# Makefile.in generated by automake 1.9.6 from Makefile.am. # Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. srcdir = . top_srcdir = . pkgdatadir = $(datadir)/libxslt pkglibdir = $(libdir)/libxslt pkgincludedir = $(includedir)/libxslt top_builddir = . am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = /usr/bin/install -c install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = x86_64-redhat-linux-gnu host_triplet = x86_64-redhat-linux-gnu DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/config.h.in \ $(srcdir)/libexslt.pc.in $(srcdir)/libxslt.pc.in \ $(srcdir)/libxslt.spec.in $(srcdir)/xslt-config.in \ $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ TODO acconfig.h compile config.guess config.sub depcomp \ install-sh ltmain.sh missing subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno configure.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = libxslt.pc libexslt.pc xslt-config libxslt.spec am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(confexecdir)" \ "$(DESTDIR)$(m4datadir)" "$(DESTDIR)$(pkgconfigdir)" binSCRIPT_INSTALL = $(INSTALL_SCRIPT) SCRIPTS = $(bin_SCRIPTS) SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-exec-recursive install-info-recursive \ install-recursive installcheck-recursive installdirs-recursive \ pdf-recursive ps-recursive uninstall-info-recursive \ uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; confexecDATA_INSTALL = $(INSTALL_DATA) m4dataDATA_INSTALL = $(INSTALL_DATA) pkgconfigDATA_INSTALL = $(INSTALL_DATA) DATA = $(confexec_DATA) $(m4data_DATA) $(pkgconfig_DATA) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ { test ! -d $(distdir) \ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr $(distdir); }; } DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print ACLOCAL = ${SHELL} /vols/escience01/martynia/MAUS-v0.9.4/third_party/build/libxslt-1.1.22/missing --run aclocal-1.9 AMDEP_FALSE = # AMDEP_TRUE = AMTAR = ${SHELL} /vols/escience01/martynia/MAUS-v0.9.4/third_party/build/libxslt-1.1.22/missing --run tar AR = ar AUTOCONF = ${SHELL} /vols/escience01/martynia/MAUS-v0.9.4/third_party/build/libxslt-1.1.22/missing --run autoconf AUTOHEADER = ${SHELL} /vols/escience01/martynia/MAUS-v0.9.4/third_party/build/libxslt-1.1.22/missing --run autoheader AUTOMAKE = ${SHELL} /vols/escience01/martynia/MAUS-v0.9.4/third_party/build/libxslt-1.1.22/missing --run automake-1.9 AWK = gawk CC = gcc CCDEPMODE = depmode=gcc3 CFLAGS = -g -O2 -Wall CPP = gcc -E CPPFLAGS = CXX = g++ CXXCPP = g++ -E CXXDEPMODE = depmode=gcc3 CXXFLAGS = -g -O2 CYGPATH_W = echo DEFS = -DHAVE_CONFIG_H DEPDIR = .deps ECHO = echo ECHO_C = ECHO_N = -n ECHO_T = EGREP = grep -E EXEEXT = EXSLT_INCLUDEDIR = -I${includedir} EXSLT_LIBDIR = -L${libdir} EXSLT_LIBS = -lexslt -lxslt -L/vols/escience01/martynia/MAUS-v0.9.4/third_party/install/lib -lxml2 -lz -lm -lm -lgcrypt -ldl -lgpg-error EXTRA_LIBS = -L/vols/escience01/martynia/MAUS-v0.9.4/third_party/install/lib -lxml2 -lz -lm -lm F77 = g77 FFLAGS = -g -O2 HTML_DIR = $(prefix)/doc INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s LDFLAGS = LIBEXSLT_MAJOR_VERSION = 0 LIBEXSLT_MICRO_VERSION = 13 LIBEXSLT_MINOR_VERSION = 8 LIBEXSLT_VERSION = 0.8.13 LIBEXSLT_VERSION_EXTRA = LIBEXSLT_VERSION_INFO = 8:13:8 LIBEXSLT_VERSION_NUMBER = 813 LIBGCRYPT_CFLAGS = LIBGCRYPT_CONFIG = /usr/bin/libgcrypt-config LIBGCRYPT_LIBS = -lgcrypt -ldl -lgpg-error LIBOBJS = LIBS = LIBTOOL = $(SHELL) $(top_builddir)/libtool LIBXML_CFLAGS = -I/vols/escience01/martynia/MAUS-v0.9.4/third_party/install/include/libxml2 LIBXML_LIBS = -L/vols/escience01/martynia/MAUS-v0.9.4/third_party/install/lib -lxml2 -lz -lm LIBXML_REQUIRED_VERSION = 2.6.27 LIBXML_SRC = LIBXSLT_DEFAULT_PLUGINS_PATH = /vols/escience01/martynia/MAUS-v0.9.4/third_party/install/lib/libxslt-plugins LIBXSLT_MAJOR_MINOR_VERSION = 1.1 LIBXSLT_MAJOR_VERSION = 1 LIBXSLT_MICRO_VERSION = 22 LIBXSLT_MINOR_VERSION = 1 LIBXSLT_VERSION = 1.1.22 LIBXSLT_VERSION_EXTRA = LIBXSLT_VERSION_INFO = 2:22:1 LIBXSLT_VERSION_NUMBER = 10122 LN_S = ln -s LTLIBOBJS = MAKEINFO = ${SHELL} /vols/escience01/martynia/MAUS-v0.9.4/third_party/build/libxslt-1.1.22/missing --run makeinfo MV = /bin/mv M_LIBS = -lm OBJEXT = o PACKAGE = libxslt PACKAGE_BUGREPORT = PACKAGE_NAME = PACKAGE_STRING = PACKAGE_TARNAME = PACKAGE_VERSION = PATH_SEPARATOR = : PERL = perl PYTHON = /vols/escience01/martynia/MAUS-v0.9.4/third_party/install//bin/python PYTHONSODV = PYTHON_INCLUDES = /vols/escience01/martynia/MAUS-v0.9.4/third_party/install//include/python2.7 PYTHON_SITE_PACKAGES = $(libdir)/python$(PYTHON_VERSION)/site-packages PYTHON_SUBDIR = python PYTHON_VERSION = 2.7 RANLIB = ranlib RELDATE = Fri Mar 20 2015 RM = /bin/rm SED = /bin/sed SET_MAKE = SHELL = /bin/sh STATIC_BINARIES = STRIP = strip TAR = /bin/tar VERSION = 1.1.22 WIN32_EXTRA_LDFLAGS = WIN32_EXTRA_LIBADD = WITH_CRYPTO = 1 WITH_DEBUGGER = 1 WITH_MEM_DEBUG = 0 WITH_MODULES = 1 WITH_MODULES_FALSE = # WITH_MODULES_TRUE = WITH_PERL_FALSE = # WITH_PERL_TRUE = WITH_PYTHON_FALSE = # WITH_PYTHON_TRUE = WITH_TRIO = 0 WITH_XSLT_DEBUG = 1 XML_CONFIG = xml2-config XSLTPROCDV = XSLT_INCLUDEDIR = -I${includedir} XSLT_LIBDIR = -L${libdir} XSLT_LIBS = -lxslt -L/vols/escience01/martynia/MAUS-v0.9.4/third_party/install/lib -lxml2 -lz -lm -lm ac_ct_AR = ar ac_ct_CC = gcc ac_ct_CXX = g++ ac_ct_F77 = g77 ac_ct_RANLIB = ranlib ac_ct_STRIP = strip am__fastdepCC_FALSE = # am__fastdepCC_TRUE = am__fastdepCXX_FALSE = # am__fastdepCXX_TRUE = am__include = include am__leading_dot = . am__quote = am__tar = ${AMTAR} chof - "$$tardir" am__untar = ${AMTAR} xf - bindir = ${exec_prefix}/bin build = x86_64-redhat-linux-gnu build_alias = build_cpu = x86_64 build_os = linux-gnu build_vendor = redhat datadir = ${prefix}/share exec_prefix = ${prefix} host = x86_64-redhat-linux-gnu host_alias = host_cpu = x86_64 host_os = linux-gnu host_vendor = redhat includedir = ${prefix}/include infodir = ${prefix}/info install_sh = /vols/escience01/martynia/MAUS-v0.9.4/third_party/build/libxslt-1.1.22/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec localstatedir = ${prefix}/var mandir = ${prefix}/man mkdir_p = mkdir -p -- oldincludedir = /usr/include prefix = /vols/escience01/martynia/MAUS-v0.9.4/third_party/install program_transform_name = s,x,x, pythondir = $(PYTHON_SITE_PACKAGES) sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com sysconfdir = ${prefix}/etc target_alias = SUBDIRS = \ libxslt \ libexslt \ xsltproc \ doc \ python \ tests DIST_SUBDIRS = libxslt libexslt xsltproc python doc tests confexecdir = $(libdir) confexec_DATA = xsltConf.sh bin_SCRIPTS = xslt-config CVS_EXTRA_DIST = EXTRA_DIST = xsltConf.sh.in xslt-config.in libxslt.spec libxslt.spec.in \ FEATURES TODO Copyright libxslt.m4 \ win32/libxslt/libxslt.def win32/libxslt/libxslt.dsw \ win32/libxslt/libxslt_so.dsp win32/libxslt/xsltproc.dsp \ $(CVS_EXTRA_DIST) CLEANFILES = xsltConf.sh pkgconfigdir = $(libdir)/pkgconfig pkgconfig_DATA = libxslt.pc libexslt.pc m4datadir = $(datadir)/aclocal m4data_DATA = libxslt.m4 all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ cd $(srcdir) && $(AUTOMAKE) --gnu \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) cd $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ $(MAKE) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: $(am__configure_deps) $(top_srcdir)/acconfig.h cd $(top_srcdir) && $(AUTOHEADER) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 libxslt.pc: $(top_builddir)/config.status $(srcdir)/libxslt.pc.in cd $(top_builddir) && $(SHELL) ./config.status $@ libexslt.pc: $(top_builddir)/config.status $(srcdir)/libexslt.pc.in cd $(top_builddir) && $(SHELL) ./config.status $@ xslt-config: $(top_builddir)/config.status $(srcdir)/xslt-config.in cd $(top_builddir) && $(SHELL) ./config.status $@ libxslt.spec: $(top_builddir)/config.status $(srcdir)/libxslt.spec.in cd $(top_builddir) && $(SHELL) ./config.status $@ install-binSCRIPTS: $(bin_SCRIPTS) @$(NORMAL_INSTALL) test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)" @list='$(bin_SCRIPTS)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ if test -f $$d$$p; then \ f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ echo " $(binSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(bindir)/$$f'"; \ $(binSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(bindir)/$$f"; \ else :; fi; \ done uninstall-binSCRIPTS: @$(NORMAL_UNINSTALL) @list='$(bin_SCRIPTS)'; for p in $$list; do \ f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ rm -f "$(DESTDIR)$(bindir)/$$f"; \ done mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: install-confexecDATA: $(confexec_DATA) @$(NORMAL_INSTALL) test -z "$(confexecdir)" || $(mkdir_p) "$(DESTDIR)$(confexecdir)" @list='$(confexec_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(confexecDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(confexecdir)/$$f'"; \ $(confexecDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(confexecdir)/$$f"; \ done uninstall-confexecDATA: @$(NORMAL_UNINSTALL) @list='$(confexec_DATA)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(confexecdir)/$$f'"; \ rm -f "$(DESTDIR)$(confexecdir)/$$f"; \ done install-m4dataDATA: $(m4data_DATA) @$(NORMAL_INSTALL) test -z "$(m4datadir)" || $(mkdir_p) "$(DESTDIR)$(m4datadir)" @list='$(m4data_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(m4dataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(m4datadir)/$$f'"; \ $(m4dataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(m4datadir)/$$f"; \ done uninstall-m4dataDATA: @$(NORMAL_UNINSTALL) @list='$(m4data_DATA)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(m4datadir)/$$f'"; \ rm -f "$(DESTDIR)$(m4datadir)/$$f"; \ done install-pkgconfigDATA: $(pkgconfig_DATA) @$(NORMAL_INSTALL) test -z "$(pkgconfigdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfigdir)" @list='$(pkgconfig_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \ done uninstall-pkgconfigDATA: @$(NORMAL_UNINSTALL) @list='$(pkgconfig_DATA)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \ done # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) mkdir $(distdir) $(mkdir_p) $(distdir)/. $(distdir)/libexslt $(distdir)/libxslt $(distdir)/win32/libxslt @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(mkdir_p) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ distdir) \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && cd $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' distuninstallcheck: @cd $(distuninstallcheck_dir) \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am $(MAKE) $(AM_MAKEFLAGS) check-local check: check-recursive all-am: Makefile $(SCRIPTS) $(DATA) config.h installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(confexecdir)" "$(DESTDIR)$(m4datadir)" "$(DESTDIR)$(pkgconfigdir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr \ distclean-libtool distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-m4dataDATA install-pkgconfigDATA install-exec-am: install-binSCRIPTS install-confexecDATA install-info: install-info-recursive install-man: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-binSCRIPTS uninstall-confexecDATA \ uninstall-info-am uninstall-m4dataDATA uninstall-pkgconfigDATA uninstall-info: uninstall-info-recursive .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ check-am check-local clean clean-generic clean-libtool \ clean-recursive ctags ctags-recursive dist dist-all dist-bzip2 \ dist-gzip dist-hook dist-shar dist-tarZ dist-zip distcheck \ distclean distclean-generic distclean-hdr distclean-libtool \ distclean-recursive distclean-tags distcleancheck distdir \ distuninstallcheck dvi dvi-am html html-am info info-am \ install install-am install-binSCRIPTS install-confexecDATA \ install-data install-data-am install-exec install-exec-am \ install-info install-info-am install-m4dataDATA install-man \ install-pkgconfigDATA install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic maintainer-clean-recursive \ mostlyclean mostlyclean-generic mostlyclean-libtool \ mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am uninstall-binSCRIPTS \ uninstall-confexecDATA uninstall-info-am uninstall-m4dataDATA \ uninstall-pkgconfigDATA dist-hook: cleanup libxslt.spec (cd $(srcdir) ; tar -cf - --exclude CVS --exclude .svn win32 vms examples) | (cd $(distdir); tar xf -) xsltConf.sh: xsltConf.sh.in Makefile sed -e 's?\@XSLT_LIBDIR\@?$(XSLT_LIBDIR)?g' \ -e 's?\@XSLT_INCLUDEDIR\@?$(XSLT_INCLUDEDIR)?g' \ -e 's?\@VERSION\@?$(VERSION)?g' \ -e 's?\@XSLT_LIBS\@?$(XSLT_LIBS)?g' \ < $(srcdir)/xsltConf.sh.in > xsltConf.tmp \ && mv xsltConf.tmp xsltConf.sh check-local: tests dummy: tests: dummy @echo '## Running the regression test suite' @(cd tests ; $(MAKE) MAKEFLAGS+=--silent tests) @(if [ "python" != "" ] ; then cd python ; $(MAKE) MAKEFLAGS+=--silent tests ; fi) valgrind: @echo '## Running the regression tests under Valgrind' @echo '## Go get a cup of coffee it is gonna take a while ...' @(cd tests ; $(MAKE) CHECKER='valgrind -q' tests) cleanup: -@(find . -name .\#\* -exec rm {} \;) cleantar: @(rm -f libxslt*.tar.gz) rpm: cleantar @(unset CDPATH ; $(MAKE) dist && rpmbuild -ta $(distdir).tar.gz) # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: