#!/bin/sh

#------------------------------------------------------------------------------
# sh config query script for Geant4 9.5.1 on UNIX platforms
# Autogenerated by CMake DO NOT EDIT
#
#------------------------------------------------------------------------------

#-----------------------------------------------------------------------------
# Determine location of this script.
# NB, we don't always use the result of this calculation, but it does not
# hurt to do it. Only possible error is if too long a chain of symbolic links
# are used to point to the physical script.
#
# Resolve symbolic links to script - we should end up with a physical file
script="$0"
calldir=`pwd`
loopcount=""

while [ "x`readlink $script`" != "x" ] ; do
  preloc=`dirname $script`
  script=`readlink $script`

  if [ ${script##/} = ${script##~} ] ; then
    # The symbolic link was relative...
    script="$preloc/$script"
  fi
  loopcount="l$loopcount"

  if [ ${#loopcount} -gt 10 ] ; then
    echo "error: more than 10 symbolic links to geant4-config traversed."
    exit 1
  fi
done

# If we still have a relative path, then it must be relative to the calling dir
# NB we don't attempt to resolve directory symbolic links or remove '.' or '..'
if [ ${script##/} = ${script##~} ] ; then
  script="$calldir/$script"
fi

#-----------------------------------------------------------------------------
# Finally, grab the directory in which the script is located
# Used below should we be setup to be relocatable.
scriptloc=`dirname $script`


#-----------------------------------------------------------------------------
# Expansion and calculation of all needed variables
#
prefix=$scriptloc/..
exec_prefix=
libdir=${prefix}/lib64
includedirs="${prefix}/include/Geant4"


name="geant4"
description="Geant4 toolkit for the simulation of the passage of particles through matter"
version="9.5.1"

# 'Requires' that may affect cflags and libs.
clhep_config_exe=/vols/escience01/martynia/MAUS-v0.9.3/third_party/build/G4beamline-2.12-source/bin/clhep-config

# Basic flags and libraries for visualization
vis_cflags="-DG4UI_USE_TCSH"

vis_libs="-lG4Tree \
-lG4FR \
-lG4GMocren \
-lG4visHepRep \
-lG4RayTracer \
-lG4VRML \
-lG4vis_management \
-lG4modeling"


#----------------------------------------------------------------------------
# Core setup...
#
cflags=""

for g4incdir in ${includedirs} ; do
  cflags="${cflags} -I${g4incdir}"
done

libs="-lG4interfaces \
-lG4persistency \
-lG4analysis \
-lG4error_propagation \
-lG4readout \
-lG4physicslists \
-lG4run \
-lG4event \
-lG4tracking \
-lG4parmodels \
-lG4processes \
-lG4digits_hits \
-lG4track \
-lG4particles \
-lG4geometry \
-lG4materials \
-lG4graphics_reps \
-lG4intercoms \
-lG4global"

#----------------------------------------------------------------------------
# Extra optional features that were enabled.
#
# - ALL
feature_list=""
geant4_uses_opengl="no"
geant4_uses_x11="no"

# - CLHEP
have_clhep="no"
feature_list="${feature_list} clhep[${have_clhep}]"

if test "x${have_clhep}" = "xno" ; then
  cflags="${cflags} `${clhep_config_exe} --include`"
fi
if test "x${have_clhep}" = "xyes" ; then
  libs="${libs} -lG4clhep"
fi

# - EXPAT
have_expat="no"
feature_list="${feature_list} expat[${have_expat}]"

if test "x${have_expat}" = "xyes" ; then
  libs="${libs} -lG4expat"
fi

# - GDML
have_gdml="no"
feature_list="${feature_list} gdml[${have_gdml}]"

if test "x${have_gdml}" = "xyes" ; then
  cflags="${cflags} -I"
fi


# - Qt
have_qt="no"
feature_list="${feature_list} qt[${have_qt}]"

if test "x${have_qt}" = "xyes" ; then
  vis_cflags="${vis_cflags} \
  -DG4INTY_USE_QT -DG4UI_USE_QT -DG4VIS_USE_OPENGLQT \
  -I \
  -I \
  -I"

  geant4_uses_opengl="yes"
fi

# - Motif
have_motif="no"
feature_list="${feature_list} motif[${have_motif}]"

if test "x${have_motif}" = "xyes" ; then
  vis_cflags="${vis_cflags} -DG4UI_USE_XM -DG4VIS_USE_OPENGLXM"
  geant4_uses_x11="yes"
  geant4_uses_opengl="yes"
fi


# - RayTracerX11
have_raytracerx11="no"
feature_list="${feature_list} raytracer-x11[${have_raytracerx11}]"

if test "x${have_raytracerx11}" = "xyes" ; then
  vis_cflags="${vis_cflags} -DG4VIS_USE_RAYTRACERX"
  geant4_uses_x11="yes"
fi


# - OpenGL with X11
have_openglx11="no"
feature_list="${feature_list} opengl-x11[${have_openglx11}]"

if test "x${have_openglx11}" = "xyes" ; then
  vis_cflags="${vis_cflags} -DG4VIS_USE_OPENGLX"
  geant4_uses_opengl="yes"
  geant4_uses_x11="yes"
fi


# - OpenInventor
# Whilst it *is* an Xt based driver, don't *think* Xt or X11 appear
# in the public interface, nor do the Inventor headers...
have_openinventor="no"
feature_list="${feature_list} openinventor[${have_openinventor}]"

if test "x${have_openinventor}" = "xyes" ; then
  vis_cflags="${vis_cflags} -DG4INTY_USE_XT -DG4VIS_USE_OI -DG4VIS_USE_OIX"
  vis_libs="-lG4OpenInventor ${vis_libs}"
fi



# - If we have any OpenGL based feature, then we need to add in the
# OpenGL global define and the G4OpenGL/G4gl2ps libraries.
if test "x${geant4_uses_opengl}" = "xyes" ; then
  vis_cflags="-DG4VIS_USE_OPENGL ${vis_cflags}"
  vis_libs="-lG4OpenGL -lG4gl2ps ${vis_libs}"
fi

# - If we have any X11 based feature, then we need the INTY_XT define and
# *may* need the X11 includes
if test "x${geant4_uses_x11}" = "xyes" ; then
  vis_cflags="-DG4INTY_USE_XT  ${vis_cflags}"
fi

#-----------------------------------------------------------------------------
# help function
#
help()
{
  cat<<EOF
Usage: geant4-config [OPTION...]
  --prefix                output installation prefix of Geant4
  --version               output version for Geant4
  --libs                  output all linker flags
  --cflags                output all preprocessor
                          and compiler flags

  --libs-without-gui      output linker flags without 
                          GUI components
  --cflags-without-gui    output preprocessor and compiler
                          flags without GUI components

  --has-feature FEATURE   output yes if FEATURE is supported,
                          or no if not supported

Known Features:
EOF
  for f in ${feature_list} ; do
    echo " $f"
  done

  cat<<EOF

Help options:
  -?, --help              show this help message
  --usage                 display brief usage message
EOF

  exit 1
}


#------------------------------------------------------------------------------
# usage function
#
usage()
{
  cat<<EOF
Usage: geant4-config [--prefix] [--version] [--libs] [--cflags]
EOF
  exit 1
}

#------------------------------------------------------------------------------
# Process arguments
#
if test $# -eq 0 ; then
  usage
fi

while test $# -gt 0 ; do
  case "$1" in
    -*=*)
      optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'`
      ;;
    *)
      optarg=
      ;;
  esac

  case "$1" in
    --prefix)
      echo ${prefix}
      ;;

    --version)
      echo ${version}
      ;;

    --libs)
      echo "-L${libdir}" ${vis_libs} ${libs}
      ;;

    --cflags)
      echo ${vis_cflags} ${cflags}
      ;;

    --libs-without-gui)
      echo "-L${libdir}" ${libs}
      ;;

    --cflags-without-gui)
      echo ${cflags}
      ;;

    --has-feature)
      shift

      case "$1" in
        clhep)
          echo ${have_gdml}
          ;;
        expat)
          echo ${have_expat}
          ;;
        gdml)
          echo ${have_gdml}
          ;;
        qt)
          echo ${have_qt}
          ;;
        motif)
          echo ${have_motif}
          ;;
        raytracer-x11)
          echo ${have_raytracerx11}
          ;;
        opengl-x11)
          echo ${have_openglx11}
          ;;
        openinventor)
          echo ${have_openinventor}
          ;;
        *)
          echo "no"
          ;;
      esac
      ;;

    -?)
      help
      ;;

    --help)
      help
      ;;

    --usage)
      usage
      ;;

    *)
      usage
      ;;
  esac

  shift
done

# Finally...
exit 0