// @(#)root/tmva $Id$
/**********************************************************************************
 * Project   : TMVA - a Root-integrated toolkit for multivariate data analysis    *
 * Package   : TMVA                                                               *
 * Exectuable: TMVARegression                                                     *
 *                                                                                *
 * This executable provides examples for the training and testing of the          *
 * TMVA classifiers.                                                              *
 *                                                                                *
 * As input data is used a toy-MC sample consisting of four Gaussian-distributed  *
 * and linearly correlated input variables.                                       *
 *                                                                                *
 * The methods to be used can be switched on and off by means of booleans.        *
 *                                                                                *
 * Compile and run the example with the following commands                        *
 *                                                                                *
 *    make                                                                        *
 *    ./TMVARegression <Methods>                                                  *
 *                                                                                *
 * where: <Methods> = "method1 method2"                                           *
 *        are the TMVA classifier names                                           *
 *                                                                                *
 * example:                                                                       *
 *    ./TMVARegression LD MLP                                                     *
 *                                                                                *
 * If no method given, a default set is used.                                     *
 *                                                                                *
 * The output file "TMVAReg.root" can be analysed with the use of dedicated       *
 * macros (simply say: root -l <../macros/macro.C>), which can be conveniently    *
 * invoked through a GUI launched by the command                                  *
 *                                                                                *
 *    root -l ../macros/TMVAGui.C                                                 *
 **********************************************************************************/

#include <cstdlib>
#include <iostream> 
#include <map>
#include <string>

#include "TChain.h"
#include "TFile.h"
#include "TTree.h"
#include "TString.h"
#include "TObjString.h"
#include "TSystem.h"
#include "TROOT.h"

#include "TMVA/Factory.h"
#include "TMVA/Tools.h"

int main( int argc, char** argv ) 
{
   // The explicit loading of the shared libTMVA is done in TMVAlogon.C, defined in .rootrc
   // if you use your private .rootrc, or run from a different directory, please copy the 
   // corresponding lines from .rootrc

   // methods to be processed can be given as an argument; use format:
   //
   // mylinux~> root -l TMVARegression.C\(\"myMethod1,myMethod2,myMethod3\"\)
   //

   //---------------------------------------------------------------
   // Default MVA methods to be trained + tested
   std::map<std::string,int> Use;

   // --- Mutidimensional likelihood and Nearest-Neighbour methods
   Use["PDERS"]           = 0;
   Use["PDEFoam"]         = 1; 
   Use["KNN"]             = 1;
   // 
   // --- Linear Discriminant Analysis
   Use["LD"]		        = 1;
   // 
   // --- Function Discriminant analysis
   Use["FDA_GA"]          = 1;
   Use["FDA_MC"]          = 0;
   Use["FDA_MT"]          = 0;
   Use["FDA_GAMT"]        = 0;
   // 
   // --- Neural Network
   Use["MLP"]             = 1; 
   // 
   // --- Support Vector Machine 
   Use["SVM"]             = 0;
   // 
   // --- Boosted Decision Trees
   Use["BDT"]             = 1;
   Use["BDTG"]            = 0;
   // ---------------------------------------------------------------

   std::cout << std::endl;
   std::cout << "==> Start TMVARegression" << std::endl;

   // Select methods (don't look at this code - not of interest)
   if (argc>1) for (std::map<std::string,int>::iterator it = Use.begin(); it != Use.end(); it++) it->second = 0;
   for (int i=1; i<argc; i++) {
      std::string regMethod(argv[i]);
      if (Use.find(regMethod) == Use.end()) {
         std::cout << "Method \"" << regMethod << "\" not known in TMVA under this name. Choose among the following:" << std::endl;
         for (std::map<std::string,int>::iterator it = Use.begin(); it != Use.end(); it++) std::cout << it->first << " ";
         std::cout << std::endl;
         return 1;
      }
      Use[regMethod] = 1;
   }

   // --------------------------------------------------------------------------------------------------

   // --- Here the preparation phase begins

   // Create a new root output file
   TString outfileName( "TMVAReg.root" );
   TFile* outputFile = TFile::Open( outfileName, "RECREATE" );

   // Create the factory object. Later you can choose the methods
   // whose performance you'd like to investigate. The factory will
   // then run the performance analysis for you.
   //
   // The first argument is the base of the name of all the
   // weightfiles in the directory weight/ 
   //
   // The second argument is the output file for the training results
   // All TMVA output can be suppressed by removing the "!" (not) in 
   // front of the "Silent" argument in the option string
   TMVA::Factory *factory = new TMVA::Factory( "TMVARegression", outputFile, 
                                               "!V:!Silent:Color:DrawProgressBar" );

   // If you wish to modify default settings 
   // (please check "src/Config.h" to see all available global options)
   //    (TMVA::gConfig().GetVariablePlotting()).fTimesRMS = 8.0;
   //    (TMVA::gConfig().GetIONames()).fWeightFileDir = "myWeightDirectory";

   // Define the input variables that shall be used for the MVA training
   // note that you may also use variable expressions, such as: "3*var1/var2*abs(var3)"
   // [all types of expressions that can also be parsed by TTree::Draw( "expression" )]
   factory->AddVariable( "var1", "Variable 1", "units", 'F' );
   factory->AddVariable( "var2", "Variable 2", "units", 'F' );

   // You can add so-called "Spectator variables", which are not used in the MVA training, 
   // but will appear in the final "TestTree" produced by TMVA. This TestTree will contain the 
   // input variables, the response values of all trained MVAs, and the spectator variables
   factory->AddSpectator( "spec1:=var1*2",  "Spectator 1", "units", 'F' );
   factory->AddSpectator( "spec2:=var1*3",  "Spectator 2", "units", 'F' );

   // Add the variable carrying the regression target
   factory->AddTarget( "fvalue" ); 

   // It is also possible to declare additional targets for multi-dimensional regression, ie:
   // -- factory->AddTarget( "fvalue2" );
   // BUT: this is currently ONLY implemented for MLP

   // Read training and test data (see TMVAClassification for reading ASCII files)
   // load the signal and background event samples from ROOT trees
   TFile *input(0);
   TString fname = "./tmva_reg_example.root";
   if (!gSystem->AccessPathName( fname )) 
      input = TFile::Open( fname ); // check if file in local directory exists
   else 
      input = TFile::Open( "http://root.cern.ch/files/tmva_reg_example.root" ); // if not: download from ROOT server
   
   if (!input) {
      std::cout << "ERROR: could not open data file" << std::endl;
      exit(1);
   }
   std::cout << "--- TMVARegression           : Using input file: " << input->GetName() << std::endl;

   // --- Register the regression tree

   TTree *regTree = (TTree*)input->Get("TreeR");

   // global event weights per tree (see below for setting event-wise weights)
   Double_t regWeight  = 1.0;   

   // You can add an arbitrary number of regression trees
   factory->AddRegressionTree( regTree, regWeight );

   // This would set individual event weights (the variables defined in the 
   // expression need to exist in the original TTree)
   factory->SetWeightExpression( "var1", "Regression" );

   // Apply additional cuts on the signal and background samples (can be different)
   TCut mycut = ""; // for example: TCut mycut = "abs(var1)<0.5 && abs(var2-0.5)<1";

   // tell the factory to use all remaining events in the trees after training for testing:
   factory->PrepareTrainingAndTestTree( mycut, 
                                        "nTrain_Regression=0:nTest_Regression=0:SplitMode=Random:NormMode=NumEvents:!V" );

   // If no numbers of events are given, half of the events in the tree are used 
   // for training, and the other half for testing:
   //    factory->PrepareTrainingAndTestTree( mycut, "SplitMode=random:!V" );  

   // ---- Book MVA methods
   //
   // please lookup the various method configuration options in the corresponding cxx files, eg:
   // src/MethoCuts.cxx, etc, or here: http://tmva.sourceforge.net/optionRef.html
   // it is possible to preset ranges in the option string in which the cut optimisation should be done:
   // "...:CutRangeMin[2]=-1:CutRangeMax[2]=1"...", where [2] is the third input variable

   // PDE - RS method
   if (Use["PDERS"])
      factory->BookMethod( TMVA::Types::kPDERS, "PDERS", 
                           "!H:!V:NormTree=T:VolumeRangeMode=Adaptive:KernelEstimator=Gauss:GaussSigma=0.3:NEventsMin=40:NEventsMax=60:VarTransform=None" );
   // And the options strings for the MinMax and RMS methods, respectively:
   //      "!H:!V:VolumeRangeMode=MinMax:DeltaFrac=0.2:KernelEstimator=Gauss:GaussSigma=0.3" );   
   //      "!H:!V:VolumeRangeMode=RMS:DeltaFrac=3:KernelEstimator=Gauss:GaussSigma=0.3" );   

   if (Use["PDEFoam"])
       factory->BookMethod( TMVA::Types::kPDEFoam, "PDEFoam", 
			    "!H:!V:MultiTargetRegression=F:TargetSelection=Mpv:TailCut=0.001:VolFrac=0.0666:nActiveCells=500:nSampl=2000:nBin=5:Compress=T:Kernel=None:Nmin=10:VarTransform=None" );

   // K-Nearest Neighbour classifier (KNN)
   if (Use["KNN"])
      factory->BookMethod( TMVA::Types::kKNN, "KNN", 
                           "nkNN=20:ScaleFrac=0.8:SigmaFact=1.0:Kernel=Gaus:UseKernel=F:UseWeight=T:!Trim" );

   // Linear discriminant
   if (Use["LD"])
      factory->BookMethod( TMVA::Types::kLD, "LD", 
                           "!H:!V:VarTransform=None" );

	// Function discrimination analysis (FDA) -- test of various fitters - the recommended one is Minuit (or GA or SA)
   if (Use["FDA_MC"]) 
      factory->BookMethod( TMVA::Types::kFDA, "FDA_MC",
                          "!H:!V:Formula=(0)+(1)*x0+(2)*x1:ParRanges=(-100,100);(-100,100);(-100,100):FitMethod=MC:SampleSize=100000:Sigma=0.1:VarTransform=D" );
   
   if (Use["FDA_GA"]) // can also use Simulated Annealing (SA) algorithm (see Cuts_SA options) .. the formula of this example is good for parabolas
      factory->BookMethod( TMVA::Types::kFDA, "FDA_GA",
                           "!H:!V:Formula=(0)+(1)*x0+(2)*x1:ParRanges=(-100,100);(-100,100);(-100,100):FitMethod=GA:PopSize=100:Cycles=3:Steps=30:Trim=True:SaveBestGen=1:VarTransform=Norm" );

   if (Use["FDA_MT"]) 
      factory->BookMethod( TMVA::Types::kFDA, "FDA_MT",
                           "!H:!V:Formula=(0)+(1)*x0+(2)*x1:ParRanges=(-100,100);(-100,100);(-100,100);(-10,10):FitMethod=MINUIT:ErrorLevel=1:PrintLevel=-1:FitStrategy=2:UseImprove:UseMinos:SetBatch" );

   if (Use["FDA_GAMT"]) 
      factory->BookMethod( TMVA::Types::kFDA, "FDA_GAMT",
                           "!H:!V:Formula=(0)+(1)*x0+(2)*x1:ParRanges=(-100,100);(-100,100);(-100,100):FitMethod=GA:Converger=MINUIT:ErrorLevel=1:PrintLevel=-1:FitStrategy=0:!UseImprove:!UseMinos:SetBatch:Cycles=1:PopSize=5:Steps=5:Trim" );

   // Neural network (MLP)
   if (Use["MLP"])
      factory->BookMethod( TMVA::Types::kMLP, "MLP", "!H:!V:VarTransform=Norm:NeuronType=tanh:NCycles=20000:HiddenLayers=N+20:TestRate=6:TrainingMethod=BFGS:Sampling=0.3:SamplingEpoch=0.8:ConvergenceImprove=1e-6:ConvergenceTests=15:!UseRegulator" );

   // Support Vector Machine
   if (Use["SVM"])
      factory->BookMethod( TMVA::Types::kSVM, "SVM", "Gamma=0.25:Tol=0.001:VarTransform=Norm" );

   // Boosted Decision Trees
   if (Use["BDT"])
     factory->BookMethod( TMVA::Types::kBDT, "BDT",
                           "!H:!V:NTrees=100:MinNodeSize=1.0%:BoostType=AdaBoostR2:SeparationType=RegressionVariance:nCuts=20:PruneMethod=CostComplexity:PruneStrength=30" );

   if (Use["BDTG"])
     factory->BookMethod( TMVA::Types::kBDT, "BDTG",
                           "!H:!V:NTrees=2000::BoostType=Grad:Shrinkage=0.1:UseBaggedBoost:BaggedSampleFraction=0.5nCuts=20:MaxDepth=3:MaxDepth=4" );
   // --------------------------------------------------------------------------------------------------

   // ---- Now you can tell the factory to train, test, and evaluate the MVAs

   // Train MVAs using the set of training events
   factory->TrainAllMethods();

   // ---- Evaluate all MVAs using the set of test events
   factory->TestAllMethods();

   // ----- Evaluate and compare performance of all configured MVAs
   factory->EvaluateAllMethods();    

   // --------------------------------------------------------------
   
   // Save the output
   outputFile->Close();

   std::cout << "==> Wrote root file: " << outputFile->GetName() << std::endl;
   std::cout << "==> TMVARegression is done!" << std::endl;      

   delete factory;

   std::cout << std::endl;
   std::cout << "==> Too view the results, launch the GUI: \"root -l TMVARegGui.C\"" << std::endl;
   std::cout << std::endl;
}