# Makefile.in generated by automake 1.11.1 from Makefile.am. # Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # Makefile.am -- Backtrace Makefile. # Copyright (C) 2012-2014 Free Software Foundation, Inc. # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions are # met: # (1) Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # (2) Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in # the documentation and/or other materials provided with the # distribution. # (3) The name of the author may not be used to # endorse or promote products derived from this software without # specific prior written permission. # THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR # IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED # WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE # DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, # INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES # (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR # SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, # STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING # IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. VPATH = ../../src/libbacktrace pkgdatadir = $(datadir)/libbacktrace pkgincludedir = $(includedir)/libbacktrace pkglibdir = $(libdir)/libbacktrace pkglibexecdir = $(libexecdir)/libbacktrace am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = x86_64-unknown-linux-gnu host_triplet = x86_64-unknown-linux-gnu target_triplet = x86_64-unknown-linux-gnu check_PROGRAMS = $(am__EXEEXT_1) am__append_1 = btest stest subdir = . DIST_COMMON = README ChangeLog $(srcdir)/Makefile.in \ $(srcdir)/Makefile.am $(top_srcdir)/configure \ $(am__configure_deps) $(srcdir)/config.h.in \ $(srcdir)/../mkinstalldirs $(srcdir)/backtrace-supported.h.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/../config/lead-dot.m4 \ $(top_srcdir)/../config/multi.m4 \ $(top_srcdir)/../config/override.m4 \ $(top_srcdir)/../config/stdint.m4 \ $(top_srcdir)/../config/unwind_ipinfo.m4 \ $(top_srcdir)/../config/warnings.m4 \ $(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \ $(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \ $(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = backtrace-supported.h CONFIG_CLEAN_VPATH_FILES = LTLIBRARIES = $(noinst_LTLIBRARIES) am__DEPENDENCIES_1 = am_libbacktrace_la_OBJECTS = atomic.lo dwarf.lo fileline.lo posix.lo \ print.lo sort.lo state.lo libbacktrace_la_OBJECTS = $(am_libbacktrace_la_OBJECTS) am__EXEEXT_1 = btest$(EXEEXT) stest$(EXEEXT) am_btest_OBJECTS = btest-btest.$(OBJEXT) btest_OBJECTS = $(am_btest_OBJECTS) btest_DEPENDENCIES = libbacktrace.la btest_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CCLD) $(btest_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ am_stest_OBJECTS = stest.$(OBJEXT) stest_OBJECTS = $(am_stest_OBJECTS) stest_DEPENDENCIES = libbacktrace.la DEFAULT_INCLUDES = -I. -I$(srcdir) depcomp = am__depfiles_maybe = COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(libbacktrace_la_SOURCES) $(EXTRA_libbacktrace_la_SOURCES) \ $(btest_SOURCES) $(stest_SOURCES) MULTISRCTOP = MULTIBUILDTOP = MULTIDIRS = MULTISUBDIR = MULTIDO = true MULTICLEAN = true ETAGS = etags CTAGS = ctags am__tty_colors = \ red=; grn=; lgn=; blu=; std= ACLOCAL = ${SHELL} /home/mice/Grid/MAUS-v3.1.2/third_party/build/gcc-4.9.3/src/missing --run aclocal-1.11 ALLOC_FILE = mmap.lo AMTAR = ${SHELL} /home/mice/Grid/MAUS-v3.1.2/third_party/build/gcc-4.9.3/src/missing --run tar AR = ar AUTOCONF = ${SHELL} /home/mice/Grid/MAUS-v3.1.2/third_party/build/gcc-4.9.3/src/missing --run autoconf AUTOHEADER = ${SHELL} /home/mice/Grid/MAUS-v3.1.2/third_party/build/gcc-4.9.3/src/missing --run autoheader AUTOMAKE = ${SHELL} /home/mice/Grid/MAUS-v3.1.2/third_party/build/gcc-4.9.3/src/missing --run automake-1.11 AWK = gawk BACKTRACE_FILE = backtrace.lo simple.lo BACKTRACE_SUPPORTED = 1 BACKTRACE_SUPPORTS_THREADS = 1 BACKTRACE_USES_MALLOC = 0 CC = /home/mice/Grid/MAUS-v3.1.2/third_party/build/gcc-4.9.3/obj/./prev-gcc/xgcc -B/home/mice/Grid/MAUS-v3.1.2/third_party/build/gcc-4.9.3/obj/./prev-gcc/ -B/home/mice/Grid/MAUS-v3.1.2/third_party/install/x86_64-unknown-linux-gnu/bin/ -B/home/mice/Grid/MAUS-v3.1.2/third_party/install/x86_64-unknown-linux-gnu/bin/ -B/home/mice/Grid/MAUS-v3.1.2/third_party/install/x86_64-unknown-linux-gnu/lib/ -isystem /home/mice/Grid/MAUS-v3.1.2/third_party/install/x86_64-unknown-linux-gnu/include -isystem /home/mice/Grid/MAUS-v3.1.2/third_party/install/x86_64-unknown-linux-gnu/sys-include CFLAGS = -g -O2 CPP = /home/mice/Grid/MAUS-v3.1.2/third_party/build/gcc-4.9.3/obj/./prev-gcc/xgcc -B/home/mice/Grid/MAUS-v3.1.2/third_party/build/gcc-4.9.3/obj/./prev-gcc/ -B/home/mice/Grid/MAUS-v3.1.2/third_party/install/x86_64-unknown-linux-gnu/bin/ -B/home/mice/Grid/MAUS-v3.1.2/third_party/install/x86_64-unknown-linux-gnu/bin/ -B/home/mice/Grid/MAUS-v3.1.2/third_party/install/x86_64-unknown-linux-gnu/lib/ -isystem /home/mice/Grid/MAUS-v3.1.2/third_party/install/x86_64-unknown-linux-gnu/include -isystem /home/mice/Grid/MAUS-v3.1.2/third_party/install/x86_64-unknown-linux-gnu/sys-include -E CPPFLAGS = CYGPATH_W = echo DEFS = -DHAVE_CONFIG_H DSYMUTIL = DUMPBIN = ECHO_C = ECHO_N = -n ECHO_T = EGREP = /bin/grep -E EXEEXT = EXTRA_FLAGS = -funwind-tables -frandom-seed=$@ FGREP = /bin/grep -F FORMAT_FILE = elf.lo GREP = /bin/grep INSTALL = /usr/bin/install -c INSTALL_DATA = /usr/bin/install -c -m 644 INSTALL_PROGRAM = /usr/bin/install -c INSTALL_SCRIPT = /usr/bin/install -c INSTALL_STRIP_PROGRAM = $(install_sh) -c -s LD = ld -m elf_x86_64 LDFLAGS = -static-libstdc++ -static-libgcc LIBOBJS = LIBS = LIBTOOL = $(SHELL) $(top_builddir)/libtool LIPO = LN_S = ln -s LTLIBOBJS = MAINT = # MAKEINFO = /home/mice/Grid/MAUS-v3.1.2/third_party/build/gcc-4.9.3/src/missing makeinfo --split-size=5000000 --split-size=5000000 MKDIR_P = /bin/mkdir -p NM = nm NMEDIT = OBJDUMP = objdump OBJEXT = o OTOOL = OTOOL64 = PACKAGE = libbacktrace PACKAGE_BUGREPORT = PACKAGE_NAME = package-unused PACKAGE_STRING = package-unused version-unused PACKAGE_TARNAME = libbacktrace PACKAGE_URL = PACKAGE_VERSION = version-unused PATH_SEPARATOR = : PIC_FLAG = RANLIB = ranlib SED = /bin/sed SET_MAKE = SHELL = /bin/sh STRIP = strip VERSION = version-unused VIEW_FILE = mmapio.lo WARN_FLAGS = -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -Wmissing-format-attribute -Wcast-qual abs_builddir = /home/mice/Grid/MAUS-v3.1.2/third_party/build/gcc-4.9.3/obj/libbacktrace abs_srcdir = /home/mice/Grid/MAUS-v3.1.2/third_party/build/gcc-4.9.3/obj/libbacktrace/../../src/libbacktrace abs_top_builddir = /home/mice/Grid/MAUS-v3.1.2/third_party/build/gcc-4.9.3/obj/libbacktrace abs_top_srcdir = /home/mice/Grid/MAUS-v3.1.2/third_party/build/gcc-4.9.3/obj/libbacktrace/../../src/libbacktrace ac_ct_CC = ac_ct_DUMPBIN = am__leading_dot = . am__tar = ${AMTAR} chof - "$$tardir" am__untar = ${AMTAR} xf - bindir = ${exec_prefix}/bin build = x86_64-unknown-linux-gnu build_alias = x86_64-unknown-linux-gnu build_cpu = x86_64 build_os = linux-gnu build_vendor = unknown builddir = . datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dvidir = ${docdir} exec_prefix = ${prefix} host = x86_64-unknown-linux-gnu host_alias = x86_64-unknown-linux-gnu host_cpu = x86_64 host_os = linux-gnu host_vendor = unknown htmldir = ${docdir} includedir = ${prefix}/include infodir = ${datarootdir}/info install_sh = ${SHELL} /home/mice/Grid/MAUS-v3.1.2/third_party/build/gcc-4.9.3/src/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec libtool_VERSION = 1:0:0 localedir = ${datarootdir}/locale localstatedir = ${prefix}/var mandir = ${datarootdir}/man mkdir_p = /bin/mkdir -p multi_basedir = oldincludedir = /usr/include pdfdir = ${docdir} prefix = /home/mice/Grid/MAUS-v3.1.2/third_party/install program_transform_name = s,y,y, psdir = ${docdir} sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com srcdir = ../../src/libbacktrace sysconfdir = ${prefix}/etc target = x86_64-unknown-linux-gnu target_alias = x86_64-unknown-linux-gnu target_cpu = x86_64 target_os = linux-gnu target_vendor = unknown top_build_prefix = top_builddir = . top_srcdir = ../../src/libbacktrace ACLOCAL_AMFLAGS = -I .. -I ../config AM_CPPFLAGS = -I $(top_srcdir)/../include -I $(top_srcdir)/../libgcc \ -I ../libgcc AM_CFLAGS = $(EXTRA_FLAGS) $(WARN_FLAGS) $(PIC_FLAG) noinst_LTLIBRARIES = libbacktrace.la libbacktrace_la_SOURCES = \ backtrace.h \ atomic.c \ dwarf.c \ fileline.c \ internal.h \ posix.c \ print.c \ sort.c \ state.c BACKTRACE_FILES = \ backtrace.c \ simple.c \ nounwind.c FORMAT_FILES = \ elf.c \ unknown.c VIEW_FILES = \ read.c \ mmapio.c ALLOC_FILES = \ alloc.c \ mmap.c EXTRA_libbacktrace_la_SOURCES = \ $(BACKTRACE_FILES) \ $(FORMAT_FILES) \ $(VIEW_FILES) \ $(ALLOC_FILES) libbacktrace_la_LIBADD = \ $(BACKTRACE_FILE) \ $(FORMAT_FILE) \ $(VIEW_FILE) \ $(ALLOC_FILE) libbacktrace_la_DEPENDENCIES = $(libbacktrace_la_LIBADD) TESTS = $(check_PROGRAMS) btest_SOURCES = btest.c btest_CFLAGS = $(AM_CFLAGS) -g -O btest_LDADD = libbacktrace.la stest_SOURCES = stest.c stest_LDADD = libbacktrace.la # We can't use automake's automatic dependency tracking, because it # breaks when using bootstrap-lean. Automatic dependency tracking # with GCC bootstrap will cause some of the objects to depend on # header files in prev-gcc/include, e.g., stddef.h and stdarg.h. When # using bootstrap-lean, prev-gcc is removed after each stage. When # running "make install", those header files will be gone, causing the # library to be rebuilt at install time. That may not succeed. # These manual dependencies do not include dependencies on unwind.h, # even though that is part of GCC, because where to find it depends on # whether we are being built as a host library or a target library. INCDIR = $(top_srcdir)/../include all: config.h $(MAKE) $(AM_MAKEFLAGS) all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj am--refresh: @: $(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign --ignore-deps'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign --ignore-deps \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign --ignore-deps Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: # $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): # $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: # $(am__configure_deps) ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 backtrace-supported.h: $(top_builddir)/config.status $(srcdir)/backtrace-supported.h.in cd $(top_builddir) && $(SHELL) ./config.status $@ clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libbacktrace.la: $(libbacktrace_la_OBJECTS) $(libbacktrace_la_DEPENDENCIES) $(LINK) $(libbacktrace_la_OBJECTS) $(libbacktrace_la_LIBADD) $(LIBS) clean-checkPROGRAMS: @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \ echo " rm -f" $$list; \ rm -f $$list || exit $$?; \ test -n "$(EXEEXT)" || exit 0; \ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list btest$(EXEEXT): $(btest_OBJECTS) $(btest_DEPENDENCIES) @rm -f btest$(EXEEXT) $(btest_LINK) $(btest_OBJECTS) $(btest_LDADD) $(LIBS) stest$(EXEEXT): $(stest_OBJECTS) $(stest_DEPENDENCIES) @rm -f stest$(EXEEXT) $(LINK) $(stest_OBJECTS) $(stest_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c .c.o: $(COMPILE) -c $< .c.obj: $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: $(LTCOMPILE) -c -o $@ $< btest-btest.o: btest.c $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(btest_CFLAGS) $(CFLAGS) -c -o btest-btest.o `test -f 'btest.c' || echo '$(srcdir)/'`btest.c btest-btest.obj: btest.c $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(btest_CFLAGS) $(CFLAGS) -c -o btest-btest.obj `if test -f 'btest.c'; then $(CYGPATH_W) 'btest.c'; else $(CYGPATH_W) '$(srcdir)/btest.c'; fi` mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool config.lt # GNU Make needs to see an explicit $(MAKE) variable in the command it # runs to enable its job server during parallel builds. Hence the # comments below. all-multi: $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE) install-multi: $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE) mostlyclean-multi: $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE) clean-multi: $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE) distclean-multi: $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE) maintainer-clean-multi: $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE) ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags check-TESTS: $(TESTS) @failed=0; all=0; xfail=0; xpass=0; skip=0; \ srcdir=$(srcdir); export srcdir; \ list=' $(TESTS) '; \ $(am__tty_colors); \ if test -n "$$list"; then \ for tst in $$list; do \ if test -f ./$$tst; then dir=./; \ elif test -f $$tst; then dir=; \ else dir="$(srcdir)/"; fi; \ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ all=`expr $$all + 1`; \ case " $(XFAIL_TESTS) " in \ *[\ \ ]$$tst[\ \ ]*) \ xpass=`expr $$xpass + 1`; \ failed=`expr $$failed + 1`; \ col=$$red; res=XPASS; \ ;; \ *) \ col=$$grn; res=PASS; \ ;; \ esac; \ elif test $$? -ne 77; then \ all=`expr $$all + 1`; \ case " $(XFAIL_TESTS) " in \ *[\ \ ]$$tst[\ \ ]*) \ xfail=`expr $$xfail + 1`; \ col=$$lgn; res=XFAIL; \ ;; \ *) \ failed=`expr $$failed + 1`; \ col=$$red; res=FAIL; \ ;; \ esac; \ else \ skip=`expr $$skip + 1`; \ col=$$blu; res=SKIP; \ fi; \ echo "$${col}$$res$${std}: $$tst"; \ done; \ if test "$$all" -eq 1; then \ tests="test"; \ All=""; \ else \ tests="tests"; \ All="All "; \ fi; \ if test "$$failed" -eq 0; then \ if test "$$xfail" -eq 0; then \ banner="$$All$$all $$tests passed"; \ else \ if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \ banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \ fi; \ else \ if test "$$xpass" -eq 0; then \ banner="$$failed of $$all $$tests failed"; \ else \ if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \ banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \ fi; \ fi; \ dashes="$$banner"; \ skipped=""; \ if test "$$skip" -ne 0; then \ if test "$$skip" -eq 1; then \ skipped="($$skip test was not run)"; \ else \ skipped="($$skip tests were not run)"; \ fi; \ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ dashes="$$skipped"; \ fi; \ report=""; \ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ report="Please report to $(PACKAGE_BUGREPORT)"; \ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ dashes="$$report"; \ fi; \ dashes=`echo "$$dashes" | sed s/./=/g`; \ if test "$$failed" -eq 0; then \ echo "$$grn$$dashes"; \ else \ echo "$$red$$dashes"; \ fi; \ echo "$$banner"; \ test -z "$$skipped" || echo "$$skipped"; \ test -z "$$report" || echo "$$report"; \ echo "$$dashes$$std"; \ test "$$failed" -eq 0; \ else :; fi check-am: all-am $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: check-am all-am: Makefile $(LTLIBRARIES) all-multi config.h installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-multi clean-am: clean-checkPROGRAMS clean-generic clean-libtool \ clean-noinstLTLIBRARIES mostlyclean-am distclean: distclean-am distclean-multi -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-hdr distclean-libtool distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-multi install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am maintainer-clean-multi -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-multi mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: .MAKE: all all-multi check-am clean-multi distclean-multi install-am \ install-multi install-strip maintainer-clean-multi \ mostlyclean-multi .PHONY: CTAGS GTAGS all all-am all-multi am--refresh check check-TESTS \ check-am clean clean-checkPROGRAMS clean-generic clean-libtool \ clean-multi clean-noinstLTLIBRARIES ctags distclean \ distclean-compile distclean-generic distclean-hdr \ distclean-libtool distclean-multi distclean-tags dvi dvi-am \ html html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-multi install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic maintainer-clean-multi mostlyclean \ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ mostlyclean-multi pdf pdf-am ps ps-am tags uninstall \ uninstall-am alloc.lo: config.h backtrace.h internal.h backtrace.lo: config.h backtrace.h btest.lo: (INCDIR)/filenames.h backtrace.h backtrace-supported.h dwarf.lo: config.h $(INCDIR)/dwarf2.h $(INCDIR)/dwarf2.def \ $(INCDIR)/filenames.h backtrace.h internal.h elf.lo: config.h backtrace.h internal.h fileline.lo: config.h backtrace.h internal.h mmap.lo: config.h backtrace.h internal.h mmapio.lo: config.h backtrace.h internal.h nounwind.lo: config.h internal.h posix.lo: config.h backtrace.h internal.h print.lo: config.h backtrace.h internal.h read.lo: config.h backtrace.h internal.h simple.lo: config.h backtrace.h internal.h state.lo: config.h backtrace.h backtrace-supported.h internal.h unknown.lo: config.h backtrace.h internal.h # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: