Command line arguments # if test $# -gt 0 ; then while test ! "x$1" = "x" ; do case "$1" in -*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;; *) optarg= ;; esac case $1 in --help|-h) confhelp ; exit 0 ;; ################################################################ # # With options to specifiy third part software # --no-create) noact="yes" ;; --nohowto) nohowto="yes" ;; --fail-on-missing) fail_on_missing="yes" ;; --all) ;; --minimal) ;; --gminimal) ;; --host) savearch=$arch guess_architecture host=$arch arch=$savearch ;; --host=*) host=$optarg ;; --with-afs=*) afsdir=$optarg ; enable_afs="yes" ;; --with-afs-incdir=*) afsincdir=$optarg ; enable_afs="yes" ;; --with-afs-libdir=*) afslibdir=$optarg ; enable_afs="yes" ;; --with-afs-shared=*) afsshared=$optarg ; enable_afs="yes" ;; --with-alien-incdir=*) alienincdir=$optarg ; enable_alien="yes" ;; --with-alien-libdir=*) alienlibdir=$optarg ; enable_alien="yes" ;; --with-alloc-libdir=*) alloclibdir=$optarg ; enable_alloc="yes" ;; --with-alloc-lib=*) alloclib=$optarg ; enable_alloc="yes" ;; --with-afterimage-incdir=*) afterimageincdir=$optarg; enable_builtin_afterimage=no ;; --with-afterimage-libdir=*) afterimagelibdir=$optarg; enable_builtin_afterimage=no ;; --with-castor-incdir=*) castorincdir=$optarg ; enable_castor="yes" ;; --with-castor-libdir=*) castorlibdir=$optarg ; enable_castor="yes" ;; --with-cern-libdir=*) echo "WARNING: option $1 is deprecated and ignored"'!' ;; --with-chirp-incdir=*) chirpincdir=$optarg ; enable_chirp="yes" ;; --with-chirp-libdir=*) chirplibdir=$optarg ; enable_chirp="yes" ;; --with-cint-maxstruct=*) cintmaxstruct=$optarg ;; --with-cint-maxtypedef=*) cintmaxtypedef=$optarg;; --with-cint-longline=*) cintlongline=$optarg ;; --with-cppunit=*) cppunit=$optarg ;; --with-dcap-incdir=*) dcapincdir=$optarg ; enable_dcache="yes" ;; --with-dcap-libdir=*) dcaplibdir=$optarg ; enable_dcache="yes" ;; --with-dicttype=*) dicttype=$optarg ;; --with-dnssd-incdir=*) dnssdincdir=$optarg ; enable_bonjour="yes" ;; --with-dnssd-libdir=*) dnssdlibdir=$optarg ; enable_bonjour="yes" ;; --with-avahi-incdir=*) avahiincdir=$optarg ; enable_bonjour="yes" ;; --with-avahi-libdir=*) avahilibdir=$optarg ; enable_bonjour="yes" ;; --with-finkdir=*) finkdir=$optarg ; enable_fink="yes" ;; --with-ftgl-incdir=*) ftglincdir=$optarg ; enable_builtin_ftgl=no;; --with-ftgl-libdir=*) ftgllibdir=$optarg ; enable_builtin_ftgl=no;; --with-fftw3-incdir=*) fftw3incdir=$optarg ; enable_fftw3="yes" ;; --with-fftw3-libdir=*) fftw3libdir=$optarg ; enable_fftw3="yes" ;; --with-cfitsio-incdir=*) cfitsioincdir=$optarg ; enable_fitsio="yes" ;; --with-cfitsio-libdir=*) cfitsiolibdir=$optarg ; enable_fitsio="yes" ;; --with-gviz-incdir=*) gvizincdir=$optarg ; enable_gviz="yes" ;; --with-gviz-libdir=*) gvizlibdir=$optarg ; enable_gviz="yes" ;; --with-gfal-incdir=*) gfalincdir=$optarg ; enable_gfal="yes" ;; --with-gfal-libdir=*) gfallibdir=$optarg ; enable_gfal="yes" ;; --with-srm-ifce-incdir=*) srmifceincdir=$optarg;; --with-glew-incdir=*) glewincdir=$optarg ; enable_builtin_glew=no;; --with-glew-libdir=*) glewlibdir=$optarg ; enable_builtin_glew=no;; --with-gsl-incdir=*) gslincdir=$optarg ; enable_gsl="yes" ;; --with-gsl-libdir=*) gsllibdir=$optarg ; enable_gsl="yes" ;; --with-globus=*) globusdir=$optarg ; enable_globus="yes" ;; --with-globus-incdir=*) globusincdir=$optarg ; enable_globus="yes" ;; --with-globus-libdir=*) globuslibdir=$optarg ; enable_globus="yes" ;; --with-gccxml=*) gccxml=$optarg ;; --with-hdfs-incdir=*) hdfsincdir=$optarg ; enable_hdfs="yes" ;; --with-hdfs-libdir=*) hdfslibdir=$optarg ; enable_hdfs="yes" ;; --with-jni-incdir=*) jniincdir=$optarg ;; --with-jvm-libdir=*) jvmlibdir=$optarg ;; --with-krb5=*) krb5dir=$optarg ; enable_krb5="yes" ;; --with-krb5-incdir=*) krb5incdir=$optarg ; enable_krb5="yes" ;; --with-krb5-libdir=*) krb5libdir=$optarg ; enable_krb5="yes" ;; --with-ldap-incdir=*) ldapincdir=$optarg ; enable_ldap="yes" ;; --with-ldap-libdir=*) ldaplibdir=$optarg ; enable_ldap="yes" ;; --with-llvm-config=*) llvmconfig=$optarg ;; # require explicit --enable-cling --with-mysql-incdir=*) mysqlincdir=$optarg ; enable_mysql="yes" ;; --with-mysql-libdir=*) mysqllibdir=$optarg ; enable_mysql="yes" ;; --with-monalisa-incdir=*)monalisaincdir=$optarg; enable_monalisa="yes";; --with-monalisa-libdir=*)monalisalibdir=$optarg; enable_monalisa="yes";; --with-odbc-incdir=*) odbcincdir=$optarg ; enable_odbc="yes" ;; --with-odbc-libdir=*) odbclibdir=$optarg ; enable_odbc="yes" ;; --with-opengl-incdir=*) openglincdir=$optarg ; enable_opengl="yes" ;; --with-opengl-libdir=*) opengllibdir=$optarg ; enable_opengl="yes" ;; --with-oracle-incdir=*) oracleincdir=$optarg ; enable_oracle="yes" ;; --with-oracle-libdir=*) oraclelibdir=$optarg ; enable_oracle="yes" ;; --with-pgsql-incdir=*) pgsqlincdir=$optarg ; enable_pgsql="yes" ;; --with-pgsql-libdir=*) pgsqllibdir=$optarg ; enable_pgsql="yes" ;; --with-pythia6-libdir=*) pythia6libdir=$optarg ; enable_pythia6="yes" ;; --with-pythia6-uscore=*) pythia6uscore=$optarg ; enable_pythia6="yes" ;; --with-pythia8-incdir=*) pythia8incdir=$optarg ; enable_pythia8="yes" ;; --with-pythia8-libdir=*) pythia8libdir=$optarg ; enable_pythia8="yes" ;; --with-python-incdir=*) pythonincdir=$optarg ; enable_python="yes" ;; --with-python-libdir=*) pythonlibdir=$optarg ; enable_python="yes" ;; --with-qt-incdir=*) qtincdir=$optarg ; mocdir=$optarg/../bin; enable_qt="yes"; enable_qtgsi="yes" ;; --with-qt-libdir=*) qtlibdir=$optarg ; enable_qt="yes"; enable_qtgsi="yes" ;; --with-ruby-incdir=*) rubyincdir=$optarg ; enable_ruby="yes" ;; --with-ruby-libdir=*) rubylibdir=$optarg ; enable_ruby="yes" ;; --with-sapdb-incdir=*) sapdbincdir=$optarg ; enable_sapdb="yes" ;; --with-sapdb-libdir=*) sapdblibdir=$optarg ; enable_sapdb="yes" ;; --with-rfio-incdir=*) shiftincdir=$optarg ; enable_rfio="yes" ;; --with-rfio-libdir=*) shiftlibdir=$optarg ; enable_rfio="yes" ;; --with-srp=*) srpdir=$optarg ; enable_srp="yes" ;; --with-srp-incdir=*) srpincdir=$optarg ; enable_srp="yes" ;; --with-srp-libdir=*) srplibdir=$optarg ; enable_srp="yes" ;; --with-ssl=*) ssldir=$optarg ; enable_ssl="yes" ;; --with-ssl-incdir=*) sslincdir=$optarg ; enable_ssl="yes" ;; --with-ssl-libdir=*) ssllibdir=$optarg ; enable_ssl="yes" ;; --with-ssl-shared=*) sslshared=$optarg ; enable_ssl="yes" ;; --with-sys-iconpath=*) extraiconpath=$optarg ;; --with-thread-libdir=*) threadlibdir=$optarg ; enable_thread="yes" ;; --with-xml-incdir=*) xmlincdir=$optarg ; enable_xml="yes" ;; --with-xml-libdir=*) xmllibdir=$optarg ; enable_xml="yes" ;; --with-x11-libdir=*) x11libdir=$optarg ;; --with-xpm-libdir=*) xpmlibdir=$optarg ;; --with-xft-libdir=*) xftlibdir=$optarg ;; --with-xext-libdir=*) xextlibdir=$optarg ;; --with-xrootd=*) xrootddir=$optarg ; enable_xrootd="yes" ;; --with-xrootd-incdir=*) xrdincdir=$optarg ; enable_xrootd="yes" ;; --with-xrootd-libdir=*) xrdlibdir=$optarg ; enable_xrootd="yes" ;; --with-cc=*) altcc=$optarg ;; --with-cxx=*) altcxx=$optarg ;; --with-f77=*) altf77=$optarg ;; --with-ld=*) altld=$optarg ;; --with-clang) altcc=clang; altcxx=clang++; altld=clang++ ;; --with-hostcc=*) hostcc=$optarg ;; --with-hostcxx=*) hostcxx=$optarg ;; --with-hostld=*) hostld=$optarg ;; ################################################################ # # Enable/disable to turn on/off third party software linkage and # features # --enable-*) f=`echo $1 | sed -e 's/--//' -e 's/-/_/g' -e 's/++11/xx11/'` eval prev='$'`echo ${f}` eval prev_expl='$'`echo ${f}_explicit` if test "${prev}:${prev_expl}" = "yes:"; then echo "INFO: $1: already enabled by default." fi if test ! "x`echo ${deprecated_options} | grep ${f}`" = "x"; then echo "WARNING: option $1 is deprecated and ignored"'!' fi if test "x${prev_expl}" = "xno"; then echo "WARNING: conflicting --disable / $1, $1 wins" fi eval ${f}=yes eval ${f}_explicit=yes for c in $options ; do if test "x$c" = "x$f" ; then f="" fi done for c in $deprecated_options ; do if test "x$c" = "x$f" ; then f="" fi done if test "x$f" != "x" ; then echo "Invalid option '$1'. Try $0 --help" ; exit 1 ; fi ;; --disable-*) f=`echo $1 | sed -e 's/--disable/enable/' -e 's/-/_/g' -e 's/++11/xx11/'` eval prev='$'`echo ${f}` eval prev_expl='$'`echo ${f}_explicit` if test "${prev}:${prev_expl}" = "xno:"; then echo "INFO: $1: already disabled by default." fi if test "x${prev_expl}" = "xyes"; then echo "WARNING: conflicting --enable / $1, $1 wins" fi eval ${f}=no eval ${f}_explicit=no for c in $options ; do if test "x$c" = "x$f" ; then f="" fi done if test "x$f" != "x" ; then echo "Invalid option '$1'. Try $0 --help" ; exit 1 ; fi ;; ################################################################ # # Build steering option # --build=*) rootbuild="ROOTBUILD := $optarg" ;; ################################################################ # # Install path options # --aclocaldir=*) haveconfig=-DR__HAVE_CONFIG ; aclocaldir=$optarg ;; --bindir=*) haveconfig=-DR__HAVE_CONFIG ; bindir=$optarg ;; --cintincdir=*) haveconfig=-DR__HAVE_CONFIG ; cintincdir=$optarg ;; --datadir=*) haveconfig=-DR__HAVE_CONFIG ; datadir=$optarg ;; --docdir=*) haveconfig=-DR__HAVE_CONFIG ; docdir=$optarg ;; --elispdir=*) haveconfig=-DR__HAVE_CONFIG ; elispdir=$optarg ;; --etcdir=*) haveconfig=-DR__HAVE_CONFIG ; etcdir=$optarg ;; --fontdir=*) haveconfig=-DR__HAVE_CONFIG ; fontdir=$optarg ;; --iconpath=*) haveconfig=-DR__HAVE_CONFIG ; iconpath=$optarg ;; --incdir=*) haveconfig=-DR__HAVE_CONFIG ; incdir=$optarg ;; --libdir=*) haveconfig=-DR__HAVE_CONFIG ; libdir=$optarg ;; --macrodir=*) haveconfig=-DR__HAVE_CONFIG ; macrodir=$optarg ;; --mandir=*) haveconfig=-DR__HAVE_CONFIG ; mandir=$optarg ;; --pkglist*) show_pkglist="yes" ; noact="yes" ;; --prefix*) haveconfig=-DR__HAVE_CONFIG ; prefix=$optarg ;; --srcdir=*) haveconfig=-DR__HAVE_CONFIG ; srcdir=$optarg ;; --testdir=*) haveconfig=-DR__HAVE_CONFIG ; testdir=$optarg ;; --tutdir=*) haveconfig=-DR__HAVE_CONFIG ; tutdir=$optarg ;; *) echo "Invalid option '$1'. Try $0 --help" ; exit 1 ;; esac shift done fi ###################################################################### # ### echo %%% Copy skeletons to temporary files # if test "x$noact" = "xno"; then cp -f $MAKEIN Makefile.tmp cp -f $MAKECOMPIN Makefile-comp.tmp cp -f $CONFIGUREIN RConfigure.tmp cp -f $CONFIGOPTIN RConfigOptions.tmp cp -f $RCONFIN root-config.tmp cp -f $ROOTRCIN rootrc.tmp cp -f $ROOTAUTHRCIN rootauthrc.tmp cp -f $ROOTDAEMONRCIN rootdaemonrc.tmp cp -f $MEMPROBEIN memprobe.tmp cp -f $ROOTDIN rootd.tmp cp -f $ROOTDXINETDIN rootd.xinetd.tmp cp -f $PROOFDIN proofd.tmp cp -f $PROOFDXINETDIN proofd.xinetd.tmp cp -f $PROOFSERVIN proofserv.tmp cp -f $ROOTSIN roots.tmp fi ###################################################################### # ### echo %%% Should sonames contain version numbers # if test "x$enable_soversion" = "xyes"; then logmsg "Enabling version numbers in so names" major=`sed 's|\(.*\)\..*/.*|\1|' < ${ac_srcdir}/build/version_number` minor=`sed 's|.*\.\(.*\)/.*|\1|' < ${ac_srcdir}/build/version_number` revis=`sed 's|.*\..*/\([0-9]*\).*|\1|' < ${ac_srcdir}/build/version_number` mkliboption="-v $major $minor $revis " unset major unset minor unset revis fi ###################################################################### # ### echo %%% On Windoze always set enable_shared to no; need .lib # if test "x$platform" = "xwin32"; then enable_shared="no" enable_x11="no" fi ###################################################################### # ### echo %%% Check for Fink or MacPorts on Mac OS X # if test "x$platform" = "xmacosx"; then message "Checking for Fink/MacPorts directory" if test "x$enable_fink" = "xyes"; then if test -d "$finkdir"; then # User specified a directory with --with-finkdir=... logmsg "Using user-specified Fink directory" logmsg "$finkdir" else # Fink has precedence over MacPorts logmsg "Checking Fink directory" finkdir=`$cwhich fink 2>&1 | sed -ne "s/\/bin\/fink//p"` logmsg "$finkdir" if test "x$finkdir" = "x"; then logmsg "Checking MacPorts directory" finkdir=`$cwhich port 2>&1 | sed -ne "s/\/bin\/port//p"` logmsg "$finkdir" fi fi result "$finkdir" else logmsg "Fink/MacPorts disabled" result "disabled" fi else enable_fink="no" fi ###################################################################### # ### echo %%% On iOS and Intel MIC always disable X11 # if test "x$platform" = "xios" || test "x$platform" = "xlinux-k1om"; then enable_x11="no" if test "x$host" = "x"; then savearch=$arch guess_architecture host=$arch arch=$savearch fi else # cross compiling only supported for ios and Intel MIC for the time being host= fi ###################################################################### # ### echo %%% If no X11 then also no OpenGL and ASImage on non Win32 platforms # if test "x$enable_x11" = "xno" && test ! "x$platform" = "xwin32"; then enable_opengl="no" enable_asimage="no" fi ###################################################################### # ### echo %%% On MacOS X >=10.5 always enable_rpath in case of non-prefix install # if test ! "x$macosx105" = "x"; then if test "x$enable_rpath" = "xno" && test "x$haveconfig" = "x" ; then enable_rpath="yes" fi fi ###################################################################### # ### echo %%% check for GNU make >= 3.80 - Mandatory version of make # # Mandatory test, must succeed # Check for GNU make >= 3.80 # message "Checking for GNU Make version >= 3.80" gnumake="make --no-print-directory" gnu=`$gnumake -v 2>&1 | awk 'BEGIN { FS=" "} { if (NR==1) print $1 }'` if test ! "x$gnu" = "xGNU" ; then gnumake="gmake --no-print-directory" gnu=`$gnumake -v 2>&1 | awk 'BEGIN { FS=" "} { if (NR==1) print $1 }'` if test ! "x$gnu" = "xGNU" ; then gnumake="" fi fi if test ! "x$gnumake" = "x" ; then gnuv=`$gnumake -v | tr '.,' ' ' | awk 'BEGIN { FS=" "} { if (NR==1 && $3 == "version") printf "%d", ($4*1000)+($5*10)+$6; else printf "%d", ($3*1000)+($4*10)+$5 }'` if test $gnuv -lt 3800 ; then result "no" result "`basename $0`: GNU Make >= 3.80 MUST be installed, current version $gnuv is too old" result "See http://root.cern.ch/drupal/content/build-prerequisites" exit 1 fi result "ok" else result "no" result "`basename $0`: GNU Make >= 3.80 MUST be installed" result "See http://root.cern.ch/drupal/content/build-prerequisites" exit 1 fi ###################################################################### # ### echo %%% check for compilers # # Mandatory test, must succeed # Check for C, C++ compilers, and optionally FORTRAN # check_comp C if test $found_comp -eq 0 ; then result "`basename $0`: C compiler MUST be installed" result "See http://root.cern.ch/drupal/content/build-prerequisites" exit 1 fi check_comp C++ if test $found_comp -eq 0 ; then result "`basename $0`: C++ compiler MUST be installed" result "See http://root.cern.ch/drupal/content/build-prerequisites" exit 1 fi check_comp LD if test $found_comp -eq 0 ; then result "`basename $0`: Linker MUST be installed" result "See http://root.cern.ch/drupal/content/build-prerequisites" exit 1 fi check_comp F77 if test $found_comp -eq 0 ; then # missing F77 is not fatal altf77= fi ###################################################################### # ### echo %%% Check host environment in case of cross compiling # # if test ! "x$host" = "x"; then if ! test -f ${ac_srcdir}/config/Makefile.$host; then echo 'Invalid host platform' $host exit 1 fi compmsgextra="host " archbak=$arch arch=$host altccbak=$altcc altcc=$hostcc check_comp C if test ${found_comp} -eq 0; then echo "Cannot find host CC $hostcc" exit 1 fi altcc=$altccbak altcxxbak=$altcxx altcxx=$hostcxx check_comp C++ if test ${found_comp} -eq 0; then echo "Cannot find host CXX $hostcc" exit 1 fi altcxx=$altcxxbak altldbak=$altld altld=$hostld check_comp LD if test ${found_comp} -eq 0; then echo 'Cannot find host linker (LD)' $hostcc exit 1 fi altld=$altldbak compmsgextra="" arch=$archbak fi ###################################################################### # ### echo %%% C++11 - compile using c++11 compatible option # # needs gcc > 4.7.x or clang usecxx11="undef" if test "x$enable_cxx11" = "xyes"; then message "Checking whether c++11 mode is supported" check_cxxopt -std=c++11 if test $cxxopt_result -eq 0 ; then enable_cxx11="no" result "no" else usecxx11="define" result "yes" fi fi ###################################################################### # ### echo %%% Check if native MacOS X Cocoa/Quartz backend should be build # if test ! "x$platform" = "xmacosx"; then enable_cocoa="no" fi hascocoa="undef" if test "x$enable_cocoa" = "xyes"; then message "Checking whether to build native MacOS X Cocoa backend" hascocoa="define" enable_x11="no" result "yes" message "Checking for OSX SDK" osxsdk=`make -s -f ${ac_srcdir}/config/Makefile.$arch CONFIGURE=yes showsdk` result "$osxsdk" if [ ! -d $osxsdk ]; then result "`basename $0`: no OSX SDK found at $osxsdk" result "Run "xcode-select" to update the developer directory path" exit 1 else openglincdir=${osxsdk}/System/Library/Frameworks/OpenGL.framework/Headers opengllibdir=${osxsdk}/System/Library/Frameworks/OpenGL.framework/Libraries fi fi ###################################################################### # ### echo %%% X11 and XPM Library - Mandatory lib on Unix # # Mandatory test, must succeed # Check for X11 and Xpm library (for X11 use always shared lib) # if test ! "x$enable_x11" = "xno" ; then check_library "libX11" "yes" "$x11libdir" \ ${finkdir:+$finkdir/lib} \ /usr/lib /usr/X11R6/lib /usr/lib/X11 /usr/openwin/lib \ /usr/local/lib /usr/local/lib/X11 /usr/local/X11R6/lib \ /usr/X11/lib /usr/lib/X11R5 x11libdir=$found_dir if test "x$found_lib" = "x" ; then result "`basename $0`: libX11 MUST be installed" result "See http://root.cern.ch/drupal/content/build-prerequisites" exit 1 fi check_header "X11/Xlib.h" "" \ ${finkdir:+$finkdir/include} \ /usr/include /usr/X11R6/include /usr/include/X11 /usr/openwin/include \ /usr/local/include /usr/local/include/X11 /usr/local/X11R6/include \ /usr/X11/include /usr/include/X11R5 x11incdir=$found_dir if test "x$found_dir" = "x" ; then result "`basename $0`: X11 headers MUST be installed" result "See http://root.cern.ch/drupal/content/build-prerequisites" exit 1 fi check_header "X11/xpm.h" "" \ $XPM ${XPM:+$XPM/include} \ ${finkdir:+$finkdir/include} \ /usr/include /usr/X11R6/include /usr/include/X11 /usr/openwin/include \ /usr/local/include /usr/local/include/X11 /usr/local/X11R6/include \ /usr/X11/include /usr/include/X11R5 if test "x$found_dir" = "x" ; then result "`basename $0`: xpm headers MUST be installed" result "See http://root.cern.ch/drupal/content/build-prerequisites" exit 1 fi check_header "X11/Xft/Xft.h" "" \ ${finkdir:+$finkdir/include} \ /usr/include /usr/X11R6/include /usr/include/X11 /usr/openwin/include \ /usr/local/include /usr/local/include/X11 /usr/local/X11R6/include \ /usr/X11/include /usr/include/X11R5 if test "x$found_dir" = "x" ; then result "`basename $0`: Xft headers MUST be installed" result "See http://root.cern.ch/drupal/content/build-prerequisites" exit 1 fi if test ! "x$arch" = "xaix5" ; then check_header "X11/extensions/shape.h" "" \ ${finkdir:+$finkdir/include} \ /usr/include /usr/X11R6/include /usr/include/X11 \ /usr/openwin/include /usr/local/include /usr/local/include/X11 \ /usr/local/X11R6/include /usr/X11/include /usr/include/X11R5 if test "x$found_dir" = "x" ; then result "`basename $0`: X11/extensions/shape.h header MUST be installed" result "See http://root.cern.ch/drupal/content/build-prerequisites" exit 1 fi fi check_library "libXpm" "$enable_shared" "$xpmlibdir" \ $XPM ${XPM:+$XPM/lib} \ ${finkdir:+$finkdir/lib} \ /usr/local/lib /usr/lib /usr/lib/X11 \ /usr/local/lib/X11 /usr/X11R6/lib /usr/local/X11R6/lib \ /usr/X11/lib xpmlib=$found_lib xpmlibdir=$found_dir if test "x$xpmlib" = "x" ; then result "`basename $0`: libXpm MUST be installed" result "See http://root.cern.ch/drupal/content/build-prerequisites" exit 1 fi check_library "libXft" "$enable_shared" "$xftlibdir" \ ${finkdir:+$finkdir/lib} \ /usr/local/lib /usr/lib /usr/lib/X11 \ /usr/local/lib/X11 /usr/X11R6/lib /usr/local/X11R6/lib \ /usr/X11/lib if test "x$found_lib" = "x" ; then result "`basename $0`: libXft MUST be installed" result "See http://root.cern.ch/drupal/content/build-prerequisites" exit 1 fi if test "x$platform" = "xmacosx" && test ! "x$x11libdir" = "x$found_dir" ; then result "`basename $0`: libXft not in same directory as libX11" result "For consistency they should be in the same directory" exit 1 fi check_library "libXext" "$enable_shared" "$xextlibdir" \ ${finkdir:+$finkdir/lib} \ /usr/local/lib /usr/lib /usr/lib/X11 \ /usr/local/lib/X11 /usr/X11R6/lib /usr/local/X11R6/lib \ /usr/X11/lib if test "x$found_lib" = "x" ; then result "`basename $0`: libXext MUST be installed" result "See http://root.cern.ch/drupal/content/build-prerequisites" exit 1 fi if test "x$platform" = "xmacosx" && test ! "x$x11libdir" = "x$found_dir" ; then result "`basename $0`: libXext not in same directory as libX11" result "For consistency they should be in the same directory" exit 1 fi else x11libdir="" xpmlibdir="" xftlibdir="" xextlibdir="" fi ###################################################################### # ### echo %%%Xft support (X11 antialiased fonts) # if test "x$enable_x11" = "xno"; then enable_xft="no" fi hasxft="undef" if test "x$enable_xft" = "xyes"; then hasxft="define" fi ###################################################################### # ### echo %%% Windows Debug Runtime (-MDd) # if test "x$enable_winrtdebug" = "x" ; then e=`echo $rootbuild | sed 's/.*debug.*/1/'` if test "x$e" = "x1"; then enable_winrtdebug=yes else enable_winrtdebug=no fi fi if test "x$platform" != "xwin32"; then enable_winrtdebug=no fi ###################################################################### # ### echo %%% Posix Thread Library # # Check for posix thread library # case $platform in win32) if test "x$enable_thread" = "x"; then enable_thread="yes" fi ;; macosx) if test "x$enable_thread" = "x" || test "x$enable_thread" = "xyes"; then if test ! "x$macosx105" = "x"; then enable_thread="yes" threadflag="-pthread" threadlib="-lpthread" threadlibdir= else enable_thread="yes" threadflag="-D_REENTRANT" fi fi ;; linux|fbsd) if test "x$enable_thread" = "x" || test "x$enable_thread" = "xyes"; then enable_thread="yes" threadflag="-pthread" threadlib="-pthread" threadlibdir= fi ;; esac case $arch in win32gcc) # if it was not set it was turned on in the above "linux" case if test "x$enable_thread" = "xyes"; then threadflag= threadlib= fi ;; hpuxia64acc) if test "x$enable_thread" = "x" || test "x$enable_thread" = "xyes"; then enable_thread="yes" threadflag="-mt" threadlib="-mt" threadlibdir= fi ;; esac if test "x$enable_thread" = "xyes" && \ test ! "x$platform" = "xwin32" && \ test "x$threadlib" = "x" ; then check_library "libpthread" "$enable_shared" "$threadlibdir" \ $THREAD ${THREAD:+$THREAD/lib} \ /usr/lib /usr/local/lib /usr/lib/X11 \ /usr/local/lib/X11 /usr/X11R6/lib /usr/local/X11R6/lib \ /usr/X11/lib /usr/shlib threadlib=$found_lib threadlibdir=$found_dir if test "x$threadlib" = "x" ; then enable_thread="no" fi fi haspthread="undef" if test "x$enable_thread" = "xyes" && \ test ! "x$platform" = "xwin32"; then haspthread="define" fi ###################################################################### # ### echo %%% libfreetype (builtin or system) - Mandatory lib # # Mandatory test, must succeed (see http://www.freetype.org/) # if test "x$enable_builtin_freetype" = "x" || \ test "x$enable_builtin_freetype" = "xno" ; then checking_msg "freetype-config" if `$cwhich freetype-config > /dev/null 2>&1` && test "x$host" = "x" ; then if test "x$macosx108" = "xyes" && (file -h `$cwhich freetype-config` | grep 'xstub' > /dev/null 2>&1 || test "x$enable_cocoa" = "xyes"); then enable_builtin_freetype="yes" if file -h `$cwhich freetype-config` | grep 'xstub' > /dev/null 2>&1 ; then result "XQuartz not installed" else result "using builtin freetype" fi else $cwhich freetype-config message "Checking for libfreetype version >= 9.3.0" ttf2_version=`freetype-config --version | \ tr '.' ' ' | \ awk 'BEGIN { FS = " "; } \ { printf "%d", ($''1 * 1000 + $''2) * 1000 + $''3;}'` # First good version is 9.3.0 if test $ttf2_version -lt 9003000 ; then result "no (`freetype-config --version`)" enable_builtin_freetype="yes" else result "ok" enable_builtin_freetype="no" fi fi else enable_builtin_freetype="yes" result "not found" fi fi message "Checking whether to build included libfreetype6" result "$enable_builtin_freetype" ###################################################################### # ### echo %%% libpcre (builtin or system) - Mandatory lib # # Mandatory test, must succeed (see http://www.pcre.org/) # if test "x$enable_builtin_pcre" = "x" || \ test "x$enable_builtin_pcre" = "xno" ; then checking_msg "pcre-config" if `$cwhich pcre-config > /dev/null 2>&1` && test "x$host" = "x" ; then $cwhich pcre-config message "Checking for libpcre version >= 3.9" pcre_version=`pcre-config --version | \ tr '.' ' ' | \ awk 'BEGIN { FS = " "; } \ { printf "%d", ($''1 * 1000 + $''2) * 1000 + $''3;}'` # First good version is 3.9 if test $pcre_version -lt 3009000 ; then result "no (`pcre-config --version`)" enable_builtin_pcre="yes" else result "ok" enable_builtin_pcre="no" fi else enable_builtin_pcre="yes" echo "not found" fi fi message "Checking whether to build included libpcre" result "$enable_builtin_pcre" ###################################################################### # ### echo %%% Use included zLib or use systems # if test "x$enable_builtin_zlib" = "xno" ; then check_header "zlib.h" "" \ $ZLIB ${ZLIB:+$ZLIB/include} \ ${finkdir:+$finkdir/include} \ /usr/local/include /usr/include/zlib /usr/local/include/zlib \ /opt/zlib/include /usr/include if test "x$found_dir" = "x" ; then enable_builtin_zlib=yes else zlibinc=$found_hdr zlibincdir=$found_dir fi check_library "libz" "$enable_shared" "" \ $ZLIB ${ZLIB:+$ZLIB/lib} \ /usr/local/zlib/lib /usr/local/lib \ /usr/lib/zlib /usr/local/lib/zlib /usr/zlib/lib /usr/lib \ /usr/zlib /usr/local/zlib /opt/zlib /opt/zlib/lib if test "x$found_lib" = "x" ; then zliblib="" zliblibdir="" enable_builtin_zlib="yes" else zliblib="$found_lib" zliblibdir="$found_dir" fi if test "x$zlibincdir" = "x" || test "x$zliblib" = "x"; then enable_builtin_zlib="yes" fi fi message "Checking whether to build included zlib" result "$enable_builtin_zlib" ###################################################################### # ### echo %%% Use included lzma or use systems # # (See http://tukaani.org/xz/) # if test "x$enable_builtin_lzma" = "xno" ; then check_header "lzma.h" "" \ $LZMA ${LZMA:+$LZMA/include} \ ${finkdir:+$finkdir/include} \ /usr/local/include /usr/include \ /usr/local/include/lzma /usr/include/lzma \ /opt/lzma/include if test "x$found_dir" = "x" ; then enable_builtin_lzma=yes else lzmainc=$found_hdr lzmaincdir=$found_dir fi check_library "liblzma" "$enable_shared" "" \ $LZMA ${LZMA:+$LZMA/lib} \ ${finkdir:+$finkdir/lib} \ /usr/local/lzma/lib /usr/local/lib \ /usr/lib/lzma /usr/local/lib/lzma /usr/lzma/lib /usr/lib \ /usr/lzma /usr/local/lzma /opt/lzma /opt/lzma/lib if test "x$found_lib" = "x" ; then lzmalib="" lzmalibdir="" enable_builtin_lzma="yes" else lzmalib="$found_lib" lzmalibdir="$found_dir" fi if test "x$lzmaincdir" = "x" || test "x$lzmalib" = "x"; then enable_builtin_lzma="yes" fi fi message "Checking whether to build included lzma" result "$enable_builtin_lzma" ###################################################################### # ### echo %%% OpenGL Support - Third party libraries # # (see mesa3d.org) # if test ! "x$enable_opengl" = "xno" && test ! "x$platform" = "xwin32" ; then # Check for OpenGL compatible include and library openglincdirs="$OPENGL ${OPENGL:+$OPENGL/include} \ ${finkdir:+$finkdir/include} \ /usr/include /usr/include/X11 /usr/X11/include \ /usr/X11R6/include /usr/local/include/X11 \ /usr/local/X11R6/include /usr/local/include \ /usr/include/Mesa /usr/local/include/Mesa /usr/Mesa/include \ /usr/local/Mesa/include /usr/Mesa /usr/local/Mesa /opt/Mesa \ /opt/Mesa/include /opt/graphics/OpenGL/include" check_header "GL/gl.h gl.h" "$openglincdir" $openglincdirs openglinc=$found_hdr openglincdir=$found_dir opengllibdirs="$OPENGL ${OPENGL:+$OPENGL/lib} \ ${finkdir:+$finkdir/lib} \ /usr/lib /usr/local/lib /usr/lib/X11 \ /usr/X11R6/lib /usr/local/lib/X11 /usr/local/X11R6/lib \ /usr/X11/lib /usr/lib/Mesa /usr/local/lib/Mesa /usr/Mesa/lib \ /usr/local/Mesa/lib /usr/Mesa /usr/local/Mesa /opt/Mesa \ /opt/Mesa/lib /opt/graphics/OpenGL/lib" keep=$opengllibdir check_library "libGL libMesaGL" "$enable_shared" \ "$opengllibdir" $opengllibdirs opengllib=$found_lib opengllibdir=$found_dir if test ! "x$macosx105" = "x" && test "x$macosx106" = "x" ; then # Mac OS X 10.5 problem opengllib="-dylib_file /usr/X11R6/lib/libGL.dylib:/usr/X11R6/lib/libGL.dylib -lGL" fi check_library "libGLU libMesaGLU" "$enable_shared" \ "$keep" $opengllibdirs openglulib=$found_lib openglulibdir=$found_dir if test "x$openglincdir" = "x" || \ test "x$opengllib" = "x" || \ test "x$openglulib" = "x" ; then enable_opengl="no" enable_builtin_glew="no" else check_header "GL/glew.h" "$glewincdir" $openglincdirs glewinc="$found_hdr" glewincdir="$found_dir" check_library "libGLEW" "$enable_shared" "$keep" $opengllibdirs glewlib="$found_lib" glewlibdir=$found_dir glewlibs="$glewlib" if test "x$glewincdir" = "x" || test "x$glewlib" = "x" || test "x$enable_builtin_glew_explicit" = "xyes" ; then enable_builtin_glew="yes" glewincdir="include" glewlibdir="-Llib" glewlibs="-lGLEW" fi message "Checking whether to build included GLEW" result "$enable_builtin_glew" fi fi check_explicit "$enable_opengl" "$enable_opengl_explicit" \ "Explicitly required OpenGL dependencies not fulfilled" ###################################################################### # ### echo %%% libftgl (builtin or system) - Needed if OpenGL enabled # # Mandatory test, must succeed # (see http://homepages.paradise.net.nz/henryj/code/index.html#FTGL) # if test ! "x$enable_opengl" = "xno" && test ! "x$platform" = "xwin32" ; then ftglincdir=include ftgllibdir=-Llib ftgllibs=-lFTGL if test "x$enable_builtin_ftgl" = "x" || \ test "x$enable_builtin_ftgl" = "xno" ; then # check if we have pkg-config checking_msg "pkg-config" if `$cwhich pkg-config > /dev/null 2>&1` ; then $cwhich pkg-config message "Checking for libftgl" if pkg-config --exists ftgl ; then result "ok" message "Checking for ftgl version > 2.1.2" ftgl_version=`pkg-config --modversion ftgl | \ tr '.' ' ' | \ awk 'BEGIN { FS = " "; } \ { printf "%d", ($''1 * 1000 + $''2) * 1000 + $''3;}'` # Use FTGL/ftgl.h when > 2.1.2 if test $ftgl_version -gt 2001002 ; then result "ok" ftglincdir=`pkg-config --cflags-only-I ftgl | sed 's/-I//g'` ftgllibs=`pkg-config --libs-only-l ftgl` ftgllibdir=`pkg-config --libs-only-L ftgl` enable_builtin_ftgl="no" else enable_builtin_ftgl="yes" result "no (`pkg-config --modversion ftgl`)" fi else enable_builtin_ftgl="yes" result "no" fi else enable_builtin_ftgl="yes" echo "not found" fi fi message "Checking whether to build included libftgl" result "$enable_builtin_ftgl" fi ###################################################################### # ### echo %%% OpenGL support on Windoze # # On win32 we always have OpenGL available # if test "x$platform" = "xwin32"; then enable_opengl="yes" openglincdir="include" enable_builtin_glew="yes" glewincdir=include glewlibdir= glewlibs=lib/libGLEW.lib enable_builtin_ftgl="yes" ftglincdir=include ftgllibdir= ftgllibs=lib/libFTGL.lib fi ###################################################################### # ### echo %%% Alternative Memory Allocator Support - Third party libraries # if test ! "x$enable_alloc" = "xno"; then # Check for alternative memory allocator check_library "$alloclib" "$enable_shared" "$alloclibdir" \ /usr/lib /usr/local/lib alloclib=$found_lib alloclibdir=$found_dir if test "x$alloclib" = "x"; then alloclibdir="" enable_alloc="no" fi fi check_explicit "$enable_alloc" "$enable_alloc_explicit" \ "Explicitly required allocator dependencies not fulfilled" ###################################################################### # ### echo %%% MySQL Support - Third party libraries # # (See mysql.org) # # If the user has set the flags "--disable-mysql", we don't check for # MySQL at all. # if test ! "x$enable_mysql" = "xno"; then # Check for MySQL include and library checking_msg "mysql_config" mysql_config=`$cwhich mysql_config 2> /dev/null` if test ! "x$mysql_config" = "x" && test -x "$mysql_config" && \ test "x$mysqlincdir" = "x" && test "x$mysqllibdir" = "x" && \ test ! "x$platform" = "xwin32" && test "x$host" = "x" ; then echo $mysql_config # we found mysql_config - now check the version number message "Checking for libmysqlclient version >= 3.23.*" mysql_version=`$mysql_config --version | awk 'BEGIN { FS="." } { printf "%d", $1 * 1000 + $2 }'` if test $mysql_version -lt 3023 ; then result "no (`$mysql_config --version`)" enable_mysql="no" mysqllibdir="" else if test "x$arch" = "xlinux" && mysql_config --libs | grep 'lib64/mysql' > /dev/null 2>& 1; then result "no (lib64 version found)" enable_mysql="no" mysqllibdir="" else result "ok" mysqllib=`$mysql_config --libs | sed -e s/\'//g` mysqlincdir=`$mysql_config --cflags | sed -e 's,^.*-I\([^ ]*\).*$,\1,' -e s/\'//g` mysqllibdir="" check_header "mysql.h" "" $mysqlincdir if test "x$found_hdr" = "x"; then enable_mysql="no" fi fi fi else result "not found" # fall back in case mysql_config is not found check_header "mysql.h" "$mysqlincdir" \ $MYSQL ${MYSQL:+$MYSQL/include} \ ${MYSQL:+$MYSQL/include/mysql} \ ${finkdir:+$finkdir/include/mysql} \ /usr/local/include \ /usr/local/include/mysql /usr/local/mysql /usr/local/mysql/include \ /opt/mysql /opt/mysql/include \ /usr/include /usr/include/mysql /usr/mysql /usr/mysql/include mysqlinc=$found_hdr mysqlincdir=$found_dir mysqlclientlibs="libmysqlclient mysqlclient" if test "x$enable_thread" = "xyes"; then mysqlclientlibs="libmysqlclient_r $mysqlclientlibs" fi check_library "$mysqlclientlibs" "$enable_shared" "$mysqllibdir" \ $MYSQL ${MYSQL:+$MYSQL/lib} ${MYSQL:+$MYSQL/lib/mysql} \ ${finkdir:+$finkdir/lib/mysql} \ /usr/local/lib \ /usr/local/lib/mysql /usr/local/mysql /usr/local/mysql/lib \ /opt/mysql /opt/mysql/lib \ /usr/lib /usr/lib/mysql /usr/mysql /usr/mysql/lib mysqllib=$found_lib mysqllibdir=$found_dir # on linux, but maybe also other systems, explicitly add libz # (formally only needed when linking against the static libmysqlclient.a) if test ! "x$mysqllib" = "x" ; then case $platform in linux) mysqllib="$mysqllib -lz" ;; win32) mysqllib="`echo $mysqllib | sed 's/mysqlclient/libmysql/'` $mysqllib" ;; esac fi if test "x$mysqlincdir" = "x" || test "x$mysqllib" = "x"; then enable_mysql="no" fi fi fi check_explicit "$enable_mysql" "$enable_mysql_explicit" \ "Explicitly required MySQL dependencies not fulfilled" ###################################################################### # ### echo %%% Oracle Support - Third party libraries # # (See oracle.com) # # If the user has set the flags "--disable-oracle", we don't check for # Oracle at all. # if test ! "x$enable_oracle" = "xno"; then # Check for oracle include and library check_header "occi.h" "$oracleincdir" \ $ORACLE ${ORACLE:+ORACLE/include} \ ${ORACLE:+$ORACLE/sdk/include} $ORACLEINCDIR \ /usr/local/include /usr/include /usr/include/oracle/*/client oracleinc=$found_hdr oracleincdir=$found_dir keeplibdir=$oraclelibdir check_library "libclntsh oci" "$enable_shared" "$oraclelibdir" \ $ORACLE ${ORACLE:+$ORACLE/lib} $ORACLELIBDIR \ /usr/local/lib /usr/lib /usr/lib/oracle/*/client/lib oraclelib=$found_lib oraclelibdir=$found_dir check_library "libocci oraocci10" "$enable_shared" "$keeplibdir" \ $ORACLE ${ORACLE:+$ORACLE/lib} $ORACLELIBDIR \ /usr/local/lib /usr/lib /usr/lib/oracle/*/client/lib oraclelib="$oraclelib $found_lib" # space in "x " is intentional if test "x$oracleincdir" = "x" || test "x$oraclelib" = "x "; then enable_oracle="no" fi fi check_explicit "$enable_oracle" "$enable_oracle_explicit" \ "Explicitly required Oracle dependencies not fulfilled" ###################################################################### # ### echo %%% PostgreSQL Support - Third party libraries # # (See postgresql.org) # # If the user has set the flags "--disable-pgsql", we don't check for # PostgreSQL at all. # if test ! "x$enable_pgsql" = "xno"; then # Check for PgSQL include and library check_header "libpq-fe.h" "$pgsqlincdir" \ $PGSQL ${PGSQL:+$PGSQL/include} \ ${finkdir:+$finkdir/include} \ /usr/include /usr/local/include /usr/local/pgsql/include \ /usr/include/pgsql /usr/include/postgresql \ /usr/include/postgresql/8.0 /usr/pgsql/include \ /usr/local/include/pgsql /usr/local/include/postgresql \ /usr/include/postgresql/8.0 /usr/pgsql /usr/local/pgsql \ /opt/pgsql /opt/pgsql/include pgsqlinc=$found_hdr pgsqlincdir=$found_dir check_library "libpq" "$enable_shared" "$pgsqllibdir" \ $PGSQL ${PGSQL:+$PGSQL/lib} \ ${finkdir:+$finkdir/lib} \ /usr/local/pgsql/lib /usr/local/lib \ /usr/lib/pgsql /usr/local/lib/pgsql /usr/pgsql/lib /usr/lib \ /usr/pgsql /usr/local/pgsql /opt/pgsql /opt/pgsql/lib pgsqllib=$found_lib pgsqllibdir=$found_dir if test "x$pgsqlincdir" = "x" || test "x$pgsqllib" = "x"; then enable_pgsql="no" fi fi check_explicit "$enable_pgsql" "$enable_pgsql_explicit" \ "Explicitly required PostGreSQL dependencies not fulfilled" ###################################################################### # ### echo %%% SapDB/MaxDB Support - Third party libraries # # (See www.sapdb.org or http://www.mysql.com/products/maxdb) # # If the user has set the flags "--disable-sapdb", we don't check for # SapDB at all. # if test ! "x$enable_sapdb" = "xno"; then # Check for SapDB include and library check_header "sql.h" "$sapdbincdir" \ $SAPDB ${SAPDB:+$SAPDB/include} \ ${finkdir:+$finkdir/include} \ /opt/sapdb/interfaces/odbc/incl /usr/sapdb/interfaces/odbc/incl \ /usr/sapdb/include /usr/local/sapdb/interfaces/odbc/incl \ /usr/sapdb/web/incl /usr/include/sapdb /usr/include/maxdb \ /usr/local/include/sapdb /usr/local/include/maxdb \ /usr/local/sapdb/include /usr/local/sapdb/web/incl /usr/sapdb \ /usr/local/sapdb /opt/sapdb /opt/sapdb/include /opt/sapdb/web/incl sapdbinc=$found_hdr sapdbincdir=$found_dir check_library "libsqlod" "$enable_shared" "$sapdblibdir" \ $SAPDB ${SAPDB:+$SAPDB/lib} \ ${finkdir:+$finkdir/lib} \ /opt/sapdb/interfaces/odbc/lib \ /usr/sapdb/interfaces/odbc/lib /usr/sapdb/lib \ /usr/local/sapdb/interfaces/odbc/lib /usr/local/sapdb/lib \ /usr/lib/sapdb /usr/local/lib/sapdb /usr/sapdb/lib \ /usr/local/sapdb/lib /usr/sapdb /usr/local/sapdb \ /opt/sapdb /opt/sapdb/lib /usr/sapdb/web/lib \ /usr/local/sapdb/web/lib /opt/sapdb/web/lib \ /usr/lib /usr/local/lib sapdblib=$found_lib sapdblibdir=$found_dir if test "x$sapdbincdir" = "x" || test "x$sapdblib" = "x"; then enable_sapdb="no" fi fi check_explicit "$enable_sapdb" "$enable_sapdb_explicit" \ "Explicitly required SapDB dependencies not fulfilled" ###################################################################### # ### echo %%% ODBC Support - Third party libraries # # (See unixodbc.org or iodbc.org) # # If the user has set the flags "--disable-odbc", we don't check for # ODBC at all. # if test ! "x$enable_odbc" = "xno"; then # Check for odbc include and library if test "x$platform" = xwin32 ; then odbcinc="sqlext.h" odbcincdir="" odbclib="odbc32.lib" odbclibdir="" enable_odbc="yes" else check_header "sqlext.h" "$odbcincdir" \ $ODBC ${ODBC:+$ODBC/include} $ODBCINCDIR \ ${finkdir:+$finkdir/include} \ /usr/local/include /usr/include odbcinc=$found_hdr odbcincdir=$found_dir check_library "libiodbc libodbc odbc32" "$enable_shared" "$odbclibdir" \ $ODBC ${ODBC:+$ODBC/lib} $ODBCLIBDIR \ ${finkdir:+$finkdir/lib} \ /usr/local/lib /usr/lib odbclib=$found_lib odbclibdir=$found_dir if test "x$odbcincdir" = "x" || test "x$odbclib" = "x"; then enable_odbc="no" fi fi fi check_explicit "$enable_odbc" "$enable_odbc_explicit" \ "Explicitly required ODBC dependencies not fulfilled" ###################################################################### # ### echo %%% Qt Support - Optional alternative graphics backend # # If the user has not set the flags "--enable-qt" or "--enable-qtgsi", # we don't check for Qt at all. # check_qtvers() { qttestdir=$1 ; shift qtverneed=$1 ; shift qttoonew=$1 ; shift message "Checking for $qtverneed <= Qt version < $qttoonew " logmsg " grep '# *define *QT_VERSION_STR *' $qttestdir/qglobal.h" qtverstr=`grep "# *define *QT_VERSION_STR *" $qttestdir/qglobal.h | \ sed '-e s/[^"]*"//' -e 's/".*$//' 2>> $logfile` qtvers=0 if test $? -eq 0 ; then logmsg " Got Qt version $qtverstr" qtgot=`echo $qtverstr | \ awk 'BEGIN {FS="."} {printf "%d", ((($1*2^8)+$2)*2^8)+$3; }'` qtneed=`echo $qtverneed | \ awk 'BEGIN {FS="."}{ printf "%d", (($1*2^8)+$2)*2^8+$3; }'` qtnew=`echo $qttoonew | \ awk 'BEGIN {FS="."}{ printf "%d", (($1*2^8)+$2)*2^8+$3; }'` logmsg " Got $qtgot, min $qtneed, max $qtnew" if test $qtgot -lt $qtneed ; then res="no" resprint="no (found version $qtverstr)" elif test $qtgot -ge $qtnew; then res="no" resprint="no (found version $qtverstr)" else res="$qtverstr" resprint="$res" qtvers=`echo $qtverstr | awk 'BEGIN {FS="."} {print $1}'` fi else res="no" resprint="$res" fi result $resprint } if test ! "x$enable_qt" = "xno" || \ test ! "x$enable_qtgsi" = "xno"; then # Check for Qt include and library if test ! "x$QTDIR" = "x"; then # The user asked for a specific "QTDIR" ... search ONLY in there check_header "Qt/qglobal.h" "$qtincdir" $QTDIR ${QTDIR:+$QTDIR/include} else check_header "Qt/qglobal.h" "$qtincdir" \ /usr/local/include/ /usr/local/qt/include \ /usr/include /usr/include/qt4 /usr/lib/qt4/include fi qtvers=0 if test ! "x$found_hdr" = "x"; then qtvers=4 qt4="yes" qtinc=$found_hdr qtmainincdir=$found_dir qtincdir=$qtmainincdir for i in `ls -d $qtmainincdir/Qt*` ; do if test -d $i ; then qtincdir="$qtincdir $i" fi done qtverneed="4.3.0" qttoonew="5.0.0" qttestdir=$qtmainincdir/../src/corelib/global if test ! -d $qttestdir ; then qttestdir=$qtmainincdir/Qt fi check_qtvers "$qttestdir" $qtverneed $qttoonew if test $qtvers -eq 4 ; then qt4suffix="4" if test "x$enable_winrtdebug" = "xyes"; then qt4suffix="d4" fi check_library "libQtCore QtCore QtCore$qt4suffix QtCore4" \ "$enable_shared" \ "$qtlibdir" $QTDIR ${QTDIR:+$QTDIR/lib} /usr/local/lib \ /usr/local/qt/lib /usr/lib /usr/qt/lib /usr/lib/qt4 qtlib=$found_lib qtlibdir=$found_dir check_library "libQtGui QtGui QtGui$qt4suffix QtGui4" \ "$enable_shared" "$found_raw_dir" "" qtlib="$qtlib $found_lib" check_library "libQt3Support Qt3Support Qt3Support$qt4suffix Qt3Support4" \ "$enable_shared" "$found_raw_dir" "" qtlib="$qtlib $found_lib" else qtinc= qtmainincdir= qtincdir= fi fi message "Checking for moc or moc.exe" for i in $QTDIR $QTDIR/bin "$mocdir" /usr/local/bin /usr/local/qt/bin \ /usr/bin /usr/qt4/bin /usr/lib/qt4/bin /usr/share/qt4/bin ; do logmsg " Checking for $qtmocexe in $i" for j in $i/moc-qt${qtvers} $i/moc-qt${qtvers}.exe $i/moc $i/moc.exe ; do if test -x $j ; then moc_vers=`$j -v 2>&1 | \ sed -e 's/.*(Qt //' -e 's/\.[0-9]*\.[0-9][-0-9a-z]*)//'` if test ! "$moc_vers" = "$qtvers" ; then logmsg "$j: moc version ${moc_vers} does not match Qt version ${qtvers}" continue fi qtmocexe=$j logmsg " $qtmocexe is executable" break fi done if test ! "x$qtmocexe" = "x" ; then break ; fi done # Correct path for win32 if test "x$platform" = "xwin32"; then if test ! "x$qtmocexe" = "x" ; then qtmocexe=`cygpath -u $qtmocexe` fi fi # we can pick the wrong moc this way -- fi if test ! "x$qtmocexe" = "x" ; then result "$qtmocexe" if test "x$platform" = "xwin32"; then qtmocexe="$top_srcdir/build/win/qtmoc.sh $qtmocexe" fi else result "no" fi if test "x$qtincdir" = "x" || test "x$qtlib" = "x" || \ test "x$qtmocexe" = "x" || test $qtvers -eq 0 ; then enable_qt="no" enable_qtgsi="no" fi fi check_explicit "$enable_qt" "$enable_qt_explicit" \ "Explicitly required Qt dependencies not fulfilled" ###################################################################### # ### echo %%% RFIO Support - Third party libraries # # (See http://savannah.cern.ch/files/?group=castor) # # Check for rfio_api.h of CASTOR 2 and librfio, libdpm or libshift # shiftold="" if test ! "x$enable_rfio" = "xno" ; then # Check for RFIO include and library keepincdir=$shiftincdir check_header "rfio_api.h" "$shiftincdir" \ $RFIO ${RFIO:+$RFIO/include} \ ${RFIO:+$RFIO/include/shift} ${RFIO:+$RFIO/h} \ /cern/pro/include /cern/new/include /cern/old/include \ /opt/shift/include /usr/local/shift/inlcude /usr/include/shift \ /usr/local/include/shift /usr/include /usr/local/include shiftinc=$found_hdr shiftincdir=$found_dir if test ! "x$shiftincdir" = "x"; then message "Checking whether rfio_fchmod declared in $shiftinc" logmsg " grep rfio_fchmod $shiftincdir/$shiftinc" if `grep rfio_fchmod $shiftincdir/$shiftinc >> $logfile 2>&1` ; then result "yes" else shiftincdir="" shiftold="yes" result "no" result "### Found old version of libshift, please uprade to >=1.5.2" fi fi check_library "librfio libdpm libcastorrfio libshift shiftmd shift" "$enable_shared" \ "$shiftlibdir" \ $RFIO ${RFIO:+$RFIO/lib} /cern/pro/lib /cern/new/lib /cern/old/lib \ /opt/shift/lib /usr/local/shift/lib /usr/lib/shift \ /usr/local/lib/shift /usr/lib /usr/local/lib shiftlib=$found_lib shiftlibdir=$found_dir if test "x$shiftincdir" = "x" || test "x$shiftlib" = "x"; then enable_rfio="no" else case $shiftlib in *dpm) shiftlib="$shiftlib -llcgdm" ;; *castorrfio) shiftlib="$shiftlib -lcastorcommon" ;; esac case $platform in linux | macosx) for i in "" -ladns ; do check_link "$shiftlib $i" "$shiftlibdir" rfio_fchmod if test $link_result -eq 1 ; then shiftlib="$shiftlib $i" ; break ; fi done message "Checking for symbol rfio_fchmod" if test $link_result -ne 1 ; then enable_rfio="no" echo "no, disabling rfio" else echo "yes" fi ;; solaris) shiftlib="$shiftlib -lposix4" ;; win32) shiftincdir="$shiftincdir $shiftincdir/../win32" shiftlib="$shiftlib WSock32.lib Ws2_32.lib" ;; esac fi fi check_explicit "$enable_rfio" "$enable_rfio_explicit" \ "Explicitly required RFIO dependencies not fulfilled" ###################################################################### # ### echo %%% CASTOR Support - Third party libraries # # (See http://savannah.cern.ch/files/?group=castor) # # Check for rfio_api.h, stager_api.h for CASTOR 2 and libshift # castorold="" if test ! "x$enable_castor" = "xno" ; then # Check for Castor include and library keepincdir=$castorincdir check_header "rfio_api.h" "$castorincdir" \ $CASTOR ${CASTOR:+$CASTOR/include} \ ${CASTOR:+$CASTOR/include/shift} ${CASTOR:+$CASTOR/h} \ /cern/pro/include /cern/new/include /cern/old/include \ /opt/shift/include /usr/local/shift/inlcude /usr/include/shift \ /usr/local/include/shift /usr/include /usr/local/include castorinc=$found_hdr castorincdir=$found_dir if test ! "x$castorincdir" = "x"; then message "Checking whether rfio_fchmod declared in $castorinc" logmsg " grep rfio_fchmod $castorincdir/$castorinc" if `grep rfio_fchmod $castorincdir/$castorinc >> $logfile 2>&1` ; then result "yes" else castorincdir="" castorold="yes" result "no" result "### Found old version of libshift, please uprade to >=1.5.2" fi fi check_header "stager_api.h" "$keepincdir" \ $CASTOR ${CASTOR:+$CASTOR/include} \ ${CASTOR:+$CASTOR/include/shift} ${CASTOR:+$CASTOR/h} \ /cern/pro/include /cern/new/include /cern/old/include \ /opt/shift/include /usr/local/shift/inlcude /usr/include/shift \ /usr/local/include/shift /usr/include /usr/local/include stagerinc=$found_hdr if test ! "x$stagerinc" = "x"; then castorcflags=-DR__CASTOR2 # check for Castor >= 2.1.0 message "Checking for Castor version being >= 2.1.0" castor_version=`grep "define BASEVERSION" $castorincdir/patchlevel.h | sed 's/^.*"\([0-9]\.[0-9]\.[0-9]*\)"/\1/' | awk 'BEGIN { FS="." } { printf "%d", $1 * 1000000 + $2 * 1000 + $3}'` if test $castor_version -lt 2001000; then base_vers=`grep "define BASEVERSION" $castorincdir/patchlevel.h | sed 's/^.*"\([0-9]\.[0-9]\.[0-9]*\)"/\1/' | awk '{ printf $1}'` patch_level=`grep "define PATCHLEVEL" $castorincdir/patchlevel.h | awk '{ printf $3}'` result "no, $base_vers-$patch_level" castorincdir="" else result "ok" fi fi check_library "libcastorrfio libshift shiftmd shift" "$enable_shared" "$castorlibdir" \ $CASTOR ${CASTOR:+$CASTOR/lib} /cern/pro/lib /cern/new/lib \ /cern/old/lib /opt/shift/lib /usr/local/shift/lib /usr/lib/shift \ /usr/local/lib/shift /usr/lib /usr/local/lib castorlib=$found_lib castorlibdir=$found_dir if test "x$castorincdir" = "x" || test "x$castorlib" = "x"; then enable_castor="no" else case $castorlib in *castorrfio) castorlib="$castorlib -lcastorclient -lcastorns -lcastorcommon" ;; esac case $platform in linux | macosx) for i in "" -ladns ; do check_link "$castorlib $i" "$castorlibdir" rfio_fchmod if test $link_result -eq 1 ; then castorlib="$castorlib $i" ; break ; fi done message "Checking for symbol rfio_fchmod" if test $link_result -ne 1 ; then enable_castor="no" echo "no, disabling castor" else echo "yes" fi ;; solaris) castorlib="$castorlib -lposix4" ;; win32) castorincdir="$castorincdir $castorincdir/../win32" castorlib="$castorlib WSock32.lib Ws2_32.lib" ;; esac fi fi check_explicit "$enable_castor" "$enable_castor_explicit" \ "Explicitly required Castor dependencies not fulfilled" ###################################################################### # ### echo %%% GFAL Support - Third party libraries # # (See http://grid-deployment.web.cern.ch/grid-deployment/gis/GFAL/gfal.3.html) # # If the user has set the flags "--disable-gfal", we don't check for # GFAL at all. # if test ! "x$enable_gfal" = "xno"; then # Check for GFAL include and library check_header "gfal_api.h" "$gfalincdir" \ $GFAL ${GFAL:+$GFAL/include} \ /opt/lcg/include /opt/gfal/include /usr/local/lcg/include \ /usr/local/gfal/include gfalinc=$found_hdr gfalincdir=$found_dir check_library "libgfal" "$enable_shared" "$gfallibdir" \ $GFAL ${GFAL:+$GFAL/lib} \ /opt/lcg/lib /opt/gfal/lib /usr/local/lcg/lib \ /usr/local/gfal/lib gfallib=$found_lib gfallibdir=$found_dir check_header "gfal_srm_ifce_types.h" "$srmifceincdir" \ /opt/lcg/include /opt/srm-ifce/include /usr/local/lcg/include \ /usr/local/srm-ifce/include srmifceinc=$found_hdr srmifceincdir=$found_dir if test "x$gfalincdir" = "x" || test "x$gfallib" = "x"; then enable_gfal="no" fi fi check_explicit "$enable_gfal" "$enable_gfal_explicit" \ "Explicitly required GFAL dependencies not fulfilled" ###################################################################### # ### echo %%% Monalisa Support - Third party libraries # # (See http://monalisa.cacr.caltech.edu/monalisa__Download__ApMon.html) # # If the user has set the flags "--disable-monalisa", we don't check for # Monalisa at all. # if test ! "x$enable_monalisa" = "xno"; then # Check for Monalisa include and library check_header "ApMon.h" "$monalisaincdir" \ $MONALISA ${MONALISA:+$MONALISA/include} \ /usr/local/include /opt/alien/api/include /opt/monalisa/include \ /usr/include monalisainc=$found_hdr monalisaincdir=$found_dir check_library "libapmoncpp" "$enable_shared" "$monalisalibdir" \ $MONALISA ${MONALISA:+$MONALISA/lib} ${MONALISA:+$MONALISA/.libs} \ /usr/local/lib /opt/alien/api/lib /opt/monalisa/lib /usr/lib monalisalib=$found_lib monalisalibdir=$found_dir if test "x$monalisaincdir" = "x" || test "x$monalisalib" = "x"; then enable_monalisa="no" fi fi check_explicit "$enable_monalisa" "$enable_monalisa_explicit" \ "Explicitly required MonaLisa dependencies not fulfilled" ###################################################################### # ### echo %%% FFTW3 Support - Third party libraries # # (See http://www.fftw.org) # # If the user has set the flags "--disable-fftw3", we don't check for # FFTW3 at all. # if test ! "x$enable_fftw3" = "xno"; then # Check for FFTW3 include and library check_header "fftw3.h" "$fftw3incdir" \ $FFTW3 ${FFTW3:+$FFTW3/include} ${FFTW3:+$FFTW3/api} \ ${finkdir:+$finkdir/include} \ /usr/local/include /usr/include /opt/fftw3/include fftw3inc=$found_hdr fftw3incdir=$found_dir # At this time, libfftw3.a should always be prefered over .so, # to avoid forcing users to install fftw3. check_library "libfftw3 libfftw3-3" "no" "$fftw3libdir" \ $FFTW3 ${FFTW3:+$FFTW3/lib} ${FFTW3:+$FFTW3/.libs} \ ${finkdir:+$finkdir/lib} \ /usr/local/lib /usr/lib /opt/fftw3/lib fftw3lib=$found_lib fftw3libdir=$found_dir if test "x$fftw3incdir" = "x" || test "x$fftw3lib" = "x"; then enable_fftw3="no" fi fi check_explicit "$enable_fftw3" "$enable_fftw3_explicit" \ "Explicitly required FFT in the West dependencies not fulfilled" ###################################################################### # ### echo %%% FITSIO Support - Third party libraries # # (See http://heasarc.gsfc.nasa.gov/fitsio/) # # If the user has set the flags "--disable-fitsio", we don't check for # FITSIO at all. # if test ! "x$enable_fitsio" = "xno"; then # Check for cfitsio include and library check_header "fitsio.h" "$cfitsioincdir" \ $CFITSIO ${CFITSIO:+$CFITSIO/include} \ ${finkdir:+$finkdir/include} \ /usr/local/include /usr/include /usr/include/cfitsio \ /opt/cfitsio/include cfitsioinc=$found_hdr cfitsioincdir=$found_dir # At this time, libcfitsio.a should always be prefered over .so, # to avoid forcing users to install cfitsio. check_library "libcfitsio cfitsio" "no" "$cfitsiolibdir" \ $CFITSIO ${CFITSIO:+$CFITSIO/lib} ${CFITSIO:+$CFITSIO/.libs} \ ${finkdir:+$finkdir/lib} \ /usr/local/lib /usr/lib /opt/cfitsio/lib cfitsiolib=$found_lib cfitsiolibdir=$found_dir if test "x$cfitsioincdir" = "x" || test "x$cfitsiolib" = "x"; then enable_fitsio="no" else case $platform in linux) cfitsiolib="$cfitsiolib -lpthread -lz" ;; esac fi fi check_explicit "$enable_fitsio" "$enable_fitsio_explicit" \ "Explicitly required cfitsio dependencies not fulfilled" ###################################################################### # ### echo %%% graphviz Support - Third party libraries # # (See http://www.graphviz.org/) # # If the user has set the flags "--disable-gviz", we don't check for # graphviz at all. # if test ! "x$enable_gviz" = "xno"; then # Check for graphviz include and library check_header "gvc.h" "$gvizincdir" \ $GVIZ ${GVIZ:+$GVIZ/include/graphviz} ${GVIZ:+$GVIZ/include} \ ${finkdir:+$finkdir/include/graphviz} \ /usr/local/include/graphviz /usr/include/graphviz gvizinc=$found_hdr gvizincdir=$found_dir # At this time, libgvplugin_core.a should always be prefered over .so, # to avoid forcing users to install graphviz. check_library "libgvc gvc" "no" "$gvizlibdir" \ $GVIZ ${GVIZ:+$GVIZ/lib/graphviz} ${GVIZ:+$GVIZ/lib} ${GVIZ:+$GVIZ/.libs} \ ${finkdir:+$finkdir/lib} \ /usr/local/lib /usr/lib gvizlib1=$found_lib gvizlib1raw=$found_raw_lib gvizlibir=$found_dir check_library "libgraph graph libcgraph cgraph" "no" "$gvizlibdir" \ $GVIZ ${GVIZ:+$GVIZ/lib/graphviz} ${GVIZ:+$GVIZ/lib} ${GVIZ:+$GVIZ/.libs} \ ${finkdir:+$finkdir/lib} \ /usr/local/lib /usr/lib gvizlib2=$found_lib check_library "libcdt cdt" "no" "$gvizlibdir" \ $GVIZ ${GVIZ:+$GVIZ/lib/graphviz} ${GVIZ:+$GVIZ/lib} ${GVIZ:+$GVIZ/.libs} \ ${finkdir:+$finkdir/lib} \ /usr/local/lib /usr/lib gvizlib3=$found_lib check_library "libpathplan pathplan" "no" "$gvizlibdir" \ $GVIZ ${GVIZ:+$GVIZ/lib/graphviz} ${GVIZ:+$GVIZ/lib} ${GVIZ:+$GVIZ/.libs} \ ${finkdir:+$finkdir/lib} \ /usr/local/lib /usr/lib gvizlib4=$found_lib check_library "libexpat expat" "$enable_shared" "$gvizlibdir" \ $GVIZ ${GVIZ:+$GVIZ/lib/graphviz} ${GVIZ:+$GVIZ/lib} ${GVIZ:+$GVIZ/.libs} \ ${finkdir:+$finkdir/lib} \ /usr/local/lib /usr/lib gvizlib5=$found_lib gvizlibdir5=$found_dir # the plugin libraries are in the directory "$gvizlibdir"/graphviz gvizlibpdir="" if test "x$gvizlibdir" != "x" ; then gvizlibpdir="$gvizlibdir"/graphviz fi if test "x$platform" = "xwin32"; then gvizlibpdir="$gvizlibdir" fi check_library "libgvplugin_dot_layout gvplugin_dot_layout" "no" "$gvizlibpdir" \ $GVIZ ${GVIZ:+$GVIZ/lib/graphviz} ${GVIZ:+$GVIZ/lib} ${GVIZ:+$GVIZ/.libs} \ ${finkdir:+$finkdir/lib/graphviz} \ /usr/local/lib/graphviz /usr/lib/graphviz gvizlibp1=$found_lib gvizlibpdir=$found_dir if test "x$gvizincdir" = "x" || test "x$gvizlib1" = "x" || test "x$gvizlib2" = "x" || test "x$gvizlib3" = "x" || test "x$gvizlib4" = "x" ; then enable_gviz="no" else for gvsharedext in .so .sl .dylib .dll.a; do gvizshared="$gvizshared`echo $gvizlib1raw | grep '\\'$gvsharedext'\$'`" done if test "x$gvizshared" = "x" ; then if test "x$gvizlibp1" = "x" ; then enable_gviz="no" else gvizcflags=-DGVIZ_STATIC gvizlib="$gvizlibp1 $gvizlib1 $gvizlib2 $gvizlib3 $gvizlib4 $gvizlibdir5 $gvizlib5 -lz" fi else gvizlib="$gvizlibir $gvizlib1 $gvizlib2 $gvizlib3 $gvizlib4 $gvizlibdir5 $gvizlib5 -lz" fi if test "x$platform" = "xwin32"; then gvizcflags= gvizlib="$gvizlibp1 $gvizlib1 $gvizlib2 $gvizlib3 $gvizlib4" else if test "x$gvizlib5" = "x" ; then enable_gviz="no" gvizlib= gvizcflags= fi fi fi fi check_explicit "$enable_gviz" "$enable_gviz_explicit" \ "Explicitly required graphviz dependencies not fulfilled" ###################################################################### # ### echo %%% Pythia6 Usage - Third party libraries # # (See http://root.cern.ch and Lund) # # Check for libPythia6 # if test ! "x$enable_pythia6" = "xno" ; then if test "x$pythia6uscore" = "xDOUBLE" || \ test "x$pythia6uscore" = "xSINGLE" || \ test "x$pythia6uscore" = "xNO" ; then pythia6cppflags=-DPYTHIA6_${pythia6uscore}_UNDERSCORE pythia6lib= pythia6dir= result "Using custom pythia6 library with $pythia6uscore underscore" else check_library "libPythia6" "$enable_shared" "$pythia6libdir" \ $PYTHIA6 ${PYTHIA6:+$PYTHIA6/lib} \ /cern/pro/lib /opt/pythia /opt/pythia6 \ /usr/lib/pythia /usr/local/lib/pythia /usr/lib/pythia6 \ /usr/local/lib/pythia6 /usr/lib /usr/local/lib pythia6lib=$found_lib pythia6libdir=$found_dir if test "x$pythia6lib" = "x" ; then enable_pythia6=no else check_symbol pythia6_common_block_address__ \ "$found_lib" "$found_dir" if test $found_symbol -eq 1 ; then pythia6cppflags=-DPYTHIA6_DOUBLE_UNDERSCORE else check_symbol pythia6_common_block_address_ \ "$found_lib" "$found_dir" if test $found_symbol -eq 1 ; then pythia6cppflags=-DPYTHIA6_SINGLE_UNDERSCORE else check_symbol pythia6_common_address \ "$found_lib" "$found_dir" if test $found_symbol -eq 1 ; then pythia6cppflags=-DPYTHIA6_NO_UNDERSCORE else result " didn't find pythia6_common_block_address[_]* in $found_lib" enable_pythia6=no fi fi fi if test "x$platform" = "xmacosx" ; then check_symbol intel_cpu_indicator "$found_lib" "$found_dir" if test $found_symbol -eq 1 ; then pythia6lib="$pythia6lib -L`$cwhich ifort | sed -e 's|bin/ifort|lib|'` -lifcore -lirc -limf" fi fi fi fi fi check_explicit "$enable_pythia6" "$enable_pythia6_explicit" \ "Explicitly required Pythia6 dependencies not fulfilled" ###################################################################### # ### echo %%% Pythia8 Usage - Third party libraries # # (See http://root.cern.ch and Lund) # # Check for libpythia8 # if test ! "x$enable_pythia8" = "xno" ; then # Check for PYTHIA8 include and library check_header "Pythia.h" "$pythia8incdir" \ $PYTHIA8 ${PYTHIA8:+$PYTHIA8/include} \ /opt/pythia8/include /usr/local/include /usr/include /usr/include/pythia pythia8incdir=$found_dir check_library "libpythia8" "$enable_shared" "$pythia8libdir" \ $PYTHIA8 ${PYTHIA8:+$PYTHIA8/lib} \ /opt/pythia8/lib /usr/local/lib /usr/lib pythia8lib=$found_lib pythia8libdir=$found_dir if test "x$pythia8incdir" = "x" || test "x$pythia8lib" = "x"; then enable_pythia8=no fi fi check_explicit "$enable_pythia8" "$enable_pythia8_explicit" \ "Explicitly required Pythia8 dependencies not fulfilled" ###################################################################### # ### echo %%% dCache Support - Third party libraries # # (See http://www.dcache.org) # # Check for libdcap # if test ! "x$enable_dcache" = "xno" ; then check_header "dcap.h" "$dcapincdir" \ $DCACHE ${DCACHE:+$DCACHE/include} \ /opt/d-cache/dcap/include /products/dcache/include \ /opt/dcache/include /usr/include /usr/local/include dcapincdir=$found_dir check_library "libdcap" "$enable_shared" "$dcaplibdir" \ $DCACHE ${DCACHE:+$DCACHE/lib} \ /opt/d-cache/dcap/lib /products/dcache/lib /opt/dcache/lib \ /usr/lib /usr/local/lib dcaplib=$found_lib dcaplibdir=$found_dir if test ! "x$dcaplib" = "x" ; then check_symbol dc_setClientActive "$dcaplib" "$dcaplibdir" if test $found_symbol -eq 0 ; then result "### Need dc_setClientActive in libdcap, upgrade your d-cache client library" dcaplib= dcaplibdir= dcapincdir= fi fi if test "x$dcapincdir" = "x" || test "x$dcaplib" = "x"; then enable_dcache="no" fi fi check_explicit "$enable_dcache" "$enable_dcache_explicit" \ "Explicitly required dCache dependencies not fulfilled" ###################################################################### # ### echo %%% Chirp Support - Third party libraries # # (See http://www.cse.nd.edu/~ccl/software/chirp) # # Check for libchirp # if test ! "x$enable_chirp" = "xno" ; then check_header "chirp_reli.h" "$chirpincdir" \ $CHIRP ${CHIRP:+$CHIRP/include} ${CHIRP:+$CHIRP/include/cctools} \ /opt/cctools/include /opt/cctools/include/cctools \ /usr/include /usr/include/cctools \ /usr/local/cctools/include /usr/local/cctools/include/cctools chirpincdir=$found_dir check_library "libchirp_client" "no" "$chirplibdir" \ $CHIRP ${CHIRP:+$CHIRP/lib} \ /opt/cctools/lib /usr/local/lib /usr/lib chirplib=$found_lib chirplibdir=$found_dir if test "x$chirpincdir" = "x" || test "x$chirplib" = "x"; then enable_chirp="no" fi fi check_explicit "$enable_chirp" "$enable_chirp_explicit" \ "Explicitly required Chirp dependencies not fulfilled" ###################################################################### # ### echo %%% HDFS Support - Third party libraries # # (See http://hadoop.apache.org/hdfs) # # Check for hdfs.h of HDFS and libhdfs # if test ! "x$enable_hdfs" = "xno" ; then # Check for hdfs include and library keepincdir=$hdfsincdir check_header "hdfs.h" "$hdfsincdir" \ $HDFS ${HDFS:+$HDFS/include} ${HDFS:+$HDFS/src/c++/libhdfs} \ $HADOOP_HOME ${HADOOP_HOME:+$HADOOP_HOME/src/c++/libhdfs} \ /usr/include /usr/local/include hdfsinc=$found_hdr hdfsincdir=$found_dir if test "x$platform" = "xmacosx" && test -z $JAVA_HOME; then JAVA_HOME=`/usr/libexec/java_home` fi keepincdir=$jniincdir check_header "jni.h" "$jniincdir" \ ${JAVA_HOME:+$JAVA_HOME/include} \ /usr/java/default/include /usr/include /usr/local/include jniinc=$found_hdr jniincdir=$found_dir check_library "libhdfs" "$enable_shared" "$hdfslibdir" \ $HDFS ${HDFS:+$HDFS/lib} ${HDFS:+$HDFS/build/libhdfs} \ $HADOOP_HOME ${HADOOP_HOME:+$HADOOP_HOME/build/libhdfs} \ /usr/lib /usr/local/lib hdfslib=$found_lib hdfslibdir=$found_dir check_library "libjvm" "$enable_shared" "$jvmlibdir" \ ${JAVA_HOME:+$JAVA_HOME/jre/lib/amd64/server} \ ${JAVA_HOME:+$JAVA_HOME/jre/lib/i386/server} \ ${JAVA_HOME:+$JAVA_HOME/../Libraries} \ /usr/java/default/jre/lib/amd64/server \ /usr/java/default/jre/lib/i386/server /usr/lib /usr/local/lib jvmlib=$found_lib jvmlibdir=$found_dir if test "x$hdfsincdir" = "x" || test "x$hdfslib" = "x" || test "x$jniincdir" = "x" || test "x$jvmlib" = "x"; then enable_hdfs="no" else case $platform in linux) check_link "$hdfslib $jvmlib" "$hdfslibdir $jvmlibdir" hdfsConnect if test $link_result -eq 0 ; then enable_hdfs="no" fi check_link $jvmlib "$jvmlibdir" JNI_CreateJavaVM if test $link_result -eq 0 ; then enable_hdfs="no" fi ;; esac if test "x$enable_hdfs" = "xno"; then echo "HDFS disabled due to failed compile and link test" fi fi fi check_explicit "$enable_hdfs" "$enable_hdfs_explicit" \ "Explicitly required HDFS dependencies not fulfilled" ###################################################################### # ### echo %%% Bonjour Support - Third party libraries # # (See http://developer.apple.com/networking/bonjour/index.html) # # By default available on MacOS X and on Linux via the Avahi package. # # Check for libdns_sd # bonjourcppflags= case $platform in linux|macosx|ios) ;; *) if test "x$enable_bonjour" = "xyes" ; then message "Checking whether Bonjour/Avahi is supported" result "no (currently only for Linux/MacOSX/iOS)" fi enable_bonjour=no ;; esac if test ! "x$enable_bonjour" = "xno" ; then case $arch in *icc) if test "x$enable_bonjour" = "xyes" ; then message "Checking whether Bonjour/Avahi is supported" result "no (currently not for the icc compiler)" fi enable_bonjour=no ;; *) ;; esac fi if test ! "x$enable_bonjour" = "xno" ; then # Bonjour is built-in on MacOS X / iOS (i.e. available in libSystem) if test ! "x$platform" = "xmacosx" && test ! "x$platform" = "xios" ; then check_header "dns_sd.h" "$dnssdincdir" \ $DNSSD ${DNSSD:+$DNSSD/include} \ /opt/dnssd/include /usr/include /usr/local/include dnssdincdir=$found_dir check_library "libdns_sd" "$enable_shared" "$dnssdlibdir" \ $DNSSD ${DNSSD:+$DNSSD/lib} /opt/dnssd/lib /usr/lib /usr/local/lib dnssdlib=$found_lib dnssdlibdir=$found_dir if test "x$dnssdincdir" = "x" || test "x$dnssdlib" = "x"; then enable_bonjour="no" fi fi # If we are on Linux, we must check also for the Avahi libraries. if test ! "x$enable_bonjour" = "xno" && test "x$platform" = "xlinux"; then # The compatibility layer is needed for the Bonjour record management. check_header "avahi-client/client.h" "$avahiincdir" \ $DNSSD ${DNSSD:+$DNSSD/include} \ /opt/include /usr/include /usr/local/include avahiincdir=$found_dir check_header "avahi-common/strlst.h" "$avahiincdir" \ $DNSSD ${DNSSD:+$DNSSD/include} \ /opt/include /usr/include /usr/local/include avahiincdir=$found_dir check_header "avahi-core/core.h" "$avahiincdir" \ $DNSSD ${DNSSD:+$DNSSD/include} \ /opt/include /usr/include /usr/local/include avahiincdir=$found_dir # Also, the library is needed, as in Mac OS X. When found the compat # layer, also the other libraries must be in the same location. check_library "libavahi-client" "$enable_shared" "$avahilibdir" \ $DNSSD ${DNSSD:+$DNSSD/lib} /opt/lib /usr/lib /usr/local/lib dnssdlib="$dnssdlib $found_lib" avahilibdir=$found_dir check_library "libavahi-common" "$enable_shared" "$avahilibdir" \ $DNSSD ${DNSSD:+$DNSSD/lib} /opt/lib /usr/lib /usr/local/lib dnssdlib="$dnssdlib $found_lib" avahilibdir=$found_dir check_library "libavahi-core" "$enable_shared" "$avahilibdir" \ $DNSSD ${DNSSD:+$DNSSD/lib} /opt/lib /usr/lib /usr/local/lib dnssdlib="$dnssdlib $found_lib" avahilibdir=$found_dir if test "x$dnssdincdir" = "x" || test "x$dnssdlib" = "x"; then enable_bonjour="no" fi if test "x$avahiincdir" = "x"; then enable_bonjour="no" fi fi if test ! "x$enable_bonjour" = "xno" ; then bonjourcppflags="-DBUILD_BONJOUR" fi fi check_explicit "$enable_bonjour" "$enable_bonjour_explicit" \ "Explicitly required Bonjour dependencies not fulfilled" ###################################################################### # ### echo %%% gLite Support - Third party libraries # # (See https://subversion.gsi.de/trac/dgrid/wiki) # # Check for libglite-api-wrapper # if test ! "x$enable_glite" = "xno" ; then check_library "libglite-api-wrapper" "$enable_shared" "$glitelibdir" \ $GAW_LOCATION $GLITE ${GLITE:+$GLITE/lib} \ ~/GAW/lib /usr/local/lib /usr/lib glitelib=$found_lib glitelibdir=$found_dir gaw_cppflags="${GAW_CPPFLAGS}" if test "x$glitelib" = "x"; then enable_glite="no" fi fi check_explicit "$enable_glite" "$enable_glite_explicit" \ "Explicitly required gLite dependencies not fulfilled" ###################################################################### # ### echo %%% AliEn Support - Third party libraries # # (See http://alien.cern.ch) # # Check for libgliteUI # if test ! "x$enable_alien" = "xno" ; then check_header "gapiUI.h" "$alienincdir" \ $ALIEN ${ALIEN:+$ALIEN/include} \ /opt/alien/api/include /usr/local/alien/api/include /usr/include \ /usr/local/include alienincdir=$found_dir check_library "libgapiUI" "$enable_shared" "$alienlibdir" \ $ALIEN ${ALIEN:+$ALIEN/lib} \ /opt/alien/api/lib /usr/local/alien/api/lib /usr/lib \ /usr/local/lib alienlib=$found_lib alienlibdir=$found_dir if test "x$alienincdir" = "x" || test "x$alienlib" = "x"; then enable_alien="no" fi fi check_explicit "$enable_alien" "$enable_alien_explicit" \ "Explicitly required AliEn dependencies not fulfilled" ###################################################################### # ### echo %%% AfterImage Support - Third party libraries # # (See http://afterstep.sourceforge.net/afterimage/) # # Check for graphics libraries used by libAfterImage, like libjpeg, etc. # if test ! "x$enable_asimage" = "xno" ; then # Currently our libAfterImage is completely out of sync with the official # libAfterImage due to many new features, use always the builtin_afterimage if test "x$enable_builtin_afterimage" = "xno" || test "x$enable_builtin_afterimage" = "x" ; then # Assume failure enable_builtin_afterimage="yes" checking_msg "afterimage-config" if `$cwhich afterimage-config > /dev/null 2>&1` ; then $cwhich afterimage-config # we found afterimage-config - now check the version number asimage_version=`afterimage-config --version | awk 'BEGIN { FS="." } { printf "%d", $1 * 1000 + $2 }'` if test $asimage_version -lt 1020 ; then result "WARNING: System libAfterImage is too old, using built-in" else enable_builtin_afterimage="no" asextralib=`afterimage-config --libs` asimageincdir=`afterimage-config --cflags | sed 's/-I//g'` fi else result "not found" fi fi # If we didn't find the system libAfterImage, or the user didn't ask # for a system library, then see if we have various headers needed. if test "x$enable_builtin_afterimage" = "xyes" && test ! "x$enable_cocoa" = "xyes"; then check_header "jpeglib.h" "" \ $ASIMAGE ${ASIMAGE:+$ASIMAGE/include} \ ${finkdir:+$finkdir/include} \ /usr/local/include /usr/include /opt/include asjpegincdir=$found_dir check_header "png.h" "" \ $ASIMAGE ${ASIMAGE:+$ASIMAGE/include} \ ${ASPNG:+$ASPNG/include} \ ${finkdir:+$finkdir/include} \ /usr/local/include /usr/X11/include /usr/include \ /usr/local/include/libpng /opt/include aspngincdir=$found_dir if test ! "x$enable_astiff" = "xno" ; then check_header "tiffio.h" "" \ $ASIMAGE ${ASIMAGE:+$ASIMAGE/include} \ ${finkdir:+$finkdir/include} \ /usr/local/include /usr/include /opt/include astiffincdir=$found_dir else astiffincdir="--with-tiff=no" fi asextralib="" asextralibdir="" found_libz="" found_dirz="" # libz must be before libpng, if libz is not found don't # add libpng which needs libz if test ! "x$enable_astiff" = "xno" ; then aslibs="libjpeg libtiff libz libpng" else aslibs="libjpeg libz libpng" fi for k in $aslibs ; do check_library $k "$enable_shared" "" \ $ASIMAGE ${ASIMAGE:+$ASIMAGE/lib} ${ASPNG:+$ASPNG/lib} \ ${finkdir:+$finkdir/lib} \ /usr/local/lib /usr/X11/lib /usr/lib /opt/lib if test "x$k" = "xlibz" ; then found_libz=$found_lib found_dirz=$found_dir continue; fi if test "x$k" = "xlibpng" && test "x$found_libz" = "x" ; then break; fi if test ! "x$found_lib" = "x" ; then asextralib="$asextralib $found_lib" asextralibdir="$asextralibdir $found_dir" fi done if test "x$asextralib" = "x" ; then asextralib="" asextralibdir="" asjpegincdir="" aspngincdir="" astiffincdir="" else asextralib="$asextralib $found_libz" asextralibdir="$asextralibdir $found_dirz" fi fi message "Checking whether to build included libAfterImage" result "$enable_builtin_afterimage" else enable_astiff="no" enable_builtin_afterimage="no" fi check_explicit "$enable_asimage" "$enable_asimage_explicit" \ "Explicitly required AfterImage dependencies not fulfilled" ###################################################################### # ### echo %%% LDAP Support - Third party libraries # # (See openldap.org) # # If the user has set the flags "--disable-ldap", we don't check for # LDAP at all. # if test ! "x$enable_ldap" = "xno"; then # Check for ldap include and library check_header "ldap.h" "$ldapincdir" \ $LDAP ${LDAP:+$LDAP/include} \ ${finkdir:+$finkdir/include} \ /usr/include/openldap /usr/include /usr/local/include \ /usr/local/ldap/include /usr/include/ldap /usr/ldap/include \ /usr/local/include/ldap /usr/local/include/openldap \ /usr/ldap /usr/local/ldap /opt/ldap /opt/ldap/include ldapinc=$found_hdr ldapincdir=$found_dir ldaplibdir1="$ldaplibdir" ldaplib="" ldaplibdir="" for i in libldap liblber ; do check_library $i "$enable_shared" "$ldaplibdir1" \ $LDAP ${LDAP:+$LDAP/lib} \ ${finkdir:+$finkdir/lib} \ /usr/local/ldap/lib /usr/local/lib \ /usr/lib/ldap /usr/local/lib/ldap /usr/ldap/lib /usr/lib \ /usr/ldap /usr/local/ldap /opt/ldap /opt/ldap/lib if test "x$found_lib" = "x" ; then ldaplib="" ldaplibdir="" enable_ldap="no" break fi ldaplib="$ldaplib $found_lib" ldaplibdir="$ldaplibdir $found_dir" done if test "x$ldapincdir" = "x" || test "x$ldaplib" = "x"; then enable_ldap="no" fi fi check_explicit "$enable_ldap" "$enable_ldap_explicit" \ "Explicitly required LDAP dependencies not fulfilled" ###################################################################### # ### echo %%% Python - Optional alternative interpreter # # (See http://www.python.org) # if test ! "x$enable_python" = "xno" ; then # Check for Python include and library mypython=`$cwhich python 2> /dev/null` if test ! "x$mypython" = "x" && test -x "$mypython" ; then pythonvers=`python -c 'import sys; sys.stdout.write(sys.version[:3])'` pythonsysincdir=`python -c 'import sys; sys.stdout.write(sys.prefix + "/include/python" + sys.version[:3])'` #pythonsyslibdir=`python -c 'import sys; sys.stdout.write(sys.prefix + "/lib/python" + sys.version[:3])'` pythonsyslibdir=`python -c 'import sys; sys.stdout.write(sys.prefix + "/lib")'` pythonsyslibdir2= if test "x$platform" = "xmacosx"; then pythonsyslibdir2=`python -c 'import sys; sys.stdout.write(sys.prefix)'` fi fi check_header "Python.h" "$pythonincdir" \ $PYTHONDIR ${PYTHONDIR:+$PYTHONDIR/include} \ ${PYTHONDIR:+$PYTHONDIR/include/python} $pythonsysincdir pythoninc=$found_hdr pythonincdir=$found_dir pysuffix="" if test "x$platform" = "xwin32"; then if test ! "x$mypython" = "x" && test -x "$mypython" ; then pythonvers=`python -c 'import sys; sys.stdout.write(sys.version[:3].replace(".",""))' | tr -d '\r'` if test ! "x$pythonincdir" = "x" ; then pythonincdir=`cygpath -m $pythonincdir` fi fi if test "x$enable_winrtdebug" = "xyes"; then pysuffix="_d" fi fi check_library "python${pythonvers}${pysuffix} libpython${pythonvers}${pysuffix} \ libpython${pysuffix} python${pysuffix} Python${pysuffix}" \ "$enable_shared" "$pythonlibdir" \ ${PYTHONDIR:+$PYTHONDIR/libs} ${PYTHONDIR:+$PYTHONDIR/lib} \ $PYTHONDIR $pythonsyslibdir $pythonsyslibdir2 \ /usr/local/lib /usr/lib $pythonsyslibdir/config pythonlib=$found_lib pythonlibdir=$found_dir if test "x$pythonincdir" = "x" || test "x$pythonlib" = "x"; then enable_python="no" if test "x$platform" = "xwin32" && test "x$enable_winrtdebug" = "xyes" && \ test "x$pythonlib" = "x" && test ! "x$pythonincdir" = "x"; then echo "INFO: Debug version of Python (python${pythonvers}${pysuffix}.lib) " \ "not found! Disabling Python support. If you need it, install the " \ "debug version or use --disable-winrtdebug" fi else pythonlibflags= case $platform in win32) pythonlibflags="-nodefaultlib:`basename $pythonlib`" ;; esac fi fi check_explicit "$enable_python" "$enable_python_explicit" \ "Explicitly required Python dependencies not fulfilled" ###################################################################### # ### echo %%% Ruby - Optional alternative interpreter # # (See http://www.ruby-lang.org) # if test ! "x$enable_ruby" = "xno" ; then # Check for Ruby include and library myruby=`$cwhich ruby 2> /dev/null` if test ! "x$myruby" = "x" && test -x "$myruby" ; then rubysysincdir=`ruby -rrbconfig -e 'puts RbConfig::CONFIG["rubyhdrdir"]'` rubysysarchdir=`ruby -rrbconfig -e 'puts RbConfig::CONFIG["archdir"]'` rubysyslibdir=`ruby -rrbconfig -e 'puts RbConfig::CONFIG["libdir"]'` rubysysarch=`ruby -rrbconfig -e 'puts RbConfig::CONFIG["arch"]'` if test "x$rubysysincdir" = "xnil" ; then rubysysincdir=`ruby -rrbconfig -e 'puts RbConfig::CONFIG["includedir"]'` fi fi rubysysarchdir2= if test "x$platform" = "xmacosx" ; then rubysysarchdir2=`echo $rubysysarchdir | sed -e 's/powerpc/universal/'` fi check_header "ruby.h" "$rubyincdir" \ $RUBYDIR ${RUBYDIR:+$RUBYDIR/include} \ $rubysysincdir $rubysysarchdir $rubysysarchdir2 \ /usr/local/include/ruby /usr/include/ruby rubyinc=$found_hdr rubyincdir=$found_dir check_header "ruby/config.h" "" $rubysysincdir/$rubysysarch if test "x$found_hdr" != "x" ; then rubyincdir="$rubyincdir $found_dir" fi if test "x$arch" = "xwin32" || \ test "x$enable_shared" = "xno" ; then check_library_options=`ruby -rrbconfig -e 'puts RbConfig::CONFIG["LIBRUBY_A"]' | sed 's|\.a.*||'` else check_library_options=`ruby -rrbconfig -e 'puts RbConfig::CONFIG["LIBRUBY"]' | sed 's|\.so.*||'` fi check_library "$check_library_options" \ "$enable_shared" "$rubylibdir" \ $RUBYDIR ${RUBYDIR:+$RUBYDIR/lib} \ $rubysyslibdir \ /usr/local/lib /usr/lib rubylib=$found_lib rubylibdir=$found_dir if test "x$rubyincdir" = "x" || test "x$rubylib" = "x"; then enable_ruby="no" else # Ruby support requires the explicitlink option enable_explicitlink="yes" if test ! "x$platform" = "xwin32"; then issue_explicitlink_warning="yes" fi fi fi check_explicit "$enable_ruby" "$enable_ruby_explicit" \ "Explicitly required Ruby dependencies not fulfilled" ###################################################################### # ### echo %%% xml - the XML parser interface # # (See http://www.xmlsoft.org) # # If the user has set the flags "--disable-xml", we don't check for # XML at all. # if test ! "x$enable_xml" = "xno" ; then # Check for xml include and library if test "x$platform" = "xmacosx"; then # prefer native libxml2 over the one in Fink (/sw) PATH=/usr/bin:$PATH fi checking_msg "xml2-config" xml2_config=`$cwhich xml2-config 2> /dev/null` if test ! "x$xml2_config" = "x" && test -x "$xml2_config" && \ test ! "x$platform" = "xwin32" && test "x$host" = "x" && \ test "x$xmlincdir" = "x" && test "x$xmllibdir" = "x"; then $cwhich xml2-config # we found xml2-config - now check the version number message "Checking for libxml2 version >= 2.4.x" xml2_version=`xml2-config --version | awk 'BEGIN { FS="." } { printf "%d", $1 * 1000 + $2 }'` if test $xml2_version -lt 2004 ; then result "no (`xml2-config --version`)" enable_xml="no" xmllibdir="" else result "ok" xmllib=`xml2-config --libs` xmlincdir=`xml2-config --cflags | sed 's/-I//g'` xmllibdir="" fi else result "not found" # fall back in case xml2-config is not found keepincdir=$xmlincdir check_header "libxml/tree.h" "$xmlincdir" \ $XMLDIR ${XMLDIR:+$XMLDIR/include} \ ${finkdir:+$finkdir/include/libxml2} \ /opt/include/libxml2 /usr/local/include/libxml2 /usr/include/libxml2 xmlincdir=$found_dir keeplibdir=$xmllibdir check_library "libxml2_a libxml2" "$enable_shared" "$xmllibdir" \ $XMLDIR ${XMLDIR:+$XMLDIR/lib} ${XMLDIR:+$XMLDIR/.libs} \ ${finkdir:+$finkdir/lib} \ /opt/libxml2/lib /usr/local/lib /usr/lib xmllib=$found_lib xmllibdir=$found_dir if test "x$platform" = "xwin32"; then check_header "iconv.h" "$keepincdir" \ $ICONVDIR ${ICONVDIR:+$ICONVDIR/include} \ $XMLDIR ${XMLDIR:+$XMLDIR/include} \ /opt/libxml2/include /usr/local/include/libxml2 /usr/include/libxml2 iconvincdir=$found_dir check_library "iconv_a" "$enable_shared" "$keeplibdir" \ $ICONVDIR ${ICONVDIR:+$ICONVDIR/lib} \ $XMLDIR ${XMLDIR:+$XMLDIR/lib} ${XMLDIR:+$XMLDIR/.libs} \ /opt/libxml2/lib /usr/local/lib /usr/lib iconvlib=$found_lib iconvlibdir=$found_dir else iconvincdir=$xmlincdir iconvlib="-liconv" fi if test "x$xmlincdir" = "x" || test "x$xmllib" = "x" || test "x$iconvincdir" = "x" || test "x$iconvlib" = "x" ; then xmlincdir="" enable_xml="no" else case $arch in win32gcc) xmllib="$xmllib -liconv" ;; esac case $platform in linux) xmllib="$xmllib -lpthread" ;; win32) xmlincdir="$xmlincdir $iconvincdir" xmllib="$xmllib $iconvlib Ws2_32.lib" ;; esac fi fi fi check_explicit "$enable_xml" "$enable_xml_explicit" \ "Explicitly required Xml dependencies not fulfilled" ###################################################################### # ### echo %%% Check for xrootd support # if test "x$enable_xrootd" = "xyes" ; then xrdcomm="" vercomm="" extraxrdflags="" # Localize the version header; priority to specific inc and lib settings, # followed by global dir setting and standard paths xrdincone="" xrdinctwoa="" xrdinctwob="" xrdinctmp="" if test ! "x$xrdlibdir" = "x" && test ! "x$xrdincdir" = "x"; then xrdincone="$xrdincdir/XrdVersion.hh" xrdlibone="$xrdlibdir" xrdinctmp="$xrdincdir $xrdinctmp" elif test ! "x$xrootddir" = "x"; then xrdlibtwo="$xrootddir" xrdinctwoa="$xrootddir/include/xrootd/XrdVersion.hh" xrdinctwob="$xrootddir/src/XrdVersion.hh" xrdinctmp="$xrootddir/include/xrootd $xrootddir/src $xrdinctmp" else # Standard paths xrdpaths="$XRDSYS /opt/xrootd /usr/local /usr" for stdp in $xrdpaths ; do if test -d "$stdp/lib" || test -d "$stdp/lib64" ; then xrdlibthree="$xrdlibthree $stdp/lib" xrdinctmp="$xrdinctmp $stdp/include/xrootd $stdp/include" fi done fi # Run the search now check_header "XrdVersion.hh" "" "$xrdinctmp" if test ! "x$found_hdr" = "x" ; then xrdinc="$found_dir/$found_hdr" # Find out which path was the good one if test "x$xrdinc" = "x$xrdincone" ; then xrdincdir="$found_dir" xrdlibdir="$xrdlibone" elif test "x$xrdinc" = "x$xrdinctwoa" ; then xrdincdir="$xrdlibtwo/include/xrootd" xrdlibdir="$xrdlibtwo/lib" elif test "x$xrdinc" = "x$xrdinctwob" ; then xrdincdir="$xrdlibtwo/src" xrdlibdir="$xrdlibtwo/lib" else for ll in $xrdlibthree ; do rdir=`dirname $ll` xinca="$rdir/include/xrootd/XrdVersion.hh" xincb="$rdir/include/XrdVersion.hh" if test "x$xrdinc" = "x$xinca" ; then xrdincdir="$rdir/include/xrootd" xrdlibdir="$ll" elif test "x$xrdinc" = "x$xincb" ; then xrdincdir="$rdir/include" xrdlibdir="$ll" fi if test ! "x$xrdincdir" = "x" ; then break fi done # Only here if something inconsistent was found if test "x$xrdincdir" = "x" ; then enable_xrootd="no" xrdincdir="" xrdlibdir="" fi fi else enable_xrootd="no" xrdincdir="" xrdlibdir="" fi fi # Decode version xrdver= decver=0 if test "x$enable_xrootd" = "xyes" ; then message "Checking for xrootd version" verh=$xrdincdir/XrdVersion.hh xrdver=`grep XrdVERSION $verh` if test $? -eq 0 ; then set $xrdver xrdver=$3 else xrdver="unknown" fi if test ! "x$xrdver" = "xunknown"; then tmpver=`echo $xrdver | sed -e 's|"\(.*\)"|\1|' -e 's|^v||' -e 's|-.*||'` if test "x$tmpver" = "xuntagged" ; then decver=9999999999 else oldver="no" hasdash=`echo $tmpver | grep '-'` hasdot=`echo $tmpver | grep '\.'` if test ! "x$hasdash" = "x" || test "x$hasdot" = "x"; then oldver="yes" fi if test "x$oldver" = "xno" ; then if test ! "x$hasdot" = "x" ; then ver1=`echo $tmpver | cut -d . -f 1` ver2=`echo $tmpver | cut -d . -f 2` if test "x$ver1.$ver2" = "x$tmpver" ; then oldver="yes" else ver3=`echo $tmpver | cut -d . -f 3` decver=`expr $ver1 \* 100000000 + $ver2 \* 10000 + $ver3` fi fi fi if test "x$oldver" = "xyes" ; then decver=`echo $tmpver | sed 's|[^0-9]||g' | cut -c1-8` fi fi fi # Protect against 3.3.0, first version with 'include/xrootd/private' if [ $decver -eq 300030000 ] ; then echo "Cannot build against version $xrdver (missing headers)" enable_xrootd="no" else echo "$xrdver" fi fi xrdincprivate="no" if test "x$enable_xrootd" = "xyes" ; then extraxrdflags="-DROOTXRDVERS=$decver" vercomm="setting $extraxrdflags" # # Check libraries now hasxrdutils="no" libxrdoucbjr="" # # Release date of version 3.1.0 containing the new lib packaging decreftre=300000000 decrefutils=300010000 if [ $decver -lt $decreftre ] ; then decrefutils=20111021 fi decrefnetut=20100729 if [ $decver -ge $decrefutils ] ; then xrdlibs="libXrdMain libXrdUtils libXrdClient" hasxrdutils="yes" elif [ $decver -ge $decrefnetut ] ; then xrdlibs="libXrdNet libXrdNetUtil libXrdOuc libXrdSys libXrdClient libXrd" else xrdlibs="libXrdNet libXrdOuc libXrdSys libXrdClient libXrd" fi tmpxrdlibdir="" xrdlibext="" for ll in $xrdlibs ; do # # Check if packaging has libXrdUtils or the old libXrdOuc, libXrdSys, ... check_library $ll "$enable_shared" "$xrdlibdir" "$xrdlibdir" if test "x$found_lib" = "x" ; then enable_xrootd="no" xrdincdir="" xrdlibdir="" break else xrdlibext="$found_ext" tmpxrdlibdir="$found_dir" if test "x$ll" = "xlibXrdUtils" || test "x$ll" = "xlibXrdOuc"; then libxrdoucbjr="$found_lib" fi fi done # # If not 'so' or 'a', comunicate the extension for the library loadings # in XrdProofd. This may be temporary, as xrootd may do it automatically, # one day ... if test ! "x$xrdlibext" = "x" && test ! "x$xrdlibext" = "xso" && test ! "x$xrdlibext" = "xa"; then # The \'s are needed to produce -DLT_MODULE_EXT=\".ext\" in Makefile.config extraxrdflags="$extraxrdflags -DLT_MODULE_EXT=\\\\\".$xrdlibext\\\\\"" fi # # Check also if 'include/private' exists: we need to signal this to the build modules # for correct location of some headers available form the dlevel packages for version >= 3.3.x if test "x$enable_xrootd" = "xyes"; then if test -d "$xrdincdir/private"; then xrdincprivate="yes" fi fi # # Check if bonjour is available for code potentially using it ... if test "x$enable_xrootd" = "xyes"; then xrdlibdir="$tmpxrdlibdir" if test "x$enable_bonjour" = "xyes"; then check_symbol XrdOucBonjour "$libxrdoucbjr" "$xrdlibdir" if test $found_symbol -eq 0 ; then bonjourcppflags= fi fi fi fi check_explicit "$enable_xrootd" "$enable_xrootd_explicit" \ "Explicitly required Xrootd dependencies not fulfilled" ###################################################################### # ### echo %%% Globus Support - Third party libraries # # (See www.globus.org) # # If the user has set the flags "--disable-globus", we don't check for # Globus at all. # glbextracflags="" glbpatchcflags="" haveglobus="" if test ! "x$enable_globus" = "xno"; then # Check if the GLOBUS_LOCATION variable is set checking_msg "for globusdir" if test "x$globusdir" = "x" ; then result "no" checking_msg "GLOBUS_LOCATION" if test ! "x$GLOBUS_LOCATION" = "x" ; then globusdir=$GLOBUS_LOCATION result "$GLOBUS_LOCATION" else result "no" fi else result "$globusdir" fi fi if test "x$enable_globus" = "xyes"; then pthr="pthr" #determine flavour tag of the building flavour="" if test "x$globusincdir" = "x" ; then if test ! "x$globusdir" = "x" ; then globusincdir=$globusdir/include else globusincdir=/usr/include fi fi searchincdir="$globusincdir/gcc32 $globusincdir/gcc32dbg \ $globusincdir/gcc32pthr $globusincdir/gcc32dbgpthr \ $globusincdir/gcc64 $globusincdir/gcc64dbg \ $globusincdir/gcc64pthr $globusincdir/gcc64dbgpthr \ $globusincdir/globus $globusincdir" # Found the reference dir first # Used to check for openssl/x509.h, but since we might be using # the system default, we have replaced this with globus_gss_assist.h check_header "globus_gss_assist.h" "" "$searchincdir" if test "x$found_hdr" = "x" ; then globusinc="" globusincdir="" enable_globus="no" else flavour=`basename $found_dir` if test "x$flavour" = "xglobus" ; then flavour= flavour_suf= else flavour_suf=_${flavour} fi globusinc="$globusinc $found_hdr" globusincdir=$found_dir # The other headers now # Used to search for openssl/pem.h and globus_gss_assist.h here, # but those are removed, because we might be using the openssl of the # system, and we already checked for globus_gss_assist.h inclist="globus_common.h" for i in $inclist ; do check_header $i "" "$globusincdir" if test "x$found_hdr" = "x" ; then globusinc="" globusincdir="" enable_globus="no" break fi globusinc="$globusinc $found_hdr" done fi fi if test "x$enable_globus" = "xyes"; then # With more recent versions we need an additional header check_header globus_gsi_credential.h "" "$globusincdir" gsiversion="no" if test ! "x$found_hdr" = "x" ; then gsiversion="yes" globusinc="$globusinc $found_hdr" gsicredentialh=$found_dir/globus_gsi_credential.h echo "Checking for gsi version ... yes" else echo "Checking for gsi version ... no" check_header sslutils.h "" "$globusincdir" if test ! "x$found_hdr" = "x" ; then globusinc="$globusinc $found_hdr" else globusinc="" globusincdir="" enable_globus="no" fi fi fi if test "x$enable_globus" = "xyes"; then if test "x$globuslibdir" = "x" ; then if test ! "x$globusdir" = "x" ; then globuslibdir=$globusdir/lib else globuslibdir=/usr/lib fi fi globuslib="" searchlibdir=$globuslibdir globuslibdir="" extra_inc= globuslibs="libglobus_gss_assist${flavour_suf} libglobus_gssapi_gsi${flavour_suf} libglobus_gsi_credential${flavour_suf} libglobus_common${flavour_suf} libglobus_gsi_callback${flavour_suf} libglobus_proxy_ssl${flavour_suf} libglobus_gsi_sysconfig${flavour_suf} libglobus_openssl_error${flavour_suf} libglobus_gssapi_gsi${flavour_suf} libglobus_gsi_callback${flavour_suf} libglobus_oldgaa${flavour_suf} libglobus_gsi_cert_utils${flavour_suf} libglobus_openssl${flavour_suf} libglobus_gsi_proxy_core${flavour_suf} libglobus_callout${flavour_suf} libltdl${flavour_suf} libssl${flavour_suf} libcrypto${flavour_suf}" for i in $globuslibs ; do check_library $i "$enable_shared" "$searchlibdir" \ /opt/globus /usr/lib /usr/local/lib if test "x$found_lib" = "x" ; then globuslib="" globuslibdir="" enable_globus="no" break fi globuslib="$globuslib $found_lib" if test "x$globuslibdir" = "x" && test ! "x$found_dir" = "x" ; then globuslibdir="$found_dir" fi if test "x$extra_inc" = "x" && test ! "x$found_raw_dir" = "x" ; then extra_inc=$found_raw_dir/globus/include fi done if test ! "x$extra_inc" = "x" ; then message "Checking whether $extra_inc should be added to header path" if test -d $extra_inc ; then globusincdir="$globusincdir $extra_inc" result "yes" else result "no" fi fi fi if test "x$enable_globus" = "xyes"; then # Need to source this before init proxies (when not in default path) sourcepath="" if test -s $globusdir/etc/globus-user-env.sh ; then sourcepath="$globusdir/etc" fi if test "x$sourcepath" = "x" ; then result "Checking for globus-user-env.sh ... no" else result "Checking for globus-user-env.sh ... $sourcepath" fi # Need this to init proxies initpath="" if test -s $globusdir/bin/grid-proxy-init ; then initpath="$globusdir/bin" elif which grid-proxy-init > /dev/null 2>&1 ; then initpath=`which grid-proxy-init` initpath=`dirname $initpath` fi if test "x$initpath" = "x" ; then result "Checking for grid-proxy-init ... no (cannot run as client)" else result "Checking for grid-proxy-init ... $initpath" fi if test "x$globusincdir" = "x" || test "x$globuslib" = "x"; then globuslib="" enable_globus="no" else haveglobus="globus" fi fi if test "x$enable_globus" = "xyes"; then glbextracflags="-DR__GLBS" if test "x$gsiversion" = "xyes" ; then glbextracflags="$glbextracflags -DR__GLBS22" fi # Everything seems ok: now check if there is the need for a patch patchneeded="no" tobepatched="globus_gsi_credential" package="globus_gsi_credential" version="" message "Checking for globus-gsi-credential version" # check if we have pkg-config if `$cwhich pkg-config > /dev/null 2>&1` ; then if pkg-config --exists globus-gsi-credential ; then version=`pkg-config --modversion globus-gsi-credential` result "$version" fi fi if test "x$version" = "x" ; then # No explicit version given: try to find version out from gpt files ... packdir="$globusdir/etc/globus_packages/$package" if test -d $packdir ; then for i in pkg_data_${flavour}_rtl.gpt pkg_data_${flavour}_dev.gpt ; do if test -r $packdir/$i ; then packfileinfo=$packdir/$i break fi done if test ! "x$packfileinfo" = "x" ; then packfiletmp=`basename $packfileinfo` echo "Checking for $packfiletmp ... $packdir" versionstr=`grep Aging_Version $packfileinfo` majorversion=`echo $versionstr | sed 's!.*Major="\([0-9]*\)".*!\1!'` minorversion=`echo $versionstr | sed 's!.*Minor="\([0-9]*\)".*!\1!'` version=$majorversion.$minorversion result "$version" fi fi fi if test ! "x$version" = "x" ; then versionmajor=`echo $version | cut -d. -f1` versionminor=`echo $version | cut -d. -f2` if test ! "x$versionmajor" = "x0" || ( test ! "x$versionminor" = "x5" && test ! "x$versionminor" = "x7" && test ! "x$versionminor" = "x8" && test ! "x$versionminor" = "x9" ) ; then patchneeded="no" result "Checking for need of globus patch ... no" else patchneeded="yes" result "Checking for need of globus patch ... yes, version $version" # Check consistency: get reference versions gsicredconstantsh=`echo $gsicredentialh | sed 's|credential.h|cred_constants.h|'` grepout=`grep "Revision:" $gsicredentialh` grepout=`echo "$grepout" | sed 's|Revision:||'` for i in $grepout ; do if test ! "x$i" = "x\$"; then gcver=$i fi done grepout=`grep "Revision:" $gsicredconstantsh` grepout=`echo "$grepout" | sed 's|Revision:||'` for i in $grepout ; do if test ! "x$i" = "x\$"; then gccver=$i fi done # Get info from map file vertmp="" mismatch="no" mapfile="globusauth/src/patches/$tobepatched/map" exec 10< $mapfile read v1 v2 v3 <&10 while [ ! "x$v1" = "x" ] ; do if test "x$v1" = "x$version" ; then if test ! "x$gcver" = "x$v2" || test ! "x$gccver" = "x$v3"; then mismatch="yes" fi fi if test "x$gcver" = "x$v2" && test "x$gccver" = "x$v3"; then vertmp=$v1 fi read v1 v2 v3 <&10 done # Final check message "Checking for patch version consistency" if test "x$mismatch" = "xyes" ; then if test ! "x$vertmp" = "x" ; then version=$vertmp result "no: guess value from map file: $version" else result "no: unable to guess value from map file: keep $version" fi else result "yes" fi fi else result "information directory not available" fi # Now find includes needed for patch, if the case if test "x$patchneeded" = "xyes" ; then # build patching flags glbpatchcflags="-DR__GLBCPATCH" for i in globus_gsi_system_config.h globus_gsi_cert_utils.h ; do dirtmp=`find $globusincdir -name $i -exec dirname {} \;` if test ! "x$dirtmp" = "x" ; then result "Checking for $i ... $dirtmp" add="yes" for k in $glbpatchcflags ; do if test "x$k" = "x-I$dirtmp" ; then add="no" fi done if test "x$add" = "xyes" ; then glbpatchcflags="$glbpatchcflags -I$dirtmp" fi else result "Checking for $i ... no (globus patch not applied)" patchneeded="no" glbpatchcflags="" break fi done fi if test "x$patchneeded" = "xyes" ; then # Path with patched files and includes globuspatchdir="globusauth/src/patches/$tobepatched/$version" # copy patched file in the globusauth/src directory cp -rp $globuspatchdir/$tobepatched.c globusauth/src/$tobepatched.c glbpatchcflags="$glbpatchcflags -I$globuspatchdir/include" if test ! "x$glbpatchcflags" = "x" ; then result "Applying experimental patch to $tobepatched.c" fi fi fi check_explicit "$enable_globus" "$enable_globus_explicit" \ "Explicitly required Globus dependencies not fulfilled" ###################################################################### # ### echo %%% SSL Support - Third party libraries # # (See www.openssl.org) # # For public and symmetric key encryption. If missing, the local rsa # simple implementation is used to protect password exchange. # If configured with support for Globus/GSI authentication, # use the SSL libraries coming with the globus tool kit to avoid # conflicts. # if test "x$enable_ssl" = "xyes" ; then # # dirs: --with-ssl-incdir and --with-ssl-libdir have priority on --with-ssl-dir # in both cases we link statically unless --with-ssl-shared is 'yes' # if test ! "x$ssldir" = "x" ; then if test "x$sslincdir" = "x" ; then sslincdir=$ssldir/include fi if test "x$ssllibdir" = "x" ; then ssllibdir=$ssldir/lib fi if test "x$sslshared" = "x" ; then sslshared=no fi else if test ! "x$ssllibdir" = "x" ; then if test "x$sslshared" = "x" ; then sslshared=no fi fi fi if test "x$sslshared" = "x" ; then sslshared="$enable_shared" fi # # libssl # if test "x$platform" = "xwin32"; then if test "x$enable_winrtdebug" = "xyes"; then libssl="libssl ssleay32 ssleay32MDd" else libssl="libssl ssleay32 ssleay32MD" fi else libssl="libssl" fi tmpssllibdir="" check_library "$libssl" "$sslshared" "$ssllibdir" \ $SSL ${SSL:+$SSL/lib} \ ${finkdir:+$finkdir/lib} \ /usr/lib /usr/local/lib /opt/lib if test "x$found_lib" != "x" ; then ssllib="$found_lib" if test ! "x$found_lib" = "x-lssl" ; then tmpssllibdir="$ssllibdir" ssllibdir="" if test ! "x$tmpssllibdir" = "x" ; then tmpssllibdir=`dirname $found_lib` fi if test ! "x$sslshared" = "xno" ; then sslshared=no fi else ssllibdir="$found_dir" tmpssllibdir=`echo $ssllibdir | cut -c3-` fi # # libcrypto, in the same dir # if test "x$platform" = "xwin32"; then if test "x$enable_winrtdebug" = "xyes"; then libcrypto="libcrypto libeay32 libeay32MDd" else libcrypto="libcrypto libeay32 libeay32MD" fi else libcrypto="libcrypto" fi check_library "$libcrypto" "$sslshared" "$tmpssllibdir" \ $SSL ${SSL:+$SSL/lib} \ ${finkdir:+$finkdir/lib} \ /usr/lib /opt/lib /usr/local/lib cryptolib=$found_lib cryptolibdir=$found_dir if test "x$found_lib" != "x" ; then ssllib="$ssllib $found_lib" ssllibdir="$found_dir" else ssllib="" ssllibdir="" enable_ssl="no" fi else ssllib="" ssllibdir="" enable_ssl="no" fi fi if test "x$enable_ssl" = "xyes" ; then if test "x$sslshared" = "xno" ; then echo "Using OpenSSL static libraries" fi incssl="bio.h blowfish.h err.h pem.h rand.h rsa.h" ssl_incdir="" for i in $incssl ; do check_header "openssl/$i" "$sslincdir" \ $SSL ${SSL:+$SSL/include} \ ${finkdir:+$finkdir/include} \ /usr/include /usr/local/include /opt/include if test "x$found_hdr" = "x" ; then ssl_incdir="" enable_ssl="no" break fi if test "x$ssl_incdir" = "x" ; then ssl_incdir=$found_dir else for i in $ssl_incdir ; do if test "x$i" != "x$found_dir" ; then ssl_incdir="$found_dir $ssl_incdir" fi done fi done fi if test "x$enable_ssl" = "xno" ; then ssllib="" ssllibdir="" sslincdir="" sslextracflags="" else sslincdir=$ssl_incdir sslextracflags="-DR__SSL -DOPENSSL_NO_KRB5" fi check_explicit "$enable_ssl" "$enable_ssl_explicit" \ "Explicitly required SSL dependencies not fulfilled" ###################################################################### # ### echo %%% SRP Support - Third party libraries # # (See http://srp.stanford.edu/srp) # Note: You can not make do with the libsrp package. You need the full # source for this add-on. # # Check for SRP (libsrp.a) # srpextracflags="" havesrp="" if test ! "x$enable_srp" = "xno" ; then if test "x$srpincdir" = "x" && test ! "x$srpdir" = "x" ; then srpincdir=$srpdir/include if test ! -d $srpincdir ; then srpincdir=$srpdir/libsrp fi fi check_header "t_server.h" "$srpincdir" \ ${SRP:+$SRP/include} ${SRP:+$SRP/libsrp} \ /usr/srp/include /usr/include /usr/include/srp /usr/local/include \ /usr/local/srp/include /usr/local/include/srp srpinc=$found_hdr srpincdir=$found_dir if test "x$srpincdir" = "x" ; then enable_srp="no" fi if test "x$srplibdir" = "x" && test ! "x$srpdir" = "x" ; then srplibdir=$srpdir/lib if test ! -d $srplibdir ; then srplibdir=$srpdir/libsrp fi fi srplibdirs="$SRP ${SRP:+$SRP/lib} ${SRP:+$SRP/libsrp} \ /usr/srp/lib /usr/local/srp/lib \ /usr/lib/srp /usr/local/lib/srp /usr/lib /usr/local/lib" check_library "libsrp" "no" "$srplibdir" $srplibdirs srplib=$found_lib srplibdir=$found_dir check_symbol BN_new "$srplib" "$srplibdir" if test $found_symbol -eq 0 ; then check_library "libgmp" "$enable_shared" "" $srplibdir $srplibdirs gmplib=$found_lib gmplibdir=$found_dir else check_library "libcrypto" "$enable_shared" "" $srplibdir $srplibdirs cryptolib=$found_lib cryptolibdir=$found_dir if test -r $cryptolib && test "x$enable_shared" = "xno" ; then case $platform in linux) cryptolib="$cryptolib -ldl" esac fi fi if test "x$srplib" = "x" ; then enable_srp="no" srplibdir="" elif test "x$gmplib" = "x" && test "x$cryptolib" = "x" ; then enable_srp="no" gmplibdir="" else srplib="$srplib $gmplib" srplibdir="$srplibdir $gmplibdir" fi srputillib="" srputillibdir="" srplibdirs="$srpdir/base/libmisc $srpdir/base/lib \ $SRP/base/libmisc $SRP/base/lib \ /usr/local/srp/lib /usr/local/lib/srp /usr/srp/lib /usr/lib/srp \ /usr/local/lib /usr/lib" for i in libmisc libshadow ; do check_library "$i" "no" "" $srplibdirs if test "x$found_lib" = "x" ; then srputillib="" srputillibdir="" enable_srp="no" break fi srputillib="$srputillib $found_lib" srputillibdir="$srputillibdir $found_dir" done if test ! "x$srpdir" = "x" ; then srputilincdir=$srpdir/base/lib fi check_header "pwauth.h" "$srputilincdir" \ $SRP ${SRP:+$SRP/base/lib} \ /usr/local/srp/base/lib /usr/srp/base/lib srputilincdir=$found_dir if test "x$srputilincdir" = "x" ; then enable_srp="no" fi if test "x$enable_srp" = "xno" ; then srplib="" srputillib="" else srpextracflags="-DR__SRP" havesrp="srp" fi fi check_explicit "$enable_srp" "$enable_srp_explicit" \ "Explicitly required SRP dependencies not fulfilled" ###################################################################### # ### echo %%% AFS Support - Third party libraries # # (See http://www.openafs.org) # # Check for AFS # afsextracflags="" if test ! "x$enable_afs" = "xno" ; then if test ! "x$afsdir" = "x" ; then # Set the search paths, giving priority to explicit settings if test "x$afslibdir" = "x" ; then afslibdir="$afsdir/lib" fi if test "x$afsincdir" = "x" ; then afsincdir="$afsdir/include" fi if test "x$afsshared" = "x" ; then # With external libs, default is static afsshared="no" fi fi if test "x$afsshared" = "x" ; then # Use global default if none set afsshared=$enable_shared fi hasafserrormessage="no" afssearchlibdirs="${afsdir:+$afsdir/afs} ${AFS:+$AFS/lib} \ ${finkdir:+$finkdir/lib} \ /usr/lib /usr/local/lib /opt/lib" afslibs="libafsrpc libafsauthent" if test "x$afsshared" = "xyes" ; then # We try to use the shared version of the libraries; however, for OpenAFS # versions <= 1.4.6 these were inconsistent, some needed symbols not being # exported. We need to check the symbols first echo "Checking for shared AFS libs:" check_library libafsrpc "$afsshared" "$afslibdir" $afssearchlibdirs if test ! "x$found_lib" = "x"; then afslib="$found_lib" afslibdirs="$found_dir" # # Check symbols # afssymbols="afs_add_to_error_table strcompose stolower ucstring lcstring AssertionFailed" for s in $afssymbols ; do check_symbol $s "$found_lib" "$found_dir" if test $found_symbol -eq 0 ; then afslib="" afslibdirs="" afsshared="no" break fi done # # Save lib, if OK if test "x$afsshared" = "xyes" ; then # Check for afs_error_message, if needed if test "x$hasafserrormessage" = "xno" ; then check_symbol afs_error_message "$found_lib" "$found_dir" if test $found_symbol -eq 1 ; then hasafserrormessage="yes" fi fi check_library libafsauthent "$afsshared" "$afslibdir" $afssearchlibdirs if test ! "x$found_lib" = "x" ; then check_symbol ka_GetAFSTicket "$found_lib" "$found_dir" if test $found_symbol -eq 0 ; then afslib="" afslibdirs="" afsshared="no" break else afslib="$afslib $found_lib" havedir="no" for l in $afslibdirs ; do if test "x$l" = "x$found_dir" ; then havedir="yes" fi done if test "x$havedir" = "xno" ; then afslibdirs="$afslibdirs $found_dir" fi fi else afslib="" afslibdirs="" afsshared="no" fi fi else afsshared="no" fi fi if test "x$enable_afs" = "xyes" && test "x$afsshared" = "xno" ; then # # Static Libraries echo "Checking for static AFS libs:" # for i in $afslibs ; do check_library "$i" "$afsshared" "$afslibdir" $afssearchlibdirs if test "x$found_lib" = "x" ; then afslib="" afslibdirs="" enable_afs="no" break fi afslib="$found_lib $afslib" # Check for afs_error_message, if needed if test "x$hasafserrormessage" = "xno" ; then check_symbol afs_error_message "$afslib" "$afslibdir" if test $found_symbol -eq 1 ; then hasafserrormessage="yes" fi fi done fi # # header files # if test "x$enable_afs" = "xyes" ; then check_header "afs/kautils.h" "$afsincdir" \ ${finkdir:+$finkdir/include} \ /usr/include /usr/local/include /opt/include if test ! "x$found_hdr" = "x" ; then afsincdir="-I$found_dir" tmpincdir=$found_dir otherincafs="stds.h com_err.h" for i in $otherincafs ; do if test ! -f "$tmpincdir/afs/$i" ; then echo "Checking for afs/$i ... no" afsincdir="" enable_afs="no" break else echo "Checking for afs/$i ... $tmpincdir" fi done else afsincdir="" enable_afs="no" fi fi if test "x$afslib" = "x" ; then enable_afs="no" else afsextracflags="-DR__AFS" # flag for error_message prototype if test "x$hasafserrormessage" = "xno" ; then afsextracflags="$afsextracflags -DR__AFSOLDCOMERR" fi # Warn about usage of static libs to build a shared object if test "x$afsshared" = "xno" ; then echo "### WARNING: AFS enabled using static libraries: this may lead to relocation-related" echo "### errors or warnings if the static libraries are not compiled with the correct options;" echo "### if this happens, please re-run with --enable-shared or rebuild the AFS static libs " echo "### with the '-fPIC' option." fi fi fi check_explicit "$enable_afs" "$enable_afs_explicit" \ "Explicitly required Afs dependencies not fulfilled" ###################################################################### # ### echo %%% krb5 Support - Third party libraries # # # Check for krb5 (libkrb5.a) # krb5extracflags="" havekrb5="" if test ! "x$enable_krb5" = "xno" ; then enable_krb5="yes" if test "x$krb5incdir" = "x" && test ! "x$krb5dir" = "x" ; then krb5incdir=$krb5dir/include fi krb5heff= check_header "krb5.h" "$krb5incdir" /usr/kerberos/include \ /usr/krb5/include /usr/local/kerberos/include \ /usr/include /usr/include/kerberosV /usr/local/include if test "x$found_dir" = "x" ; then enable_krb5=no else krb5heff=$found_dir/$found_hdr krb5inc=$found_hdr krb5incdir=$found_dir fi if test ! "x$enable_krb5" = "xno" ; then # # Check if 'krb5heff' is the real one or if it re-directs # to message "Checking for krb5.h redirect" redir=`grep "krb5\/krb5\.h" $krb5heff 2> /dev/null` if test ! "x$redir" = "x" ; then krb5heff=`dirname $krb5heff`/krb5/krb5.h fi result $krb5heff # # Check for prototypes in krb5.h hask5vcstproto=`grep krb5_c_valid_cksumtype $krb5heff 2> /dev/null` if test ! "x$hask5vcstproto" = "x" ; then echo "Checking for krb5_c_valid_cksumtype in krb5.h ... yes" hask5vcstproto="yes" else echo "Checking for krb5_c_valid_cksumtype in krb5.h ... no" hask5vcstproto="no" fi hasvcstproto=`grep valid_cksumtype $krb5heff | grep -v krb5_c_valid_cksumtype 2> /dev/null` if test ! "x$hasvcstproto" = "x" ; then echo "Checking for valid_cksumtype in krb5.h ... yes" hasvcstproto="yes" else echo "Checking for valid_cksumtype in krb5.h ... no" hasvcstproto="no" fi krb5libdirorg="" if test ! "x$krb5libdir" = "x" ; then krb5libdirorg=$krb5libdir fi if test "x$krb5libdir" = "x" && test ! "x$krb5dir" = "x" ; then krb5libdirorg=$krb5dir/lib fi krb5libdirs="/usr/kerberos/lib \ /usr/krb5/lib /usr/local/kerberos/lib /usr/lib /usr/local/lib" # check whether using MIT krb5 krb5mit=no krb5lib="" krb5libdir="" check_library libk5crypto "$enable_shared" "$krb5libdirorg" $krb5libdirs if test ! "x$found_lib" = "x" ; then krb5mit=yes krb5lib=$found_lib krb5libdir=$found_dir fi message "Checking whether we're using MIT Kerberos" result "$krb5mit" fi # Only MIT kerberos is currently supported if test ! "x$enable_krb5" = "xno" && test "x$krb5mit" = "xyes" ; then # Check for 'valid_cksumtype' symbols check_symbol krb5_c_valid_cksumtype $krb5lib "$krb5libdir" if test $found_symbol -eq 1 ; then hask5vcstsymbol="yes" fi check_symbol valid_cksumtype $krb5lib "$krb5libdir" if test $found_symbol -eq 1 ; then hasvcstsymbol="yes" fi if test "x$hask5vcstsymbol" = "xyes" && test "x$hask5vcstproto" = "xno" ; then needsvcstproto="-DR__KRB5_NEED_VCST_PROTO" elif test ! "x$hask5vcstsymbol" = "xyes" ; then if test "x$hasvcstsymbol" = "xyes" ; then needsvcstdefine="-DR__KRB5_NEED_VCST_DEFINE" if test "x$hasvcstproto" = "xno" ; then needsvcstproto="-DR__KRB5_NEED_VCST_PROTO" fi else echo "Either 'krb5_c_valid_cksumtype' or 'valid_cksumtype' are available; disabling krb5" enable_krb5=no fi fi if test ! "x$enable_krb5" = "xno" ; then check_library libkrb5 "$enable_shared" "$krb5libdirorg" $krb5libdirs if test "x$found_lib" = "x" ; then enable_krb5=no else # The order is important here krb5lib="$found_lib $krb5lib" krb5libdir="$found_dir $krb5libdir" if test "x$cryptolib" = "x" ; then check_library "libcrypto" "$enable_shared" "$krb5libdirorg" \ $krb5libdirs cryptolib=$found_lib cryptolibdir=$found_dir if test -r $cryptolib && test "x$enable_shared" = "xno" ; then case $platform in linux) cryptolib="$cryptolib -ldl" esac fi if test "x$cryptolib" = "x" ; then enable_krb5=no fi fi fi krb5init="" krb5bindir="" if test ! "x$krb5dir" = "x" ; then krb5bindir=$krb5dir/bin fi for i in "$krb5bindir" /usr/kerberos/bin \ /usr/krb5/bin /usr/local/kerberos/bin \ /usr/bin /usr/local/bin ; do if test -x $i/kinit ; then krb5init=$i/kinit break fi done if test "x$krb5init" = "x" ; then result "Checking for kinit ... no" else echo "Checking for kinit ... $krb5init" fi fi else enable_krb5=no fi if test ! "x$enable_krb5" = "xyes" ; then krb5incdir="" krb5lib="" krb5libdir="" else krb5extracflags="-DR__KRB5 $needsvcstproto $needsvcstdefine" havekrb5="krb5" fi fi check_explicit "$enable_krb5" "$enable_krb5_explicit" \ "Explicitly required Kerberos5 dependencies not fulfilled" ###################################################################### # ### echo %%% Communication of errors library # # This library is needed by both AFS and Kerberos support, so to # avoid duplicate linkage, this is done here. # if test "x$enable_afs" = "xyes" || test "x$enable_krb5" = "xyes" ; then if test ! "x$afsdir" = "x" ; then comerrlibdir="$afsdir/lib" fi if test ! "x$krb5libdirorg" = "x" ; then if test ! "x$comerrlibdir" = "x" ; then comerrlibdir="$comerrlibdir $krb5libdirorg" else comerrlibdir=$krb5libdirorg fi fi check_library libcom_err "$enable_shared" "$comerrlibdir" \ "$afssearchlibdirs $krb5libdirs" if test "x$found_lib" = "x" ; then enable_krb5=no krb5incdir="" krb5lib="" krb5libdir="" krb5extracflags="" enable_afs=no afslib="" comerrlib="" comerrlibdir="" else comerrlib=$found_lib comerrlibdir=$found_dir fi case $platform in linux|solaris) # Resolver lives in separate library resolvlib="-lresolv" ;; esac fi ###################################################################### # ### echo %%% Shadow password support # checking_msg "shadow passwords" if test "x$enable_shadowpw" = "x"; then if test -f "/etc/shadow" ; then enable_shadowpw="yes" else enable_shadowpw="no" fi fi if test "x$enable_shadowpw" = "xyes"; then shadowpw="-DR__SHADOWPW " fi result $enable_shadowpw check_explicit "$enable_shadowpw" "$enable_shadowpw_explicit" \ "Explicitly required Shadow passwords dependencies not fulfilled" ###################################################################### # ### echo %%% MathMore Library - Contributed library # if test ! "x$enable_mathmore" = "xno"; then # Check for GSL include and library gslskip= hasmathmore="define" # by default use now static GSL library everywhere unless configure # was run with --enable-gsl-shared option # before the global --enable-shared was used: # enable_gsl_shared=$enable_shared" check_header "gsl/gsl_version.h" "$gslincdir" \ $GSL ${GSL:+$GSL/include} ${GSL:+$GSL/api} \ ${finkdir:+$finkdir/include} \ /usr/local/include /usr/include /opt/gsl/include # check for gsl version >= 1.8 if test ! "x$found_dir" = "x"; then message "Checking for GSL version >= 1.8" gsl_version=`grep "define GSL" $found_dir/gsl/gsl_version.h | sed 's/^.*"\([0-9]\..*[0-9]\)"/\1/' | awk 'BEGIN { FS="." } { printf "%d", $1 * 1000 + $2 }'` if test $gsl_version -lt 1008; then gslskip="skip" result "no" enable_mathmore="no" else result "ok" gslinc=$found_hdr gslincdir=$found_dir gslflags=-I$gslincdir gslversion=$gsl_version fi fi if test ! "x$gslflags" = "x"; then #check for the library now gsllibdir0=$gsllibdir check_library "libgsl gslML gsl" "$enable_gsl_shared" "$gsllibdir" \ $GSL ${GSL:+$GSL/lib} ${GSL:+$GSL/.libs} \ ${finkdir:+$finkdir/lib} \ /usr/local/lib /usr/lib /opt/gsl/lib if test "x$checklibcompat" = "xyes" ; then if test $is_libnotcompat -eq 1 ; then # on OSX if libgsl exists but is not compatible gslskip="skip" enable_mathmore="no" fi fi if test ! "x$found_lib" = "x"; then gsllibs=$found_lib gsllibdir=$found_dir # in case of shared libs (gsllibdir is not empty) need gslcblas # assume libgslcblas is in same dir as libgsl or in ../cblas/ #if test ! "x$gsllibdir" = "x"; then if test ! "x$gsllibdir0" = "x"; then gsllibdir1=$gsllibdir0/../cblas/.libs fi check_library "libgslcblas gslcblasML gslcblas cblas" \ "$enable_gsl_shared" "" \ $gsllibdir0 $gsllibdir1 \ $GSL ${GSL:+$GSL/lib} ${GSL:+$GSL/.libs} \ ${GSL:+$GSL/cblas/.libs} \ ${finkdir:+$finkdir/lib} \ /usr/local/lib \ /usr/lib /opt/gsl/lib if test ! "x$found_lib" = "x"; then gsllibs="$gsllibs $found_lib" gsllibdir=$found_dir else #cblas not found gsllibs="" fi #fi fi fi # # if gslincdir not specified look for gsl-config # # gsl-config check does not work on Solaris, or when x-compiling, so lets skip it if test "x$platform" = "xsolaris" || test ! "x$host" = "x"; then if test "x$gslincdir" = "x" || test "x$gsllibs" = "x"; then gslskip="skip" enable_mathmore="no" fi fi # skip cygwin gsl-config when in pure Win32 mode if test "x$platform" = "xwin32"; then if `$cwhich gsl-config > /dev/null 2>&1` ; then case `$cwhich gsl-config` in /bin/*|/usr/bin/*) if (test "x$gslincdir" = "x" || test "x$gsllibs" = "x"); then gslskip="skip" enable_mathmore="no" fi ;; esac fi fi if (test "x$gslincdir" = "x" || test "x$gsllibs" = "x") && \ test ! "x$gslskip" = "xskip"; then checking_msg "gsl-config" if `$cwhich gsl-config > /dev/null 2>&1` ; then $cwhich gsl-config # we found gsl-config - now check the version number message "Checking for GSL version >= 1.8" gsl_version=`gsl-config --version | awk 'BEGIN { FS="." } { printf "%d", $1 * 1000 + $2 }'` if test $gsl_version -lt 1008 ; then result "no (`gsl-config --version`)" enable_mathmore="no" else # We've found `gsl-config' - use that to get the compiler # and linker flags result "ok" gslflags=`gsl-config --cflags` if test "x$enable_gsl_shared" = "xyes"; then gsllibs=`gsl-config --libs` else # use static libs gslprefix=`gsl-config --prefix` gsllibs="$gslprefix/lib/libgsl.a $gslprefix/lib/libgslcblas.a" fi gsllibdir="" gslversion=$gsl_version fi else enable_mathmore="no" result "not found" fi fi if test "x$enable_mathmore" = "xyes" && \ test "x$enable_gsl_shared" = "xno" ; then for gslalib in $gsllibs; do if `basename $gslalib > /dev/null 2>&1`; then if [ "x`basename $gslalib .a`" != "x`basename $gslalib`" ]; then message "Checking whether $gslalib is compiled with -fPIC" check_libpic $gslalib if test $is_libpic -eq 0 ; then result "no" enable_mathmore="no" else result "yes" fi fi fi done if `$cwhich gsl-config > /dev/null 2>&1` && \ test "x$enable_mathmore" = "xno" ; then message "Checking for shared library versions using gsl-config" gslflags=`gsl-config --cflags` gsllibs=`gsl-config --libs` gsllibdir="" enable_mathmore="yes" result "yes" fi fi fi message "Checking whether to build libMathMore" if test "x$enable_mathmore" = "xyes"; then result "yes" hasmathmore="define" else result "no" hasmathmore="undef" fi check_explicit "$enable_mathmore" "$enable_mathmore_explicit" \ "Explicitly required MathMore dependencies not fulfilled" ###################################################################### # ### echo %%% GenVector Library - Contributed library # message "Checking whether to build libGenVector" if test ! "x$enable_genvector" = "xno"; then enable_genvector="yes" result "yes" else enable_genvector="" result "no" fi check_explicit "$enable_genvector" "$enable_genvector_explicit" \ "Explicitly required GenVector dependencies not fulfilled" ###################################################################### # ### echo %%% Cintex Library - Contributed library # message "Checking whether to build libCintex" if test ! "x$enable_cintex" = "xno"; then # only enable on i386, i686, x86_64: case "$chip" in i*86 | x86_64) enable_cintex="yes" result "yes" ;; *) case `uname -m` in i*86 | x86_64) enable_cintex="yes" result "yes" ;; *) logmsg " incompatible Cintex architecture $chip" enable_cintex="" result "no" ;; esac esac else enable_cintex="" result "no" fi ###################################################################### # ### echo %%% Reflex Library - Contributed library # message "Checking whether to build libReflex" if test ! "x$enable_reflex" = "xno"; then enable_reflex="yes" result "yes" else enable_reflex="" result "no" fi ###################################################################### # ### echo %%% RooFit Library - Contributed library # message "Checking whether to build libRooFit" if test "x$enable_roofit" = "xyes" || test ! "x$ROOFIT" = "x"; then enable_roofit="yes" result "yes" else enable_roofit="" result "no" fi ###################################################################### # ### echo %%% Minuit2 Library - Contributed library # message "Checking whether to build libMinuit2" if test "x$enable_minuit2" = "xyes" || test ! "x$MINUIT2" = "x"; then enable_minuit2="yes" result "yes" else enable_minuit2="" result "no" fi ###################################################################### # ### echo %%% Unuran Library - Contributed library # message "Checking whether to build libUnuran" if test "x$enable_unuran" = "xyes" || test ! "x$UNURAN" = "x"; then enable_unuran="yes" result "yes" else enable_unuran="" result "no" fi ###################################################################### # ### echo %%% GDML Library - Contributed library # message "Checking whether to build libGdml" if test "x$enable_gdml" = "xyes" || test ! "x$GDML" = "x"; then enable_gdml="yes" result "yes" else enable_gdml="" result "no" fi ###################################################################### # ### echo %%% Table Library - Contributed library # message "Checking whether to build libTable" if test "x$enable_table" = "xyes" || test ! "x$TABLE" = "x"; then enable_table="yes" result "yes" else enable_table="" result "no" fi ###################################################################### # ### echo %%% TMVA Library - Contributed library # message "Checking whether to build libTMVA" if test "x$enable_tmva" = "xyes" ; then enable_tmva="yes" result "yes" else enable_tmva="" result "no" fi ###################################################################### # ### echo %%% MemStat Library - check for memory leaks in application. # message "Checking whether to build libMemStat" if test "x$enable_memstat" = "xyes" || test ! "x$MEMSTAT" = "x"; then case $arch in linux*|macos*) enable_memstat="yes" ;; *) enable_memstat="no" ;; esac else enable_memstat="no" fi result $enable_memstat ###################################################################### # ### echo %%% Check for afdsmgrd support # # afdsmgrd -- Dataset manager for PROOF-based analysis facilities # by Dario Berzano # See http://code.google.com/p/afdsmgrd/ # message "Checking whether to build afdsmgrd" if test "x$enable_afdsmgrd" = "xyes" ; then afdsmgrd_cmake=`$cwhich cmake` if test "x$afdsmgrd_cmake" = "x" ; then result "`basename $0`: cmake MUST be in \$PATH in order to build afdsmgrd" exit 1 fi if test "x$arch" = "xwin32" ; then result "`basename $0`: afdsmgrd can't be enabled on Windows" exit 1 fi if test ! "x$monalisalibdir" = "x" ; then afdsmgrdapmondir=`dirname -- "${monalisalibdir#-L}"` elif test ! "x$alienlibdir" = "x" ; then afdsmgrdapmondir=`dirname -- "${alienlibdir#-L}"` else afdsmgrdapmondir="" fi if test ! "x$afdsmgrdapmondir" = "x" ; then afdsmgrdapmon="$afdsmgrdapmondir" afdsmgrdapmonmsg=", using ApMon at $afdsmgrdapmondir" else afdsmgrdapmon="" afdsmgrdapmonmsg=", ApMon support disabled" fi else enable_afdsmgrd="no" fi result "$enable_afdsmgrd$afdsmgrdapmonmsg" ###################################################################### # ### echo %%% Cling - LLVM/clang based interpreter prototype # message "Checking whether to integrate experimental cling" hascling="undef" clingextrares="" if test ! "x$enable_cling" = "xno"; then # allow LLVMDIR instead of --with-llvm-config if test "x$llvmconfig" = "x" ; then if test ! "x$LLVMDIR" = "x" ; then llvmconfig="$LLVMDIR/bin" else clingextrares="(needs --with-llvm-config or \$LLVMDIR)" fi result "no" fi if test ! "x$llvmconfig" = "x"; then if test -d "$llvmconfig"; then llvmconfig=$llvmconfig/llvm-config fi if test -f $llvmconfig && test -x $llvmconfig; then hascling="define" fi fi fi if test "x$hascling" = "xundef"; then enable_cling="no" result "no $clingextrares" else enable_cling="yes" result "yes" fi ###################################################################### # ### echo %%% What dictionaries to build # # Can be either CINT (default), reflex, or gccxml. # Option will be passed to rootcint(_tmp), # and root-config --libs will have -lReflex if needed. # message "Checking what type of dictionaries to build" # --with-dicttype overrides env var ROOTDICTTYPE if test "x$dicttype" = "x" ; then dicttype="$ROOTDICTTYPE" fi # set default to CINT if test "x$dicttype" = "x"; then dicttype=cint fi case "$dicttype" in cint);; reflex | gccxml) # check that cintex is enabled for reflex/gccxml if test ! "x$enable_cintex" = "xyes"; then result "Cannot generate $dicttype dictionaries with cintex disabled." dicttype=cint fi ;; *) result "Unknown dictionary \"$dicttype\"." result " Must be one of cint, reflex, gccxml." dicttype=cint ROOTDICTTYPE="trigger print info" ;; esac # Print info if dicttype!=cint, or --with-dict overrides $ROOTDICTTYPE result "$dicttype" ###################################################################### # ### echo %%% Debian or Red Hat package list # # If we're asked to build for a set of RPMs or Debian packages, we # make a list of the packages it's possible for us to build on this # system. # if test "x$show_pkglist" = "xyes" ; then test "x$enable_python" = "xyes" && pl="$pl libroot-bindings-python" test "x$enable_ruby" = "xyes" && pl="$pl libroot-bindings-ruby" test "x$enable_opengl" = "xyes" && pl="$pl libroot-graf3d-gl" test "x$enable_xml" = "xyes" && pl="$pl libroot-io-xmlparser" test "x$enable_mathmore" = "xyes" && pl="$pl libroot-math-mathmore" test "x$enable_unuran" = "xyes" && pl="$pl libroot-math-unuran" test "x$enable_table" = "xyes" && pl="$pl libroot-misc-table" test "x$enable_ldap" = "xyes" && pl="$pl libroot-net-ldap" test "x$enable_roofit" = "xyes" && pl="$pl libroot-roofit" test "x$enable_asimage" = "xyes" && pl="$pl root-plugin-graf2d-asimage" test "x$enable_gdml" = "xyes" && pl="$pl root-plugin-geom-gdml" test "x$enable_qt" = "xyes" && pl="$pl root-plugin-gui-qt root-plugin-graf2d-qt" test "x$enable_castor" = "xyes" && pl="$pl root-plugin-io-castor" test "x$enable_chirp" = "xyes" && pl="$pl root-plugin-io-chirp" test "x$enable_dcache" = "xyes" && pl="$pl root-plugin-io-dcache" test "x$enable_gfal" = "xyes" && pl="$pl root-plugin-io-gfal" test "x$enable_hdfs" = "xyes" && pl="$pl root-plugin-io-hdfs" test "x$enable_rfio" = "xyes" && pl="$pl root-plugin-io-rfio" test "x$enable_fftw3" = "xyes" && pl="$pl root-plugin-math-fftw3" test "x$enable_fitsio" = "xyes" && pl="$pl root-plugin-graf2d-fitsio" test "x$enable_gviz" = "xyes" && pl="$pl root-plugin-graf2d-gviz" test "x$enable_minuit2" = "xyes" && pl="$pl root-plugin-math-minuit2" test "x$enable_pythia6" = "xyes" && pl="$pl root-plugin-montecarlo-pythia6" test "x$enable_alien" = "xyes" && pl="$pl root-plugin-net-alien" test "x$enable_bonjour" = "xyes" && pl="$pl root-plugin-net-bonjour" test "x$enable_globus" = "xyes" && pl="$pl root-plugin-net-globus" test "x$enable_krb5" = "xyes" && pl="$pl root-plugin-net-krb5" test "x$enable_monalisa" = "xyes" && pl="$pl root-plugin-net-monalisa" test "x$enable_srp" = "xyes" && pl="$pl root-plugin-net-srp" test "x$enable_mysql" = "xyes" && pl="$pl root-plugin-sql-mysql" test "x$enable_odbc" = "xyes" && pl="$pl root-plugin-sql-odbc" test "x$enable_oracle" = "xyes" && pl="$pl root-plugin-sql-oracle" test "x$enable_pgsql" = "xyes" && pl="$pl root-plugin-sql-pgsql" test "x$enable_sapdb" = "xyes" && pl="$pl root-plugin-sql-maxdb" test "x$enable_xrootd" = "xyes" && pl="$pl root-system-xrootd root-plugin-net-netx root-plugin-net-xrootd" pl="$pl \ libroot-geom \ libroot-graf2d-gpad \ libroot-graf2d-graf \ libroot-graf2d-postscript \ libroot-graf3d-eve \ libroot-graf3d-g3d \ libroot-gui \ libroot-gui-ged \ libroot-hist \ libroot-hist-spectrum \ libroot-io \ libroot-math-foam \ libroot-math-genvector \ libroot-math-mathcore \ libroot-math-matrix \ libroot-math-minuit \ libroot-math-mlp \ libroot-math-physics \ libroot-math-quadp \ libroot-math-smatrix \ libroot-math-splot \ libroot-misc-minicern \ libroot-montecarlo-eg \ libroot-montecarlo-vmc \ libroot-net \ libroot-net-auth \ libroot-proof \ libroot-tmva \ libroot-tree \ libroot-tree-treeplayer \ root-plugin-geom-geombuilder \ root-plugin-geom-geompainter \ root-plugin-graf2d-x11 \ root-plugin-graf3d-x3d \ root-plugin-gui-fitpanel \ root-plugin-gui-guibuilder \ root-plugin-gui-sessionviewer \ root-plugin-hist-hbook \ root-plugin-hist-histpainter \ root-plugin-hist-spectrumpainter \ root-plugin-io-sql \ root-plugin-io-xml \ root-plugin-math-fumili \ root-plugin-proof-proofplayer \ root-plugin-proof-xproof \ root-plugin-tree-treeviewer \ root-system-proofd \ root-system-rootd \ root-system-doc \ root-system-bin \ libroot-core \ root-system-common \ ttf-root-installer" pl=`echo $pl | tr -s ' '` # If we're called from the package preparation script, then # print out the package list and exit result "packages: $pl" exit 0 fi ###################################################################### # ### echo %%% check for setresuid and setresgid # setresuid="undef" case $platform in linux) message "Checking whether setresuid declared in /usr/include/unistd.h" if `grep setresuid /usr/include/unistd.h > /dev/null 2>&1` ; then setresuid="define" result "yes" else result "no" fi ;; esac ###################################################################### # ### echo %%% Explicitlink - explicitly link with all dependent libraries # case $arch in macosx*|freebsd*|openbsd|aix*|win32*|linux*) enable_explicitlink="yes" issue_explicitlink_warning="no" ;; esac if test "x$enable_explicitlink" = "xyes" && test ! "x$platform" = "xwin32"; then mkliboption=$mkliboption"-x " fi ###################################################################### # ### echo %%% Exit here if this is a dry run # if test "x$noact" = "xyes" ; then exit 0 fi ###################################################################### # ### echo %%% Create needed directories # if test ! -d include ; then message "Creating include" mkdir include result "done" fi if test ! -d bin ; then message "Creating bin" mkdir bin result "done" fi if test ! -d lib ; then message "Creating lib" mkdir lib result "done" fi ###################################################################### # ### echo %%% Cleanup obsolete links and files # if test -h opengl ; then rm -f opengl fi if test -h ttf ; then rm -f ttf fi if test -f system.rootrc ; then rm -f system.rootrc fi if test -d new ; then rm -rf new fi if test -d star ; then rm -rf star fi if test -d include/cint ; then rm -rf include/cint fi if test -d graf2d/freetype/src/freetype-2.3.5 ; then rm -rf graf2d/freetype/src/freetype-2.3.5 fi if test -d pcre/src/pcre-6.4 ; then rm -rf pcre/src/pcre-6.4 fi if test -d core/pcre/src/pcre-7.4 ; then rm -rf core/pcre/src/pcre-7.4 fi if test -d math/unuran/src/unuran-1.3.0-root ; then rm -rf math/unuran/src/unuran-1.3.0-root fi if test -d math/unuran/src/unuran-1.5.0-root ; then rm -rf math/unuran/src/unuran-1.5.0-root fi if test -d math/unuran/src/unuran-1.5.1-root ; then rm -rf math/unuran/src/unuran-1.5.1-root fi if test -d math/unuran/src/unuran-1.7.1-root ; then rm -rf math/unuran/src/unuran-1.7.1-root fi if test -d math/unuran/src/unuran-1.7.2-root ; then rm -rf math/unuran/src/unuran-1.7.2-root fi if test -d cint/cint7 ; then rm -rf cint/cint7 fi if test -d core/editline ; then rm -rf core/editline fi if test -d net/xrootd ; then rm -rf net/xrootd fi if test -d build/unix/drop_from_path ; then rm -rf build/unix/drop_from_path fi if test ! "x$macosx106" = "x"; then rm -f bin/python64 bin/ruby64 fi rm -f lib/libRXML* bin/libRXML* etc/system.rootmap \ lib/libProofGui* bin/libProofGui* \ lib/libMySQL* bin/libMySQL* lib/libGedOld* bin/libGedOld* \ lib/libSQL.* bin/libSQL.* \ lib/libASPluginGS.* bin/g2rootold* bin/ptest main/src/ptest.* \ math/mathcore/src/G__MathCore32.* \ tmva/src/G__TMVA.* graf3d/eve/src/G__Eve.* \ xrootd/src/headers.d include/Xpm.h \ asimage/src/headers.d asimage/src/G__ASImageGS.* \ core/utils/src/rootcint7.cxx core/utils/src/RStl7.cxx \ core/metautils/src/TClassEdit7.cxx \ core/metautils/src/RConversionRuleParser7.cxx \ core/meta/src/G__TCint.h core/meta/src/G__TCint.cxx \ core/thread/src/TLockFile.* proof/proofplayer/src/TFileMerger.* \ graf2d/graf/src/G__Graf1.h graf2d/graf/src/G__Graf1.cxx \ graf2d/graf/src/G__Graf2.h graf2d/graf/src/G__Graf2.cxx \ net/net/src/TAS3File.* net/net/src/TGSFile.* net/net/src/THTTPMessage.* \ etc/daemons/olbd.rc.d etc/daemons/cmsd.rc.d etc/daemons/xrootd.rc.d \ bin/cmsd bin/xprep bin/xrd bin/xrdcp bin/xrdgsiproxy bin/xrdpwdadmin \ bin/xrdsssadmin bin/xrdstagetool bin/xrootd lib/libXrd* \ bin/drop_from_path ###################################################################### # ### echo %%% Fleshin out paths # # First win32 does not support -L in ldflags, so remove @ldflags@. # if test "x$platform" = "xwin32" ; then sed -e "s|@ldflags@||" \ < Makefile.tmp > Makefile.tmpp mv Makefile.tmpp Makefile.tmp fi if test "x$enable_globus" = "xyes" && test "x$enable_rpath" = "xyes"; then case "$arch" in solarisCC5) sed -e "s|@ldflags@|-R$globusdir/lib @ldflags@|" \ < Makefile.tmp > Makefile.tmpp ;; solarisgcc* | linux* | freebsd* | openbsd*) sed -e "s|@ldflags@|-Wl,-rpath,$globusdir/lib @ldflags@|" \ < Makefile.tmp > Makefile.tmpp ;; macosx*) if test ! "x$macosx105" = "x"; then sed -e "s|@ldflags@|-Wl,-rpath,$globusdir/lib @ldflags@|" \ < Makefile.tmp > Makefile.tmpp fi ;; esac if test -f Makefile.tmpp ; then mv Makefile.tmpp Makefile.tmp fi fi if test ! "x$haveconfig" = "x" ; then ################################################################## # ### echo %%% Static directory build. # if test "x$prefix" = "x"; then prefix=/usr/local; fi if test "x$bindir" = "x"; then bindir=$prefix/bin; fi if test "x$libdir" = "x"; then libdir=$prefix/lib/root; fi if test "x$incdir" = "x"; then incdir=$prefix/include/root; fi if test "x$etcdir" = "x"; then etcdir=/etc/root; fi if test "x$mandir" = "x"; then mandir=$prefix/share/man/man1; fi if test "x$datadir" = "x"; then datadir=$prefix/share/root; fi if test "x$macrodir" = "x"; then macrodir=$datadir/macros; fi if test "x$cintincdir" = "x"; then cintincdir=$libdir/cint; fi if test "x$iconpath" = "x"; then iconpath=$datadir/icons; fi if test "x$srcdir" = "x"; then srcdir=$datadir/src; fi if test "x$fontdir" = "x"; then fontdir=$datadir/fonts; fi if test "x$docdir" = "x"; then docdir=$prefix/share/doc/root; fi if test "x$testdir" = "x"; then testdir=$docdir/test; fi if test "x$tutdir" = "x"; then tutdir=$docdir/tutorials; fi if test "x$aclocaldir" = "x"; then aclocaldir=$prefix/share/aclocal; fi if test "x$elispdir" = "x"; then elispdir=$prefix/share/emacs/site-lisp; fi if test "x$enable_rpath" = "xyes" ; then case "$arch" in solarisCC5) sed -e "s|@ldflags@|-R$libdir @ldflags@|" \ < Makefile.tmp > Makefile.tmpp ;; solarisgcc* | linux* | freebsd* | openbsd*) sed -e "s|@ldflags@|-Wl,-rpath,$libdir @ldflags@|" \ < Makefile.tmp > Makefile.tmpp ;; macosx*) if test ! "x$macosx105" = "x"; then sed -e "s|@ldflags@|-Wl,-rpath,$libdir @ldflags@|" \ < Makefile.tmp > Makefile.tmpp fi ;; esac if test -f Makefile.tmpp ; then mv Makefile.tmpp Makefile.tmp fi fi sed -e "s|@useconfig@|TRUE|" \ -e "s|@cflags@|$haveconfig|" \ < Makefile.tmp > Makefile.tmpp mv Makefile.tmpp Makefile.tmp else ################################################################## # ### echo %%% Environment driven build. Escape sequences very important # prefix=\$\(ROOTSYS\) bindir=\$\(ROOTSYS\)/bin libdir=\$\(ROOTSYS\)/lib incdir=\$\(ROOTSYS\)/include etcdir=\$\(ROOTSYS\)/etc datadir=\$\(ROOTSYS\) mandir=\$\(ROOTSYS\)/man/man1 macrodir=\$\(ROOTSYS\)/macros cintincdir=\$\(ROOTSYS\)/cint iconpath=\$\(ROOTSYS\)/icons srcdir=\$\(ROOTSYS\)/src fontdir=\$\(ROOTSYS\)/fonts docdir=\$\(ROOTSYS\) testdir=\$\(ROOTSYS\)/test tutdir=\$\(ROOTSYS\)/tutorials aclocaldir=\$\(ROOTSYS\)/build/misc elispdir=\$\(ROOTSYS\)/build/misc # when using rpath in this case the build product is not relocatable # except for macosx 10.5 where we build relative to the location of # the executable if test "x$enable_rpath" = "xyes" ; then case "$arch" in solarisCC5) sed -e "s|@ldflags@|-R$libdir @ldflags@|" \ < Makefile.tmp > Makefile.tmpp ;; solarisgcc* | linux* | freebsd* | openbsd*) sed -e "s|@ldflags@|-Wl,-rpath,$libdir @ldflags@|" \ < Makefile.tmp > Makefile.tmpp ;; macosx*) if test ! "x$macosx105" = "x"; then sed -e "s|@ldflags@|-Wl,-rpath,@loader_path/../lib @ldflags@|" \ < Makefile.tmp > Makefile.tmpp fi ;; esac if test -f Makefile.tmpp ; then mv Makefile.tmpp Makefile.tmp fi fi sed -e "s|@useconfig@|FALSE|" \ -e "s|@cflags@||" \ -e "s|@ldflags@||" \ < Makefile.tmp > Makefile.tmpp mv Makefile.tmpp Makefile.tmp fi ###################################################################### # ### echo %%% Writing files # #--------------------------------------------------------------------- # config/Makefile.config # message "Writing $MAKEOUT" sed -e "s|@aclocaldir@|$aclocaldir|" \ -e "s|@afslib@|$afslib|" \ -e "s|@afslibdir@|$afslibdirs|" \ -e "s|@afsincdir@|$afsincdir|" \ -e "s|@afsextracflags@|$afsextracflags|" \ -e "s|@afsshared@|$afsshared|" \ -e "s|@alienincdir@|$alienincdir|" \ -e "s|@alienlib@|$alienlib|" \ -e "s|@alienlibdir@|$alienlibdir|" \ -e "s|@alloclibdir@|$alloclibdir|" \ -e "s|@alloclib@|$alloclib|" \ -e "s|@architecture@|$arch|" \ -e "s|@host@|$host|" \ -e "s|@asextralib@|$asextralib|" \ -e "s|@asextralibdir@|$asextralibdir|" \ -e "s|@asjpegincdir@|$asjpegincdir|" \ -e "s|@aspngincdir@|$aspngincdir|" \ -e "s|@astiffincdir@|$astiffincdir|" \ -e "s|@asimageincdir@|$asimageincdir|" \ -e "s|@asimagelib@|$asimagelib|" \ -e "s|@asimagelibdir@|$asimagelibdir|" \ -e "s|@bindir@|$bindir|" \ -e "s|@bonjourcppflags@|$bonjourcppflags|" \ -e "s|@buildasimage@|$enable_asimage|" \ -e "s|@builtinafterimage@|$enable_builtin_afterimage|" \ -e "s|@buildftgl@|$enable_builtin_ftgl|" \ -e "s|@buildglew@|$enable_builtin_glew|" \ -e "s|@builtinfreetype@|$enable_builtin_freetype|" \ -e "s|@builtinpcre@|$enable_builtin_pcre|" \ -e "s|@hasxrd@|$enable_xrootd|" \ -e "s|@castorincdir@|$castorincdir|" \ -e "s|@castorlib@|$castorlib|" \ -e "s|@castorlibdir@|$castorlibdir|" \ -e "s|@castorcflags@|$castorcflags|" \ -e "s|@chirpincdir@|$chirpincdir|" \ -e "s|@chirplib@|$chirplib|" \ -e "s|@chirplibdir@|$chirplibdir|" \ -e "s|@cintmaxstruct@|$cintmaxstruct|" \ -e "s|@cintmaxtypedef@|$cintmaxtypedef|" \ -e "s|@cintlongline@|$cintlongline|" \ -e "s|@cintincdir@|$cintincdir|" \ -e "s|@cppunit@|$cppunit|" \ -e "s|@datadir@|$datadir|" \ -e "s|@dcapincdir@|$dcapincdir|" \ -e "s|@comerrlib@|$comerrlib|" \ -e "s|@comerrlibdir@|$comerrlibdir|" \ -e "s|@cryptolib@|$cryptolib|" \ -e "s|@cryptolibdir@|$cryptolibdir|" \ -e "s|@dcaplib@|$dcaplib|" \ -e "s|@dcaplibdir@|$dcaplibdir|" \ -e "s|@dicttype@|$dicttype|" \ -e "s|@docdir@|$docdir|" \ -e "s|@elispdir@|$elispdir|" \ -e "s|@buildgenvector@|$enable_genvector|" \ -e "s|@buildmathmore@|$enable_mathmore|" \ -e "s|@ftglincdir@|$ftglincdir|" \ -e "s|@ftgllibdir@|$ftgllibdir|" \ -e "s|@ftgllibs@|$ftgllibs|" \ -e "s|@glewincdir@|$glewincdir|" \ -e "s|@glewlibdir@|$glewlibdir|" \ -e "s|@glewlibs@|$glewlibs|" \ -e "s|@gslflags@|$gslflags|" \ -e "s|@gsllibdir@|$gsllibdir|" \ -e "s|@gsllibs@|$gsllibs|" \ -e "s|@gslversion@|$gslversion|" \ -e "s|@builtinzlib@|$enable_builtin_zlib|" \ -e "s|@zlibincdir@|$zlibincdir|" \ -e "s|@zliblib@|$zliblib|" \ -e "s|@zliblibdir@|$zliblibdir|" \ -e "s|@builtinlzma@|$enable_builtin_lzma|" \ -e "s|@lzmaincdir@|$lzmaincdir|" \ -e "s|@lzmalib@|$lzmalib|" \ -e "s|@lzmalibdir@|$lzmalibdir|" \ -e "s|@buildcintex@|$enable_cintex|" \ -e "s|@buildcling@|$enable_cling|" \ -e "s|@buildreflex@|$enable_reflex|" \ -e "s|@buildroofit@|$enable_roofit|" \ -e "s|@buildminuit2@|$enable_minuit2|" \ -e "s|@buildunuran@|$enable_unuran|" \ -e "s|@buildgdml@|$enable_gdml|" \ -e "s|@buildmonalisa@|$enable_monalisa|" \ -e "s|@buildtable@|$enable_table|" \ -e "s|@buildtmva@|$enable_tmva|" \ -e "s|@buildmemstat@|$enable_memstat|" \ -e "s|@enable_thread@|$enable_thread|" \ -e "s|@etcdir@|$etcdir|" \ -e "s|@explicitlink@|$enable_explicitlink|" \ -e "s|@gfalincdir@|$gfalincdir|" \ -e "s|@srmifceincdir@|$srmifceincdir|" \ -e "s|@gfallib@|$gfallib|" \ -e "s|@gfallibdir@|$gfallibdir|" \ -e "s|@enable_xft@|$enable_xft|" \ -e "s|@glitelib@|$glitelib|" \ -e "s|@glitelibdir@|$glitelibdir|" \ -e "s|@gaw_cppflags@|$gaw_cppflags|" \ < Makefile.tmp > Makefile.tmpp mv Makefile.tmpp Makefile.tmp sed -e "s|@globusincdir@|$globusincdir|" \ -e "s|@globuslib@|$globuslib|" \ -e "s|@globuslibdir@|$globuslibdir|" \ -e "s|@glbextracflags@|$glbextracflags|" \ -e "s|@glbpatchcflags@|$glbpatchcflags|" \ -e "s|@gccxml@|$gccxml|" \ -e "s|@hdfsincdir@|$hdfsincdir|" \ -e "s|@hdfslib@|$hdfslib|" \ -e "s|@hdfslibdir@|$hdfslibdir|" \ -e "s|@iconpath@|$iconpath|" \ -e "s|@incdir@|$incdir|" \ -e "s|@jniincdir@|$jniincdir|g" \ -e "s|@jvmlibdir@|$jvmlibdir|g" \ -e "s|@jvmlib@|$jvmlib|g" \ -e "s|@krb5incdir@|$krb5incdir|" \ -e "s|@krb5lib@|$krb5lib|" \ -e "s|@krb5libdir@|$krb5libdir|" \ -e "s|@krb5extracflags@|$krb5extracflags|" \ -e "s|@krb5init@|$krb5init|" \ -e "s|@ldapincdir@|$ldapincdir|" \ -e "s|@ldaplib@|$ldaplib|" \ -e "s|@ldaplibdir@|$ldaplibdir|" \ -e "s|@ldflags@||" \ -e "s|@libdir@|$libdir|" \ -e "s|@llvmconfig@|$llvmconfig|" \ -e "s|@macrodir@|$macrodir|" \ -e "s|@mandir@|$mandir|" \ -e "s|@mkliboption@|$mkliboption|" \ -e "s|@monalisaincdir@|$monalisaincdir|" \ -e "s|@monalisalib@|$monalisalib|" \ -e "s|@monalisalibdir@|$monalisalibdir|" \ -e "s|@fftw3incdir@|$fftw3incdir|" \ -e "s|@fftw3lib@|$fftw3lib|" \ -e "s|@fftw3libdir@|$fftw3libdir|" \ -e "s|@gvizincdir@|$gvizincdir|" \ -e "s|@gvizlib@|$gvizlib|" \ -e "s|@gvizlibdir@|$gvizlibdir|" \ -e "s|@gvizcflags@|$gvizcflags|" \ -e "s|@dnssdincdir@|$dnssdincdir|" \ -e "s|@dnssdlib@|$dnssdlib|" \ -e "s|@dnssdlibdir@|$dnssdlibdir|" \ -e "s|@avahilibdir@|$avahilibdir|" \ -e "s|@mysqlincdir@|$mysqlincdir|" \ -e "s|@mysqllib@|$mysqllib|" \ -e "s|@mysqllibdir@|$mysqllibdir|" \ -e "s|@odbcincdir@|$odbcincdir|" \ -e "s|@odbclib@|$odbclib|" \ -e "s|@odbclibdir@|$odbclibdir|" \ -e "s|@openglincdir@|$openglincdir|" \ -e "s|@opengllib@|$opengllib|" \ -e "s|@opengllibdir@|$opengllibdir|" \ -e "s|@openglulib@|$openglulib|" \ -e "s|@oracleincdir@|$oracleincdir|" \ -e "s|@oraclelib@|$oraclelib|" \ -e "s|@oraclelibdir@|$oraclelibdir|" \ -e "s|@pgsqlincdir@|$pgsqlincdir|" \ -e "s|@pgsqllib@|$pgsqllib|" \ -e "s|@pgsqllibdir@|$pgsqllibdir|" \ -e "s|@pythia6lib@|$pythia6lib|" \ -e "s|@pythia6libdir@|$pythia6libdir|" \ -e "s|@pythia6cppflags@|$pythia6cppflags|" \ -e "s|@pythia8lib@|$pythia8lib|" \ -e "s|@pythia8incdir@|$pythia8incdir|" \ -e "s|@pythia8libdir@|$pythia8libdir|" \ -e "s|@pythonlib@|$pythonlib|" \ -e "s|@pythonlibdir@|$pythonlibdir|" \ -e "s|@pythonincdir@|$pythonincdir|" \ -e "s|@pythonlibflags@|$pythonlibflags|" \ -e "s|@rubylib@|$rubylib|" \ -e "s|@rubylibdir@|$rubylibdir|" \ -e "s|@rubyincdir@|$rubyincdir|" \ -e "s|@qtincdir@|$qtincdir|" \ -e "s|@qtlib@|$qtlib|" \ -e "s|@qtlibdir@|$qtlibdir|" \ -e "s|@qtvers@|$qtvers|" \ -e "s|@qtmocexe@|$qtmocexe|" \ -e "s|@resolvlib@|$resolvlib|" \ -e "s|@rootbuild@|$rootbuild|" \ -e "s|@sapdbincdir@|$sapdbincdir|" \ -e "s|@sapdblib@|$sapdblib|" \ -e "s|@sapdblibdir@|$sapdblibdir|" \ -e "s|@shadowpw@|$shadowpw|" \ -e "s|@shiftincdir@|$shiftincdir|" \ -e "s|@shiftlib@|$shiftlib|" \ -e "s|@shiftlibdir@|$shiftlibdir|" \ -e "s|@shiftcflags@|$shiftcflags|" \ < Makefile.tmp > Makefile.tmpp mv Makefile.tmpp Makefile.tmp sed -e "s|@srcdir@|$ac_srcdir|" \ -e "s|@srpincdir@|$srpincdir|" \ -e "s|@srplib@|$srplib|" \ -e "s|@srplibdir@|$srplibdir|" \ -e "s|@srputilincdir@|$srputilincdir|" \ -e "s|@srputillib@|$srputillib|" \ -e "s|@srputillibdir@|$srputillibdir|" \ -e "s|@srpextracflags@|$srpextracflags|" \ -e "s|@sslincdir@|$sslincdir|" \ -e "s|@ssllib@|$ssllib|" \ -e "s|@ssllibdir@|$ssllibdir|" \ -e "s|@sslshared@|$sslshared|" \ -e "s|@sslextracflags@|$sslextracflags|" \ -e "s|@testdir@|$testdir|" \ -e "s|@threadflag@|$threadflag|" \ -e "s|@threadlib@|$threadlib|" \ -e "s|@threadlibdir@|$threadlibdir|" \ -e "s|@top_builddir@|$top_builddir|" \ -e "s|@top_srcdir@|$top_srcdir|" \ -e "s|@ttffontdir@|$fontdir|" \ -e "s|@tutdir@|$tutdir|" \ -e "s|@winrtdebug@|$enable_winrtdebug|" \ -e "s|@xmlincdir@|$xmlincdir|" \ -e "s|@xmllib@|$xmllib|" \ -e "s|@xmllibdir@|$xmllibdir|" \ -e "s|@buildx11@|$enable_x11|" \ -e "s|@x11incdir@|$x11incdir|" \ -e "s|@x11libdir@|$x11libdir|" \ -e "s|@xpmlib@|$xpmlib|" \ -e "s|@xpmlibdir@|$xpmlibdir|" \ -e "s|@xrdlibdir@|$xrdlibdir|" \ -e "s|@xrdincdir@|$xrdincdir|" \ -e "s|@xrdincprivate@|$xrdincprivate|" \ -e "s|@xrdversion@|$decver|" \ -e "s|@hasxrdutils@|$hasxrdutils|" \ -e "s|@cfitsioincdir@|$cfitsioincdir|" \ -e "s|@cfitsiolib@|$cfitsiolib|" \ -e "s|@cfitsiolibdir@|$cfitsiolibdir|" \ -e "s|@buildfitsio@|$enable_fitsio|" \ -e "s|@buildgl@|$enable_opengl|" \ -e "s|@buildldap@|$enable_ldap|" \ -e "s|@buildmysql@|$enable_mysql|" \ -e "s|@buildpgsql@|$enable_pgsql|" \ -e "s|@buildodbc@|$enable_odbc|" \ -e "s|@buildoracle@|$enable_oracle|" \ -e "s|@buildsapdb@|$enable_sapdb|" \ -e "s|@buildqt@|$enable_qt|" \ -e "s|@buildqtgsi@|$enable_qtgsi|" \ -e "s|@buildrfio@|$enable_rfio|" \ -e "s|@buildcastor@|$enable_castor|" \ -e "s|@builddcap@|$enable_dcache|" \ -e "s|@buildfftw3@|$enable_fftw3|" \ -e "s|@buildgviz@|$enable_gviz|" \ -e "s|@buildgfal@|$enable_gfal|" \ -e "s|@buildbonjour@|$enable_bonjour|" \ -e "s|@buildchirp@|$enable_chirp|" \ -e "s|@buildhdfs@|$enable_hdfs|" \ -e "s|@buildalien@|$enable_alien|" \ -e "s|@buildasimage@|$enable_asimage|" \ -e "s|@buildpythia6@|$enable_pythia6|" \ -e "s|@buildpythia8@|$enable_pythia8|" \ -e "s|@buildpython@|$enable_python|" \ -e "s|@buildruby@|$enable_ruby|" \ -e "s|@buildxml@|$enable_xml|" \ -e "s|@extraxrdflags@|$extraxrdflags|" \ -e "s|@buildsrputil@|$enable_srputil|" \ -e "s|@buildkrb5@|$enable_krb5|" \ -e "s|@buildglobus@|$enable_globus|" \ -e "s|@buildafdsmgrd@|$enable_afdsmgrd|" \ -e "s|@afdsmgrdapmon@|$afdsmgrdapmon|" \ -e "s|@buildglite@|$enable_glite|" \ -e "s|@buildcocoa@|$enable_cocoa|" \ -e "s|@c++11@|$enable_cxx11|" \ < Makefile.tmp > $MAKEOUT rm -f Makefile.tmp if test "x$platform" = "xwin32"; then echo 'ifeq ($(ROOTSYS),)' > Makefile.tmp echo ' ROOTSYS=.' >> Makefile.tmp echo 'endif' >> Makefile.tmp sed -e 's@$(ROOTSYS)\(.*\)@$(shell cygpath -u \"$(ROOTSYS)\1 ")@' \ < $MAKEOUT >> Makefile.tmp mv -f Makefile.tmp $MAKEOUT fi result "done" #--------------------------------------------------------------------- # config/Makefile.comp # message "Writing $MAKECOMPOUT" sed -e "s|@altcc@|$altcc|" \ -e "s|@altcxx@|$altcxx|" \ -e "s|@altf77@|$altf77|" \ -e "s|@altld@|$altld|" \ < Makefile-comp.tmp > $MAKECOMPOUT rm -f Makefile-comp.tmp result "done" #--------------------------------------------------------------------- # include/RConfigure.h # message "Writing $CONFIGUREOUT" sed \ -e "s|@architecture@|$arch|" \ -e "s|@bindir@|$bindir|" \ -e "s|@cintincdir@|$cintincdir|" \ -e "s|@datadir@|$datadir|" \ -e "s|@docdir@|$docdir|" \ -e "s|@etcdir@|$etcdir|" \ -e "s|@extraiconpath@|$extraiconpath|" \ -e "s|@iconpath@|$iconpath|" \ -e "s|@incdir@|$incdir|" \ -e "s|@libdir@|$libdir|" \ -e "s|@macrodir@|$macrodir|" \ -e "s|@prefix@|$prefix|" \ -e "s|@srcdir@|$srcdir|" \ -e "s|@ttffontdir@|$fontdir|" \ -e "s|@setresuid@|$setresuid|" \ -e "s|@hasmathmore@|$hasmathmore|" \ -e "s|@haspthread@|$haspthread|" \ -e "s|@hasxft@|$hasxft|" \ -e "s|@hascling@|$hascling|" \ -e "s|@hascocoa@|$hascocoa|" \ -e "s|@usec++11@|$usecxx11|" \ < RConfigure.tmp > RConfigure-out.tmp rm -f RConfigure.tmp # only update $CONFIGUREOUT when different if test -f $CONFIGUREOUT; then diff RConfigure-out.tmp $CONFIGUREOUT > /dev/null; status=$?; if [ "$status" -ne "0" ]; then mv -f RConfigure-out.tmp $CONFIGUREOUT else rm -f RConfigure-out.tmp fi else mv -f RConfigure-out.tmp $CONFIGUREOUT fi result "done" #--------------------------------------------------------------------- # include/RConfigOptions.h # message "Writing $CONFIGOPTOUT" features="" for f in $options ; do bar="$`echo $f`" if test "x`eval echo $bar`" = "xyes" ; then feat=`echo $f | sed 's/enable_//'` if test -z "$features"; then features="$feat" else features="$features $feat" fi fi done # threads are now always enabled features="$features thread" sed \ -e "s|@configoptions@|$configoptions|" \ -e "s|@configfeatures@|$features|" \ < RConfigOptions.tmp > RConfigOptions-out.tmp rm -f RConfigOptions.tmp if test ! "x$enable_ruby" = "xno"; then echo "" >> RConfigOptions-out.tmp RUBY_MAJOR=`ruby -rrbconfig -e 'puts RbConfig::CONFIG["MAJOR"]'` RUBY_MINOR=`ruby -rrbconfig -e 'puts RbConfig::CONFIG["MINOR"]'` echo "#define R__RUBY_MAJOR $RUBY_MAJOR" >> RConfigOptions-out.tmp echo "#define R__RUBY_MINOR $RUBY_MINOR" >> RConfigOptions-out.tmp fi # only update $CONFIGOPTOUT when different if test -f $CONFIGOPTOUT; then diff RConfigOptions-out.tmp $CONFIGOPTOUT > /dev/null; status=$?; if [ "$status" -ne "0" ]; then mv -f RConfigOptions-out.tmp $CONFIGOPTOUT else rm -f RConfigOptions-out.tmp fi else mv -f RConfigOptions-out.tmp $CONFIGOPTOUT fi result "done" #--------------------------------------------------------------------- # bin/root-config # message "Writing $RCONFOUT" prefix2=$prefix bindir2=$bindir libdir2=$libdir incdir2=$incdir etcdir2=$etcdir mandir2=$mandir if test "$prefix2" = "\$(ROOTSYS)" ; then prefix2=\$ROOTSYS bindir2=\$ROOTSYS/bin libdir2=\$ROOTSYS/lib incdir2=\$ROOTSYS/include etcdir2=\$ROOTSYS/etc mandir2=\$ROOTSYS/man/man1 fi if test ! "x$altccorg" = "x" ; then altcc2="$altccorg" else altcc2="$altcc" fi if test ! "x$altcxxorg" = "x" ; then altcxx2="$altcxxorg" else altcxx2="$altcxx" fi if test ! "x$altf77org" = "x" ; then altf772="$altf77org" else altf772="$altf77" fi if test ! "x$altldorg" = "x" ; then altld2="$altldorg" else altld2="$altld" fi sed -e "s|@architecture@|$arch|" \ -e "s|@platform@|$platform|" \ -e "s|@prefix@|$prefix2|" \ -e "s|@bindir@|$bindir2|" \ -e "s|@libdir@|$libdir2|" \ -e "s|@incdir@|$incdir2|" \ -e "s|@etcdir@|$etcdir2|" \ -e "s|@features@|$features|" \ -e "s|@winrtdebug@|$enable_winrtdebug|"\ -e "s|@configargs@|$configargs|" \ -e "s|@dicttype@|$dicttype|" \ -e "s|@pythonvers@|$pythonvers|" \ -e "s|@alloclibdir@|$alloclibdir|" \ -e "s|@alloclib@|$alloclib|" \ -e "s|@altcc@|$altcc2|" \ -e "s|@altcxx@|$altcxx2|" \ -e "s|@altf77@|$altf772|" \ -e "s|@altld@|$altld2|" \ < root-config.tmp > $RCONFOUT rm -f root-config.tmp chmod 755 $RCONFOUT result "done" #--------------------------------------------------------------------- # etc/system.rootrc # message "Writing $ROOTRCOUT" sed -e "s|@libdir@|$libdir|" \ -e "s|@macrodir@|$macrodir|" \ -e "s|@plugindir@|$etcdir/plugins|" \ -e "s|@bindir@|$bindir|" \ -e "s|@etcdir@|$etcdir|" \ -e "s|@ttffontdir@|$fontdir|" \ -e "s|@iconpath@|$iconpath|" \ -e "s|@hasxrd@|$hasxrd|" \ -e "s|@hasnotxrd@|$hasnotxrd|" \ < rootrc.tmp > $ROOTRCOUT rm -f rootrc.tmp result "done" #--------------------------------------------------------------------- # etc/system.rootauthrc # message "Writing $ROOTAUTHRCOUT" sed -e "s|@havesrp@|$havesrp|" \ -e "s|@havekrb5@|$havekrb5|" \ -e "s|@haveglobus@|$haveglobus|" \ < rootauthrc.tmp > $ROOTAUTHRCOUT rm -f rootauthrc.tmp result "done" #--------------------------------------------------------------------- # etc/system.rootdaemonrc # message "Writing $ROOTDAEMONRCOUT" sed -e "s|@havesrp@|$havesrp|" \ -e "s|@havekrb5@|$havekrb5|" \ -e "s|@haveglobus@|$haveglobus|" \ < rootdaemonrc.tmp > $ROOTDAEMONRCOUT rm -f rootdaemonrc.tmp result "done" #--------------------------------------------------------------------- # etc/root.mimes # message "Writing $MIMEOUT" if test "x$platform" = "xwin32" ; then cp -f $MIMEWIN32IN $MIMEOUT else cp -f $MIMEUNIXIN $MIMEOUT fi result "done" #--------------------------------------------------------------------- # etc/daemons/rootd.rc.d # message "Writing $ROOTDOUT" sed -e "s|@bindir@|$bindir2|" \ < rootd.tmp > $ROOTDOUT chmod a+x $ROOTDOUT rm -f rootd.tmp result "done" #--------------------------------------------------------------------- # etc/daemons/rootd.xinetd # message "Writing $ROOTDXINETDOUT" sed -e "s|@bindir@|$bindir2|" \ -e "s|@prefix@|$prefix2|" \ < rootd.xinetd.tmp > $ROOTDXINETDOUT rm -f rootd.xinetd.tmp result "done" #--------------------------------------------------------------------- # etc/daemons/proofd.rc.d # message "Writing $PROOFDOUT" sed -e "s|@bindir@|$bindir2|" \ < proofd.tmp > $PROOFDOUT chmod a+x $PROOFDOUT rm -f proofd.tmp result "done" #--------------------------------------------------------------------- # etc/daemons/proofd.xinetd # message "Writing $PROOFDXINETDOUT" sed -e "s|@bindir@|$bindir2|" \ -e "s|@prefix@|$prefix2|" \ < proofd.xinetd.tmp > $PROOFDXINETDOUT rm -f proofd.xinetd.tmp result "done" #--------------------------------------------------------------------- # main/src/proofserv.sh # message "Writing $PROOFSERVOUT" sed -e "s|@bindir@|$bindir2|" \ < proofserv.tmp > $PROOFSERVOUT chmod a+x $PROOFSERVOUT rm -f proofserv.tmp result "done" #--------------------------------------------------------------------- # main/src/roots.sh # message "Writing $ROOTSOUT" sed -e "s|@bindir@|$bindir2|" \ < roots.tmp > $ROOTSOUT chmod a+x $ROOTSOUT rm -f roots.tmp result "done" #--------------------------------------------------------------------- # bin/memprobe # message "Writing $MEMPROBEOUT" if test -x /usr/bin/env ; then perlexe="/usr/bin/env perl" else perlexe=`$cwhich perl` fi sed -e "s|@perl@|$perlexe|" \ < memprobe.tmp > $MEMPROBEOUT rm -f memprobe.tmp chmod 755 $MEMPROBEOUT result "done" #--------------------------------------------------------------------- # build/misc/root-help.el # message "Writing $ROOTHELPOUT" sed -e "s|@bindir@|$bindir|" \ -e "s|@incdir@|$incdir|" \ < $ROOTHELPIN > $ROOTHELPOUT result "done" #--------------------------------------------------------------------- # macros/html.C # message "Writing $HTMLOUT" sed_args="-e s|@altf77@|$altf772|" for opt in $options; do sed_args="${sed_args} -e s|@$opt@|" if eval "test x$`eval echo $opt` = xyes"; then sed_args="${sed_args}kTRUE" else sed_args="${sed_args}kFALSE" fi sed_args="${sed_args}|g" done sed $sed_args < $HTMLIN > $HTMLOUT result done #--------------------------------------------------------------------- # bin/thisroot.sh and bin/thisroot.csh # message "Writing $THISROOTSHOUT" sed -e "s|@bindir@|$bindir2|" \ -e "s|@libdir@|$libdir2|" \ -e "s|@mandir@|$mandir2|" \ < $THISROOTSHIN > $THISROOTSHOUT result "done" message "Writing $THISROOTCSHOUT" sed -e "s|@bindir@|$bindir2|" \ -e "s|@libdir@|$libdir2|" \ -e "s|@mandir@|$mandir2|" \ < $THISROOTCSHIN > $THISROOTCSHOUT result "done" if test "x$platform" = "xwin32"; then message "Writing $THISROOTBATOUT" cp -f $THISROOTBATIN $THISROOTBATOUT result "done" else # bin/setxrd.sh and bin/setxrd.csh message "Writing $SETXRDSHOUT" cp -f $SETXRDSHIN $SETXRDSHOUT result "done" message "Writing $SETXRDCSHOUT" cp -f $SETXRDCSHIN $SETXRDCSHOUT result "done" fi #--------------------------------------------------------------------- # bin/genreflex(.bat), bin/genreflex-rootcint(.bat) # if test "x$enable_reflex" = "xyes"; then libdirreflex=$libdir if test "x$haveconfig" = "x" ; then libdirreflex='$0; if readlink $dir > /dev/null 2>\&1; then lndir=`readlink $dir`; dir=`dirname $dir`; lndir=`dirname $lndir`; dir=`cd $dir \&\& cd $lndir \&\& pwd \|\| echo $lndir`; else dir=`dirname ${dir}`; fi; dir=${dir}/../lib' fi modpath="" if test "x$platform" = "xwin32"; then modpath=';dir=`cygpath -m $dir`' fi message "Writing $GENREFLEXSHOUT" cat $GENREFLEXSHIN | sed -e "s|@libdir@|$libdirreflex$modpath|g" > $GENREFLEXSHOUT chmod a+x $GENREFLEXSHOUT result "done" if test "x$platform" = "xwin32"; then message "Writing $GENREFLEXBATOUT" if test "x$haveconfig" = "x" ; then libdirreflex='%~d0%~p0\\..\\lib' else libdirreflex=`cygpath -m $libdir` fi cat $GENREFLEXBATIN | sed -e "s|@libdir@|$libdirreflex|g" > $GENREFLEXBATOUT chmod a+x $GENREFLEXBATOUT result "done" fi message "Writing $GENREFLEXROOTCINTSHOUT" libdirreflex=$libdir if test "x$haveconfig" = "x" ; then libdirreflex='`dirname $0`/../lib' fi cat $GENREFLEXROOTCINTSHIN | sed -e "s|@libdir@|$libdirreflex|g" > $GENREFLEXROOTCINTSHOUT chmod a+x $GENREFLEXROOTCINTSHOUT result "done" if test "x$platform" = "xwin32"; then message "Writing $GENREFLEXROOTCINTBATOUT" if test "x$haveconfig" = "x" ; then libdirreflex='%~d0%~p0\\..\\lib' else libdirreflex=`cygpath -m $libdir` fi cat $GENREFLEXROOTCINTBATIN | sed -e "s|@libdir@|$libdirreflex|g" > $GENREFLEXROOTCINTBATOUT chmod a+x $GENREFLEXROOTCINTBATOUT result "done" fi else rm -f bin/genreflex* fi #--------------------------------------------------------------------- # config.status # message "Writing config.status" configargs=`echo $configargs | sed 's,\\\,\\\\,g'` echo "$configargs" > config.status result done #--------------------------------------------------------------------- # for reconfigure # touch Makefile ###################################################################### # # Show successful configure options # enabled_options="" for opt in $options; do if eval "test x$`eval echo $opt` = xyes"; then thisopt=`echo $opt | sed 's,^enable_,,'` if test "x$enabled_options" = "x"; then enabled_options="$thisopt" else enabled_options="$enabled_options, $thisopt" fi fi done if test "x$enabled_options" != "x"; then echo "" result "Enabled support for ${enabled_options}." fi ###################################################################### # ### echo %%% Final instructions # # List the possible Makefiles # if test "x$nohowto" = "xyes" ; then exit 0 fi gnumake=`echo $gnumake | sed 's,--no-print-directory,,'` result "" result "To build ROOT type:" result "" result " $gnumake" if test ! "x$haveconfig" = "x" ; then result " $gnumake install" fi result "" if test "x$issue_explicitlink_warning" = "xyes"; then result "*** Explicit linking is required for Ruby support." result "*** If lib/*.so's exist created without explicit linking," result "*** please remove them first using: rm -f lib/*.so." result "" fi exit 0