This is make.info, produced by makeinfo version 5.2 from make.texi.

This file documents the GNU 'make' utility, which determines
automatically which pieces of a large program need to be recompiled, and
issues the commands to recompile them.

   This is Edition 0.73, last updated 5 October 2014, of 'The GNU Make
Manual', for GNU 'make' version 4.1.

   Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
1997, 1998, 1999, 2000, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
2010, 2011, 2012, 2013, 2014 Free Software Foundation, Inc.

     Permission is granted to copy, distribute and/or modify this
     document under the terms of the GNU Free Documentation License,
     Version 1.3 or any later version published by the Free Software
     Foundation; with no Invariant Sections, with the Front-Cover Texts
     being "A GNU Manual," and with the Back-Cover Texts as in (a)
     below.  A copy of the license is included in the section entitled
     "GNU Free Documentation License."

     (a) The FSF's Back-Cover Text is: "You have the freedom to copy and
     modify this GNU manual.  Buying copies from the FSF supports it in
     developing GNU and promoting software freedom."
INFO-DIR-SECTION Software development
START-INFO-DIR-ENTRY
* Make: (make).            Remake files automatically.
END-INFO-DIR-ENTRY


File: make.info,  Node: Implicit Rules,  Next: Archives,  Prev: Running,  Up: Top

10 Using Implicit Rules
***********************

Certain standard ways of remaking target files are used very often.  For
example, one customary way to make an object file is from a C source
file using the C compiler, 'cc'.

   "Implicit rules" tell 'make' how to use customary techniques so that
you do not have to specify them in detail when you want to use them.
For example, there is an implicit rule for C compilation.  File names
determine which implicit rules are run.  For example, C compilation
typically takes a '.c' file and makes a '.o' file.  So 'make' applies
the implicit rule for C compilation when it sees this combination of
file name endings.

   A chain of implicit rules can apply in sequence; for example, 'make'
will remake a '.o' file from a '.y' file by way of a '.c' file.

   The built-in implicit rules use several variables in their recipes so
that, by changing the values of the variables, you can change the way
the implicit rule works.  For example, the variable 'CFLAGS' controls
the flags given to the C compiler by the implicit rule for C
compilation.

   You can define your own implicit rules by writing "pattern rules".

   "Suffix rules" are a more limited way to define implicit rules.
Pattern rules are more general and clearer, but suffix rules are
retained for compatibility.

* Menu:

* Using Implicit::              How to use an existing implicit rule
                                  to get the recipes for updating a file.
* Catalogue of Rules::          A list of built-in rules.
* Implicit Variables::          How to change what predefined rules do.
* Chained Rules::               How to use a chain of implicit rules.
* Pattern Rules::               How to define new implicit rules.
* Last Resort::                 How to define a recipe for rules which
                                  cannot find any.
* Suffix Rules::                The old-fashioned style of implicit rule.
* Implicit Rule Search::        The precise algorithm for applying
                                  implicit rules.


File: make.info,  Node: Using Implicit,  Next: Catalogue of Rules,  Prev: Implicit Rules,  Up: Implicit Rules

10.1 Using Implicit Rules
=========================

To allow 'make' to find a customary method for updating a target file,
all you have to do is refrain from specifying recipes yourself.  Either
write a rule with no recipe, or don't write a rule at all.  Then 'make'
will figure out which implicit rule to use based on which kind of source
file exists or can be made.

   For example, suppose the makefile looks like this:

     foo : foo.o bar.o
             cc -o foo foo.o bar.o $(CFLAGS) $(LDFLAGS)

Because you mention 'foo.o' but do not give a rule for it, 'make' will
automatically look for an implicit rule that tells how to update it.
This happens whether or not the file 'foo.o' currently exists.

   If an implicit rule is found, it can supply both a recipe and one or
more prerequisites (the source files).  You would want to write a rule
for 'foo.o' with no recipe if you need to specify additional
prerequisites, such as header files, that the implicit rule cannot
supply.

   Each implicit rule has a target pattern and prerequisite patterns.
There may be many implicit rules with the same target pattern.  For
example, numerous rules make '.o' files: one, from a '.c' file with the
C compiler; another, from a '.p' file with the Pascal compiler; and so
on.  The rule that actually applies is the one whose prerequisites exist
or can be made.  So, if you have a file 'foo.c', 'make' will run the C
compiler; otherwise, if you have a file 'foo.p', 'make' will run the
Pascal compiler; and so on.

   Of course, when you write the makefile, you know which implicit rule
you want 'make' to use, and you know it will choose that one because you
know which possible prerequisite files are supposed to exist.  *Note
Catalogue of Built-In Rules: Catalogue of Rules, for a catalogue of all
the predefined implicit rules.

   Above, we said an implicit rule applies if the required prerequisites
"exist or can be made".  A file "can be made" if it is mentioned
explicitly in the makefile as a target or a prerequisite, or if an
implicit rule can be recursively found for how to make it.  When an
implicit prerequisite is the result of another implicit rule, we say
that "chaining" is occurring.  *Note Chains of Implicit Rules: Chained
Rules.

   In general, 'make' searches for an implicit rule for each target, and
for each double-colon rule, that has no recipe.  A file that is
mentioned only as a prerequisite is considered a target whose rule
specifies nothing, so implicit rule search happens for it.  *Note
Implicit Rule Search Algorithm: Implicit Rule Search, for the details of
how the search is done.

   Note that explicit prerequisites do not influence implicit rule
search.  For example, consider this explicit rule:

     foo.o: foo.p

The prerequisite on 'foo.p' does not necessarily mean that 'make' will
remake 'foo.o' according to the implicit rule to make an object file, a
'.o' file, from a Pascal source file, a '.p' file.  For example, if
'foo.c' also exists, the implicit rule to make an object file from a C
source file is used instead, because it appears before the Pascal rule
in the list of predefined implicit rules (*note Catalogue of Built-In
Rules: Catalogue of Rules.).

   If you do not want an implicit rule to be used for a target that has
no recipe, you can give that target an empty recipe by writing a
semicolon (*note Defining Empty Recipes: Empty Recipes.).


File: make.info,  Node: Catalogue of Rules,  Next: Implicit Variables,  Prev: Using Implicit,  Up: Implicit Rules

10.2 Catalogue of Built-In Rules
================================

Here is a catalogue of predefined implicit rules which are always
available unless the makefile explicitly overrides or cancels them.
*Note Canceling Implicit Rules: Canceling Rules, for information on
canceling or overriding an implicit rule.  The '-r' or
'--no-builtin-rules' option cancels all predefined rules.

   This manual only documents the default rules available on POSIX-based
operating systems.  Other operating systems, such as VMS, Windows, OS/2,
etc.  may have different sets of default rules.  To see the full list of
default rules and variables available in your version of GNU 'make', run
'make -p' in a directory with no makefile.

   Not all of these rules will always be defined, even when the '-r'
option is not given.  Many of the predefined implicit rules are
implemented in 'make' as suffix rules, so which ones will be defined
depends on the "suffix list" (the list of prerequisites of the special
target '.SUFFIXES').  The default suffix list is: '.out', '.a', '.ln',
'.o', '.c', '.cc', '.C', '.cpp', '.p', '.f', '.F', '.m', '.r', '.y',
'.l', '.ym', '.lm', '.s', '.S', '.mod', '.sym', '.def', '.h', '.info',
'.dvi', '.tex', '.texinfo', '.texi', '.txinfo', '.w', '.ch' '.web',
'.sh', '.elc', '.el'.  All of the implicit rules described below whose
prerequisites have one of these suffixes are actually suffix rules.  If
you modify the suffix list, the only predefined suffix rules in effect
will be those named by one or two of the suffixes that are on the list
you specify; rules whose suffixes fail to be on the list are disabled.
*Note Old-Fashioned Suffix Rules: Suffix Rules, for full details on
suffix rules.

Compiling C programs
     'N.o' is made automatically from 'N.c' with a recipe of the form
     '$(CC) $(CPPFLAGS) $(CFLAGS) -c'.

Compiling C++ programs
     'N.o' is made automatically from 'N.cc', 'N.cpp', or 'N.C' with a
     recipe of the form '$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c'.  We
     encourage you to use the suffix '.cc' for C++ source files instead
     of '.C'.

Compiling Pascal programs
     'N.o' is made automatically from 'N.p' with the recipe '$(PC)
     $(PFLAGS) -c'.

Compiling Fortran and Ratfor programs
     'N.o' is made automatically from 'N.r', 'N.F' or 'N.f' by running
     the Fortran compiler.  The precise recipe used is as follows:

     '.f'
          '$(FC) $(FFLAGS) -c'.
     '.F'
          '$(FC) $(FFLAGS) $(CPPFLAGS) -c'.
     '.r'
          '$(FC) $(FFLAGS) $(RFLAGS) -c'.

Preprocessing Fortran and Ratfor programs
     'N.f' is made automatically from 'N.r' or 'N.F'.  This rule runs
     just the preprocessor to convert a Ratfor or preprocessable Fortran
     program into a strict Fortran program.  The precise recipe used is
     as follows:

     '.F'
          '$(FC) $(CPPFLAGS) $(FFLAGS) -F'.
     '.r'
          '$(FC) $(FFLAGS) $(RFLAGS) -F'.

Compiling Modula-2 programs
     'N.sym' is made from 'N.def' with a recipe of the form '$(M2C)
     $(M2FLAGS) $(DEFFLAGS)'.  'N.o' is made from 'N.mod'; the form is:
     '$(M2C) $(M2FLAGS) $(MODFLAGS)'.

Assembling and preprocessing assembler programs
     'N.o' is made automatically from 'N.s' by running the assembler,
     'as'.  The precise recipe is '$(AS) $(ASFLAGS)'.

     'N.s' is made automatically from 'N.S' by running the C
     preprocessor, 'cpp'.  The precise recipe is '$(CPP) $(CPPFLAGS)'.

Linking a single object file
     'N' is made automatically from 'N.o' by running the linker (usually
     called 'ld') via the C compiler.  The precise recipe used is
     '$(CC) $(LDFLAGS) N.o $(LOADLIBES) $(LDLIBS)'.

     This rule does the right thing for a simple program with only one
     source file.  It will also do the right thing if there are multiple
     object files (presumably coming from various other source files),
     one of which has a name matching that of the executable file.
     Thus,

          x: y.o z.o

     when 'x.c', 'y.c' and 'z.c' all exist will execute:

          cc -c x.c -o x.o
          cc -c y.c -o y.o
          cc -c z.c -o z.o
          cc x.o y.o z.o -o x
          rm -f x.o
          rm -f y.o
          rm -f z.o

     In more complicated cases, such as when there is no object file
     whose name derives from the executable file name, you must write an
     explicit recipe for linking.

     Each kind of file automatically made into '.o' object files will be
     automatically linked by using the compiler ('$(CC)', '$(FC)' or
     '$(PC)'; the C compiler '$(CC)' is used to assemble '.s' files)
     without the '-c' option.  This could be done by using the '.o'
     object files as intermediates, but it is faster to do the compiling
     and linking in one step, so that's how it's done.

Yacc for C programs
     'N.c' is made automatically from 'N.y' by running Yacc with the
     recipe '$(YACC) $(YFLAGS)'.

Lex for C programs
     'N.c' is made automatically from 'N.l' by running Lex.  The actual
     recipe is '$(LEX) $(LFLAGS)'.

Lex for Ratfor programs
     'N.r' is made automatically from 'N.l' by running Lex.  The actual
     recipe is '$(LEX) $(LFLAGS)'.

     The convention of using the same suffix '.l' for all Lex files
     regardless of whether they produce C code or Ratfor code makes it
     impossible for 'make' to determine automatically which of the two
     languages you are using in any particular case.  If 'make' is
     called upon to remake an object file from a '.l' file, it must
     guess which compiler to use.  It will guess the C compiler, because
     that is more common.  If you are using Ratfor, make sure 'make'
     knows this by mentioning 'N.r' in the makefile.  Or, if you are
     using Ratfor exclusively, with no C files, remove '.c' from the
     list of implicit rule suffixes with:

          .SUFFIXES:
          .SUFFIXES: .o .r .f .l ...

Making Lint Libraries from C, Yacc, or Lex programs
     'N.ln' is made from 'N.c' by running 'lint'.  The precise recipe is
     '$(LINT) $(LINTFLAGS) $(CPPFLAGS) -i'.  The same recipe is used on
     the C code produced from 'N.y' or 'N.l'.

TeX and Web
     'N.dvi' is made from 'N.tex' with the recipe '$(TEX)'.  'N.tex' is
     made from 'N.web' with '$(WEAVE)', or from 'N.w' (and from 'N.ch'
     if it exists or can be made) with '$(CWEAVE)'.  'N.p' is made from
     'N.web' with '$(TANGLE)' and 'N.c' is made from 'N.w' (and from
     'N.ch' if it exists or can be made) with '$(CTANGLE)'.

Texinfo and Info
     'N.dvi' is made from 'N.texinfo', 'N.texi', or 'N.txinfo', with the
     recipe '$(TEXI2DVI) $(TEXI2DVI_FLAGS)'.  'N.info' is made from
     'N.texinfo', 'N.texi', or 'N.txinfo', with the recipe
     '$(MAKEINFO) $(MAKEINFO_FLAGS)'.

RCS
     Any file 'N' is extracted if necessary from an RCS file named
     either 'N,v' or 'RCS/N,v'.  The precise recipe used is
     '$(CO) $(COFLAGS)'.  'N' will not be extracted from RCS if it
     already exists, even if the RCS file is newer.  The rules for RCS
     are terminal (*note Match-Anything Pattern Rules: Match-Anything
     Rules.), so RCS files cannot be generated from another source; they
     must actually exist.

SCCS
     Any file 'N' is extracted if necessary from an SCCS file named
     either 's.N' or 'SCCS/s.N'.  The precise recipe used is
     '$(GET) $(GFLAGS)'.  The rules for SCCS are terminal (*note
     Match-Anything Pattern Rules: Match-Anything Rules.), so SCCS files
     cannot be generated from another source; they must actually exist.

     For the benefit of SCCS, a file 'N' is copied from 'N.sh' and made
     executable (by everyone).  This is for shell scripts that are
     checked into SCCS. Since RCS preserves the execution permission of
     a file, you do not need to use this feature with RCS.

     We recommend that you avoid using of SCCS. RCS is widely held to be
     superior, and is also free.  By choosing free software in place of
     comparable (or inferior) proprietary software, you support the free
     software movement.

   Usually, you want to change only the variables listed in the table
above, which are documented in the following section.

   However, the recipes in built-in implicit rules actually use
variables such as 'COMPILE.c', 'LINK.p', and 'PREPROCESS.S', whose
values contain the recipes listed above.

   'make' follows the convention that the rule to compile a '.X' source
file uses the variable 'COMPILE.X'.  Similarly, the rule to produce an
executable from a '.X' file uses 'LINK.X'; and the rule to preprocess a
'.X' file uses 'PREPROCESS.X'.

   Every rule that produces an object file uses the variable
'OUTPUT_OPTION'.  'make' defines this variable either to contain '-o
$@', or to be empty, depending on a compile-time option.  You need the
'-o' option to ensure that the output goes into the right file when the
source file is in a different directory, as when using 'VPATH' (*note
Directory Search::).  However, compilers on some systems do not accept a
'-o' switch for object files.  If you use such a system, and use
'VPATH', some compilations will put their output in the wrong place.  A
possible workaround for this problem is to give 'OUTPUT_OPTION' the
value '; mv $*.o $@'.


File: make.info,  Node: Implicit Variables,  Next: Chained Rules,  Prev: Catalogue of Rules,  Up: Implicit Rules

10.3 Variables Used by Implicit Rules
=====================================

The recipes in built-in implicit rules make liberal use of certain
predefined variables.  You can alter the values of these variables in
the makefile, with arguments to 'make', or in the environment to alter
how the implicit rules work without redefining the rules themselves.
You can cancel all variables used by implicit rules with the '-R' or
'--no-builtin-variables' option.

   For example, the recipe used to compile a C source file actually says
'$(CC) -c $(CFLAGS) $(CPPFLAGS)'.  The default values of the variables
used are 'cc' and nothing, resulting in the command 'cc -c'.  By
redefining 'CC' to 'ncc', you could cause 'ncc' to be used for all C
compilations performed by the implicit rule.  By redefining 'CFLAGS' to
be '-g', you could pass the '-g' option to each compilation.  _All_
implicit rules that do C compilation use '$(CC)' to get the program name
for the compiler and _all_ include '$(CFLAGS)' among the arguments given
to the compiler.

   The variables used in implicit rules fall into two classes: those
that are names of programs (like 'CC') and those that contain arguments
for the programs (like 'CFLAGS').  (The "name of a program" may also
contain some command arguments, but it must start with an actual
executable program name.)  If a variable value contains more than one
argument, separate them with spaces.

   The following tables describe of some of the more commonly-used
predefined variables.  This list is not exhaustive, and the default
values shown here may not be what 'make' selects for your environment.
To see the complete list of predefined variables for your instance of
GNU 'make' you can run 'make -p' in a directory with no makefiles.

   Here is a table of some of the more common variables used as names of
programs in built-in rules:

'AR'
     Archive-maintaining program; default 'ar'.

'AS'
     Program for compiling assembly files; default 'as'.

'CC'
     Program for compiling C programs; default 'cc'.

'CXX'
     Program for compiling C++ programs; default 'g++'.

'CPP'
     Program for running the C preprocessor, with results to standard
     output; default '$(CC) -E'.

'FC'
     Program for compiling or preprocessing Fortran and Ratfor programs;
     default 'f77'.

'M2C'
     Program to use to compile Modula-2 source code; default 'm2c'.

'PC'
     Program for compiling Pascal programs; default 'pc'.

'CO'
     Program for extracting a file from RCS; default 'co'.

'GET'
     Program for extracting a file from SCCS; default 'get'.

'LEX'
     Program to use to turn Lex grammars into source code; default
     'lex'.

'YACC'
     Program to use to turn Yacc grammars into source code; default
     'yacc'.

'LINT'
     Program to use to run lint on source code; default 'lint'.

'MAKEINFO'
     Program to convert a Texinfo source file into an Info file; default
     'makeinfo'.

'TEX'
     Program to make TeX DVI files from TeX source; default 'tex'.

'TEXI2DVI'
     Program to make TeX DVI files from Texinfo source; default
     'texi2dvi'.

'WEAVE'
     Program to translate Web into TeX; default 'weave'.

'CWEAVE'
     Program to translate C Web into TeX; default 'cweave'.

'TANGLE'
     Program to translate Web into Pascal; default 'tangle'.

'CTANGLE'
     Program to translate C Web into C; default 'ctangle'.

'RM'
     Command to remove a file; default 'rm -f'.

   Here is a table of variables whose values are additional arguments
for the programs above.  The default values for all of these is the
empty string, unless otherwise noted.

'ARFLAGS'
     Flags to give the archive-maintaining program; default 'rv'.

'ASFLAGS'
     Extra flags to give to the assembler (when explicitly invoked on a
     '.s' or '.S' file).

'CFLAGS'
     Extra flags to give to the C compiler.

'CXXFLAGS'
     Extra flags to give to the C++ compiler.

'COFLAGS'
     Extra flags to give to the RCS 'co' program.

'CPPFLAGS'
     Extra flags to give to the C preprocessor and programs that use it
     (the C and Fortran compilers).

'FFLAGS'
     Extra flags to give to the Fortran compiler.

'GFLAGS'
     Extra flags to give to the SCCS 'get' program.

'LDFLAGS'
     Extra flags to give to compilers when they are supposed to invoke
     the linker, 'ld', such as '-L'.  Libraries ('-lfoo') should be
     added to the 'LDLIBS' variable instead.

'LDLIBS'
     Library flags or names given to compilers when they are supposed to
     invoke the linker, 'ld'.  'LOADLIBES' is a deprecated (but still
     supported) alternative to 'LDLIBS'.  Non-library linker flags, such
     as '-L', should go in the 'LDFLAGS' variable.

'LFLAGS'
     Extra flags to give to Lex.

'YFLAGS'
     Extra flags to give to Yacc.

'PFLAGS'
     Extra flags to give to the Pascal compiler.

'RFLAGS'
     Extra flags to give to the Fortran compiler for Ratfor programs.

'LINTFLAGS'
     Extra flags to give to lint.


File: make.info,  Node: Chained Rules,  Next: Pattern Rules,  Prev: Implicit Variables,  Up: Implicit Rules

10.4 Chains of Implicit Rules
=============================

Sometimes a file can be made by a sequence of implicit rules.  For
example, a file 'N.o' could be made from 'N.y' by running first Yacc and
then 'cc'.  Such a sequence is called a "chain".

   If the file 'N.c' exists, or is mentioned in the makefile, no special
searching is required: 'make' finds that the object file can be made by
C compilation from 'N.c'; later on, when considering how to make 'N.c',
the rule for running Yacc is used.  Ultimately both 'N.c' and 'N.o' are
updated.

   However, even if 'N.c' does not exist and is not mentioned, 'make'
knows how to envision it as the missing link between 'N.o' and 'N.y'!
In this case, 'N.c' is called an "intermediate file".  Once 'make' has
decided to use the intermediate file, it is entered in the data base as
if it had been mentioned in the makefile, along with the implicit rule
that says how to create it.

   Intermediate files are remade using their rules just like all other
files.  But intermediate files are treated differently in two ways.

   The first difference is what happens if the intermediate file does
not exist.  If an ordinary file B does not exist, and 'make' considers a
target that depends on B, it invariably creates B and then updates the
target from B.  But if B is an intermediate file, then 'make' can leave
well enough alone.  It won't bother updating B, or the ultimate target,
unless some prerequisite of B is newer than that target or there is some
other reason to update that target.

   The second difference is that if 'make' _does_ create B in order to
update something else, it deletes B later on after it is no longer
needed.  Therefore, an intermediate file which did not exist before
'make' also does not exist after 'make'.  'make' reports the deletion to
you by printing a 'rm -f' command showing which file it is deleting.

   Ordinarily, a file cannot be intermediate if it is mentioned in the
makefile as a target or prerequisite.  However, you can explicitly mark
a file as intermediate by listing it as a prerequisite of the special
target '.INTERMEDIATE'.  This takes effect even if the file is mentioned
explicitly in some other way.

   You can prevent automatic deletion of an intermediate file by marking
it as a "secondary" file.  To do this, list it as a prerequisite of the
special target '.SECONDARY'.  When a file is secondary, 'make' will not
create the file merely because it does not already exist, but 'make'
does not automatically delete the file.  Marking a file as secondary
also marks it as intermediate.

   You can list the target pattern of an implicit rule (such as '%.o')
as a prerequisite of the special target '.PRECIOUS' to preserve
intermediate files made by implicit rules whose target patterns match
that file's name; see *note Interrupts::.

   A chain can involve more than two implicit rules.  For example, it is
possible to make a file 'foo' from 'RCS/foo.y,v' by running RCS, Yacc
and 'cc'.  Then both 'foo.y' and 'foo.c' are intermediate files that are
deleted at the end.

   No single implicit rule can appear more than once in a chain.  This
means that 'make' will not even consider such a ridiculous thing as
making 'foo' from 'foo.o.o' by running the linker twice.  This
constraint has the added benefit of preventing any infinite loop in the
search for an implicit rule chain.

   There are some special implicit rules to optimize certain cases that
would otherwise be handled by rule chains.  For example, making 'foo'
from 'foo.c' could be handled by compiling and linking with separate
chained rules, using 'foo.o' as an intermediate file.  But what actually
happens is that a special rule for this case does the compilation and
linking with a single 'cc' command.  The optimized rule is used in
preference to the step-by-step chain because it comes earlier in the
ordering of rules.


File: make.info,  Node: Pattern Rules,  Next: Last Resort,  Prev: Chained Rules,  Up: Implicit Rules

10.5 Defining and Redefining Pattern Rules
==========================================

You define an implicit rule by writing a "pattern rule".  A pattern rule
looks like an ordinary rule, except that its target contains the
character '%' (exactly one of them).  The target is considered a pattern
for matching file names; the '%' can match any nonempty substring, while
other characters match only themselves.  The prerequisites likewise use
'%' to show how their names relate to the target name.

   Thus, a pattern rule '%.o : %.c' says how to make any file 'STEM.o'
from another file 'STEM.c'.

   Note that expansion using '%' in pattern rules occurs *after* any
variable or function expansions, which take place when the makefile is
read.  *Note How to Use Variables: Using Variables, and *note Functions
for Transforming Text: Functions.

* Menu:

* Pattern Intro::               An introduction to pattern rules.
* Pattern Examples::            Examples of pattern rules.
* Automatic Variables::         How to use automatic variables in the
                                  recipe of implicit rules.
* Pattern Match::               How patterns match.
* Match-Anything Rules::        Precautions you should take prior to
                                  defining rules that can match any
                                  target file whatever.
* Canceling Rules::             How to override or cancel built-in rules.


File: make.info,  Node: Pattern Intro,  Next: Pattern Examples,  Prev: Pattern Rules,  Up: Pattern Rules

10.5.1 Introduction to Pattern Rules
------------------------------------

A pattern rule contains the character '%' (exactly one of them) in the
target; otherwise, it looks exactly like an ordinary rule.  The target
is a pattern for matching file names; the '%' matches any nonempty
substring, while other characters match only themselves.

   For example, '%.c' as a pattern matches any file name that ends in
'.c'.  's.%.c' as a pattern matches any file name that starts with 's.',
ends in '.c' and is at least five characters long.  (There must be at
least one character to match the '%'.)  The substring that the '%'
matches is called the "stem".

   '%' in a prerequisite of a pattern rule stands for the same stem that
was matched by the '%' in the target.  In order for the pattern rule to
apply, its target pattern must match the file name under consideration
and all of its prerequisites (after pattern substitution) must name
files that exist or can be made.  These files become prerequisites of
the target.

   Thus, a rule of the form

     %.o : %.c ; RECIPE...

specifies how to make a file 'N.o', with another file 'N.c' as its
prerequisite, provided that 'N.c' exists or can be made.

   There may also be prerequisites that do not use '%'; such a
prerequisite attaches to every file made by this pattern rule.  These
unvarying prerequisites are useful occasionally.

   A pattern rule need not have any prerequisites that contain '%', or
in fact any prerequisites at all.  Such a rule is effectively a general
wildcard.  It provides a way to make any file that matches the target
pattern.  *Note Last Resort::.

   More than one pattern rule may match a target.  In this case 'make'
will choose the "best fit" rule.  *Note How Patterns Match: Pattern
Match.

   Pattern rules may have more than one target.  Unlike normal rules,
this does not act as many different rules with the same prerequisites
and recipe.  If a pattern rule has multiple targets, 'make' knows that
the rule's recipe is responsible for making all of the targets.  The
recipe is executed only once to make all the targets.  When searching
for a pattern rule to match a target, the target patterns of a rule
other than the one that matches the target in need of a rule are
incidental: 'make' worries only about giving a recipe and prerequisites
to the file presently in question.  However, when this file's recipe is
run, the other targets are marked as having been updated themselves.


File: make.info,  Node: Pattern Examples,  Next: Automatic Variables,  Prev: Pattern Intro,  Up: Pattern Rules

10.5.2 Pattern Rule Examples
----------------------------

Here are some examples of pattern rules actually predefined in 'make'.
First, the rule that compiles '.c' files into '.o' files:

     %.o : %.c
             $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@

defines a rule that can make any file 'X.o' from 'X.c'.  The recipe uses
the automatic variables '$@' and '$<' to substitute the names of the
target file and the source file in each case where the rule applies
(*note Automatic Variables::).

   Here is a second built-in rule:

     % :: RCS/%,v
             $(CO) $(COFLAGS) $<

defines a rule that can make any file 'X' whatsoever from a
corresponding file 'X,v' in the sub-directory 'RCS'.  Since the target
is '%', this rule will apply to any file whatever, provided the
appropriate prerequisite file exists.  The double colon makes the rule
"terminal", which means that its prerequisite may not be an intermediate
file (*note Match-Anything Pattern Rules: Match-Anything Rules.).

   This pattern rule has two targets:

     %.tab.c %.tab.h: %.y
             bison -d $<

This tells 'make' that the recipe 'bison -d X.y' will make both
'X.tab.c' and 'X.tab.h'.  If the file 'foo' depends on the files
'parse.tab.o' and 'scan.o' and the file 'scan.o' depends on the file
'parse.tab.h', when 'parse.y' is changed, the recipe 'bison -d parse.y'
will be executed only once, and the prerequisites of both 'parse.tab.o'
and 'scan.o' will be satisfied.  (Presumably the file 'parse.tab.o' will
be recompiled from 'parse.tab.c' and the file 'scan.o' from 'scan.c',
while 'foo' is linked from 'parse.tab.o', 'scan.o', and its other
prerequisites, and it will execute happily ever after.)


File: make.info,  Node: Automatic Variables,  Next: Pattern Match,  Prev: Pattern Examples,  Up: Pattern Rules

10.5.3 Automatic Variables
--------------------------

Suppose you are writing a pattern rule to compile a '.c' file into a
'.o' file: how do you write the 'cc' command so that it operates on the
right source file name?  You cannot write the name in the recipe,
because the name is different each time the implicit rule is applied.

   What you do is use a special feature of 'make', the "automatic
variables".  These variables have values computed afresh for each rule
that is executed, based on the target and prerequisites of the rule.  In
this example, you would use '$@' for the object file name and '$<' for
the source file name.

   It's very important that you recognize the limited scope in which
automatic variable values are available: they only have values within
the recipe.  In particular, you cannot use them anywhere within the
target list of a rule; they have no value there and will expand to the
empty string.  Also, they cannot be accessed directly within the
prerequisite list of a rule.  A common mistake is attempting to use '$@'
within the prerequisites list; this will not work.  However, there is a
special feature of GNU 'make', secondary expansion (*note Secondary
Expansion::), which will allow automatic variable values to be used in
prerequisite lists.

   Here is a table of automatic variables:

'$@'
     The file name of the target of the rule.  If the target is an
     archive member, then '$@' is the name of the archive file.  In a
     pattern rule that has multiple targets (*note Introduction to
     Pattern Rules: Pattern Intro.), '$@' is the name of whichever
     target caused the rule's recipe to be run.

'$%'
     The target member name, when the target is an archive member.
     *Note Archives::.  For example, if the target is 'foo.a(bar.o)'
     then '$%' is 'bar.o' and '$@' is 'foo.a'.  '$%' is empty when the
     target is not an archive member.

'$<'
     The name of the first prerequisite.  If the target got its recipe
     from an implicit rule, this will be the first prerequisite added by
     the implicit rule (*note Implicit Rules::).

'$?'
     The names of all the prerequisites that are newer than the target,
     with spaces between them.  For prerequisites which are archive
     members, only the named member is used (*note Archives::).

'$^'
     The names of all the prerequisites, with spaces between them.  For
     prerequisites which are archive members, only the named member is
     used (*note Archives::).  A target has only one prerequisite on
     each other file it depends on, no matter how many times each file
     is listed as a prerequisite.  So if you list a prerequisite more
     than once for a target, the value of '$^' contains just one copy of
     the name.  This list does *not* contain any of the order-only
     prerequisites; for those see the '$|' variable, below.

'$+'
     This is like '$^', but prerequisites listed more than once are
     duplicated in the order they were listed in the makefile.  This is
     primarily useful for use in linking commands where it is meaningful
     to repeat library file names in a particular order.

'$|'
     The names of all the order-only prerequisites, with spaces between
     them.

'$*'
     The stem with which an implicit rule matches (*note How Patterns
     Match: Pattern Match.).  If the target is 'dir/a.foo.b' and the
     target pattern is 'a.%.b' then the stem is 'dir/foo'.  The stem is
     useful for constructing names of related files.

     In a static pattern rule, the stem is part of the file name that
     matched the '%' in the target pattern.

     In an explicit rule, there is no stem; so '$*' cannot be determined
     in that way.  Instead, if the target name ends with a recognized
     suffix (*note Old-Fashioned Suffix Rules: Suffix Rules.), '$*' is
     set to the target name minus the suffix.  For example, if the
     target name is 'foo.c', then '$*' is set to 'foo', since '.c' is a
     suffix.  GNU 'make' does this bizarre thing only for compatibility
     with other implementations of 'make'.  You should generally avoid
     using '$*' except in implicit rules or static pattern rules.

     If the target name in an explicit rule does not end with a
     recognized suffix, '$*' is set to the empty string for that rule.

   '$?' is useful even in explicit rules when you wish to operate on
only the prerequisites that have changed.  For example, suppose that an
archive named 'lib' is supposed to contain copies of several object
files.  This rule copies just the changed object files into the archive:

     lib: foo.o bar.o lose.o win.o
             ar r lib $?

   Of the variables listed above, four have values that are single file
names, and three have values that are lists of file names.  These seven
have variants that get just the file's directory name or just the file
name within the directory.  The variant variables' names are formed by
appending 'D' or 'F', respectively.  These variants are semi-obsolete in
GNU 'make' since the functions 'dir' and 'notdir' can be used to get a
similar effect (*note Functions for File Names: File Name Functions.).
Note, however, that the 'D' variants all omit the trailing slash which
always appears in the output of the 'dir' function.  Here is a table of
the variants:

'$(@D)'
     The directory part of the file name of the target, with the
     trailing slash removed.  If the value of '$@' is 'dir/foo.o' then
     '$(@D)' is 'dir'.  This value is '.' if '$@' does not contain a
     slash.

'$(@F)'
     The file-within-directory part of the file name of the target.  If
     the value of '$@' is 'dir/foo.o' then '$(@F)' is 'foo.o'.  '$(@F)'
     is equivalent to '$(notdir $@)'.

'$(*D)'
'$(*F)'
     The directory part and the file-within-directory part of the stem;
     'dir' and 'foo' in this example.

'$(%D)'
'$(%F)'
     The directory part and the file-within-directory part of the target
     archive member name.  This makes sense only for archive member
     targets of the form 'ARCHIVE(MEMBER)' and is useful only when
     MEMBER may contain a directory name.  (*Note Archive Members as
     Targets: Archive Members.)

'$(<D)'
'$(<F)'
     The directory part and the file-within-directory part of the first
     prerequisite.

'$(^D)'
'$(^F)'
     Lists of the directory parts and the file-within-directory parts of
     all prerequisites.

'$(+D)'
'$(+F)'
     Lists of the directory parts and the file-within-directory parts of
     all prerequisites, including multiple instances of duplicated
     prerequisites.

'$(?D)'
'$(?F)'
     Lists of the directory parts and the file-within-directory parts of
     all prerequisites that are newer than the target.

   Note that we use a special stylistic convention when we talk about
these automatic variables; we write "the value of '$<'", rather than "the variable '<'"
as we would write for ordinary variables such as 'objects' and 'CFLAGS'.
We think this convention looks more natural in this special case.
Please do not assume it has a deep significance; '$<' refers to the
variable named '<' just as '$(CFLAGS)' refers to the variable named
'CFLAGS'.  You could just as well use '$(<)' in place of '$<'.


File: make.info,  Node: Pattern Match,  Next: Match-Anything Rules,  Prev: Automatic Variables,  Up: Pattern Rules

10.5.4 How Patterns Match
-------------------------

A target pattern is composed of a '%' between a prefix and a suffix,
either or both of which may be empty.  The pattern matches a file name
only if the file name starts with the prefix and ends with the suffix,
without overlap.  The text between the prefix and the suffix is called
the "stem".  Thus, when the pattern '%.o' matches the file name
'test.o', the stem is 'test'.  The pattern rule prerequisites are turned
into actual file names by substituting the stem for the character '%'.
Thus, if in the same example one of the prerequisites is written as
'%.c', it expands to 'test.c'.

   When the target pattern does not contain a slash (and it usually does
not), directory names in the file names are removed from the file name
before it is compared with the target prefix and suffix.  After the
comparison of the file name to the target pattern, the directory names,
along with the slash that ends them, are added on to the prerequisite
file names generated from the pattern rule's prerequisite patterns and
the file name.  The directories are ignored only for the purpose of
finding an implicit rule to use, not in the application of that rule.
Thus, 'e%t' matches the file name 'src/eat', with 'src/a' as the stem.
When prerequisites are turned into file names, the directories from the
stem are added at the front, while the rest of the stem is substituted
for the '%'.  The stem 'src/a' with a prerequisite pattern 'c%r' gives
the file name 'src/car'.

   A pattern rule can be used to build a given file only if there is a
target pattern that matches the file name, _and_ all prerequisites in
that rule either exist or can be built.  The rules you write take
precedence over those that are built in.  Note however, that a rule
whose prerequisites actually exist or are mentioned always takes
priority over a rule with prerequisites that must be made by chaining
other implicit rules.

   It is possible that more than one pattern rule will meet these
criteria.  In that case, 'make' will choose the rule with the shortest
stem (that is, the pattern that matches most specifically).  If more
than one pattern rule has the shortest stem, 'make' will choose the
first one found in the makefile.

   This algorithm results in more specific rules being preferred over
more generic ones; for example:

     %.o: %.c
             $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@

     %.o : %.f
             $(COMPILE.F) $(OUTPUT_OPTION) $<

     lib/%.o: lib/%.c
             $(CC) -fPIC -c $(CFLAGS) $(CPPFLAGS) $< -o $@

   Given these rules and asked to build 'bar.o' where both 'bar.c' and
'bar.f' exist, 'make' will choose the first rule and compile 'bar.c'
into 'bar.o'.  In the same situation where 'bar.c' does not exist, then
'make' will choose the second rule and compile 'bar.f' into 'bar.o'.

   If 'make' is asked to build 'lib/bar.o' and both 'lib/bar.c' and
'lib/bar.f' exist, then the third rule will be chosen since the stem for
this rule ('bar') is shorter than the stem for the first rule
('lib/bar').  If 'lib/bar.c' does not exist then the third rule is not
eligible and the second rule will be used, even though the stem is
longer.


File: make.info,  Node: Match-Anything Rules,  Next: Canceling Rules,  Prev: Pattern Match,  Up: Pattern Rules

10.5.5 Match-Anything Pattern Rules
-----------------------------------

When a pattern rule's target is just '%', it matches any file name
whatever.  We call these rules "match-anything" rules.  They are very
useful, but it can take a lot of time for 'make' to think about them,
because it must consider every such rule for each file name listed
either as a target or as a prerequisite.

   Suppose the makefile mentions 'foo.c'.  For this target, 'make' would
have to consider making it by linking an object file 'foo.c.o', or by C
compilation-and-linking in one step from 'foo.c.c', or by Pascal
compilation-and-linking from 'foo.c.p', and many other possibilities.

   We know these possibilities are ridiculous since 'foo.c' is a C
source file, not an executable.  If 'make' did consider these
possibilities, it would ultimately reject them, because files such as
'foo.c.o' and 'foo.c.p' would not exist.  But these possibilities are so
numerous that 'make' would run very slowly if it had to consider them.

   To gain speed, we have put various constraints on the way 'make'
considers match-anything rules.  There are two different constraints
that can be applied, and each time you define a match-anything rule you
must choose one or the other for that rule.

   One choice is to mark the match-anything rule as "terminal" by
defining it with a double colon.  When a rule is terminal, it does not
apply unless its prerequisites actually exist.  Prerequisites that could
be made with other implicit rules are not good enough.  In other words,
no further chaining is allowed beyond a terminal rule.

   For example, the built-in implicit rules for extracting sources from
RCS and SCCS files are terminal; as a result, if the file 'foo.c,v' does
not exist, 'make' will not even consider trying to make it as an
intermediate file from 'foo.c,v.o' or from 'RCS/SCCS/s.foo.c,v'.  RCS
and SCCS files are generally ultimate source files, which should not be
remade from any other files; therefore, 'make' can save time by not
looking for ways to remake them.

   If you do not mark the match-anything rule as terminal, then it is
non-terminal.  A non-terminal match-anything rule cannot apply to a file
name that indicates a specific type of data.  A file name indicates a
specific type of data if some non-match-anything implicit rule target
matches it.

   For example, the file name 'foo.c' matches the target for the pattern
rule '%.c : %.y' (the rule to run Yacc).  Regardless of whether this
rule is actually applicable (which happens only if there is a file
'foo.y'), the fact that its target matches is enough to prevent
consideration of any non-terminal match-anything rules for the file
'foo.c'.  Thus, 'make' will not even consider trying to make 'foo.c' as
an executable file from 'foo.c.o', 'foo.c.c', 'foo.c.p', etc.

   The motivation for this constraint is that non-terminal
match-anything rules are used for making files containing specific types
of data (such as executable files) and a file name with a recognized
suffix indicates some other specific type of data (such as a C source
file).

   Special built-in dummy pattern rules are provided solely to recognize
certain file names so that non-terminal match-anything rules will not be
considered.  These dummy rules have no prerequisites and no recipes, and
they are ignored for all other purposes.  For example, the built-in
implicit rule

     %.p :

exists to make sure that Pascal source files such as 'foo.p' match a
specific target pattern and thereby prevent time from being wasted
looking for 'foo.p.o' or 'foo.p.c'.

   Dummy pattern rules such as the one for '%.p' are made for every
suffix listed as valid for use in suffix rules (*note Old-Fashioned
Suffix Rules: Suffix Rules.).


File: make.info,  Node: Canceling Rules,  Prev: Match-Anything Rules,  Up: Pattern Rules

10.5.6 Canceling Implicit Rules
-------------------------------

You can override a built-in implicit rule (or one you have defined
yourself) by defining a new pattern rule with the same target and
prerequisites, but a different recipe.  When the new rule is defined,
the built-in one is replaced.  The new rule's position in the sequence
of implicit rules is determined by where you write the new rule.

   You can cancel a built-in implicit rule by defining a pattern rule
with the same target and prerequisites, but no recipe.  For example, the
following would cancel the rule that runs the assembler:

     %.o : %.s


File: make.info,  Node: Last Resort,  Next: Suffix Rules,  Prev: Pattern Rules,  Up: Implicit Rules

10.6 Defining Last-Resort Default Rules
=======================================

You can define a last-resort implicit rule by writing a terminal
match-anything pattern rule with no prerequisites (*note Match-Anything
Rules::).  This is just like any other pattern rule; the only thing
special about it is that it will match any target.  So such a rule's
recipe is used for all targets and prerequisites that have no recipe of
their own and for which no other implicit rule applies.

   For example, when testing a makefile, you might not care if the
source files contain real data, only that they exist.  Then you might do
this:

     %::
             touch $@

to cause all the source files needed (as prerequisites) to be created
automatically.

   You can instead define a recipe to be used for targets for which
there are no rules at all, even ones which don't specify recipes.  You
do this by writing a rule for the target '.DEFAULT'.  Such a rule's
recipe is used for all prerequisites which do not appear as targets in
any explicit rule, and for which no implicit rule applies.  Naturally,
there is no '.DEFAULT' rule unless you write one.

   If you use '.DEFAULT' with no recipe or prerequisites:

     .DEFAULT:

the recipe previously stored for '.DEFAULT' is cleared.  Then 'make'
acts as if you had never defined '.DEFAULT' at all.

   If you do not want a target to get the recipe from a match-anything
pattern rule or '.DEFAULT', but you also do not want any recipe to be
run for the target, you can give it an empty recipe (*note Defining
Empty Recipes: Empty Recipes.).

   You can use a last-resort rule to override part of another makefile.
*Note Overriding Part of Another Makefile: Overriding Makefiles.


File: make.info,  Node: Suffix Rules,  Next: Implicit Rule Search,  Prev: Last Resort,  Up: Implicit Rules

10.7 Old-Fashioned Suffix Rules
===============================

"Suffix rules" are the old-fashioned way of defining implicit rules for
'make'.  Suffix rules are obsolete because pattern rules are more
general and clearer.  They are supported in GNU 'make' for compatibility
with old makefiles.  They come in two kinds: "double-suffix" and
"single-suffix".

   A double-suffix rule is defined by a pair of suffixes: the target
suffix and the source suffix.  It matches any file whose name ends with
the target suffix.  The corresponding implicit prerequisite is made by
replacing the target suffix with the source suffix in the file name.  A
two-suffix rule whose target and source suffixes are '.o' and '.c' is
equivalent to the pattern rule '%.o : %.c'.

   A single-suffix rule is defined by a single suffix, which is the
source suffix.  It matches any file name, and the corresponding implicit
prerequisite name is made by appending the source suffix.  A
single-suffix rule whose source suffix is '.c' is equivalent to the
pattern rule '% : %.c'.

   Suffix rule definitions are recognized by comparing each rule's
target against a defined list of known suffixes.  When 'make' sees a
rule whose target is a known suffix, this rule is considered a
single-suffix rule.  When 'make' sees a rule whose target is two known
suffixes concatenated, this rule is taken as a double-suffix rule.

   For example, '.c' and '.o' are both on the default list of known
suffixes.  Therefore, if you define a rule whose target is '.c.o',
'make' takes it to be a double-suffix rule with source suffix '.c' and
target suffix '.o'.  Here is the old-fashioned way to define the rule
for compiling a C source file:

     .c.o:
             $(CC) -c $(CFLAGS) $(CPPFLAGS) -o $@ $<

   Suffix rules cannot have any prerequisites of their own.  If they
have any, they are treated as normal files with funny names, not as
suffix rules.  Thus, the rule:

     .c.o: foo.h
             $(CC) -c $(CFLAGS) $(CPPFLAGS) -o $@ $<

tells how to make the file '.c.o' from the prerequisite file 'foo.h',
and is not at all like the pattern rule:

     %.o: %.c foo.h
             $(CC) -c $(CFLAGS) $(CPPFLAGS) -o $@ $<

which tells how to make '.o' files from '.c' files, and makes all '.o'
files using this pattern rule also depend on 'foo.h'.

   Suffix rules with no recipe are also meaningless.  They do not remove
previous rules as do pattern rules with no recipe (*note Canceling
Implicit Rules: Canceling Rules.).  They simply enter the suffix or pair
of suffixes concatenated as a target in the data base.

   The known suffixes are simply the names of the prerequisites of the
special target '.SUFFIXES'.  You can add your own suffixes by writing a
rule for '.SUFFIXES' that adds more prerequisites, as in:

     .SUFFIXES: .hack .win

which adds '.hack' and '.win' to the end of the list of suffixes.

   If you wish to eliminate the default known suffixes instead of just
adding to them, write a rule for '.SUFFIXES' with no prerequisites.  By
special dispensation, this eliminates all existing prerequisites of
'.SUFFIXES'.  You can then write another rule to add the suffixes you
want.  For example,

     .SUFFIXES:            # Delete the default suffixes
     .SUFFIXES: .c .o .h   # Define our suffix list

   The '-r' or '--no-builtin-rules' flag causes the default list of
suffixes to be empty.

   The variable 'SUFFIXES' is defined to the default list of suffixes
before 'make' reads any makefiles.  You can change the list of suffixes
with a rule for the special target '.SUFFIXES', but that does not alter
this variable.


File: make.info,  Node: Implicit Rule Search,  Prev: Suffix Rules,  Up: Implicit Rules

10.8 Implicit Rule Search Algorithm
===================================

Here is the procedure 'make' uses for searching for an implicit rule for
a target T.  This procedure is followed for each double-colon rule with
no recipe, for each target of ordinary rules none of which have a
recipe, and for each prerequisite that is not the target of any rule.
It is also followed recursively for prerequisites that come from
implicit rules, in the search for a chain of rules.

   Suffix rules are not mentioned in this algorithm because suffix rules
are converted to equivalent pattern rules once the makefiles have been
read in.

   For an archive member target of the form 'ARCHIVE(MEMBER)', the
following algorithm is run twice, first using the entire target name T,
and second using '(MEMBER)' as the target T if the first run found no
rule.

  1. Split T into a directory part, called D, and the rest, called N.
     For example, if T is 'src/foo.o', then D is 'src/' and N is
     'foo.o'.

  2. Make a list of all the pattern rules one of whose targets matches T
     or N.  If the target pattern contains a slash, it is matched
     against T; otherwise, against N.

  3. If any rule in that list is _not_ a match-anything rule, then
     remove all non-terminal match-anything rules from the list.

  4. Remove from the list all rules with no recipe.

  5. For each pattern rule in the list:

       a. Find the stem S, which is the nonempty part of T or N matched
          by the '%' in the target pattern.

       b. Compute the prerequisite names by substituting S for '%'; if
          the target pattern does not contain a slash, append D to the
          front of each prerequisite name.

       c. Test whether all the prerequisites exist or ought to exist.
          (If a file name is mentioned in the makefile as a target or as
          an explicit prerequisite, then we say it ought to exist.)

          If all prerequisites exist or ought to exist, or there are no
          prerequisites, then this rule applies.

  6. If no pattern rule has been found so far, try harder.  For each
     pattern rule in the list:

       a. If the rule is terminal, ignore it and go on to the next rule.

       b. Compute the prerequisite names as before.

       c. Test whether all the prerequisites exist or ought to exist.

       d. For each prerequisite that does not exist, follow this
          algorithm recursively to see if the prerequisite can be made
          by an implicit rule.

       e. If all prerequisites exist, ought to exist, or can be made by
          implicit rules, then this rule applies.

  7. If no implicit rule applies, the rule for '.DEFAULT', if any,
     applies.  In that case, give T the same recipe that '.DEFAULT' has.
     Otherwise, there is no recipe for T.

   Once a rule that applies has been found, for each target pattern of
the rule other than the one that matched T or N, the '%' in the pattern
is replaced with S and the resultant file name is stored until the
recipe to remake the target file T is executed.  After the recipe is
executed, each of these stored file names are entered into the data base
and marked as having been updated and having the same update status as
the file T.

   When the recipe of a pattern rule is executed for T, the automatic
variables are set corresponding to the target and prerequisites.  *Note
Automatic Variables::.


File: make.info,  Node: Archives,  Next: Extending make,  Prev: Implicit Rules,  Up: Top

11 Using 'make' to Update Archive Files
***************************************

"Archive files" are files containing named sub-files called "members";
they are maintained with the program 'ar' and their main use is as
subroutine libraries for linking.

* Menu:

* Archive Members::             Archive members as targets.
* Archive Update::              The implicit rule for archive member targets.
* Archive Pitfalls::            Dangers to watch out for when using archives.
* Archive Suffix Rules::        You can write a special kind of suffix rule
                                  for updating archives.


File: make.info,  Node: Archive Members,  Next: Archive Update,  Prev: Archives,  Up: Archives

11.1 Archive Members as Targets
===============================

An individual member of an archive file can be used as a target or
prerequisite in 'make'.  You specify the member named MEMBER in archive
file ARCHIVE as follows:

     ARCHIVE(MEMBER)

This construct is available only in targets and prerequisites, not in
recipes!  Most programs that you might use in recipes do not support
this syntax and cannot act directly on archive members.  Only 'ar' and
other programs specifically designed to operate on archives can do so.
Therefore, valid recipes to update an archive member target probably
must use 'ar'.  For example, this rule says to create a member 'hack.o'
in archive 'foolib' by copying the file 'hack.o':

     foolib(hack.o) : hack.o
             ar cr foolib hack.o

   In fact, nearly all archive member targets are updated in just this
way and there is an implicit rule to do it for you.  *Please note:* The
'c' flag to 'ar' is required if the archive file does not already exist.

   To specify several members in the same archive, you can write all the
member names together between the parentheses.  For example:

     foolib(hack.o kludge.o)

is equivalent to:

     foolib(hack.o) foolib(kludge.o)

   You can also use shell-style wildcards in an archive member
reference.  *Note Using Wildcard Characters in File Names: Wildcards.
For example, 'foolib(*.o)' expands to all existing members of the
'foolib' archive whose names end in '.o'; perhaps 'foolib(hack.o)
foolib(kludge.o)'.


File: make.info,  Node: Archive Update,  Next: Archive Pitfalls,  Prev: Archive Members,  Up: Archives

11.2 Implicit Rule for Archive Member Targets
=============================================

Recall that a target that looks like 'A(M)' stands for the member named
M in the archive file A.

   When 'make' looks for an implicit rule for such a target, as a
special feature it considers implicit rules that match '(M)', as well as
those that match the actual target 'A(M)'.

   This causes one special rule whose target is '(%)' to match.  This
rule updates the target 'A(M)' by copying the file M into the archive.
For example, it will update the archive member target 'foo.a(bar.o)' by
copying the _file_ 'bar.o' into the archive 'foo.a' as a _member_ named
'bar.o'.

   When this rule is chained with others, the result is very powerful.
Thus, 'make "foo.a(bar.o)"' (the quotes are needed to protect the '('
and ')' from being interpreted specially by the shell) in the presence
of a file 'bar.c' is enough to cause the following recipe to be run,
even without a makefile:

     cc -c bar.c -o bar.o
     ar r foo.a bar.o
     rm -f bar.o

Here 'make' has envisioned the file 'bar.o' as an intermediate file.
*Note Chains of Implicit Rules: Chained Rules.

   Implicit rules such as this one are written using the automatic
variable '$%'.  *Note Automatic Variables::.

   An archive member name in an archive cannot contain a directory name,
but it may be useful in a makefile to pretend that it does.  If you
write an archive member target 'foo.a(dir/file.o)', 'make' will perform
automatic updating with this recipe:

     ar r foo.a dir/file.o

which has the effect of copying the file 'dir/file.o' into a member
named 'file.o'.  In connection with such usage, the automatic variables
'%D' and '%F' may be useful.

* Menu:

* Archive Symbols::             How to update archive symbol directories.


File: make.info,  Node: Archive Symbols,  Prev: Archive Update,  Up: Archive Update

11.2.1 Updating Archive Symbol Directories
------------------------------------------

An archive file that is used as a library usually contains a special
member named '__.SYMDEF' that contains a directory of the external
symbol names defined by all the other members.  After you update any
other members, you need to update '__.SYMDEF' so that it will summarize
the other members properly.  This is done by running the 'ranlib'
program:

     ranlib ARCHIVEFILE

   Normally you would put this command in the rule for the archive file,
and make all the members of the archive file prerequisites of that rule.
For example,

     libfoo.a: libfoo.a(x.o) libfoo.a(y.o) ...
             ranlib libfoo.a

The effect of this is to update archive members 'x.o', 'y.o', etc., and
then update the symbol directory member '__.SYMDEF' by running 'ranlib'.
The rules for updating the members are not shown here; most likely you
can omit them and use the implicit rule which copies files into the
archive, as described in the preceding section.

   This is not necessary when using the GNU 'ar' program, which updates
the '__.SYMDEF' member automatically.


File: make.info,  Node: Archive Pitfalls,  Next: Archive Suffix Rules,  Prev: Archive Update,  Up: Archives

11.3 Dangers When Using Archives
================================

It is important to be careful when using parallel execution (the '-j'
switch; *note Parallel Execution: Parallel.) and archives.  If multiple
'ar' commands run at the same time on the same archive file, they will
not know about each other and can corrupt the file.

   Possibly a future version of 'make' will provide a mechanism to
circumvent this problem by serializing all recipes that operate on the
same archive file.  But for the time being, you must either write your
makefiles to avoid this problem in some other way, or not use '-j'.


File: make.info,  Node: Archive Suffix Rules,  Prev: Archive Pitfalls,  Up: Archives

11.4 Suffix Rules for Archive Files
===================================

You can write a special kind of suffix rule for dealing with archive
files.  *Note Suffix Rules::, for a full explanation of suffix rules.
Archive suffix rules are obsolete in GNU 'make', because pattern rules
for archives are a more general mechanism (*note Archive Update::).  But
they are retained for compatibility with other 'make's.

   To write a suffix rule for archives, you simply write a suffix rule
using the target suffix '.a' (the usual suffix for archive files).  For
example, here is the old-fashioned suffix rule to update a library
archive from C source files:

     .c.a:
             $(CC) $(CFLAGS) $(CPPFLAGS) -c $< -o $*.o
             $(AR) r $@ $*.o
             $(RM) $*.o

This works just as if you had written the pattern rule:

     (%.o): %.c
             $(CC) $(CFLAGS) $(CPPFLAGS) -c $< -o $*.o
             $(AR) r $@ $*.o
             $(RM) $*.o

   In fact, this is just what 'make' does when it sees a suffix rule
with '.a' as the target suffix.  Any double-suffix rule '.X.a' is
converted to a pattern rule with the target pattern '(%.o)' and a
prerequisite pattern of '%.X'.

   Since you might want to use '.a' as the suffix for some other kind of
file, 'make' also converts archive suffix rules to pattern rules in the
normal way (*note Suffix Rules::).  Thus a double-suffix rule '.X.a'
produces two pattern rules: '(%.o): %.X' and '%.a: %.X'.


File: make.info,  Node: Extending make,  Next: Features,  Prev: Archives,  Up: Top

12 Extending GNU 'make'
***********************

GNU 'make' provides many advanced capabilities, including many useful
functions.  However, it does not contain a complete programming language
and so it has limitations.  Sometimes these limitations can be overcome
through use of the 'shell' function to invoke a separate program,
although this can be inefficient.

   In cases where the built-in capabilities of GNU 'make' are
insufficient to your requirements there are two options for extending
'make'.  On systems where it's provided, you can utilize GNU Guile as an
embedded scripting language (*note GNU Guile Integration: Guile
Integration.).  On systems which support dynamically loadable objects,
you can write your own extension in any language (which can be compiled
into such an object) and load it to provide extended capabilities (*note
The 'load' Directive: load Directive.).

* Menu:

* Guile Integration::           Using Guile as an embedded scripting language.
* Loading Objects::             Loading dynamic objects as extensions.


File: make.info,  Node: Guile Integration,  Next: Loading Objects,  Prev: Extending make,  Up: Extending make

12.1 GNU Guile Integration
==========================

GNU 'make' may be built with support for GNU Guile as an embedded
extension language.  Guile implements the Scheme language.  A review of
GNU Guile and the Scheme language and its features is beyond the scope
of this manual: see the documentation for GNU Guile and Scheme.

   You can determine if 'make' contains support for Guile by examining
the '.FEATURES' variable; it will contain the word GUILE if Guile
support is available.

   The Guile integration provides one new 'make' function: 'guile'.  The
'guile' function takes one argument which is first expanded by 'make' in
the normal fashion, then passed to the GNU Guile evaluator.  The result
of the evaluator is converted into a string and used as the expansion of
the 'guile' function in the makefile.

   In addition, GNU 'make' exposes Guile procedures for use in Guile
scripts.

* Menu:

* Guile Types::                 Converting Guile types to 'make' strings.
* Guile Interface::             Invoking 'make' functions from Guile.
* Guile Example::               Example using Guile in 'make'.


File: make.info,  Node: Guile Types,  Next: Guile Interface,  Prev: Guile Integration,  Up: Guile Integration

12.1.1 Conversion of Guile Types
--------------------------------

There is only one "data type" in 'make': a string.  GNU Guile, on the
other hand, provides a rich variety of different data types.  An
important aspect of the interface between 'make' and GNU Guile is the
conversion of Guile data types into 'make' strings.

   This conversion is relevant in two places: when a makefile invokes
the 'guile' function to evaluate a Guile expression, the result of that
evaluation must be converted into a make string so it can be further
evaluated by 'make'.  And secondly, when a Guile script invokes one of
the procedures exported by 'make' the argument provided to the procedure
must be converted into a string.

   The conversion of Guile types into 'make' strings is as below:

'#f'
     False is converted into the empty string: in 'make' conditionals
     the empty string is considered false.

'#t'
     True is converted to the string '#t': in 'make' conditionals any
     non-empty string is considered true.

'symbol'
'number'
     A symbol or number is converted into the string representation of
     that symbol or number.

'character'
     A printable character is converted to the same character.

'string'
     A string containing only printable characters is converted to the
     same string.

'list'
     A list is converted recursively according to the above rules.  This
     implies that any structured list will be flattened (that is, a
     result of ''(a b (c d) e)' will be converted to the 'make' string
     'a b c d e').

'other'
     Any other Guile type results in an error.  In future versions of
     'make', other Guile types may be converted.

   The translation of '#f' (to the empty string) and '#t' (to the
non-empty string '#t') is designed to allow you to use Guile boolean
results directly as 'make' boolean conditions.  For example:

     $(if $(guile (access? "myfile" R_OK)),$(info myfile exists))

   As a consequence of these conversion rules you must consider the
result of your Guile script, as that result will be converted into a
string and parsed by 'make'.  If there is no natural result for the
script (that is, the script exists solely for its side-effects), you
should add '#f' as the final expression in order to avoid syntax errors
in your makefile.


File: make.info,  Node: Guile Interface,  Next: Guile Example,  Prev: Guile Types,  Up: Guile Integration

12.1.2 Interfaces from Guile to 'make'
--------------------------------------

In addition to the 'guile' function available in makefiles, 'make'
exposes some procedures for use in your Guile scripts.  At startup
'make' creates a new Guile module, 'gnu make', and exports these
procedures as public interfaces from that module:

'gmk-expand'
     This procedure takes a single argument which is converted into a
     string.  The string is expanded by 'make' using normal 'make'
     expansion rules.  The result of the expansion is converted into a
     Guile string and provided as the result of the procedure.

'gmk-eval'
     This procedure takes a single argument which is converted into a
     string.  The string is evaluated by 'make' as if it were a
     makefile.  This is the same capability available via the 'eval'
     function (*note Eval Function::).  The result of the 'gmk-eval'
     procedure is always the empty string.

     Note that 'gmk-eval' is not quite the same as using 'gmk-expand'
     with the 'eval' function: in the latter case the evaluated string
     will be expanded _twice_; first by 'gmk-expand', then again by the
     'eval' function.


File: make.info,  Node: Guile Example,  Prev: Guile Interface,  Up: Guile Integration

12.1.3 Example Using Guile in 'make'
------------------------------------

Here is a very simple example using GNU Guile to manage writing to a
file.  These Guile procedures simply open a file, allow writing to the
file (one string per line), and close the file.  Note that because we
cannot store complex values such as Guile ports in 'make' variables,
we'll keep the port as a global variable in the Guile interpreter.

   You can create Guile functions easily using 'define'/'endef' to
create a Guile script, then use the 'guile' function to internalize it:

     define GUILEIO
     ;; A simple Guile IO library for GNU make

     (define MKPORT #f)

     (define (mkopen name mode)
       (set! MKPORT (open-file name mode))
       #f)

     (define (mkwrite s)
       (display s MKPORT)
       (newline MKPORT)
       #f)

     (define (mkclose)
       (close-port MKPORT)
       #f)

     #f
     endef

     # Internalize the Guile IO functions
     $(guile $(GUILEIO))

   If you have a significant amount of Guile support code, you might
consider keeping it in a different file (e.g., 'guileio.scm') and then
loading it in your makefile using the 'guile' function:

     $(guile (load "guileio.scm"))

   An advantage to this method is that when editing 'guileio.scm', your
editor will understand that this file contains Scheme syntax rather than
makefile syntax.

   Now you can use these Guile functions to create files.  Suppose you
need to operate on a very large list, which cannot fit on the command
line, but the utility you're using accepts the list as input as well:

     prog: $(PREREQS)
             @$(guile (mkopen "tmp.out" "w")) \
              $(foreach X,$^,$(guile (mkwrite "$(X)"))) \
              $(guile (mkclose))
             $(LINK) < tmp.out

   A more comprehensive suite of file manipulation procedures is
possible of course.  You could, for example, maintain multiple output
files at the same time by choosing a symbol for each one and using it as
the key to a hash table, where the value is a port, then returning the
symbol to be stored in a 'make' variable.


File: make.info,  Node: Loading Objects,  Prev: Guile Integration,  Up: Extending make

12.2 Loading Dynamic Objects
============================

     Warning: The 'load' directive and extension capability is
     considered a "technology preview" in this release of GNU make.  We
     encourage you to experiment with this feature and we appreciate any
     feedback on it.  However we cannot guarantee to maintain
     backward-compatibility in the next release.  Consider using GNU
     Guile instead for extending GNU make (*note The 'guile' Function:
     Guile Function.).

   Many operating systems provide a facility for dynamically loading
compiled objects.  If your system provides this facility, GNU 'make' can
make use of it to load dynamic objects at runtime, providing new
capabilities which may then be invoked by your makefile.

   The 'load' directive is used to load a dynamic object.  Once the
object is loaded, a "setup" function will be invoked to allow the object
to initialize itself and register new facilities with GNU 'make'.  A
dynamic object might include new 'make' functions, for example, and the
"setup" function would register them with GNU 'make''s function handling
system.

* Menu:

* load Directive::              Loading dynamic objects as extensions.
* Remaking Loaded Objects::     How loaded objects get remade.
* Loaded Object API::           Programmatic interface for loaded objects.
* Loaded Object Example::       Example of a loaded object


File: make.info,  Node: load Directive,  Next: Remaking Loaded Objects,  Prev: Loading Objects,  Up: Loading Objects

12.2.1 The 'load' Directive
---------------------------

Objects are loaded into GNU 'make' by placing the 'load' directive into
your makefile.  The syntax of the 'load' directive is as follows:

     load OBJECT-FILE ...

   or:

     load OBJECT-FILE(SYMBOL-NAME) ...

   The file OBJECT-FILE is dynamically loaded by GNU 'make'.  If
OBJECT-FILE does not include a directory path then it is first looked
for in the current directory.  If it is not found there, or a directory
path is included, then system-specific paths will be searched.  If the
load fails for any reason, 'make' will print a message and exit.

   If the load succeeds 'make' will invoke an initializing function.

   If SYMBOL-NAME is provided, it will be used as the name of the
initializing function.

   If no SYMBOL-NAME is provided, the initializing function name is
created by taking the base file name of OBJECT-FILE, up to the first
character which is not a valid symbol name character (alphanumerics and
underscores are valid symbol name characters).  To this prefix will be
appended the suffix '_gmk_setup'.

   More than one object file may be loaded with a single 'load'
directive, and both forms of 'load' arguments may be used in the same
directive.

   The initializing function will be provided the file name and line
number of the invocation of the 'load' operation.  It should return a
value of type 'int', which must be '0' on failure and non-'0' on
success.  If the return value is '-1', then GNU make will _not_ attempt
to rebuild the object file (*note How Loaded Objects Are Remade:
Remaking Loaded Objects.).

   For example:

     load ../mk_funcs.so

   will load the dynamic object '../mk_funcs.so'.  After the object is
loaded, 'make' will invoke the function (assumed to be defined by the
shared object) 'mk_funcs_gmk_setup'.

   On the other hand:

     load ../mk_funcs.so(init_mk_func)

   will load the dynamic object '../mk_funcs.so'.  After the object is
loaded, 'make' will invoke the function 'init_mk_func'.

   Regardless of how many times an object file appears in a 'load'
directive, it will only be loaded (and its setup function will only be
invoked) once.

   After an object has been successfully loaded, its file name is
appended to the '.LOADED' variable.

   If you would prefer that failure to load a dynamic object not be
reported as an error, you can use the '-load' directive instead of
'load'.  GNU 'make' will not fail and no message will be generated if an
object fails to load.  The failed object is not added to the '.LOADED'
variable, which can then be consulted to determine if the load was
successful.


File: make.info,  Node: Remaking Loaded Objects,  Next: Loaded Object API,  Prev: load Directive,  Up: Loading Objects

12.2.2 How Loaded Objects Are Remade
------------------------------------

Loaded objects undergo the same re-make procedure as makefiles (*note
How Makefiles Are Remade: Remaking Makefiles.).  If any loaded object is
recreated, then 'make' will start from scratch and re-read all the
makefiles, and reload the object files again.  It is not necessary for
the loaded object to do anything special to support this.

   It's up to the makefile author to provide the rules needed for
rebuilding the loaded object.


File: make.info,  Node: Loaded Object API,  Next: Loaded Object Example,  Prev: Remaking Loaded Objects,  Up: Loading Objects

12.2.3 Loaded Object Interface
------------------------------

     Warning: For this feature to be useful your extensions will need to
     invoke various functions internal to GNU 'make'.  The programming
     interfaces provided in this release should not be considered
     stable: functions may be added, removed, or change calling
     signatures or implementations in future versions of GNU 'make'.

   To be useful, loaded objects must be able to interact with GNU
'make'.  This interaction includes both interfaces the loaded object
provides to makefiles and also interfaces 'make' provides to the loaded
object to manipulate 'make''s operation.

   The interface between loaded objects and 'make' is defined by the
'gnumake.h' C header file.  All loaded objects written in C should
include this header file.  Any loaded object not written in C will need
to implement the interface defined in this header file.

   Typically, a loaded object will register one or more new GNU 'make'
functions using the 'gmk_add_function' routine from within its setup
function.  The implementations of these 'make' functions may make use of
the 'gmk_expand' and 'gmk_eval' routines to perform their tasks, then
optionally return a string as the result of the function expansion.

Loaded Object Licensing
.......................

Every dynamic extension should define the global symbol
'plugin_is_GPL_compatible' to assert that it has been licensed under a
GPL-compatible license.  If this symbol does not exist, 'make' emits a
fatal error and exits when it tries to load your extension.

   The declared type of the symbol should be 'int'.  It does not need to
be in any allocated section, though.  The code merely asserts that the
symbol exists in the global scope.  Something like this is enough:

     int plugin_is_GPL_compatible;

Data Structures
...............

'gmk_floc'
     This structure represents a filename/location pair.  It is provided
     when defining items, so GNU 'make' can inform the user later where
     the definition occurred if necessary.

Registering Functions
.....................

There is currently one way for makefiles to invoke operations provided
by the loaded object: through the 'make' function call interface.  A
loaded object can register one or more new functions which may then be
invoked from within the makefile in the same way as any other function.

   Use 'gmk_add_function' to create a new 'make' function.  Its
arguments are as follows:

'name'
     The function name.  This is what the makefile should use to invoke
     the function.  The name must be between 1 and 255 characters long
     and it may only contain alphanumeric, period ('.'), dash ('-'), and
     underscore ('_') characters.  It may not begin with a period.

'func_ptr'
     A pointer to a function that 'make' will invoke when it expands the
     function in a makefile.  This function must be defined by the
     loaded object.

'min_args'
     The minimum number of arguments the function will accept.  Must be
     between 0 and 255.  GNU 'make' will check this and fail before
     invoking 'func_ptr' if the function was invoked with too few
     arguments.

'max_args'
     The maximum number of arguments the function will accept.  Must be
     between 0 and 255.  GNU 'make' will check this and fail before
     invoking 'func_ptr' if the function was invoked with too few
     arguments.  If the value is 0, then any number of arguments is
     accepted.  If the value is greater than 0, then it must be greater
     than or equal to 'min_args'.

'flags'
     Flags that specify how this function will operate; the desired
     flags should be OR'd together.  If the 'GMK_FUNC_NOEXPAND' flag is
     given then the function arguments will not be expanded before the
     function is called; otherwise they will be expanded first.

Registered Function Interface
.............................

A function registered with 'make' must match the 'gmk_func_ptr' type.
It will be invoked with three parameters: 'name' (the name of the
function), 'argc' (the number of arguments to the function), and 'argv'
(an array of pointers to arguments to the function).  The last pointer
(that is, 'argv[argc]') will be null ('0').

   The return value of the function is the result of expanding the
function.  If the function expands to nothing the return value may be
null.  Otherwise, it must be a pointer to a string created with
'gmk_alloc'.  Once the function returns, 'make' owns this string and
will free it when appropriate; it cannot be accessed by the loaded
object.

GNU 'make' Facilities
.....................

There are some facilities exported by GNU 'make' for use by loaded
objects.  Typically these would be run from within the setup function
and/or the functions registered via 'gmk_add_function', to retrieve or
modify the data 'make' works with.

'gmk_expand'
     This function takes a string and expands it using 'make' expansion
     rules.  The result of the expansion is returned in a nil-terminated
     string buffer.  The caller is responsible for calling 'gmk_free'
     with a pointer to the returned buffer when done.

'gmk_eval'
     This function takes a buffer and evaluates it as a segment of
     makefile syntax.  This function can be used to define new
     variables, new rules, etc.  It is equivalent to using the 'eval'
     'make' function.

   Note that there is a difference between 'gmk_eval' and calling
'gmk_expand' with a string using the 'eval' function: in the latter case
the string will be expanded _twice_; once by 'gmk_expand' and then again
by the 'eval' function.  Using 'gmk_eval' the buffer is only expanded
once, at most (as it's read by the 'make' parser).

Memory Management
.................

Some systems allow for different memory management schemes.  Thus you
should never pass memory that you've allocated directly to any 'make'
function, nor should you attempt to directly free any memory returned to
you by any 'make' function.  Instead, use the 'gmk_alloc' and 'gmk_free'
functions.

   In particular, the string returned to 'make' by a function registered
using 'gmk_add_function' _must_ be allocated using 'gmk_alloc', and the
string returned from the 'make' 'gmk_expand' function _must_ be freed
(when no longer needed) using 'gmk_free'.

'gmk_alloc'
     Return a pointer to a newly-allocated buffer.  This function will
     always return a valid pointer; if not enough memory is available
     'make' will exit.

'gmk_free'
     Free a buffer returned to you by 'make'.  Once the 'gmk_free'
     function returns the string will no longer be valid.


File: make.info,  Node: Loaded Object Example,  Prev: Loaded Object API,  Up: Loading Objects

12.2.4 Example Loaded Object
----------------------------

Let's suppose we wanted to write a new GNU 'make' function that would
create a temporary file and return its name.  We would like our function
to take a prefix as an argument.  First we can write the function in a
file 'mk_temp.c':

     #include <stdlib.h>
     #include <stdlib.h>
     #include <stdio.h>
     #include <string.h>
     #include <unistd.h>
     #include <errno.h>

     #include <gnumake.h>

     int plugin_is_GPL_compatible;

     char *
     gen_tmpfile(const char *nm, int argc, char **argv)
     {
       int fd;

       /* Compute the size of the filename and allocate space for it.  */
       int len = strlen (argv[0]) + 6 + 1;
       char *buf = gmk_alloc (len);

       strcpy (buf, argv[0]);
       strcat (buf, "XXXXXX");

       fd = mkstemp(buf);
       if (fd >= 0)
         {
           /* Don't leak the file descriptor.  */
           close (fd);
           return buf;
         }

       /* Failure.  */
       fprintf (stderr, "mkstemp(%s) failed: %s\n", buf, strerror (errno));
       gmk_free (buf);
       return NULL;
     }

     int
     mk_temp_gmk_setup ()
     {
       /* Register the function with make name "mk-temp".  */
       gmk_add_function ("mk-temp", gen_tmpfile, 1, 1, 1);
       return 1;
     }

   Next, we will write a makefile that can build this shared object,
load it, and use it:

     all:
             @echo Temporary file: $(mk-temp tmpfile.)

     load mk_temp.so

     mk_temp.so: mk_temp.c
             $(CC) -shared -fPIC -o $ $<

   On MS-Windows, due to peculiarities of how shared objects are
produced, the compiler needs to scan the "import library" produced when
building 'make', typically called 'libgnumake-VERSION.dll.a', where
VERSION is the version of the load object API. So the recipe to produce
a shared object will look on Windows like this (assuming the API version
is 1):

     mk_temp.dll: mk_temp.c
             $(CC) -shared -o $ $< -lgnumake-1

   Now when you run 'make' you'll see something like:

     $ make
     cc -shared -fPIC -o mk_temp.so mk_temp.c
     Temporary filename: tmpfile.A7JEwd


File: make.info,  Node: Features,  Next: Missing,  Prev: Extending make,  Up: Top

13 Features of GNU 'make'
*************************

Here is a summary of the features of GNU 'make', for comparison with and
credit to other versions of 'make'.  We consider the features of 'make'
in 4.2 BSD systems as a baseline.  If you are concerned with writing
portable makefiles, you should not use the features of 'make' listed
here, nor the ones in *note Missing::.

   Many features come from the version of 'make' in System V.

   * The 'VPATH' variable and its special meaning.  *Note Searching
     Directories for Prerequisites: Directory Search.  This feature
     exists in System V 'make', but is undocumented.  It is documented
     in 4.3 BSD 'make' (which says it mimics System V's 'VPATH'
     feature).

   * Included makefiles.  *Note Including Other Makefiles: Include.
     Allowing multiple files to be included with a single directive is a
     GNU extension.

   * Variables are read from and communicated via the environment.
     *Note Variables from the Environment: Environment.

   * Options passed through the variable 'MAKEFLAGS' to recursive
     invocations of 'make'.  *Note Communicating Options to a
     Sub-'make': Options/Recursion.

   * The automatic variable '$%' is set to the member name in an archive
     reference.  *Note Automatic Variables::.

   * The automatic variables '$@', '$*', '$<', '$%', and '$?' have
     corresponding forms like '$(@F)' and '$(@D)'.  We have generalized
     this to '$^' as an obvious extension.  *Note Automatic Variables::.

   * Substitution variable references.  *Note Basics of Variable
     References: Reference.

   * The command line options '-b' and '-m', accepted and ignored.  In
     System V 'make', these options actually do something.

   * Execution of recursive commands to run 'make' via the variable
     'MAKE' even if '-n', '-q' or '-t' is specified.  *Note Recursive
     Use of 'make': Recursion.

   * Support for suffix '.a' in suffix rules.  *Note Archive Suffix
     Rules::.  This feature is obsolete in GNU 'make', because the
     general feature of rule chaining (*note Chains of Implicit Rules:
     Chained Rules.) allows one pattern rule for installing members in
     an archive (*note Archive Update::) to be sufficient.

   * The arrangement of lines and backslash/newline combinations in
     recipes is retained when the recipes are printed, so they appear as
     they do in the makefile, except for the stripping of initial
     whitespace.

   The following features were inspired by various other versions of
'make'.  In some cases it is unclear exactly which versions inspired
which others.

   * Pattern rules using '%'.  This has been implemented in several
     versions of 'make'.  We're not sure who invented it first, but it's
     been spread around a bit.  *Note Defining and Redefining Pattern
     Rules: Pattern Rules.

   * Rule chaining and implicit intermediate files.  This was
     implemented by Stu Feldman in his version of 'make' for AT&T Eighth
     Edition Research Unix, and later by Andrew Hume of AT&T Bell Labs
     in his 'mk' program (where he terms it "transitive closure").  We
     do not really know if we got this from either of them or thought it
     up ourselves at the same time.  *Note Chains of Implicit Rules:
     Chained Rules.

   * The automatic variable '$^' containing a list of all prerequisites
     of the current target.  We did not invent this, but we have no idea
     who did.  *Note Automatic Variables::.  The automatic variable '$+'
     is a simple extension of '$^'.

   * The "what if" flag ('-W' in GNU 'make') was (as far as we know)
     invented by Andrew Hume in 'mk'.  *Note Instead of Executing
     Recipes: Instead of Execution.

   * The concept of doing several things at once (parallelism) exists in
     many incarnations of 'make' and similar programs, though not in the
     System V or BSD implementations.  *Note Recipe Execution:
     Execution.

   * A number of different build tools that support parallelism also
     support collecting output and displaying as a single block.  *Note
     Output During Parallel Execution: Parallel Output.

   * Modified variable references using pattern substitution come from
     SunOS 4.  *Note Basics of Variable References: Reference.  This
     functionality was provided in GNU 'make' by the 'patsubst' function
     before the alternate syntax was implemented for compatibility with
     SunOS 4.  It is not altogether clear who inspired whom, since GNU
     'make' had 'patsubst' before SunOS 4 was released.

   * The special significance of '+' characters preceding recipe lines
     (*note Instead of Executing Recipes: Instead of Execution.) is
     mandated by 'IEEE Standard 1003.2-1992' (POSIX.2).

   * The '+=' syntax to append to the value of a variable comes from
     SunOS 4 'make'.  *Note Appending More Text to Variables: Appending.

   * The syntax 'ARCHIVE(MEM1 MEM2...)' to list multiple members in a
     single archive file comes from SunOS 4 'make'.  *Note Archive
     Members::.

   * The '-include' directive to include makefiles with no error for a
     nonexistent file comes from SunOS 4 'make'.  (But note that SunOS 4
     'make' does not allow multiple makefiles to be specified in one
     '-include' directive.)  The same feature appears with the name
     'sinclude' in SGI 'make' and perhaps others.

   * The '!=' shell assignment operator exists in many BSD of 'make' and
     is purposefully implemented here to behave identically to those
     implementations.

   * Various build management tools are implemented using scripting
     languages such as Perl or Python and thus provide a natural
     embedded scripting language, similar to GNU 'make''s integration of
     GNU Guile.

   The remaining features are inventions new in GNU 'make':

   * Use the '-v' or '--version' option to print version and copyright
     information.

   * Use the '-h' or '--help' option to summarize the options to 'make'.

   * Simply-expanded variables.  *Note The Two Flavors of Variables:
     Flavors.

   * Pass command line variable assignments automatically through the
     variable 'MAKE' to recursive 'make' invocations.  *Note Recursive
     Use of 'make': Recursion.

   * Use the '-C' or '--directory' command option to change directory.
     *Note Summary of Options: Options Summary.

   * Make verbatim variable definitions with 'define'.  *Note Defining
     Multi-Line Variables: Multi-Line.

   * Declare phony targets with the special target '.PHONY'.

     Andrew Hume of AT&T Bell Labs implemented a similar feature with a
     different syntax in his 'mk' program.  This seems to be a case of
     parallel discovery.  *Note Phony Targets: Phony Targets.

   * Manipulate text by calling functions.  *Note Functions for
     Transforming Text: Functions.

   * Use the '-o' or '--old-file' option to pretend a file's
     modification-time is old.  *Note Avoiding Recompilation of Some
     Files: Avoiding Compilation.

   * Conditional execution.

     This feature has been implemented numerous times in various
     versions of 'make'; it seems a natural extension derived from the
     features of the C preprocessor and similar macro languages and is
     not a revolutionary concept.  *Note Conditional Parts of Makefiles:
     Conditionals.

   * Specify a search path for included makefiles.  *Note Including
     Other Makefiles: Include.

   * Specify extra makefiles to read with an environment variable.
     *Note The Variable 'MAKEFILES': MAKEFILES Variable.

   * Strip leading sequences of './' from file names, so that './FILE'
     and 'FILE' are considered to be the same file.

   * Use a special search method for library prerequisites written in
     the form '-lNAME'.  *Note Directory Search for Link Libraries:
     Libraries/Search.

   * Allow suffixes for suffix rules (*note Old-Fashioned Suffix Rules:
     Suffix Rules.) to contain any characters.  In other versions of
     'make', they must begin with '.' and not contain any '/'
     characters.

   * Keep track of the current level of 'make' recursion using the
     variable 'MAKELEVEL'.  *Note Recursive Use of 'make': Recursion.

   * Provide any goals given on the command line in the variable
     'MAKECMDGOALS'.  *Note Arguments to Specify the Goals: Goals.

   * Specify static pattern rules.  *Note Static Pattern Rules: Static
     Pattern.

   * Provide selective 'vpath' search.  *Note Searching Directories for
     Prerequisites: Directory Search.

   * Provide computed variable references.  *Note Basics of Variable
     References: Reference.

   * Update makefiles.  *Note How Makefiles Are Remade: Remaking
     Makefiles.  System V 'make' has a very, very limited form of this
     functionality in that it will check out SCCS files for makefiles.

   * Various new built-in implicit rules.  *Note Catalogue of Built-In
     Rules: Catalogue of Rules.

   * Load dynamic objects which can modify the behavior of 'make'.
     *Note Loading Dynamic Objects: Loading Objects.


File: make.info,  Node: Missing,  Next: Makefile Conventions,  Prev: Features,  Up: Top

14 Incompatibilities and Missing Features
*****************************************

The 'make' programs in various other systems support a few features that
are not implemented in GNU 'make'.  The POSIX.2 standard ('IEEE Standard
1003.2-1992') which specifies 'make' does not require any of these
features.

   * A target of the form 'FILE((ENTRY))' stands for a member of archive
     file FILE.  The member is chosen, not by name, but by being an
     object file which defines the linker symbol ENTRY.

     This feature was not put into GNU 'make' because of the
     non-modularity of putting knowledge into 'make' of the internal
     format of archive file symbol tables.  *Note Updating Archive
     Symbol Directories: Archive Symbols.

   * Suffixes (used in suffix rules) that end with the character '~'
     have a special meaning to System V 'make'; they refer to the SCCS
     file that corresponds to the file one would get without the '~'.
     For example, the suffix rule '.c~.o' would make the file 'N.o' from
     the SCCS file 's.N.c'.  For complete coverage, a whole series of
     such suffix rules is required.  *Note Old-Fashioned Suffix Rules:
     Suffix Rules.

     In GNU 'make', this entire series of cases is handled by two
     pattern rules for extraction from SCCS, in combination with the
     general feature of rule chaining.  *Note Chains of Implicit Rules:
     Chained Rules.

   * In System V and 4.3 BSD 'make', files found by 'VPATH' search
     (*note Searching Directories for Prerequisites: Directory Search.)
     have their names changed inside recipes.  We feel it is much
     cleaner to always use automatic variables and thus make this
     feature obsolete.

   * In some Unix 'make's, the automatic variable '$*' appearing in the
     prerequisites of a rule has the amazingly strange "feature" of
     expanding to the full name of the _target of that rule_.  We cannot
     imagine what went on in the minds of Unix 'make' developers to do
     this; it is utterly inconsistent with the normal definition of
     '$*'.

   * In some Unix 'make's, implicit rule search (*note Using Implicit
     Rules: Implicit Rules.) is apparently done for _all_ targets, not
     just those without recipes.  This means you can do:

          foo.o:
                  cc -c foo.c

     and Unix 'make' will intuit that 'foo.o' depends on 'foo.c'.

     We feel that such usage is broken.  The prerequisite properties of
     'make' are well-defined (for GNU 'make', at least), and doing such
     a thing simply does not fit the model.

   * GNU 'make' does not include any built-in implicit rules for
     compiling or preprocessing EFL programs.  If we hear of anyone who
     is using EFL, we will gladly add them.

   * It appears that in SVR4 'make', a suffix rule can be specified with
     no recipe, and it is treated as if it had an empty recipe (*note
     Empty Recipes::).  For example:

          .c.a:

     will override the built-in '.c.a' suffix rule.

     We feel that it is cleaner for a rule without a recipe to always
     simply add to the prerequisite list for the target.  The above
     example can be easily rewritten to get the desired behavior in GNU
     'make':

          .c.a: ;

   * Some versions of 'make' invoke the shell with the '-e' flag, except
     under '-k' (*note Testing the Compilation of a Program: Testing.).
     The '-e' flag tells the shell to exit as soon as any program it
     runs returns a nonzero status.  We feel it is cleaner to write each
     line of the recipe to stand on its own and not require this special
     treatment.


File: make.info,  Node: Makefile Conventions,  Next: Quick Reference,  Prev: Missing,  Up: Top

15 Makefile Conventions
***********************

This node describes conventions for writing the Makefiles for GNU
programs.  Using Automake will help you write a Makefile that follows
these conventions.  For more information on portable Makefiles, see
POSIX and *note Portable Make Programming: (autoconf)Portable Make.

* Menu:

* Makefile Basics::             General conventions for Makefiles.
* Utilities in Makefiles::      Utilities to be used in Makefiles.
* Command Variables::           Variables for specifying commands.
* DESTDIR::                     Supporting staged installs.
* Directory Variables::         Variables for installation directories.
* Standard Targets::            Standard targets for users.
* Install Command Categories::  Three categories of commands in the 'install'
                                  rule: normal, pre-install and post-install.


File: make.info,  Node: Makefile Basics,  Next: Utilities in Makefiles,  Up: Makefile Conventions

15.1 General Conventions for Makefiles
======================================

Every Makefile should contain this line:

     SHELL = /bin/sh

to avoid trouble on systems where the 'SHELL' variable might be
inherited from the environment.  (This is never a problem with GNU
'make'.)

   Different 'make' programs have incompatible suffix lists and implicit
rules, and this sometimes creates confusion or misbehavior.  So it is a
good idea to set the suffix list explicitly using only the suffixes you
need in the particular Makefile, like this:

     .SUFFIXES:
     .SUFFIXES: .c .o

The first line clears out the suffix list, the second introduces all
suffixes which may be subject to implicit rules in this Makefile.

   Don't assume that '.' is in the path for command execution.  When you
need to run programs that are a part of your package during the make,
please make sure that it uses './' if the program is built as part of
the make or '$(srcdir)/' if the file is an unchanging part of the source
code.  Without one of these prefixes, the current search path is used.

   The distinction between './' (the "build directory") and '$(srcdir)/'
(the "source directory") is important because users can build in a
separate directory using the '--srcdir' option to 'configure'.  A rule
of the form:

     foo.1 : foo.man sedscript
             sed -f sedscript foo.man > foo.1

will fail when the build directory is not the source directory, because
'foo.man' and 'sedscript' are in the source directory.

   When using GNU 'make', relying on 'VPATH' to find the source file
will work in the case where there is a single dependency file, since the
'make' automatic variable '$<' will represent the source file wherever
it is.  (Many versions of 'make' set '$<' only in implicit rules.)  A
Makefile target like

     foo.o : bar.c
             $(CC) -I. -I$(srcdir) $(CFLAGS) -c bar.c -o foo.o

should instead be written as

     foo.o : bar.c
             $(CC) -I. -I$(srcdir) $(CFLAGS) -c $< -o $@

in order to allow 'VPATH' to work correctly.  When the target has
multiple dependencies, using an explicit '$(srcdir)' is the easiest way
to make the rule work well.  For example, the target above for 'foo.1'
is best written as:

     foo.1 : foo.man sedscript
             sed -f $(srcdir)/sedscript $(srcdir)/foo.man > $@

   GNU distributions usually contain some files which are not source
files--for example, Info files, and the output from Autoconf, Automake,
Bison or Flex.  Since these files normally appear in the source
directory, they should always appear in the source directory, not in the
build directory.  So Makefile rules to update them should put the
updated files in the source directory.

   However, if a file does not appear in the distribution, then the
Makefile should not put it in the source directory, because building a
program in ordinary circumstances should not modify the source directory
in any way.

   Try to make the build and installation targets, at least (and all
their subtargets) work correctly with a parallel 'make'.


File: make.info,  Node: Utilities in Makefiles,  Next: Command Variables,  Prev: Makefile Basics,  Up: Makefile Conventions

15.2 Utilities in Makefiles
===========================

Write the Makefile commands (and any shell scripts, such as 'configure')
to run under 'sh' (both the traditional Bourne shell and the POSIX
shell), not 'csh'.  Don't use any special features of 'ksh' or 'bash',
or POSIX features not widely supported in traditional Bourne 'sh'.

   The 'configure' script and the Makefile rules for building and
installation should not use any utilities directly except these:

     awk cat cmp cp diff echo egrep expr false grep install-info ln ls
     mkdir mv printf pwd rm rmdir sed sleep sort tar test touch tr true

   Compression programs such as 'gzip' can be used in the 'dist' rule.

   Generally, stick to the widely-supported (usually POSIX-specified)
options and features of these programs.  For example, don't use 'mkdir
-p', convenient as it may be, because a few systems don't support it at
all and with others, it is not safe for parallel execution.  For a list
of known incompatibilities, see *note Portable Shell Programming:
(autoconf)Portable Shell.

   It is a good idea to avoid creating symbolic links in makefiles,
since a few file systems don't support them.

   The Makefile rules for building and installation can also use
compilers and related programs, but should do so via 'make' variables so
that the user can substitute alternatives.  Here are some of the
programs we mean:

     ar bison cc flex install ld ldconfig lex
     make makeinfo ranlib texi2dvi yacc

   Use the following 'make' variables to run those programs:

     $(AR) $(BISON) $(CC) $(FLEX) $(INSTALL) $(LD) $(LDCONFIG) $(LEX)
     $(MAKE) $(MAKEINFO) $(RANLIB) $(TEXI2DVI) $(YACC)

   When you use 'ranlib' or 'ldconfig', you should make sure nothing bad
happens if the system does not have the program in question.  Arrange to
ignore an error from that command, and print a message before the
command to tell the user that failure of this command does not mean a
problem.  (The Autoconf 'AC_PROG_RANLIB' macro can help with this.)

   If you use symbolic links, you should implement a fallback for
systems that don't have symbolic links.

   Additional utilities that can be used via Make variables are:

     chgrp chmod chown mknod

   It is ok to use other utilities in Makefile portions (or scripts)
intended only for particular systems where you know those utilities
exist.


File: make.info,  Node: Command Variables,  Next: DESTDIR,  Prev: Utilities in Makefiles,  Up: Makefile Conventions

15.3 Variables for Specifying Commands
======================================

Makefiles should provide variables for overriding certain commands,
options, and so on.

   In particular, you should run most utility programs via variables.
Thus, if you use Bison, have a variable named 'BISON' whose default
value is set with 'BISON = bison', and refer to it with '$(BISON)'
whenever you need to use Bison.

   File management utilities such as 'ln', 'rm', 'mv', and so on, need
not be referred to through variables in this way, since users don't need
to replace them with other programs.

   Each program-name variable should come with an options variable that
is used to supply options to the program.  Append 'FLAGS' to the
program-name variable name to get the options variable name--for
example, 'BISONFLAGS'.  (The names 'CFLAGS' for the C compiler, 'YFLAGS'
for yacc, and 'LFLAGS' for lex, are exceptions to this rule, but we keep
them because they are standard.)  Use 'CPPFLAGS' in any compilation
command that runs the preprocessor, and use 'LDFLAGS' in any compilation
command that does linking as well as in any direct use of 'ld'.

   If there are C compiler options that _must_ be used for proper
compilation of certain files, do not include them in 'CFLAGS'.  Users
expect to be able to specify 'CFLAGS' freely themselves.  Instead,
arrange to pass the necessary options to the C compiler independently of
'CFLAGS', by writing them explicitly in the compilation commands or by
defining an implicit rule, like this:

     CFLAGS = -g
     ALL_CFLAGS = -I. $(CFLAGS)
     .c.o:
             $(CC) -c $(CPPFLAGS) $(ALL_CFLAGS) $<

   Do include the '-g' option in 'CFLAGS', because that is not
_required_ for proper compilation.  You can consider it a default that
is only recommended.  If the package is set up so that it is compiled
with GCC by default, then you might as well include '-O' in the default
value of 'CFLAGS' as well.

   Put 'CFLAGS' last in the compilation command, after other variables
containing compiler options, so the user can use 'CFLAGS' to override
the others.

   'CFLAGS' should be used in every invocation of the C compiler, both
those which do compilation and those which do linking.

   Every Makefile should define the variable 'INSTALL', which is the
basic command for installing a file into the system.

   Every Makefile should also define the variables 'INSTALL_PROGRAM' and
'INSTALL_DATA'.  (The default for 'INSTALL_PROGRAM' should be
'$(INSTALL)'; the default for 'INSTALL_DATA' should be '${INSTALL} -m
644'.)  Then it should use those variables as the commands for actual
installation, for executables and non-executables respectively.  Minimal
use of these variables is as follows:

     $(INSTALL_PROGRAM) foo $(bindir)/foo
     $(INSTALL_DATA) libfoo.a $(libdir)/libfoo.a

   However, it is preferable to support a 'DESTDIR' prefix on the target
files, as explained in the next section.

   It is acceptable, but not required, to install multiple files in one
command, with the final argument being a directory, as in:

     $(INSTALL_PROGRAM) foo bar baz $(bindir)


File: make.info,  Node: DESTDIR,  Next: Directory Variables,  Prev: Command Variables,  Up: Makefile Conventions

15.4 'DESTDIR': Support for Staged Installs
===========================================

'DESTDIR' is a variable prepended to each installed target file, like
this:

     $(INSTALL_PROGRAM) foo $(DESTDIR)$(bindir)/foo
     $(INSTALL_DATA) libfoo.a $(DESTDIR)$(libdir)/libfoo.a

   The 'DESTDIR' variable is specified by the user on the 'make' command
line as an absolute file name.  For example:

     make DESTDIR=/tmp/stage install

'DESTDIR' should be supported only in the 'install*' and 'uninstall*'
targets, as those are the only targets where it is useful.

   If your installation step would normally install '/usr/local/bin/foo'
and '/usr/local/lib/libfoo.a', then an installation invoked as in the
example above would install '/tmp/stage/usr/local/bin/foo' and
'/tmp/stage/usr/local/lib/libfoo.a' instead.

   Prepending the variable 'DESTDIR' to each target in this way provides
for "staged installs", where the installed files are not placed directly
into their expected location but are instead copied into a temporary
location ('DESTDIR').  However, installed files maintain their relative
directory structure and any embedded file names will not be modified.

   You should not set the value of 'DESTDIR' in your 'Makefile' at all;
then the files are installed into their expected locations by default.
Also, specifying 'DESTDIR' should not change the operation of the
software in any way, so its value should not be included in any file
contents.

   'DESTDIR' support is commonly used in package creation.  It is also
helpful to users who want to understand what a given package will
install where, and to allow users who don't normally have permissions to
install into protected areas to build and install before gaining those
permissions.  Finally, it can be useful with tools such as 'stow', where
code is installed in one place but made to appear to be installed
somewhere else using symbolic links or special mount operations.  So, we
strongly recommend GNU packages support 'DESTDIR', though it is not an
absolute requirement.


File: make.info,  Node: Directory Variables,  Next: Standard Targets,  Prev: DESTDIR,  Up: Makefile Conventions

15.5 Variables for Installation Directories
===========================================

Installation directories should always be named by variables, so it is
easy to install in a nonstandard place.  The standard names for these
variables and the values they should have in GNU packages are described
below.  They are based on a standard file system layout; variants of it
are used in GNU/Linux and other modern operating systems.

   Installers are expected to override these values when calling 'make'
(e.g., 'make prefix=/usr install' or 'configure' (e.g., 'configure
--prefix=/usr').  GNU packages should not try to guess which value
should be appropriate for these variables on the system they are being
installed onto: use the default settings specified here so that all GNU
packages behave identically, allowing the installer to achieve any
desired layout.

   All installation directories, and their parent directories, should be
created (if necessary) before they are installed into.

   These first two variables set the root for the installation.  All the
other installation directories should be subdirectories of one of these
two, and nothing should be directly installed into these two
directories.

'prefix'
     A prefix used in constructing the default values of the variables
     listed below.  The default value of 'prefix' should be
     '/usr/local'.  When building the complete GNU system, the prefix
     will be empty and '/usr' will be a symbolic link to '/'.  (If you
     are using Autoconf, write it as '@prefix@'.)

     Running 'make install' with a different value of 'prefix' from the
     one used to build the program should _not_ recompile the program.

'exec_prefix'
     A prefix used in constructing the default values of some of the
     variables listed below.  The default value of 'exec_prefix' should
     be '$(prefix)'.  (If you are using Autoconf, write it as
     '@exec_prefix@'.)

     Generally, '$(exec_prefix)' is used for directories that contain
     machine-specific files (such as executables and subroutine
     libraries), while '$(prefix)' is used directly for other
     directories.

     Running 'make install' with a different value of 'exec_prefix' from
     the one used to build the program should _not_ recompile the
     program.

   Executable programs are installed in one of the following
directories.

'bindir'
     The directory for installing executable programs that users can
     run.  This should normally be '/usr/local/bin', but write it as
     '$(exec_prefix)/bin'.  (If you are using Autoconf, write it as
     '@bindir@'.)

'sbindir'
     The directory for installing executable programs that can be run
     from the shell, but are only generally useful to system
     administrators.  This should normally be '/usr/local/sbin', but
     write it as '$(exec_prefix)/sbin'.  (If you are using Autoconf,
     write it as '@sbindir@'.)

'libexecdir'
     The directory for installing executable programs to be run by other
     programs rather than by users.  This directory should normally be
     '/usr/local/libexec', but write it as '$(exec_prefix)/libexec'.
     (If you are using Autoconf, write it as '@libexecdir@'.)

     The definition of 'libexecdir' is the same for all packages, so you
     should install your data in a subdirectory thereof.  Most packages
     install their data under '$(libexecdir)/PACKAGE-NAME/', possibly
     within additional subdirectories thereof, such as
     '$(libexecdir)/PACKAGE-NAME/MACHINE/VERSION'.

   Data files used by the program during its execution are divided into
categories in two ways.

   * Some files are normally modified by programs; others are never
     normally modified (though users may edit some of these).

   * Some files are architecture-independent and can be shared by all
     machines at a site; some are architecture-dependent and can be
     shared only by machines of the same kind and operating system;
     others may never be shared between two machines.

   This makes for six different possibilities.  However, we want to
discourage the use of architecture-dependent files, aside from object
files and libraries.  It is much cleaner to make other data files
architecture-independent, and it is generally not hard.

   Here are the variables Makefiles should use to specify directories to
put these various kinds of files in:

'datarootdir'
     The root of the directory tree for read-only
     architecture-independent data files.  This should normally be
     '/usr/local/share', but write it as '$(prefix)/share'.  (If you are
     using Autoconf, write it as '@datarootdir@'.)  'datadir''s default
     value is based on this variable; so are 'infodir', 'mandir', and
     others.

'datadir'
     The directory for installing idiosyncratic read-only
     architecture-independent data files for this program.  This is
     usually the same place as 'datarootdir', but we use the two
     separate variables so that you can move these program-specific
     files without altering the location for Info files, man pages, etc.

     This should normally be '/usr/local/share', but write it as
     '$(datarootdir)'.  (If you are using Autoconf, write it as
     '@datadir@'.)

     The definition of 'datadir' is the same for all packages, so you
     should install your data in a subdirectory thereof.  Most packages
     install their data under '$(datadir)/PACKAGE-NAME/'.

'sysconfdir'
     The directory for installing read-only data files that pertain to a
     single machine-that is to say, files for configuring a host.
     Mailer and network configuration files, '/etc/passwd', and so forth
     belong here.  All the files in this directory should be ordinary
     ASCII text files.  This directory should normally be
     '/usr/local/etc', but write it as '$(prefix)/etc'.  (If you are
     using Autoconf, write it as '@sysconfdir@'.)

     Do not install executables here in this directory (they probably
     belong in '$(libexecdir)' or '$(sbindir)').  Also do not install
     files that are modified in the normal course of their use (programs
     whose purpose is to change the configuration of the system
     excluded).  Those probably belong in '$(localstatedir)'.

'sharedstatedir'
     The directory for installing architecture-independent data files
     which the programs modify while they run.  This should normally be
     '/usr/local/com', but write it as '$(prefix)/com'.  (If you are
     using Autoconf, write it as '@sharedstatedir@'.)

'localstatedir'
     The directory for installing data files which the programs modify
     while they run, and that pertain to one specific machine.  Users
     should never need to modify files in this directory to configure
     the package's operation; put such configuration information in
     separate files that go in '$(datadir)' or '$(sysconfdir)'.
     '$(localstatedir)' should normally be '/usr/local/var', but write
     it as '$(prefix)/var'.  (If you are using Autoconf, write it as
     '@localstatedir@'.)

'runstatedir'
     The directory for installing data files which the programs modify
     while they run, that pertain to one specific machine, and which
     need not persist longer than the execution of the program--which is
     generally long-lived, for example, until the next reboot.  PID
     files for system daemons are a typical use.  In addition, this
     directory should not be cleaned except perhaps at reboot, while the
     general '/tmp' ('TMPDIR') may be cleaned arbitrarily.  This should
     normally be '/var/run', but write it as '$(localstatedir)/run'.
     Having it as a separate variable allows the use of '/run' if
     desired, for example.  (If you are using Autoconf 2.70 or later,
     write it as '@runstatedir@'.)

   These variables specify the directory for installing certain specific
types of files, if your program has them.  Every GNU package should have
Info files, so every program needs 'infodir', but not all need 'libdir'
or 'lispdir'.

'includedir'
     The directory for installing header files to be included by user
     programs with the C '#include' preprocessor directive.  This should
     normally be '/usr/local/include', but write it as
     '$(prefix)/include'.  (If you are using Autoconf, write it as
     '@includedir@'.)

     Most compilers other than GCC do not look for header files in
     directory '/usr/local/include'.  So installing the header files
     this way is only useful with GCC. Sometimes this is not a problem
     because some libraries are only really intended to work with GCC.
     But some libraries are intended to work with other compilers.  They
     should install their header files in two places, one specified by
     'includedir' and one specified by 'oldincludedir'.

'oldincludedir'
     The directory for installing '#include' header files for use with
     compilers other than GCC. This should normally be '/usr/include'.
     (If you are using Autoconf, you can write it as '@oldincludedir@'.)

     The Makefile commands should check whether the value of
     'oldincludedir' is empty.  If it is, they should not try to use it;
     they should cancel the second installation of the header files.

     A package should not replace an existing header in this directory
     unless the header came from the same package.  Thus, if your Foo
     package provides a header file 'foo.h', then it should install the
     header file in the 'oldincludedir' directory if either (1) there is
     no 'foo.h' there or (2) the 'foo.h' that exists came from the Foo
     package.

     To tell whether 'foo.h' came from the Foo package, put a magic
     string in the file--part of a comment--and 'grep' for that string.

'docdir'
     The directory for installing documentation files (other than Info)
     for this package.  By default, it should be
     '/usr/local/share/doc/YOURPKG', but it should be written as
     '$(datarootdir)/doc/YOURPKG'.  (If you are using Autoconf, write it
     as '@docdir@'.)  The YOURPKG subdirectory, which may include a
     version number, prevents collisions among files with common names,
     such as 'README'.

'infodir'
     The directory for installing the Info files for this package.  By
     default, it should be '/usr/local/share/info', but it should be
     written as '$(datarootdir)/info'.  (If you are using Autoconf,
     write it as '@infodir@'.)  'infodir' is separate from 'docdir' for
     compatibility with existing practice.

'htmldir'
'dvidir'
'pdfdir'
'psdir'
     Directories for installing documentation files in the particular
     format.  They should all be set to '$(docdir)' by default.  (If you
     are using Autoconf, write them as '@htmldir@', '@dvidir@', etc.)
     Packages which supply several translations of their documentation
     should install them in '$(htmldir)/'LL, '$(pdfdir)/'LL, etc.  where
     LL is a locale abbreviation such as 'en' or 'pt_BR'.

'libdir'
     The directory for object files and libraries of object code.  Do
     not install executables here, they probably ought to go in
     '$(libexecdir)' instead.  The value of 'libdir' should normally be
     '/usr/local/lib', but write it as '$(exec_prefix)/lib'.  (If you
     are using Autoconf, write it as '@libdir@'.)

'lispdir'
     The directory for installing any Emacs Lisp files in this package.
     By default, it should be '/usr/local/share/emacs/site-lisp', but it
     should be written as '$(datarootdir)/emacs/site-lisp'.

     If you are using Autoconf, write the default as '@lispdir@'.  In
     order to make '@lispdir@' work, you need the following lines in
     your 'configure.ac' file:

          lispdir='${datarootdir}/emacs/site-lisp'
          AC_SUBST(lispdir)

'localedir'
     The directory for installing locale-specific message catalogs for
     this package.  By default, it should be '/usr/local/share/locale',
     but it should be written as '$(datarootdir)/locale'.  (If you are
     using Autoconf, write it as '@localedir@'.)  This directory usually
     has a subdirectory per locale.

   Unix-style man pages are installed in one of the following:

'mandir'
     The top-level directory for installing the man pages (if any) for
     this package.  It will normally be '/usr/local/share/man', but you
     should write it as '$(datarootdir)/man'.  (If you are using
     Autoconf, write it as '@mandir@'.)

'man1dir'
     The directory for installing section 1 man pages.  Write it as
     '$(mandir)/man1'.
'man2dir'
     The directory for installing section 2 man pages.  Write it as
     '$(mandir)/man2'
'...'

     *Don't make the primary documentation for any GNU software be a man
     page.  Write a manual in Texinfo instead.  Man pages are just for
     the sake of people running GNU software on Unix, which is a
     secondary application only.*

'manext'
     The file name extension for the installed man page.  This should
     contain a period followed by the appropriate digit; it should
     normally be '.1'.

'man1ext'
     The file name extension for installed section 1 man pages.
'man2ext'
     The file name extension for installed section 2 man pages.
'...'
     Use these names instead of 'manext' if the package needs to install
     man pages in more than one section of the manual.

   And finally, you should set the following variable:

'srcdir'
     The directory for the sources being compiled.  The value of this
     variable is normally inserted by the 'configure' shell script.  (If
     you are using Autoconf, use 'srcdir = @srcdir@'.)

   For example:

     # Common prefix for installation directories.
     # NOTE: This directory must exist when you start the install.
     prefix = /usr/local
     datarootdir = $(prefix)/share
     datadir = $(datarootdir)
     exec_prefix = $(prefix)
     # Where to put the executable for the command `gcc'.
     bindir = $(exec_prefix)/bin
     # Where to put the directories used by the compiler.
     libexecdir = $(exec_prefix)/libexec
     # Where to put the Info files.
     infodir = $(datarootdir)/info

   If your program installs a large number of files into one of the
standard user-specified directories, it might be useful to group them
into a subdirectory particular to that program.  If you do this, you
should write the 'install' rule to create these subdirectories.

   Do not expect the user to include the subdirectory name in the value
of any of the variables listed above.  The idea of having a uniform set
of variable names for installation directories is to enable the user to
specify the exact same values for several different GNU packages.  In
order for this to be useful, all the packages must be designed so that
they will work sensibly when the user does so.

   At times, not all of these variables may be implemented in the
current release of Autoconf and/or Automake; but as of Autoconf 2.60, we
believe all of them are.  When any are missing, the descriptions here
serve as specifications for what Autoconf will implement.  As a
programmer, you can either use a development version of Autoconf or
avoid using these variables until a stable release is made which
supports them.


File: make.info,  Node: Standard Targets,  Next: Install Command Categories,  Prev: Directory Variables,  Up: Makefile Conventions

15.6 Standard Targets for Users
===============================

All GNU programs should have the following targets in their Makefiles:

'all'
     Compile the entire program.  This should be the default target.
     This target need not rebuild any documentation files; Info files
     should normally be included in the distribution, and DVI (and other
     documentation format) files should be made only when explicitly
     asked for.

     By default, the Make rules should compile and link with '-g', so
     that executable programs have debugging symbols.  Otherwise, you
     are essentially helpless in the face of a crash, and it is often
     far from easy to reproduce with a fresh build.

'install'
     Compile the program and copy the executables, libraries, and so on
     to the file names where they should reside for actual use.  If
     there is a simple test to verify that a program is properly
     installed, this target should run that test.

     Do not strip executables when installing them.  This helps eventual
     debugging that may be needed later, and nowadays disk space is
     cheap and dynamic loaders typically ensure debug sections are not
     loaded during normal execution.  Users that need stripped binaries
     may invoke the 'install-strip' target to do that.

     If possible, write the 'install' target rule so that it does not
     modify anything in the directory where the program was built,
     provided 'make all' has just been done.  This is convenient for
     building the program under one user name and installing it under
     another.

     The commands should create all the directories in which files are
     to be installed, if they don't already exist.  This includes the
     directories specified as the values of the variables 'prefix' and
     'exec_prefix', as well as all subdirectories that are needed.  One
     way to do this is by means of an 'installdirs' target as described
     below.

     Use '-' before any command for installing a man page, so that
     'make' will ignore any errors.  This is in case there are systems
     that don't have the Unix man page documentation system installed.

     The way to install Info files is to copy them into '$(infodir)'
     with '$(INSTALL_DATA)' (*note Command Variables::), and then run
     the 'install-info' program if it is present.  'install-info' is a
     program that edits the Info 'dir' file to add or update the menu
     entry for the given Info file; it is part of the Texinfo package.

     Here is a sample rule to install an Info file that also tries to
     handle some additional situations, such as 'install-info' not being
     present.

          do-install-info: foo.info installdirs
                  $(NORMAL_INSTALL)
          # Prefer an info file in . to one in srcdir.
                  if test -f foo.info; then d=.; \
                   else d="$(srcdir)"; fi; \
                  $(INSTALL_DATA) $$d/foo.info \
                    "$(DESTDIR)$(infodir)/foo.info"
          # Run install-info only if it exists.
          # Use `if' instead of just prepending `-' to the
          # line so we notice real errors from install-info.
          # Use `$(SHELL) -c' because some shells do not
          # fail gracefully when there is an unknown command.
                  $(POST_INSTALL)
                  if $(SHELL) -c 'install-info --version' \
                     >/dev/null 2>&1; then \
                    install-info --dir-file="$(DESTDIR)$(infodir)/dir" \
                                 "$(DESTDIR)$(infodir)/foo.info"; \
                  else true; fi

     When writing the 'install' target, you must classify all the
     commands into three categories: normal ones, "pre-installation"
     commands and "post-installation" commands.  *Note Install Command
     Categories::.

'install-html'
'install-dvi'
'install-pdf'
'install-ps'
     These targets install documentation in formats other than Info;
     they're intended to be called explicitly by the person installing
     the package, if that format is desired.  GNU prefers Info files, so
     these must be installed by the 'install' target.

     When you have many documentation files to install, we recommend
     that you avoid collisions and clutter by arranging for these
     targets to install in subdirectories of the appropriate
     installation directory, such as 'htmldir'.  As one example, if your
     package has multiple manuals, and you wish to install HTML
     documentation with many files (such as the "split" mode output by
     'makeinfo --html'), you'll certainly want to use subdirectories, or
     two nodes with the same name in different manuals will overwrite
     each other.

     Please make these 'install-FORMAT' targets invoke the commands for
     the FORMAT target, for example, by making FORMAT a dependency.

'uninstall'
     Delete all the installed files--the copies that the 'install' and
     'install-*' targets create.

     This rule should not modify the directories where compilation is
     done, only the directories where files are installed.

     The uninstallation commands are divided into three categories, just
     like the installation commands.  *Note Install Command
     Categories::.

'install-strip'
     Like 'install', but strip the executable files while installing
     them.  In simple cases, this target can use the 'install' target in
     a simple way:

          install-strip:
                  $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' \
                          install

     But if the package installs scripts as well as real executables,
     the 'install-strip' target can't just refer to the 'install'
     target; it has to strip the executables but not the scripts.

     'install-strip' should not strip the executables in the build
     directory which are being copied for installation.  It should only
     strip the copies that are installed.

     Normally we do not recommend stripping an executable unless you are
     sure the program has no bugs.  However, it can be reasonable to
     install a stripped executable for actual execution while saving the
     unstripped executable elsewhere in case there is a bug.

'clean'
     Delete all files in the current directory that are normally created
     by building the program.  Also delete files in other directories if
     they are created by this makefile.  However, don't delete the files
     that record the configuration.  Also preserve files that could be
     made by building, but normally aren't because the distribution
     comes with them.  There is no need to delete parent directories
     that were created with 'mkdir -p', since they could have existed
     anyway.

     Delete '.dvi' files here if they are not part of the distribution.

'distclean'
     Delete all files in the current directory (or created by this
     makefile) that are created by configuring or building the program.
     If you have unpacked the source and built the program without
     creating any other files, 'make distclean' should leave only the
     files that were in the distribution.  However, there is no need to
     delete parent directories that were created with 'mkdir -p', since
     they could have existed anyway.

'mostlyclean'
     Like 'clean', but may refrain from deleting a few files that people
     normally don't want to recompile.  For example, the 'mostlyclean'
     target for GCC does not delete 'libgcc.a', because recompiling it
     is rarely necessary and takes a lot of time.

'maintainer-clean'
     Delete almost everything that can be reconstructed with this
     Makefile.  This typically includes everything deleted by
     'distclean', plus more: C source files produced by Bison, tags
     tables, Info files, and so on.

     The reason we say "almost everything" is that running the command
     'make maintainer-clean' should not delete 'configure' even if
     'configure' can be remade using a rule in the Makefile.  More
     generally, 'make maintainer-clean' should not delete anything that
     needs to exist in order to run 'configure' and then begin to build
     the program.  Also, there is no need to delete parent directories
     that were created with 'mkdir -p', since they could have existed
     anyway.  These are the only exceptions; 'maintainer-clean' should
     delete everything else that can be rebuilt.

     The 'maintainer-clean' target is intended to be used by a
     maintainer of the package, not by ordinary users.  You may need
     special tools to reconstruct some of the files that 'make
     maintainer-clean' deletes.  Since these files are normally included
     in the distribution, we don't take care to make them easy to
     reconstruct.  If you find you need to unpack the full distribution
     again, don't blame us.

     To help make users aware of this, the commands for the special
     'maintainer-clean' target should start with these two:

          @echo 'This command is intended for maintainers to use; it'
          @echo 'deletes files that may need special tools to rebuild.'

'TAGS'
     Update a tags table for this program.

'info'
     Generate any Info files needed.  The best way to write the rules is
     as follows:

          info: foo.info

          foo.info: foo.texi chap1.texi chap2.texi
                  $(MAKEINFO) $(srcdir)/foo.texi

     You must define the variable 'MAKEINFO' in the Makefile.  It should
     run the 'makeinfo' program, which is part of the Texinfo
     distribution.

     Normally a GNU distribution comes with Info files, and that means
     the Info files are present in the source directory.  Therefore, the
     Make rule for an info file should update it in the source
     directory.  When users build the package, ordinarily Make will not
     update the Info files because they will already be up to date.

'dvi'
'html'
'pdf'
'ps'
     Generate documentation files in the given format.  These targets
     should always exist, but any or all can be a no-op if the given
     output format cannot be generated.  These targets should not be
     dependencies of the 'all' target; the user must manually invoke
     them.

     Here's an example rule for generating DVI files from Texinfo:

          dvi: foo.dvi

          foo.dvi: foo.texi chap1.texi chap2.texi
                  $(TEXI2DVI) $(srcdir)/foo.texi

     You must define the variable 'TEXI2DVI' in the Makefile.  It should
     run the program 'texi2dvi', which is part of the Texinfo
     distribution.  ('texi2dvi' uses TeX to do the real work of
     formatting.  TeX is not distributed with Texinfo.)  Alternatively,
     write only the dependencies, and allow GNU 'make' to provide the
     command.

     Here's another example, this one for generating HTML from Texinfo:

          html: foo.html

          foo.html: foo.texi chap1.texi chap2.texi
                  $(TEXI2HTML) $(srcdir)/foo.texi

     Again, you would define the variable 'TEXI2HTML' in the Makefile;
     for example, it might run 'makeinfo --no-split --html' ('makeinfo'
     is part of the Texinfo distribution).

'dist'
     Create a distribution tar file for this program.  The tar file
     should be set up so that the file names in the tar file start with
     a subdirectory name which is the name of the package it is a
     distribution for.  This name can include the version number.

     For example, the distribution tar file of GCC version 1.40 unpacks
     into a subdirectory named 'gcc-1.40'.

     The easiest way to do this is to create a subdirectory
     appropriately named, use 'ln' or 'cp' to install the proper files
     in it, and then 'tar' that subdirectory.

     Compress the tar file with 'gzip'.  For example, the actual
     distribution file for GCC version 1.40 is called 'gcc-1.40.tar.gz'.
     It is ok to support other free compression formats as well.

     The 'dist' target should explicitly depend on all non-source files
     that are in the distribution, to make sure they are up to date in
     the distribution.  *Note Making Releases: (standards)Releases.

'check'
     Perform self-tests (if any).  The user must build the program
     before running the tests, but need not install the program; you
     should write the self-tests so that they work when the program is
     built but not installed.

   The following targets are suggested as conventional names, for
programs in which they are useful.

'installcheck'
     Perform installation tests (if any).  The user must build and
     install the program before running the tests.  You should not
     assume that '$(bindir)' is in the search path.

'installdirs'
     It's useful to add a target named 'installdirs' to create the
     directories where files are installed, and their parent
     directories.  There is a script called 'mkinstalldirs' which is
     convenient for this; you can find it in the Gnulib package.  You
     can use a rule like this:

          # Make sure all installation directories (e.g. $(bindir))
          # actually exist by making them if necessary.
          installdirs: mkinstalldirs
                  $(srcdir)/mkinstalldirs $(bindir) $(datadir) \
                                          $(libdir) $(infodir) \
                                          $(mandir)

     or, if you wish to support 'DESTDIR' (strongly encouraged),

          # Make sure all installation directories (e.g. $(bindir))
          # actually exist by making them if necessary.
          installdirs: mkinstalldirs
                  $(srcdir)/mkinstalldirs \
                      $(DESTDIR)$(bindir) $(DESTDIR)$(datadir) \
                      $(DESTDIR)$(libdir) $(DESTDIR)$(infodir) \
                      $(DESTDIR)$(mandir)

     This rule should not modify the directories where compilation is
     done.  It should do nothing but create installation directories.


File: make.info,  Node: Install Command Categories,  Prev: Standard Targets,  Up: Makefile Conventions

15.7 Install Command Categories
===============================

When writing the 'install' target, you must classify all the commands
into three categories: normal ones, "pre-installation" commands and
"post-installation" commands.

   Normal commands move files into their proper places, and set their
modes.  They may not alter any files except the ones that come entirely
from the package they belong to.

   Pre-installation and post-installation commands may alter other
files; in particular, they can edit global configuration files or data
bases.

   Pre-installation commands are typically executed before the normal
commands, and post-installation commands are typically run after the
normal commands.

   The most common use for a post-installation command is to run
'install-info'.  This cannot be done with a normal command, since it
alters a file (the Info directory) which does not come entirely and
solely from the package being installed.  It is a post-installation
command because it needs to be done after the normal command which
installs the package's Info files.

   Most programs don't need any pre-installation commands, but we have
the feature just in case it is needed.

   To classify the commands in the 'install' rule into these three
categories, insert "category lines" among them.  A category line
specifies the category for the commands that follow.

   A category line consists of a tab and a reference to a special Make
variable, plus an optional comment at the end.  There are three
variables you can use, one for each category; the variable name
specifies the category.  Category lines are no-ops in ordinary execution
because these three Make variables are normally undefined (and you
_should not_ define them in the makefile).

   Here are the three possible category lines, each with a comment that
explains what it means:

             $(PRE_INSTALL)     # Pre-install commands follow.
             $(POST_INSTALL)    # Post-install commands follow.
             $(NORMAL_INSTALL)  # Normal commands follow.

   If you don't use a category line at the beginning of the 'install'
rule, all the commands are classified as normal until the first category
line.  If you don't use any category lines, all the commands are
classified as normal.

   These are the category lines for 'uninstall':

             $(PRE_UNINSTALL)     # Pre-uninstall commands follow.
             $(POST_UNINSTALL)    # Post-uninstall commands follow.
             $(NORMAL_UNINSTALL)  # Normal commands follow.

   Typically, a pre-uninstall command would be used for deleting entries
from the Info directory.

   If the 'install' or 'uninstall' target has any dependencies which act
as subroutines of installation, then you should start _each_
dependency's commands with a category line, and start the main target's
commands with a category line also.  This way, you can ensure that each
command is placed in the right category regardless of which of the
dependencies actually run.

   Pre-installation and post-installation commands should not run any
programs except for these:

     [ basename bash cat chgrp chmod chown cmp cp dd diff echo
     egrep expand expr false fgrep find getopt grep gunzip gzip
     hostname install install-info kill ldconfig ln ls md5sum
     mkdir mkfifo mknod mv printenv pwd rm rmdir sed sort tee
     test touch true uname xargs yes

   The reason for distinguishing the commands in this way is for the
sake of making binary packages.  Typically a binary package contains all
the executables and other files that need to be installed, and has its
own method of installing them--so it does not need to run the normal
installation commands.  But installing the binary package does need to
execute the pre-installation and post-installation commands.

   Programs to build binary packages work by extracting the
pre-installation and post-installation commands.  Here is one way of
extracting the pre-installation commands (the '-s' option to 'make' is
needed to silence messages about entering subdirectories):

     make -s -n install -o all \
           PRE_INSTALL=pre-install \
           POST_INSTALL=post-install \
           NORMAL_INSTALL=normal-install \
       | gawk -f pre-install.awk

where the file 'pre-install.awk' could contain this:

     $0 ~ /^(normal-install|post-install)[ \t]*$/ {on = 0}
     on {print $0}
     $0 ~ /^pre-install[ \t]*$/ {on = 1}


File: make.info,  Node: Quick Reference,  Next: Error Messages,  Prev: Makefile Conventions,  Up: Top

Appendix A Quick Reference
**************************

This appendix summarizes the directives, text manipulation functions,
and special variables which GNU 'make' understands.  *Note Special
Targets::, *note Catalogue of Built-In Rules: Catalogue of Rules, and
*note Summary of Options: Options Summary, for other summaries.

   Here is a summary of the directives GNU 'make' recognizes:

'define VARIABLE'
'define VARIABLE ='
'define VARIABLE :='
'define VARIABLE ::='
'define VARIABLE +='
'define VARIABLE ?='
'endef'
     Define multi-line variables.
     *Note Multi-Line::.

'undefine VARIABLE'
     Undefining variables.
     *Note Undefine Directive::.

'ifdef VARIABLE'
'ifndef VARIABLE'
'ifeq (A,B)'
'ifeq "A" "B"'
'ifeq 'A' 'B''
'ifneq (A,B)'
'ifneq "A" "B"'
'ifneq 'A' 'B''
'else'
'endif'
     Conditionally evaluate part of the makefile.
     *Note Conditionals::.

'include FILE'
'-include FILE'
'sinclude FILE'
     Include another makefile.
     *Note Including Other Makefiles: Include.

'override VARIABLE-ASSIGNMENT'
     Define a variable, overriding any previous definition, even one
     from the command line.
     *Note The 'override' Directive: Override Directive.

'export'
     Tell 'make' to export all variables to child processes by default.
     *Note Communicating Variables to a Sub-'make': Variables/Recursion.

'export VARIABLE'
'export VARIABLE-ASSIGNMENT'
'unexport VARIABLE'
     Tell 'make' whether or not to export a particular variable to child
     processes.
     *Note Communicating Variables to a Sub-'make': Variables/Recursion.

'private VARIABLE-ASSIGNMENT'
     Do not allow this variable assignment to be inherited by
     prerequisites.
     *Note Suppressing Inheritance::.

'vpath PATTERN PATH'
     Specify a search path for files matching a '%' pattern.
     *Note The 'vpath' Directive: Selective Search.

'vpath PATTERN'
     Remove all search paths previously specified for PATTERN.

'vpath'
     Remove all search paths previously specified in any 'vpath'
     directive.

   Here is a summary of the built-in functions (*note Functions::):

'$(subst FROM,TO,TEXT)'
     Replace FROM with TO in TEXT.
     *Note Functions for String Substitution and Analysis: Text
     Functions.

'$(patsubst PATTERN,REPLACEMENT,TEXT)'
     Replace words matching PATTERN with REPLACEMENT in TEXT.
     *Note Functions for String Substitution and Analysis: Text
     Functions.

'$(strip STRING)'
     Remove excess whitespace characters from STRING.
     *Note Functions for String Substitution and Analysis: Text
     Functions.

'$(findstring FIND,TEXT)'
     Locate FIND in TEXT.
     *Note Functions for String Substitution and Analysis: Text
     Functions.

'$(filter PATTERN...,TEXT)'
     Select words in TEXT that match one of the PATTERN words.
     *Note Functions for String Substitution and Analysis: Text
     Functions.

'$(filter-out PATTERN...,TEXT)'
     Select words in TEXT that _do not_ match any of the PATTERN words.
     *Note Functions for String Substitution and Analysis: Text
     Functions.

'$(sort LIST)'
     Sort the words in LIST lexicographically, removing duplicates.
     *Note Functions for String Substitution and Analysis: Text
     Functions.

'$(word N,TEXT)'
     Extract the Nth word (one-origin) of TEXT.
     *Note Functions for String Substitution and Analysis: Text
     Functions.

'$(words TEXT)'
     Count the number of words in TEXT.
     *Note Functions for String Substitution and Analysis: Text
     Functions.

'$(wordlist S,E,TEXT)'
     Returns the list of words in TEXT from S to E.
     *Note Functions for String Substitution and Analysis: Text
     Functions.

'$(firstword NAMES...)'
     Extract the first word of NAMES.
     *Note Functions for String Substitution and Analysis: Text
     Functions.

'$(lastword NAMES...)'
     Extract the last word of NAMES.
     *Note Functions for String Substitution and Analysis: Text
     Functions.

'$(dir NAMES...)'
     Extract the directory part of each file name.
     *Note Functions for File Names: File Name Functions.

'$(notdir NAMES...)'
     Extract the non-directory part of each file name.
     *Note Functions for File Names: File Name Functions.

'$(suffix NAMES...)'
     Extract the suffix (the last '.' and following characters) of each
     file name.
     *Note Functions for File Names: File Name Functions.

'$(basename NAMES...)'
     Extract the base name (name without suffix) of each file name.
     *Note Functions for File Names: File Name Functions.

'$(addsuffix SUFFIX,NAMES...)'
     Append SUFFIX to each word in NAMES.
     *Note Functions for File Names: File Name Functions.

'$(addprefix PREFIX,NAMES...)'
     Prepend PREFIX to each word in NAMES.
     *Note Functions for File Names: File Name Functions.

'$(join LIST1,LIST2)'
     Join two parallel lists of words.
     *Note Functions for File Names: File Name Functions.

'$(wildcard PATTERN...)'
     Find file names matching a shell file name pattern (_not_ a '%'
     pattern).
     *Note The Function 'wildcard': Wildcard Function.

'$(realpath NAMES...)'
     For each file name in NAMES, expand to an absolute name that does
     not contain any '.', '..', nor symlinks.
     *Note Functions for File Names: File Name Functions.

'$(abspath NAMES...)'
     For each file name in NAMES, expand to an absolute name that does
     not contain any '.' or '..' components, but preserves symlinks.
     *Note Functions for File Names: File Name Functions.

'$(error TEXT...)'
     When this function is evaluated, 'make' generates a fatal error
     with the message TEXT.
     *Note Functions That Control Make: Make Control Functions.

'$(warning TEXT...)'
     When this function is evaluated, 'make' generates a warning with
     the message TEXT.
     *Note Functions That Control Make: Make Control Functions.

'$(shell COMMAND)'
     Execute a shell command and return its output.
     *Note The 'shell' Function: Shell Function.

'$(origin VARIABLE)'
     Return a string describing how the 'make' variable VARIABLE was
     defined.
     *Note The 'origin' Function: Origin Function.

'$(flavor VARIABLE)'
     Return a string describing the flavor of the 'make' variable
     VARIABLE.
     *Note The 'flavor' Function: Flavor Function.

'$(foreach VAR,WORDS,TEXT)'
     Evaluate TEXT with VAR bound to each word in WORDS, and concatenate
     the results.
     *Note The 'foreach' Function: Foreach Function.

'$(if CONDITION,THEN-PART[,ELSE-PART])'
     Evaluate the condition CONDITION; if it's non-empty substitute the
     expansion of the THEN-PART otherwise substitute the expansion of
     the ELSE-PART.
     *Note Functions for Conditionals: Conditional Functions.

'$(or CONDITION1[,CONDITION2[,CONDITION3...]])'
     Evaluate each condition CONDITIONN one at a time; substitute the
     first non-empty expansion.  If all expansions are empty, substitute
     the empty string.
     *Note Functions for Conditionals: Conditional Functions.

'$(and CONDITION1[,CONDITION2[,CONDITION3...]])'
     Evaluate each condition CONDITIONN one at a time; if any expansion
     results in the empty string substitute the empty string.  If all
     expansions result in a non-empty string, substitute the expansion
     of the last CONDITION.
     *Note Functions for Conditionals: Conditional Functions.

'$(call VAR,PARAM,...)'
     Evaluate the variable VAR replacing any references to '$(1)',
     '$(2)' with the first, second, etc. PARAM values.
     *Note The 'call' Function: Call Function.

'$(eval TEXT)'
     Evaluate TEXT then read the results as makefile commands.  Expands
     to the empty string.
     *Note The 'eval' Function: Eval Function.

'$(file OP FILENAME,TEXT)'
     Expand the arguments, then open the file FILENAME using mode OP and
     write TEXT to that file.
     *Note The 'file' Function: File Function.

'$(value VAR)'
     Evaluates to the contents of the variable VAR, with no expansion
     performed on it.
     *Note The 'value' Function: Value Function.

   Here is a summary of the automatic variables.  *Note Automatic
Variables::, for full information.

'$@'
     The file name of the target.

'$%'
     The target member name, when the target is an archive member.

'$<'
     The name of the first prerequisite.

'$?'
     The names of all the prerequisites that are newer than the target,
     with spaces between them.  For prerequisites which are archive
     members, only the named member is used (*note Archives::).

'$^'
'$+'
     The names of all the prerequisites, with spaces between them.  For
     prerequisites which are archive members, only the named member is
     used (*note Archives::).  The value of '$^' omits duplicate
     prerequisites, while '$+' retains them and preserves their order.

'$*'
     The stem with which an implicit rule matches (*note How Patterns
     Match: Pattern Match.).

'$(@D)'
'$(@F)'
     The directory part and the file-within-directory part of '$@'.

'$(*D)'
'$(*F)'
     The directory part and the file-within-directory part of '$*'.

'$(%D)'
'$(%F)'
     The directory part and the file-within-directory part of '$%'.

'$(<D)'
'$(<F)'
     The directory part and the file-within-directory part of '$<'.

'$(^D)'
'$(^F)'
     The directory part and the file-within-directory part of '$^'.

'$(+D)'
'$(+F)'
     The directory part and the file-within-directory part of '$+'.

'$(?D)'
'$(?F)'
     The directory part and the file-within-directory part of '$?'.

   These variables are used specially by GNU 'make':

'MAKEFILES'

     Makefiles to be read on every invocation of 'make'.
     *Note The Variable 'MAKEFILES': MAKEFILES Variable.

'VPATH'

     Directory search path for files not found in the current directory.
     *Note 'VPATH' Search Path for All Prerequisites: General Search.

'SHELL'

     The name of the system default command interpreter, usually
     '/bin/sh'.  You can set 'SHELL' in the makefile to change the shell
     used to run recipes.  *Note Recipe Execution: Execution.  The
     'SHELL' variable is handled specially when importing from and
     exporting to the environment.  *Note Choosing the Shell::.

'MAKESHELL'

     On MS-DOS only, the name of the command interpreter that is to be
     used by 'make'.  This value takes precedence over the value of
     'SHELL'.  *Note MAKESHELL variable: Execution.

'MAKE'

     The name with which 'make' was invoked.  Using this variable in
     recipes has special meaning.  *Note How the 'MAKE' Variable Works:
     MAKE Variable.

'MAKE_VERSION'

     The built-in variable 'MAKE_VERSION' expands to the version number
     of the GNU 'make' program.

'MAKE_HOST'

     The built-in variable 'MAKE_HOST' expands to a string representing
     the host that GNU 'make' was built to run on.

'MAKELEVEL'

     The number of levels of recursion (sub-'make's).
     *Note Variables/Recursion::.

'MAKEFLAGS'

     The flags given to 'make'.  You can set this in the environment or
     a makefile to set flags.
     *Note Communicating Options to a Sub-'make': Options/Recursion.

     It is _never_ appropriate to use 'MAKEFLAGS' directly in a recipe
     line: its contents may not be quoted correctly for use in the
     shell.  Always allow recursive 'make''s to obtain these values
     through the environment from its parent.

'GNUMAKEFLAGS'

     Other flags parsed by 'make'.  You can set this in the environment
     or a makefile to set 'make' command-line flags.  GNU 'make' never
     sets this variable itself.  This variable is only needed if you'd
     like to set GNU 'make'-specific flags in a POSIX-compliant
     makefile.  This variable will be seen by GNU 'make' and ignored by
     other 'make' implementations.  It's not needed if you only use GNU
     'make'; just use 'MAKEFLAGS' directly.  *Note Communicating Options
     to a Sub-'make': Options/Recursion.

'MAKECMDGOALS'

     The targets given to 'make' on the command line.  Setting this
     variable has no effect on the operation of 'make'.
     *Note Arguments to Specify the Goals: Goals.

'CURDIR'

     Set to the pathname of the current working directory (after all
     '-C' options are processed, if any).  Setting this variable has no
     effect on the operation of 'make'.
     *Note Recursive Use of 'make': Recursion.

'SUFFIXES'

     The default list of suffixes before 'make' reads any makefiles.

'.LIBPATTERNS'
     Defines the naming of the libraries 'make' searches for, and their
     order.
     *Note Directory Search for Link Libraries: Libraries/Search.


File: make.info,  Node: Error Messages,  Next: Complex Makefile,  Prev: Quick Reference,  Up: Top

Appendix B Errors Generated by Make
***********************************

Here is a list of the more common errors you might see generated by
'make', and some information about what they mean and how to fix them.

   Sometimes 'make' errors are not fatal, especially in the presence of
a '-' prefix on a recipe line, or the '-k' command line option.  Errors
that are fatal are prefixed with the string '***'.

   Error messages are all either prefixed with the name of the program
(usually 'make'), or, if the error is found in a makefile, the name of
the file and line number containing the problem.

   In the table below, these common prefixes are left off.

'[FOO] Error NN'
'[FOO] SIGNAL DESCRIPTION'
     These errors are not really 'make' errors at all.  They mean that a
     program that 'make' invoked as part of a recipe returned a non-0
     error code ('Error NN'), which 'make' interprets as failure, or it
     exited in some other abnormal fashion (with a signal of some type).
     *Note Errors in Recipes: Errors.

     If no '***' is attached to the message, then the sub-process failed
     but the rule in the makefile was prefixed with the '-' special
     character, so 'make' ignored the error.

'missing separator. Stop.'
'missing separator (did you mean TAB instead of 8 spaces?). Stop.'
     This means that 'make' could not understand much of anything about
     the makefile line it just read.  GNU 'make' looks for various
     separators (':', '=', recipe prefix characters, etc.)  to indicate
     what kind of line it's parsing.  This message means it couldn't
     find a valid one.

     One of the most common reasons for this message is that you (or
     perhaps your oh-so-helpful editor, as is the case with many
     MS-Windows editors) have attempted to indent your recipe lines with
     spaces instead of a tab character.  In this case, 'make' will use
     the second form of the error above.  Remember that every line in
     the recipe must begin with a tab character (unless you set
     '.RECIPEPREFIX'; *note Special Variables::).  Eight spaces do not
     count.  *Note Rule Syntax::.

'recipe commences before first target. Stop.'
'missing rule before recipe. Stop.'
     This means the first thing in the makefile seems to be part of a
     recipe: it begins with a recipe prefix character and doesn't appear
     to be a legal 'make' directive (such as a variable assignment).
     Recipes must always be associated with a target.

     The second form is generated if the line has a semicolon as the
     first non-whitespace character; 'make' interprets this to mean you
     left out the "target: prerequisite" section of a rule.  *Note Rule
     Syntax::.

'No rule to make target `XXX'.'
'No rule to make target `XXX', needed by `YYY'.'
     This means that 'make' decided it needed to build a target, but
     then couldn't find any instructions in the makefile on how to do
     that, either explicit or implicit (including in the default rules
     database).

     If you want that file to be built, you will need to add a rule to
     your makefile describing how that target can be built.  Other
     possible sources of this problem are typos in the makefile (if that
     file name is wrong) or a corrupted source tree (if that file is not
     supposed to be built, but rather only a prerequisite).

'No targets specified and no makefile found. Stop.'
'No targets. Stop.'
     The former means that you didn't provide any targets to be built on
     the command line, and 'make' couldn't find any makefiles to read
     in.  The latter means that some makefile was found, but it didn't
     contain any default goal and none was given on the command line.
     GNU 'make' has nothing to do in these situations.  *Note Arguments
     to Specify the Makefile: Makefile Arguments.

'Makefile `XXX' was not found.'
'Included makefile `XXX' was not found.'
     A makefile specified on the command line (first form) or included
     (second form) was not found.

'warning: overriding recipe for target `XXX''
'warning: ignoring old recipe for target `XXX''
     GNU 'make' allows only one recipe to be specified per target
     (except for double-colon rules).  If you give a recipe for a target
     which already has been defined to have one, this warning is issued
     and the second recipe will overwrite the first.  *Note Multiple
     Rules for One Target: Multiple Rules.

'Circular XXX <- YYY dependency dropped.'
     This means that 'make' detected a loop in the dependency graph:
     after tracing the prerequisite YYY of target XXX, and its
     prerequisites, etc., one of them depended on XXX again.

'Recursive variable `XXX' references itself (eventually). Stop.'
     This means you've defined a normal (recursive) 'make' variable XXX
     that, when it's expanded, will refer to itself (XXX).  This is not
     allowed; either use simply-expanded variables (':=' or '::=') or
     use the append operator ('+=').  *Note How to Use Variables: Using
     Variables.

'Unterminated variable reference. Stop.'
     This means you forgot to provide the proper closing parenthesis or
     brace in your variable or function reference.

'insufficient arguments to function `XXX'. Stop.'
     This means you haven't provided the requisite number of arguments
     for this function.  See the documentation of the function for a
     description of its arguments.  *Note Functions for Transforming
     Text: Functions.

'missing target pattern. Stop.'
'multiple target patterns. Stop.'
'target pattern contains no `%'. Stop.'
'mixed implicit and static pattern rules. Stop.'
     These are generated for malformed static pattern rules.  The first
     means there's no pattern in the target section of the rule; the
     second means there are multiple patterns in the target section; the
     third means the target doesn't contain a pattern character ('%');
     and the fourth means that all three parts of the static pattern
     rule contain pattern characters ('%')-only the first two parts
     should.  If you see these errors and you aren't trying to create a
     static pattern rule, check the value of any variables in your
     target and prerequisite lists to be sure they do not contain
     colons.  *Note Syntax of Static Pattern Rules: Static Usage.

'warning: -jN forced in submake: disabling jobserver mode.'
     This warning and the next are generated if 'make' detects error
     conditions related to parallel processing on systems where
     sub-'make's can communicate (*note Communicating Options to a
     Sub-'make': Options/Recursion.).  This warning is generated if a
     recursive invocation of a 'make' process is forced to have '-jN' in
     its argument list (where N is greater than one).  This could
     happen, for example, if you set the 'MAKE' environment variable to
     'make -j2'.  In this case, the sub-'make' doesn't communicate with
     other 'make' processes and will simply pretend it has two jobs of
     its own.

'warning: jobserver unavailable: using -j1. Add `+' to parent make rule.'
     In order for 'make' processes to communicate, the parent will pass
     information to the child.  Since this could result in problems if
     the child process isn't actually a 'make', the parent will only do
     this if it thinks the child is a 'make'.  The parent uses the
     normal algorithms to determine this (*note How the 'MAKE' Variable
     Works: MAKE Variable.).  If the makefile is constructed such that
     the parent doesn't know the child is a 'make' process, then the
     child will receive only part of the information necessary.  In this
     case, the child will generate this warning message and proceed with
     its build in a sequential manner.


File: make.info,  Node: Complex Makefile,  Next: GNU Free Documentation License,  Prev: Error Messages,  Up: Top

Appendix C Complex Makefile Example
***********************************

Here is the makefile for the GNU 'tar' program.  This is a moderately
complex makefile.  The first line uses a '#!' setting to allow the
makefile to be executed directly.

   Because it is the first target, the default goal is 'all'.  An
interesting feature of this makefile is that 'testpad.h' is a source
file automatically created by the 'testpad' program, itself compiled
from 'testpad.c'.

   If you type 'make' or 'make all', then 'make' creates the 'tar'
executable, the 'rmt' daemon that provides remote tape access, and the
'tar.info' Info file.

   If you type 'make install', then 'make' not only creates 'tar',
'rmt', and 'tar.info', but also installs them.

   If you type 'make clean', then 'make' removes the '.o' files, and the
'tar', 'rmt', 'testpad', 'testpad.h', and 'core' files.

   If you type 'make distclean', then 'make' not only removes the same
files as does 'make clean' but also the 'TAGS', 'Makefile', and
'config.status' files.  (Although it is not evident, this makefile (and
'config.status') is generated by the user with the 'configure' program,
which is provided in the 'tar' distribution, but is not shown here.)

   If you type 'make realclean', then 'make' removes the same files as
does 'make distclean' and also removes the Info files generated from
'tar.texinfo'.

   In addition, there are targets 'shar' and 'dist' that create
distribution kits.

     #!/usr/bin/make -f
     # Generated automatically from Makefile.in by configure.
     # Un*x Makefile for GNU tar program.
     # Copyright (C) 1991 Free Software Foundation, Inc.

     # This program is free software; you can redistribute
     # it and/or modify it under the terms of the GNU
     # General Public License ...
     ...
     ...

     SHELL = /bin/sh

     #### Start of system configuration section. ####

     srcdir = .

     # If you use gcc, you should either run the
     # fixincludes script that comes with it or else use
     # gcc with the -traditional option.  Otherwise ioctl
     # calls will be compiled incorrectly on some systems.
     CC = gcc -O
     YACC = bison -y
     INSTALL = /usr/local/bin/install -c
     INSTALLDATA = /usr/local/bin/install -c -m 644

     # Things you might add to DEFS:
     # -DSTDC_HEADERS        If you have ANSI C headers and
     #                       libraries.
     # -DPOSIX               If you have POSIX.1 headers and
     #                       libraries.
     # -DBSD42               If you have sys/dir.h (unless
     #                       you use -DPOSIX), sys/file.h,
     #                       and st_blocks in `struct stat'.
     # -DUSG                 If you have System V/ANSI C
     #                       string and memory functions
     #                       and headers, sys/sysmacros.h,
     #                       fcntl.h, getcwd, no valloc,
     #                       and ndir.h (unless
     #                       you use -DDIRENT).
     # -DNO_MEMORY_H         If USG or STDC_HEADERS but do not
     #                       include memory.h.
     # -DDIRENT              If USG and you have dirent.h
     #                       instead of ndir.h.
     # -DSIGTYPE=int         If your signal handlers
     #                       return int, not void.
     # -DNO_MTIO             If you lack sys/mtio.h
     #                       (magtape ioctls).
     # -DNO_REMOTE           If you do not have a remote shell
     #                       or rexec.
     # -DUSE_REXEC           To use rexec for remote tape
     #                       operations instead of
     #                       forking rsh or remsh.
     # -DVPRINTF_MISSING     If you lack vprintf function
     #                       (but have _doprnt).
     # -DDOPRNT_MISSING      If you lack _doprnt function.
     #                       Also need to define
     #                       -DVPRINTF_MISSING.
     # -DFTIME_MISSING       If you lack ftime system call.
     # -DSTRSTR_MISSING      If you lack strstr function.
     # -DVALLOC_MISSING      If you lack valloc function.
     # -DMKDIR_MISSING       If you lack mkdir and
     #                       rmdir system calls.
     # -DRENAME_MISSING      If you lack rename system call.
     # -DFTRUNCATE_MISSING   If you lack ftruncate
     #                       system call.
     # -DV7                  On Version 7 Unix (not
     #                       tested in a long time).
     # -DEMUL_OPEN3          If you lack a 3-argument version
     #                       of open, and want to emulate it
     #                       with system calls you do have.
     # -DNO_OPEN3            If you lack the 3-argument open
     #                       and want to disable the tar -k
     #                       option instead of emulating open.
     # -DXENIX               If you have sys/inode.h
     #                       and need it 94 to be included.

     DEFS =  -DSIGTYPE=int -DDIRENT -DSTRSTR_MISSING \
             -DVPRINTF_MISSING -DBSD42
     # Set this to rtapelib.o unless you defined NO_REMOTE,
     # in which case make it empty.
     RTAPELIB = rtapelib.o
     LIBS =
     DEF_AR_FILE = /dev/rmt8
     DEFBLOCKING = 20

     CDEBUG = -g
     CFLAGS = $(CDEBUG) -I. -I$(srcdir) $(DEFS) \
             -DDEF_AR_FILE=\"$(DEF_AR_FILE)\" \
             -DDEFBLOCKING=$(DEFBLOCKING)
     LDFLAGS = -g

     prefix = /usr/local
     # Prefix for each installed program,
     # normally empty or `g'.
     binprefix =

     # The directory to install tar in.
     bindir = $(prefix)/bin

     # The directory to install the info files in.
     infodir = $(prefix)/info

     #### End of system configuration section. ####

     SRCS_C  = tar.c create.c extract.c buffer.c   \
               getoldopt.c update.c gnu.c mangle.c \
               version.c list.c names.c diffarch.c \
               port.c wildmat.c getopt.c getopt1.c \
               regex.c
     SRCS_Y  = getdate.y
     SRCS    = $(SRCS_C) $(SRCS_Y)
     OBJS    = $(SRCS_C:.c=.o) $(SRCS_Y:.y=.o) $(RTAPELIB)
     AUX =   README COPYING ChangeLog Makefile.in  \
             makefile.pc configure configure.in \
             tar.texinfo tar.info* texinfo.tex \
             tar.h port.h open3.h getopt.h regex.h \
             rmt.h rmt.c rtapelib.c alloca.c \
             msd_dir.h msd_dir.c tcexparg.c \
             level-0 level-1 backup-specs testpad.c

     .PHONY: all
     all:    tar rmt tar.info

     tar:    $(OBJS)
             $(CC) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)

     rmt:    rmt.c
             $(CC) $(CFLAGS) $(LDFLAGS) -o $@ rmt.c

     tar.info: tar.texinfo
             makeinfo tar.texinfo

     .PHONY: install
     install: all
             $(INSTALL) tar $(bindir)/$(binprefix)tar
             -test ! -f rmt || $(INSTALL) rmt /etc/rmt
             $(INSTALLDATA) $(srcdir)/tar.info* $(infodir)

     $(OBJS): tar.h port.h testpad.h
     regex.o buffer.o tar.o: regex.h
     # getdate.y has 8 shift/reduce conflicts.

     testpad.h: testpad
             ./testpad

     testpad: testpad.o
             $(CC) -o $@ testpad.o

     TAGS:   $(SRCS)
             etags $(SRCS)

     .PHONY: clean
     clean:
             rm -f *.o tar rmt testpad testpad.h core

     .PHONY: distclean
     distclean: clean
             rm -f TAGS Makefile config.status

     .PHONY: realclean
     realclean: distclean
             rm -f tar.info*

     .PHONY: shar
     shar: $(SRCS) $(AUX)
             shar $(SRCS) $(AUX) | compress \
               > tar-`sed -e '/version_string/!d' \
                          -e 's/[^0-9.]*\([0-9.]*\).*/\1/' \
                          -e q
                          version.c`.shar.Z

     .PHONY: dist
     dist: $(SRCS) $(AUX)
             echo tar-`sed \
                  -e '/version_string/!d' \
                  -e 's/[^0-9.]*\([0-9.]*\).*/\1/' \
                  -e q
                  version.c` > .fname
             -rm -rf `cat .fname`
             mkdir `cat .fname`
             ln $(SRCS) $(AUX) `cat .fname`
             tar chZf `cat .fname`.tar.Z `cat .fname`
             -rm -rf `cat .fname` .fname

     tar.zoo: $(SRCS) $(AUX)
             -rm -rf tmp.dir
             -mkdir tmp.dir
             -rm tar.zoo
             for X in $(SRCS) $(AUX) ; do \
                 echo $$X ; \
                 sed 's/$$/^M/' $$X \
                 > tmp.dir/$$X ; done
             cd tmp.dir ; zoo aM ../tar.zoo *
             -rm -rf tmp.dir


File: make.info,  Node: GNU Free Documentation License,  Next: Concept Index,  Prev: Complex Makefile,  Up: Top

C.1 GNU Free Documentation License
==================================

                     Version 1.3, 3 November 2008

     Copyright (C) 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc.
     <http://fsf.org/>

     Everyone is permitted to copy and distribute verbatim copies
     of this license document, but changing it is not allowed.

  0. PREAMBLE

     The purpose of this License is to make a manual, textbook, or other
     functional and useful document "free" in the sense of freedom: to
     assure everyone the effective freedom to copy and redistribute it,
     with or without modifying it, either commercially or
     noncommercially.  Secondarily, this License preserves for the
     author and publisher a way to get credit for their work, while not
     being considered responsible for modifications made by others.

     This License is a kind of "copyleft", which means that derivative
     works of the document must themselves be free in the same sense.
     It complements the GNU General Public License, which is a copyleft
     license designed for free software.

     We have designed this License in order to use it for manuals for
     free software, because free software needs free documentation: a
     free program should come with manuals providing the same freedoms
     that the software does.  But this License is not limited to
     software manuals; it can be used for any textual work, regardless
     of subject matter or whether it is published as a printed book.  We
     recommend this License principally for works whose purpose is
     instruction or reference.

  1. APPLICABILITY AND DEFINITIONS

     This License applies to any manual or other work, in any medium,
     that contains a notice placed by the copyright holder saying it can
     be distributed under the terms of this License.  Such a notice
     grants a world-wide, royalty-free license, unlimited in duration,
     to use that work under the conditions stated herein.  The
     "Document", below, refers to any such manual or work.  Any member
     of the public is a licensee, and is addressed as "you".  You accept
     the license if you copy, modify or distribute the work in a way
     requiring permission under copyright law.

     A "Modified Version" of the Document means any work containing the
     Document or a portion of it, either copied verbatim, or with
     modifications and/or translated into another language.

     A "Secondary Section" is a named appendix or a front-matter section
     of the Document that deals exclusively with the relationship of the
     publishers or authors of the Document to the Document's overall
     subject (or to related matters) and contains nothing that could
     fall directly within that overall subject.  (Thus, if the Document
     is in part a textbook of mathematics, a Secondary Section may not
     explain any mathematics.)  The relationship could be a matter of
     historical connection with the subject or with related matters, or
     of legal, commercial, philosophical, ethical or political position
     regarding them.

     The "Invariant Sections" are certain Secondary Sections whose
     titles are designated, as being those of Invariant Sections, in the
     notice that says that the Document is released under this License.
     If a section does not fit the above definition of Secondary then it
     is not allowed to be designated as Invariant.  The Document may
     contain zero Invariant Sections.  If the Document does not identify
     any Invariant Sections then there are none.

     The "Cover Texts" are certain short passages of text that are
     listed, as Front-Cover Texts or Back-Cover Texts, in the notice
     that says that the Document is released under this License.  A
     Front-Cover Text may be at most 5 words, and a Back-Cover Text may
     be at most 25 words.

     A "Transparent" copy of the Document means a machine-readable copy,
     represented in a format whose specification is available to the
     general public, that is suitable for revising the document
     straightforwardly with generic text editors or (for images composed
     of pixels) generic paint programs or (for drawings) some widely
     available drawing editor, and that is suitable for input to text
     formatters or for automatic translation to a variety of formats
     suitable for input to text formatters.  A copy made in an otherwise
     Transparent file format whose markup, or absence of markup, has
     been arranged to thwart or discourage subsequent modification by
     readers is not Transparent.  An image format is not Transparent if
     used for any substantial amount of text.  A copy that is not
     "Transparent" is called "Opaque".

     Examples of suitable formats for Transparent copies include plain
     ASCII without markup, Texinfo input format, LaTeX input format,
     SGML or XML using a publicly available DTD, and standard-conforming
     simple HTML, PostScript or PDF designed for human modification.
     Examples of transparent image formats include PNG, XCF and JPG.
     Opaque formats include proprietary formats that can be read and
     edited only by proprietary word processors, SGML or XML for which
     the DTD and/or processing tools are not generally available, and
     the machine-generated HTML, PostScript or PDF produced by some word
     processors for output purposes only.

     The "Title Page" means, for a printed book, the title page itself,
     plus such following pages as are needed to hold, legibly, the
     material this License requires to appear in the title page.  For
     works in formats which do not have any title page as such, "Title
     Page" means the text near the most prominent appearance of the
     work's title, preceding the beginning of the body of the text.

     The "publisher" means any person or entity that distributes copies
     of the Document to the public.

     A section "Entitled XYZ" means a named subunit of the Document
     whose title either is precisely XYZ or contains XYZ in parentheses
     following text that translates XYZ in another language.  (Here XYZ
     stands for a specific section name mentioned below, such as
     "Acknowledgements", "Dedications", "Endorsements", or "History".)
     To "Preserve the Title" of such a section when you modify the
     Document means that it remains a section "Entitled XYZ" according
     to this definition.

     The Document may include Warranty Disclaimers next to the notice
     which states that this License applies to the Document.  These
     Warranty Disclaimers are considered to be included by reference in
     this License, but only as regards disclaiming warranties: any other
     implication that these Warranty Disclaimers may have is void and
     has no effect on the meaning of this License.

  2. VERBATIM COPYING

     You may copy and distribute the Document in any medium, either
     commercially or noncommercially, provided that this License, the
     copyright notices, and the license notice saying this License
     applies to the Document are reproduced in all copies, and that you
     add no other conditions whatsoever to those of this License.  You
     may not use technical measures to obstruct or control the reading
     or further copying of the copies you make or distribute.  However,
     you may accept compensation in exchange for copies.  If you
     distribute a large enough number of copies you must also follow the
     conditions in section 3.

     You may also lend copies, under the same conditions stated above,
     and you may publicly display copies.

  3. COPYING IN QUANTITY

     If you publish printed copies (or copies in media that commonly
     have printed covers) of the Document, numbering more than 100, and
     the Document's license notice requires Cover Texts, you must
     enclose the copies in covers that carry, clearly and legibly, all
     these Cover Texts: Front-Cover Texts on the front cover, and
     Back-Cover Texts on the back cover.  Both covers must also clearly
     and legibly identify you as the publisher of these copies.  The
     front cover must present the full title with all words of the title
     equally prominent and visible.  You may add other material on the
     covers in addition.  Copying with changes limited to the covers, as
     long as they preserve the title of the Document and satisfy these
     conditions, can be treated as verbatim copying in other respects.

     If the required texts for either cover are too voluminous to fit
     legibly, you should put the first ones listed (as many as fit
     reasonably) on the actual cover, and continue the rest onto
     adjacent pages.

     If you publish or distribute Opaque copies of the Document
     numbering more than 100, you must either include a machine-readable
     Transparent copy along with each Opaque copy, or state in or with
     each Opaque copy a computer-network location from which the general
     network-using public has access to download using public-standard
     network protocols a complete Transparent copy of the Document, free
     of added material.  If you use the latter option, you must take
     reasonably prudent steps, when you begin distribution of Opaque
     copies in quantity, to ensure that this Transparent copy will
     remain thus accessible at the stated location until at least one
     year after the last time you distribute an Opaque copy (directly or
     through your agents or retailers) of that edition to the public.

     It is requested, but not required, that you contact the authors of
     the Document well before redistributing any large number of copies,
     to give them a chance to provide you with an updated version of the
     Document.

  4. MODIFICATIONS

     You may copy and distribute a Modified Version of the Document
     under the conditions of sections 2 and 3 above, provided that you
     release the Modified Version under precisely this License, with the
     Modified Version filling the role of the Document, thus licensing
     distribution and modification of the Modified Version to whoever
     possesses a copy of it.  In addition, you must do these things in
     the Modified Version:

       A. Use in the Title Page (and on the covers, if any) a title
          distinct from that of the Document, and from those of previous
          versions (which should, if there were any, be listed in the
          History section of the Document).  You may use the same title
          as a previous version if the original publisher of that
          version gives permission.

       B. List on the Title Page, as authors, one or more persons or
          entities responsible for authorship of the modifications in
          the Modified Version, together with at least five of the
          principal authors of the Document (all of its principal
          authors, if it has fewer than five), unless they release you
          from this requirement.

       C. State on the Title page the name of the publisher of the
          Modified Version, as the publisher.

       D. Preserve all the copyright notices of the Document.

       E. Add an appropriate copyright notice for your modifications
          adjacent to the other copyright notices.

       F. Include, immediately after the copyright notices, a license
          notice giving the public permission to use the Modified
          Version under the terms of this License, in the form shown in
          the Addendum below.

       G. Preserve in that license notice the full lists of Invariant
          Sections and required Cover Texts given in the Document's
          license notice.

       H. Include an unaltered copy of this License.

       I. Preserve the section Entitled "History", Preserve its Title,
          and add to it an item stating at least the title, year, new
          authors, and publisher of the Modified Version as given on the
          Title Page.  If there is no section Entitled "History" in the
          Document, create one stating the title, year, authors, and
          publisher of the Document as given on its Title Page, then add
          an item describing the Modified Version as stated in the
          previous sentence.

       J. Preserve the network location, if any, given in the Document
          for public access to a Transparent copy of the Document, and
          likewise the network locations given in the Document for
          previous versions it was based on.  These may be placed in the
          "History" section.  You may omit a network location for a work
          that was published at least four years before the Document
          itself, or if the original publisher of the version it refers
          to gives permission.

       K. For any section Entitled "Acknowledgements" or "Dedications",
          Preserve the Title of the section, and preserve in the section
          all the substance and tone of each of the contributor
          acknowledgements and/or dedications given therein.

       L. Preserve all the Invariant Sections of the Document, unaltered
          in their text and in their titles.  Section numbers or the
          equivalent are not considered part of the section titles.

       M. Delete any section Entitled "Endorsements".  Such a section
          may not be included in the Modified Version.

       N. Do not retitle any existing section to be Entitled
          "Endorsements" or to conflict in title with any Invariant
          Section.

       O. Preserve any Warranty Disclaimers.

     If the Modified Version includes new front-matter sections or
     appendices that qualify as Secondary Sections and contain no
     material copied from the Document, you may at your option designate
     some or all of these sections as invariant.  To do this, add their
     titles to the list of Invariant Sections in the Modified Version's
     license notice.  These titles must be distinct from any other
     section titles.

     You may add a section Entitled "Endorsements", provided it contains
     nothing but endorsements of your Modified Version by various
     parties--for example, statements of peer review or that the text
     has been approved by an organization as the authoritative
     definition of a standard.

     You may add a passage of up to five words as a Front-Cover Text,
     and a passage of up to 25 words as a Back-Cover Text, to the end of
     the list of Cover Texts in the Modified Version.  Only one passage
     of Front-Cover Text and one of Back-Cover Text may be added by (or
     through arrangements made by) any one entity.  If the Document
     already includes a cover text for the same cover, previously added
     by you or by arrangement made by the same entity you are acting on
     behalf of, you may not add another; but you may replace the old
     one, on explicit permission from the previous publisher that added
     the old one.

     The author(s) and publisher(s) of the Document do not by this
     License give permission to use their names for publicity for or to
     assert or imply endorsement of any Modified Version.

  5. COMBINING DOCUMENTS

     You may combine the Document with other documents released under
     this License, under the terms defined in section 4 above for
     modified versions, provided that you include in the combination all
     of the Invariant Sections of all of the original documents,
     unmodified, and list them all as Invariant Sections of your
     combined work in its license notice, and that you preserve all
     their Warranty Disclaimers.

     The combined work need only contain one copy of this License, and
     multiple identical Invariant Sections may be replaced with a single
     copy.  If there are multiple Invariant Sections with the same name
     but different contents, make the title of each such section unique
     by adding at the end of it, in parentheses, the name of the
     original author or publisher of that section if known, or else a
     unique number.  Make the same adjustment to the section titles in
     the list of Invariant Sections in the license notice of the
     combined work.

     In the combination, you must combine any sections Entitled
     "History" in the various original documents, forming one section
     Entitled "History"; likewise combine any sections Entitled
     "Acknowledgements", and any sections Entitled "Dedications".  You
     must delete all sections Entitled "Endorsements."

  6. COLLECTIONS OF DOCUMENTS

     You may make a collection consisting of the Document and other
     documents released under this License, and replace the individual
     copies of this License in the various documents with a single copy
     that is included in the collection, provided that you follow the
     rules of this License for verbatim copying of each of the documents
     in all other respects.

     You may extract a single document from such a collection, and
     distribute it individually under this License, provided you insert
     a copy of this License into the extracted document, and follow this
     License in all other respects regarding verbatim copying of that
     document.

  7. AGGREGATION WITH INDEPENDENT WORKS

     A compilation of the Document or its derivatives with other
     separate and independent documents or works, in or on a volume of a
     storage or distribution medium, is called an "aggregate" if the
     copyright resulting from the compilation is not used to limit the
     legal rights of the compilation's users beyond what the individual
     works permit.  When the Document is included in an aggregate, this
     License does not apply to the other works in the aggregate which
     are not themselves derivative works of the Document.

     If the Cover Text requirement of section 3 is applicable to these
     copies of the Document, then if the Document is less than one half
     of the entire aggregate, the Document's Cover Texts may be placed
     on covers that bracket the Document within the aggregate, or the
     electronic equivalent of covers if the Document is in electronic
     form.  Otherwise they must appear on printed covers that bracket
     the whole aggregate.

  8. TRANSLATION

     Translation is considered a kind of modification, so you may
     distribute translations of the Document under the terms of section
     4.  Replacing Invariant Sections with translations requires special
     permission from their copyright holders, but you may include
     translations of some or all Invariant Sections in addition to the
     original versions of these Invariant Sections.  You may include a
     translation of this License, and all the license notices in the
     Document, and any Warranty Disclaimers, provided that you also
     include the original English version of this License and the
     original versions of those notices and disclaimers.  In case of a
     disagreement between the translation and the original version of
     this License or a notice or disclaimer, the original version will
     prevail.

     If a section in the Document is Entitled "Acknowledgements",
     "Dedications", or "History", the requirement (section 4) to
     Preserve its Title (section 1) will typically require changing the
     actual title.

  9. TERMINATION

     You may not copy, modify, sublicense, or distribute the Document
     except as expressly provided under this License.  Any attempt
     otherwise to copy, modify, sublicense, or distribute it is void,
     and will automatically terminate your rights under this License.

     However, if you cease all violation of this License, then your
     license from a particular copyright holder is reinstated (a)
     provisionally, unless and until the copyright holder explicitly and
     finally terminates your license, and (b) permanently, if the
     copyright holder fails to notify you of the violation by some
     reasonable means prior to 60 days after the cessation.

     Moreover, your license from a particular copyright holder is
     reinstated permanently if the copyright holder notifies you of the
     violation by some reasonable means, this is the first time you have
     received notice of violation of this License (for any work) from
     that copyright holder, and you cure the violation prior to 30 days
     after your receipt of the notice.

     Termination of your rights under this section does not terminate
     the licenses of parties who have received copies or rights from you
     under this License.  If your rights have been terminated and not
     permanently reinstated, receipt of a copy of some or all of the
     same material does not give you any rights to use it.

  10. FUTURE REVISIONS OF THIS LICENSE

     The Free Software Foundation may publish new, revised versions of
     the GNU Free Documentation License from time to time.  Such new
     versions will be similar in spirit to the present version, but may
     differ in detail to address new problems or concerns.  See
     <http://www.gnu.org/copyleft/>.

     Each version of the License is given a distinguishing version
     number.  If the Document specifies that a particular numbered
     version of this License "or any later version" applies to it, you
     have the option of following the terms and conditions either of
     that specified version or of any later version that has been
     published (not as a draft) by the Free Software Foundation.  If the
     Document does not specify a version number of this License, you may
     choose any version ever published (not as a draft) by the Free
     Software Foundation.  If the Document specifies that a proxy can
     decide which future versions of this License can be used, that
     proxy's public statement of acceptance of a version permanently
     authorizes you to choose that version for the Document.

  11. RELICENSING

     "Massive Multiauthor Collaboration Site" (or "MMC Site") means any
     World Wide Web server that publishes copyrightable works and also
     provides prominent facilities for anybody to edit those works.  A
     public wiki that anybody can edit is an example of such a server.
     A "Massive Multiauthor Collaboration" (or "MMC") contained in the
     site means any set of copyrightable works thus published on the MMC
     site.

     "CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0
     license published by Creative Commons Corporation, a not-for-profit
     corporation with a principal place of business in San Francisco,
     California, as well as future copyleft versions of that license
     published by that same organization.

     "Incorporate" means to publish or republish a Document, in whole or
     in part, as part of another Document.

     An MMC is "eligible for relicensing" if it is licensed under this
     License, and if all works that were first published under this
     License somewhere other than this MMC, and subsequently
     incorporated in whole or in part into the MMC, (1) had no cover
     texts or invariant sections, and (2) were thus incorporated prior
     to November 1, 2008.

     The operator of an MMC Site may republish an MMC contained in the
     site under CC-BY-SA on the same site at any time before August 1,
     2009, provided the MMC is eligible for relicensing.

ADDENDUM: How to use this License for your documents
====================================================

To use this License in a document you have written, include a copy of
the License in the document and put the following copyright and license
notices just after the title page:

       Copyright (C)  YEAR  YOUR NAME.
       Permission is granted to copy, distribute and/or modify this document
       under the terms of the GNU Free Documentation License, Version 1.3
       or any later version published by the Free Software Foundation;
       with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
       Texts.  A copy of the license is included in the section entitled ``GNU
       Free Documentation License''.

   If you have Invariant Sections, Front-Cover Texts and Back-Cover
Texts, replace the "with...Texts." line with this:

         with the Invariant Sections being LIST THEIR TITLES, with
         the Front-Cover Texts being LIST, and with the Back-Cover Texts
         being LIST.

   If you have Invariant Sections without Cover Texts, or some other
combination of the three, merge those two alternatives to suit the
situation.

   If your document contains nontrivial examples of program code, we
recommend releasing these examples in parallel under your choice of free
software license, such as the GNU General Public License, to permit
their use in free software.


File: make.info,  Node: Concept Index,  Next: Name Index,  Prev: GNU Free Documentation License,  Up: Top

Index of Concepts
*****************

[index]
* Menu:

* !=:                                    Setting.             (line   6)
* !=, expansion:                         Reading Makefiles.   (line  33)
* '#' (comments), in makefile:           Makefile Contents.   (line  41)
* '#' (comments), in recipes:            Recipe Syntax.       (line  29)
* '#include':                            Automatic Prerequisites.
                                                              (line  16)
* '$', in function call:                 Syntax of Functions. (line   6)
* '$', in rules:                         Rule Syntax.         (line  33)
* '$', in variable name:                 Computed Names.      (line   6)
* '$', in variable reference:            Reference.           (line   6)
* '%', in pattern rules:                 Pattern Intro.       (line   9)
* '%', quoting in 'patsubst':            Text Functions.      (line  26)
* '%', quoting in static pattern:        Static Usage.        (line  37)
* '%', quoting in 'vpath':               Selective Search.    (line  39)
* '%', quoting with '\' (backslash):     Selective Search.    (line  39)
* '%', quoting with '\' (backslash) <1>: Static Usage.        (line  37)
* '%', quoting with '\' (backslash) <2>: Text Functions.      (line  26)
* '*' (wildcard character):              Wildcards.           (line   6)
* +, and 'define':                       Canned Recipes.      (line  49)
* +, and recipe execution:               Instead of Execution.
                                                              (line  67)
* +, and recipes:                        MAKE Variable.       (line  18)
* +=:                                    Appending.           (line   6)
* +=, expansion:                         Reading Makefiles.   (line  33)
* +=, expansion <1>:                     Reading Makefiles.   (line  33)
* ,v (RCS file extension):               Catalogue of Rules.  (line 163)
* '-' (in recipes):                      Errors.              (line  19)
* -, and 'define':                       Canned Recipes.      (line  49)
* '--always-make':                       Options Summary.     (line  15)
* '--assume-new':                        Instead of Execution.
                                                              (line  41)
* '--assume-new' <1>:                    Options Summary.     (line 284)
* '--assume-new', and recursion:         Options/Recursion.   (line  22)
* '--assume-old':                        Avoiding Compilation.
                                                              (line   6)
* '--assume-old' <1>:                    Options Summary.     (line 163)
* '--assume-old', and recursion:         Options/Recursion.   (line  22)
* '--check-symlink-times':               Options Summary.     (line 144)
* '--debug':                             Options Summary.     (line  43)
* '--directory':                         Recursion.           (line  20)
* '--directory' <1>:                     Options Summary.     (line  26)
* '--directory', and '--print-directory': -w Option.          (line  20)
* '--directory', and recursion:          Options/Recursion.   (line  22)
* '--dry-run':                           Echoing.             (line  18)
* '--dry-run' <1>:                       Instead of Execution.
                                                              (line  14)
* '--dry-run' <2>:                       Options Summary.     (line 154)
* '--environment-overrides':             Options Summary.     (line  85)
* '--eval':                              Options Summary.     (line  89)
* '--file':                              Makefile Names.      (line  23)
* '--file' <1>:                          Makefile Arguments.  (line   6)
* '--file' <2>:                          Options Summary.     (line  97)
* '--file', and recursion:               Options/Recursion.   (line  22)
* '--help':                              Options Summary.     (line 103)
* '--ignore-errors':                     Errors.              (line  30)
* '--ignore-errors' <1>:                 Options Summary.     (line 108)
* '--include-dir':                       Include.             (line  53)
* '--include-dir' <1>:                   Options Summary.     (line 113)
* '--jobs':                              Parallel.            (line   6)
* '--jobs' <1>:                          Options Summary.     (line 120)
* '--jobs', and recursion:               Options/Recursion.   (line  25)
* '--just-print':                        Echoing.             (line  18)
* '--just-print' <1>:                    Instead of Execution.
                                                              (line  14)
* '--just-print' <2>:                    Options Summary.     (line 153)
* '--keep-going':                        Errors.              (line  47)
* '--keep-going' <1>:                    Testing.             (line  16)
* '--keep-going' <2>:                    Options Summary.     (line 129)
* '--load-average':                      Parallel.            (line  35)
* '--load-average' <1>:                  Options Summary.     (line 136)
* '--makefile':                          Makefile Names.      (line  23)
* '--makefile' <1>:                      Makefile Arguments.  (line   6)
* '--makefile' <2>:                      Options Summary.     (line  98)
* '--max-load':                          Parallel.            (line  35)
* '--max-load' <1>:                      Options Summary.     (line 137)
* '--new-file':                          Instead of Execution.
                                                              (line  41)
* '--new-file' <1>:                      Options Summary.     (line 283)
* '--new-file', and recursion:           Options/Recursion.   (line  22)
* '--no-builtin-rules':                  Options Summary.     (line 209)
* '--no-builtin-variables':              Options Summary.     (line 222)
* '--no-keep-going':                     Options Summary.     (line 238)
* '--no-print-directory':                -w Option.           (line  20)
* '--no-print-directory' <1>:            Options Summary.     (line 275)
* '--old-file':                          Avoiding Compilation.
                                                              (line   6)
* '--old-file' <1>:                      Options Summary.     (line 162)
* '--old-file', and recursion:           Options/Recursion.   (line  22)
* '--output-sync':                       Parallel Output.     (line  11)
* '--output-sync' <1>:                   Options Summary.     (line 171)
* '--print-data-base':                   Options Summary.     (line 187)
* '--print-directory':                   Options Summary.     (line 267)
* '--print-directory', and '--directory': -w Option.          (line  20)
* '--print-directory', and recursion:    -w Option.           (line  20)
* '--print-directory', disabling:        -w Option.           (line  20)
* '--question':                          Instead of Execution.
                                                              (line  32)
* '--question' <1>:                      Options Summary.     (line 201)
* '--quiet':                             Echoing.             (line  24)
* '--quiet' <1>:                         Options Summary.     (line 232)
* '--recon':                             Echoing.             (line  18)
* '--recon' <1>:                         Instead of Execution.
                                                              (line  14)
* '--recon' <2>:                         Options Summary.     (line 155)
* '--silent':                            Echoing.             (line  24)
* '--silent' <1>:                        Options Summary.     (line 231)
* '--stop':                              Options Summary.     (line 239)
* '--touch':                             Instead of Execution.
                                                              (line  24)
* '--touch' <1>:                         Options Summary.     (line 247)
* '--touch', and recursion:              MAKE Variable.       (line  35)
* '--trace':                             Options Summary.     (line 254)
* '--version':                           Options Summary.     (line 262)
* '--warn-undefined-variables':          Options Summary.     (line 292)
* '--what-if':                           Instead of Execution.
                                                              (line  41)
* '--what-if' <1>:                       Options Summary.     (line 282)
* '-b':                                  Options Summary.     (line   9)
* '-B':                                  Options Summary.     (line  14)
* '-C':                                  Recursion.           (line  20)
* '-C' <1>:                              Options Summary.     (line  25)
* '-C', and '-w':                        -w Option.           (line  20)
* '-C', and recursion:                   Options/Recursion.   (line  22)
* '-d':                                  Options Summary.     (line  33)
* '-e':                                  Options Summary.     (line  84)
* '-e' (shell flag):                     Automatic Prerequisites.
                                                              (line  65)
* '-f':                                  Makefile Names.      (line  23)
* '-f' <1>:                              Makefile Arguments.  (line   6)
* '-f' <2>:                              Options Summary.     (line  96)
* '-f', and recursion:                   Options/Recursion.   (line  22)
* '-h':                                  Options Summary.     (line 102)
* '-I':                                  Include.             (line  53)
* '-i':                                  Errors.              (line  30)
* '-i' <1>:                              Options Summary.     (line 107)
* '-I' <1>:                              Options Summary.     (line 112)
* '-j':                                  Parallel.            (line   6)
* '-j' <1>:                              Options Summary.     (line 119)
* '-j', and archive update:              Archive Pitfalls.    (line   6)
* '-j', and recursion:                   Options/Recursion.   (line  25)
* '-k':                                  Errors.              (line  47)
* '-k' <1>:                              Testing.             (line  16)
* '-k' <2>:                              Options Summary.     (line 128)
* '-l':                                  Options Summary.     (line 135)
* '-L':                                  Options Summary.     (line 143)
* '-l' (library search):                 Libraries/Search.    (line   6)
* '-l' (load average):                   Parallel.            (line  35)
* '-m':                                  Options Summary.     (line  10)
* '-M' (to compiler):                    Automatic Prerequisites.
                                                              (line  18)
* '-MM' (to GNU compiler):               Automatic Prerequisites.
                                                              (line  67)
* '-n':                                  Echoing.             (line  18)
* '-n' <1>:                              Instead of Execution.
                                                              (line  14)
* '-n' <2>:                              Options Summary.     (line 152)
* '-O':                                  Parallel Output.     (line  11)
* '-o':                                  Avoiding Compilation.
                                                              (line   6)
* '-o' <1>:                              Options Summary.     (line 161)
* '-O' <1>:                              Options Summary.     (line 170)
* '-o', and recursion:                   Options/Recursion.   (line  22)
* '-p':                                  Options Summary.     (line 186)
* '-q':                                  Instead of Execution.
                                                              (line  32)
* '-q' <1>:                              Options Summary.     (line 200)
* '-r':                                  Options Summary.     (line 208)
* '-R':                                  Options Summary.     (line 221)
* '-s':                                  Echoing.             (line  24)
* '-s' <1>:                              Options Summary.     (line 230)
* '-S':                                  Options Summary.     (line 237)
* '-t':                                  Instead of Execution.
                                                              (line  24)
* '-t' <1>:                              Options Summary.     (line 246)
* '-t', and recursion:                   MAKE Variable.       (line  35)
* '-v':                                  Options Summary.     (line 261)
* '-W':                                  Instead of Execution.
                                                              (line  41)
* '-w':                                  Options Summary.     (line 266)
* '-W' <1>:                              Options Summary.     (line 281)
* '-w', and '-C':                        -w Option.           (line  20)
* '-W', and recursion:                   Options/Recursion.   (line  22)
* '-w', and recursion:                   -w Option.           (line  20)
* '-w', disabling:                       -w Option.           (line  20)
* '.a' (archives):                       Archive Suffix Rules.
                                                              (line   6)
* .c:                                    Catalogue of Rules.  (line  35)
* .C:                                    Catalogue of Rules.  (line  39)
* .cc:                                   Catalogue of Rules.  (line  39)
* .ch:                                   Catalogue of Rules.  (line 149)
* .cpp:                                  Catalogue of Rules.  (line  39)
* '.d':                                  Automatic Prerequisites.
                                                              (line  80)
* .def:                                  Catalogue of Rules.  (line  71)
* .dvi:                                  Catalogue of Rules.  (line 149)
* .f:                                    Catalogue of Rules.  (line  49)
* .F:                                    Catalogue of Rules.  (line  49)
* .info:                                 Catalogue of Rules.  (line 156)
* .l:                                    Catalogue of Rules.  (line 121)
* '.LIBPATTERNS', and link libraries:    Libraries/Search.    (line   6)
* .ln:                                   Catalogue of Rules.  (line 143)
* .mod:                                  Catalogue of Rules.  (line  71)
* .o:                                    Catalogue of Rules.  (line  35)
* .o <1>:                                Catalogue of Rules.  (line  83)
* '.ONESHELL', use of:                   One Shell.           (line   6)
* .p:                                    Catalogue of Rules.  (line  45)
* '.PRECIOUS' intermediate files:        Chained Rules.       (line  56)
* .r:                                    Catalogue of Rules.  (line  49)
* .s:                                    Catalogue of Rules.  (line  76)
* .S:                                    Catalogue of Rules.  (line  79)
* .sh:                                   Catalogue of Rules.  (line 178)
* '.SHELLFLAGS', value of:               Choosing the Shell.  (line   6)
* .sym:                                  Catalogue of Rules.  (line  71)
* .tex:                                  Catalogue of Rules.  (line 149)
* .texi:                                 Catalogue of Rules.  (line 156)
* .texinfo:                              Catalogue of Rules.  (line 156)
* .txinfo:                               Catalogue of Rules.  (line 156)
* .w:                                    Catalogue of Rules.  (line 149)
* .web:                                  Catalogue of Rules.  (line 149)
* .y:                                    Catalogue of Rules.  (line 117)
* '::' rules (double-colon):             Double-Colon.        (line   6)
* ::=:                                   Flavors.             (line  56)
* ::= <1>:                               Setting.             (line   6)
* :=:                                    Flavors.             (line  56)
* := <1>:                                Setting.             (line   6)
* =:                                     Flavors.             (line  10)
* = <1>:                                 Setting.             (line   6)
* =, expansion:                          Reading Makefiles.   (line  33)
* '?' (wildcard character):              Wildcards.           (line   6)
* ?=:                                    Flavors.             (line 135)
* ?= <1>:                                Setting.             (line   6)
* ?=, expansion:                         Reading Makefiles.   (line  33)
* '@' (in recipes):                      Echoing.             (line   6)
* @, and 'define':                       Canned Recipes.      (line  49)
* '[...]' (wildcard characters):         Wildcards.           (line   6)
* '\' (backslash), for continuation lines: Simple Makefile.   (line  41)
* '\' (backslash), in recipes:           Splitting Recipe Lines.
                                                              (line   6)
* '\' (backslash), to quote '%':         Selective Search.    (line  39)
* '\' (backslash), to quote '%' <1>:     Static Usage.        (line  37)
* '\' (backslash), to quote '%' <2>:     Text Functions.      (line  26)
* '__.SYMDEF':                           Archive Symbols.     (line   6)
* '~' (tilde):                           Wildcards.           (line  11)
* abspath:                               File Name Functions. (line 120)
* algorithm for directory search:        Search Algorithm.    (line   6)
* 'all' (standard target):               Goals.               (line  73)
* appending to variables:                Appending.           (line   6)
* ar:                                    Implicit Variables.  (line  40)
* archive:                               Archives.            (line   6)
* archive member targets:                Archive Members.     (line   6)
* archive symbol directory updating:     Archive Symbols.     (line   6)
* archive, and '-j':                     Archive Pitfalls.    (line   6)
* archive, and parallel execution:       Archive Pitfalls.    (line   6)
* archive, suffix rule for:              Archive Suffix Rules.
                                                              (line   6)
* Arg list too long:                     Options/Recursion.   (line  58)
* arguments of functions:                Syntax of Functions. (line   6)
* as:                                    Catalogue of Rules.  (line  76)
* as <1>:                                Implicit Variables.  (line  43)
* assembly, rule to compile:             Catalogue of Rules.  (line  76)
* automatic generation of prerequisites: Include.             (line  51)
* automatic generation of prerequisites <1>: Automatic Prerequisites.
                                                              (line   6)
* automatic variables:                   Automatic Variables. (line   6)
* automatic variables in prerequisites:  Automatic Variables. (line  17)
* backquotes:                            Shell Function.      (line   6)
* backslash ('\'), for continuation lines: Simple Makefile.   (line  41)
* backslash ('\'), in recipes:           Splitting Recipe Lines.
                                                              (line   6)
* backslash ('\'), to quote '%':         Selective Search.    (line  39)
* backslash ('\'), to quote '%' <1>:     Static Usage.        (line  37)
* backslash ('\'), to quote '%' <2>:     Text Functions.      (line  26)
* backslash ('\'), to quote newlines:    Splitting Lines.     (line   6)
* backslashes in pathnames and wildcard expansion: Wildcard Pitfall.
                                                              (line  31)
* basename:                              File Name Functions. (line  56)
* binary packages:                       Install Command Categories.
                                                              (line  80)
* broken pipe:                           Parallel Input.      (line  11)
* bugs, reporting:                       Bugs.                (line   6)
* built-in special targets:              Special Targets.     (line   6)
* C++, rule to compile:                  Catalogue of Rules.  (line  39)
* C, rule to compile:                    Catalogue of Rules.  (line  35)
* canned recipes:                        Canned Recipes.      (line   6)
* cc:                                    Catalogue of Rules.  (line  35)
* cc <1>:                                Implicit Variables.  (line  46)
* 'cd' (shell command):                  Execution.           (line  12)
* 'cd' (shell command) <1>:              MAKE Variable.       (line  16)
* chains of rules:                       Chained Rules.       (line   6)
* 'check' (standard target):             Goals.               (line 115)
* 'clean' (standard target):             Goals.               (line  76)
* 'clean' target:                        Simple Makefile.     (line  85)
* 'clean' target <1>:                    Cleanup.             (line  11)
* cleaning up:                           Cleanup.             (line   6)
* 'clobber' (standard target):           Goals.               (line  87)
* co:                                    Catalogue of Rules.  (line 163)
* co <1>:                                Implicit Variables.  (line  66)
* combining rules by prerequisite:       Combine By Prerequisite.
                                                              (line   6)
* command expansion:                     Shell Function.      (line   6)
* command line variable definitions, and recursion: Options/Recursion.
                                                              (line  17)
* command line variables:                Overriding.          (line   6)
* commands, sequences of:                Canned Recipes.      (line   6)
* comments, in makefile:                 Makefile Contents.   (line  41)
* comments, in recipes:                  Recipe Syntax.       (line  29)
* compatibility:                         Features.            (line   6)
* compatibility in exporting:            Variables/Recursion. (line 104)
* compilation, testing:                  Testing.             (line   6)
* computed variable name:                Computed Names.      (line   6)
* conditional expansion:                 Conditional Functions.
                                                              (line   6)
* conditional variable assignment:       Flavors.             (line 135)
* conditionals:                          Conditionals.        (line   6)
* continuation lines:                    Simple Makefile.     (line  41)
* controlling make:                      Make Control Functions.
                                                              (line   6)
* conventions for makefiles:             Makefile Conventions.
                                                              (line   6)
* convert guile types:                   Guile Types.         (line   6)
* ctangle:                               Catalogue of Rules.  (line 149)
* ctangle <1>:                           Implicit Variables.  (line 103)
* cweave:                                Catalogue of Rules.  (line 149)
* cweave <1>:                            Implicit Variables.  (line  97)
* data base of 'make' rules:             Options Summary.     (line 187)
* deducing recipes (implicit rules):     make Deduces.        (line   6)
* default directories for included makefiles: Include.        (line  53)
* default goal:                          How Make Works.      (line  11)
* default goal <1>:                      Rules.               (line  11)
* default makefile name:                 Makefile Names.      (line   6)
* default rules, last-resort:            Last Resort.         (line   6)
* define, expansion:                     Reading Makefiles.   (line  33)
* defining variables verbatim:           Multi-Line.          (line   6)
* deletion of target files:              Errors.              (line  64)
* deletion of target files <1>:          Interrupts.          (line   6)
* directive:                             Makefile Contents.   (line  28)
* directories, creating installation:    Directory Variables. (line  20)
* directories, printing them:            -w Option.           (line   6)
* directories, updating archive symbol:  Archive Symbols.     (line   6)
* directory part:                        File Name Functions. (line  16)
* directory search ('VPATH'):            Directory Search.    (line   6)
* directory search ('VPATH'), and implicit rules: Implicit/Search.
                                                              (line   6)
* directory search ('VPATH'), and link libraries: Libraries/Search.
                                                              (line   6)
* directory search ('VPATH'), and recipes: Recipes/Search.    (line   6)
* directory search algorithm:            Search Algorithm.    (line   6)
* directory search, traditional (GPATH): Search Algorithm.    (line  42)
* 'dist' (standard target):              Goals.               (line 107)
* 'distclean' (standard target):         Goals.               (line  85)
* dollar sign ('$'), in function call:   Syntax of Functions. (line   6)
* dollar sign ('$'), in rules:           Rule Syntax.         (line  33)
* dollar sign ('$'), in variable name:   Computed Names.      (line   6)
* dollar sign ('$'), in variable reference: Reference.        (line   6)
* DOS, choosing a shell in:              Choosing the Shell.  (line  38)
* double-colon rules:                    Double-Colon.        (line   6)
* duplicate words, removing:             Text Functions.      (line 155)
* E2BIG:                                 Options/Recursion.   (line  58)
* echoing of recipes:                    Echoing.             (line   6)
* editor:                                Introduction.        (line  22)
* Emacs ('M-x compile'):                 Errors.              (line  62)
* empty recipes:                         Empty Recipes.       (line   6)
* empty targets:                         Empty Targets.       (line   6)
* environment:                           Environment.         (line   6)
* environment, and recursion:            Variables/Recursion. (line   6)
* environment, 'SHELL' in:               Choosing the Shell.  (line  12)
* error, stopping on:                    Make Control Functions.
                                                              (line  11)
* errors (in recipes):                   Errors.              (line   6)
* errors with wildcards:                 Wildcard Pitfall.    (line   6)
* evaluating makefile syntax:            Eval Function.       (line   6)
* example of loaded objects:             Loaded Object Example.
                                                              (line   6)
* example using Guile:                   Guile Example.       (line   6)
* execution, in parallel:                Parallel.            (line   6)
* execution, instead of:                 Instead of Execution.
                                                              (line   6)
* execution, of recipes:                 Execution.           (line   6)
* exit status (errors):                  Errors.              (line   6)
* exit status of make:                   Running.             (line  18)
* expansion, secondary:                  Secondary Expansion. (line   6)
* explicit rule, definition of:          Makefile Contents.   (line  10)
* explicit rule, expansion:              Reading Makefiles.   (line  92)
* explicit rules, secondary expansion of: Secondary Expansion.
                                                              (line 104)
* exporting variables:                   Variables/Recursion. (line   6)
* extensions, Guile:                     Guile Integration.   (line   6)
* extensions, load directive:            load Directive.      (line   6)
* extensions, loading:                   Loading Objects.     (line   6)
* f77:                                   Catalogue of Rules.  (line  49)
* f77 <1>:                               Implicit Variables.  (line  57)
* FDL, GNU Free Documentation License:   GNU Free Documentation License.
                                                              (line   6)
* features of GNU 'make':                Features.            (line   6)
* features, missing:                     Missing.             (line   6)
* file name functions:                   File Name Functions. (line   6)
* file name of makefile:                 Makefile Names.      (line   6)
* file name of makefile, how to specify: Makefile Names.      (line  31)
* file name prefix, adding:              File Name Functions. (line  78)
* file name suffix:                      File Name Functions. (line  42)
* file name suffix, adding:              File Name Functions. (line  67)
* file name with wildcards:              Wildcards.           (line   6)
* file name, abspath of:                 File Name Functions. (line 120)
* file name, basename of:                File Name Functions. (line  56)
* file name, directory part:             File Name Functions. (line  16)
* file name, nondirectory part:          File Name Functions. (line  26)
* file name, realpath of:                File Name Functions. (line 113)
* file, writing to:                      File Function.       (line   6)
* files, assuming new:                   Instead of Execution.
                                                              (line  41)
* files, assuming old:                   Avoiding Compilation.
                                                              (line   6)
* files, avoiding recompilation of:      Avoiding Compilation.
                                                              (line   6)
* files, intermediate:                   Chained Rules.       (line  16)
* filtering out words:                   Text Functions.      (line 133)
* filtering words:                       Text Functions.      (line 115)
* finding strings:                       Text Functions.      (line 104)
* flags:                                 Options Summary.     (line   6)
* flags for compilers:                   Implicit Variables.  (line   6)
* flavor of variable:                    Flavor Function.     (line   6)
* flavors of variables:                  Flavors.             (line   6)
* 'FORCE':                               Force Targets.       (line   6)
* force targets:                         Force Targets.       (line   6)
* Fortran, rule to compile:              Catalogue of Rules.  (line  49)
* functions:                             Functions.           (line   6)
* functions, for controlling make:       Make Control Functions.
                                                              (line   6)
* functions, for file names:             File Name Functions. (line   6)
* functions, for text:                   Text Functions.      (line   6)
* functions, syntax of:                  Syntax of Functions. (line   6)
* functions, user defined:               Call Function.       (line   6)
* g++:                                   Catalogue of Rules.  (line  39)
* g++ <1>:                               Implicit Variables.  (line  49)
* gcc:                                   Catalogue of Rules.  (line  35)
* generating prerequisites automatically: Include.            (line  51)
* generating prerequisites automatically <1>: Automatic Prerequisites.
                                                              (line   6)
* get:                                   Catalogue of Rules.  (line 172)
* get <1>:                               Implicit Variables.  (line  69)
* globbing (wildcards):                  Wildcards.           (line   6)
* goal:                                  How Make Works.      (line  11)
* goal, default:                         How Make Works.      (line  11)
* goal, default <1>:                     Rules.               (line  11)
* goal, how to specify:                  Goals.               (line   6)
* Guile:                                 Guile Function.      (line   6)
* Guile <1>:                             Guile Integration.   (line   6)
* Guile example:                         Guile Example.       (line   6)
* guile, conversion of types:            Guile Types.         (line   6)
* home directory:                        Wildcards.           (line  11)
* IEEE Standard 1003.2:                  Overview.            (line  13)
* ifdef, expansion:                      Reading Makefiles.   (line  82)
* ifeq, expansion:                       Reading Makefiles.   (line  82)
* ifndef, expansion:                     Reading Makefiles.   (line  82)
* ifneq, expansion:                      Reading Makefiles.   (line  82)
* implicit rule:                         Implicit Rules.      (line   6)
* implicit rule, and directory search:   Implicit/Search.     (line   6)
* implicit rule, and 'VPATH':            Implicit/Search.     (line   6)
* implicit rule, definition of:          Makefile Contents.   (line  16)
* implicit rule, expansion:              Reading Makefiles.   (line  92)
* implicit rule, how to use:             Using Implicit.      (line   6)
* implicit rule, introduction to:        make Deduces.        (line   6)
* implicit rule, predefined:             Catalogue of Rules.  (line   6)
* implicit rule, search algorithm:       Implicit Rule Search.
                                                              (line   6)
* implicit rules, secondary expansion of: Secondary Expansion.
                                                              (line 144)
* included makefiles, default directories: Include.           (line  53)
* including ('MAKEFILES' variable):      MAKEFILES Variable.  (line   6)
* including ('MAKEFILE_LIST' variable):  Special Variables.   (line   8)
* including other makefiles:             Include.             (line   6)
* incompatibilities:                     Missing.             (line   6)
* Info, rule to format:                  Catalogue of Rules.  (line 156)
* inheritance, suppressing:              Suppressing Inheritance.
                                                              (line   6)
* input during parallel execution:       Parallel Input.      (line   6)
* 'install' (standard target):           Goals.               (line  93)
* installation directories, creating:    Directory Variables. (line  20)
* installations, staged:                 DESTDIR.             (line   6)
* interface for loaded objects:          Loaded Object API.   (line   6)
* intermediate files:                    Chained Rules.       (line  16)
* intermediate files, preserving:        Chained Rules.       (line  46)
* intermediate targets, explicit:        Special Targets.     (line  48)
* interrupt:                             Interrupts.          (line   6)
* job slots:                             Parallel.            (line   6)
* job slots, and recursion:              Options/Recursion.   (line  25)
* jobs, limiting based on load:          Parallel.            (line  35)
* joining lists of words:                File Name Functions. (line  89)
* killing (interruption):                Interrupts.          (line   6)
* last-resort default rules:             Last Resort.         (line   6)
* ld:                                    Catalogue of Rules.  (line  83)
* lex:                                   Catalogue of Rules.  (line 121)
* lex <1>:                               Implicit Variables.  (line  73)
* Lex, rule to run:                      Catalogue of Rules.  (line 121)
* libraries for linking, directory search: Libraries/Search.  (line   6)
* library archive, suffix rule for:      Archive Suffix Rules.
                                                              (line   6)
* limiting jobs based on load:           Parallel.            (line  35)
* link libraries, and directory search:  Libraries/Search.    (line   6)
* link libraries, patterns matching:     Libraries/Search.    (line   6)
* linking, predefined rule for:          Catalogue of Rules.  (line  83)
* lint:                                  Catalogue of Rules.  (line 143)
* lint <1>:                              Implicit Variables.  (line  80)
* 'lint', rule to run:                   Catalogue of Rules.  (line 143)
* list of all prerequisites:             Automatic Variables. (line  61)
* list of changed prerequisites:         Automatic Variables. (line  51)
* load average:                          Parallel.            (line  35)
* load directive:                        load Directive.      (line   6)
* loaded object API:                     Loaded Object API.   (line   6)
* loaded object example:                 Loaded Object Example.
                                                              (line   6)
* loaded object licensing:               Loaded Object API.   (line  31)
* loaded objects:                        Loading Objects.     (line   6)
* loaded objects, remaking of:           Remaking Loaded Objects.
                                                              (line   6)
* long lines, splitting:                 Splitting Lines.     (line   6)
* loops in variable expansion:           Flavors.             (line  44)
* 'lpr' (shell command):                 Wildcard Examples.   (line  21)
* 'lpr' (shell command) <1>:             Empty Targets.       (line  25)
* m2c:                                   Catalogue of Rules.  (line  71)
* m2c <1>:                               Implicit Variables.  (line  60)
* macro:                                 Using Variables.     (line  10)
* 'make depend':                         Automatic Prerequisites.
                                                              (line  37)
* make extensions:                       Extending make.      (line   6)
* make interface to guile:               Guile Interface.     (line   6)
* make procedures in guile:              Guile Interface.     (line   6)
* makefile:                              Introduction.        (line   7)
* makefile name:                         Makefile Names.      (line   6)
* makefile name, how to specify:         Makefile Names.      (line  31)
* makefile rule parts:                   Rule Introduction.   (line   6)
* makefile syntax, evaluating:           Eval Function.       (line   6)
* makefile, and 'MAKEFILES' variable:    MAKEFILES Variable.  (line   6)
* makefile, conventions for:             Makefile Conventions.
                                                              (line   6)
* makefile, how 'make' processes:        How Make Works.      (line   6)
* makefile, how to write:                Makefiles.           (line   6)
* makefile, including:                   Include.             (line   6)
* makefile, overriding:                  Overriding Makefiles.
                                                              (line   6)
* makefile, parsing:                     Reading Makefiles.   (line   6)
* makefile, remaking of:                 Remaking Makefiles.  (line   6)
* makefile, simple:                      Simple Makefile.     (line   6)
* makefiles, and 'MAKEFILE_LIST' variable: Special Variables. (line   8)
* makefiles, and special variables:      Special Variables.   (line   6)
* makeinfo:                              Catalogue of Rules.  (line 156)
* makeinfo <1>:                          Implicit Variables.  (line  84)
* match-anything rule:                   Match-Anything Rules.
                                                              (line   6)
* match-anything rule, used to override: Overriding Makefiles.
                                                              (line  12)
* missing features:                      Missing.             (line   6)
* mistakes with wildcards:               Wildcard Pitfall.    (line   6)
* modified variable reference:           Substitution Refs.   (line   6)
* Modula-2, rule to compile:             Catalogue of Rules.  (line  71)
* 'mostlyclean' (standard target):       Goals.               (line  79)
* multi-line variable definition:        Multi-Line.          (line   6)
* multiple rules for one target:         Multiple Rules.      (line   6)
* multiple rules for one target ('::'):  Double-Colon.        (line   6)
* multiple targets:                      Multiple Targets.    (line   6)
* multiple targets, in pattern rule:     Pattern Intro.       (line  53)
* name of makefile:                      Makefile Names.      (line   6)
* name of makefile, how to specify:      Makefile Names.      (line  31)
* nested variable reference:             Computed Names.      (line   6)
* newline, quoting, in makefile:         Simple Makefile.     (line  41)
* newline, quoting, in recipes:          Splitting Recipe Lines.
                                                              (line   6)
* nondirectory part:                     File Name Functions. (line  26)
* normal prerequisites:                  Prerequisite Types.  (line   6)
* 'obj':                                 Variables Simplify.  (line  20)
* 'OBJ':                                 Variables Simplify.  (line  20)
* 'objects':                             Variables Simplify.  (line  14)
* 'OBJECTS':                             Variables Simplify.  (line  20)
* objects, loaded:                       Loading Objects.     (line   6)
* 'objs':                                Variables Simplify.  (line  20)
* 'OBJS':                                Variables Simplify.  (line  20)
* old-fashioned suffix rules:            Suffix Rules.        (line   6)
* options:                               Options Summary.     (line   6)
* options, and recursion:                Options/Recursion.   (line   6)
* options, setting from environment:     Options/Recursion.   (line  81)
* options, setting in makefiles:         Options/Recursion.   (line  81)
* order of pattern rules:                Pattern Match.       (line  30)
* order-only prerequisites:              Prerequisite Types.  (line   6)
* origin of variable:                    Origin Function.     (line   6)
* output during parallel execution:      Parallel Output.     (line   6)
* output during parallel execution <1>:  Options Summary.     (line 171)
* overriding makefiles:                  Overriding Makefiles.
                                                              (line   6)
* overriding variables with arguments:   Overriding.          (line   6)
* overriding with 'override':            Override Directive.  (line   6)
* parallel execution:                    Parallel.            (line   6)
* parallel execution, and archive update: Archive Pitfalls.   (line   6)
* parallel execution, input during:      Parallel Input.      (line   6)
* parallel execution, output during:     Parallel Output.     (line   6)
* parallel execution, output during <1>: Options Summary.     (line 171)
* parallel execution, overriding:        Special Targets.     (line 142)
* parts of makefile rule:                Rule Introduction.   (line   6)
* Pascal, rule to compile:               Catalogue of Rules.  (line  45)
* pattern rule:                          Pattern Intro.       (line   6)
* pattern rule, expansion:               Reading Makefiles.   (line  92)
* pattern rules, order of:               Pattern Match.       (line  30)
* pattern rules, static (not implicit):  Static Pattern.      (line   6)
* pattern rules, static, syntax of:      Static Usage.        (line   6)
* pattern-specific variables:            Pattern-specific.    (line   6)
* pc:                                    Catalogue of Rules.  (line  45)
* pc <1>:                                Implicit Variables.  (line  63)
* phony targets:                         Phony Targets.       (line   6)
* phony targets and recipe execution:    Instead of Execution.
                                                              (line  75)
* pitfalls of wildcards:                 Wildcard Pitfall.    (line   6)
* plugin_is_GPL_compatible:              Loaded Object API.   (line  31)
* portability:                           Features.            (line   6)
* POSIX:                                 Overview.            (line  13)
* POSIX <1>:                             Options/Recursion.   (line  61)
* POSIX-conforming mode, setting:        Special Targets.     (line 157)
* post-installation commands:            Install Command Categories.
                                                              (line   6)
* pre-installation commands:             Install Command Categories.
                                                              (line   6)
* precious targets:                      Special Targets.     (line  32)
* predefined rules and variables, printing: Options Summary.  (line 187)
* prefix, adding:                        File Name Functions. (line  78)
* prerequisite:                          Rules.               (line   6)
* prerequisite pattern, implicit:        Pattern Intro.       (line  22)
* prerequisite pattern, static (not implicit): Static Usage.  (line  30)
* prerequisite types:                    Prerequisite Types.  (line   6)
* prerequisite, expansion:               Reading Makefiles.   (line  92)
* prerequisites:                         Rule Syntax.         (line  47)
* prerequisites, and automatic variables: Automatic Variables.
                                                              (line  17)
* prerequisites, automatic generation:   Include.             (line  51)
* prerequisites, automatic generation <1>: Automatic Prerequisites.
                                                              (line   6)
* prerequisites, introduction to:        Rule Introduction.   (line   8)
* prerequisites, list of all:            Automatic Variables. (line  61)
* prerequisites, list of changed:        Automatic Variables. (line  51)
* prerequisites, normal:                 Prerequisite Types.  (line   6)
* prerequisites, order-only:             Prerequisite Types.  (line   6)
* prerequisites, varying (static pattern): Static Pattern.    (line   6)
* preserving intermediate files:         Chained Rules.       (line  46)
* preserving with '.PRECIOUS':           Special Targets.     (line  32)
* preserving with '.PRECIOUS' <1>:       Chained Rules.       (line  56)
* preserving with '.SECONDARY':          Special Targets.     (line  54)
* 'print' (standard target):             Goals.               (line  98)
* 'print' target:                        Wildcard Examples.   (line  21)
* 'print' target <1>:                    Empty Targets.       (line  25)
* printing directories:                  -w Option.           (line   6)
* printing messages:                     Make Control Functions.
                                                              (line  43)
* printing of recipes:                   Echoing.             (line   6)
* printing user warnings:                Make Control Functions.
                                                              (line  35)
* problems and bugs, reporting:          Bugs.                (line   6)
* problems with wildcards:               Wildcard Pitfall.    (line   6)
* processing a makefile:                 How Make Works.      (line   6)
* question mode:                         Instead of Execution.
                                                              (line  32)
* quoting '%', in 'patsubst':            Text Functions.      (line  26)
* quoting '%', in static pattern:        Static Usage.        (line  37)
* quoting '%', in 'vpath':               Selective Search.    (line  39)
* quoting newline, in makefile:          Simple Makefile.     (line  41)
* quoting newline, in recipes:           Splitting Recipe Lines.
                                                              (line   6)
* Ratfor, rule to compile:               Catalogue of Rules.  (line  49)
* RCS, rule to extract from:             Catalogue of Rules.  (line 163)
* reading makefiles:                     Reading Makefiles.   (line   6)
* 'README':                              Makefile Names.      (line   9)
* 'realclean' (standard target):         Goals.               (line  86)
* realpath:                              File Name Functions. (line 113)
* recipe:                                Simple Makefile.     (line  74)
* recipe execution, single invocation:   Special Targets.     (line 150)
* recipe lines, single shell:            One Shell.           (line   6)
* recipe syntax:                         Recipe Syntax.       (line   6)
* recipe, execution:                     Execution.           (line   6)
* recipes:                               Rule Syntax.         (line  25)
* recipes <1>:                           Recipes.             (line   6)
* recipes setting shell variables:       Execution.           (line  12)
* recipes, and directory search:         Recipes/Search.      (line   6)
* recipes, backslash ('\') in:           Splitting Recipe Lines.
                                                              (line   6)
* recipes, canned:                       Canned Recipes.      (line   6)
* recipes, comments in:                  Recipe Syntax.       (line  29)
* recipes, echoing:                      Echoing.             (line   6)
* recipes, empty:                        Empty Recipes.       (line   6)
* recipes, errors in:                    Errors.              (line   6)
* recipes, execution in parallel:        Parallel.            (line   6)
* recipes, how to write:                 Recipes.             (line   6)
* recipes, instead of executing:         Instead of Execution.
                                                              (line   6)
* recipes, introduction to:              Rule Introduction.   (line   8)
* recipes, quoting newlines in:          Splitting Recipe Lines.
                                                              (line   6)
* recipes, splitting:                    Splitting Recipe Lines.
                                                              (line   6)
* recipes, using variables in:           Variables in Recipes.
                                                              (line   6)
* recompilation:                         Introduction.        (line  22)
* recompilation, avoiding:               Avoiding Compilation.
                                                              (line   6)
* recording events with empty targets:   Empty Targets.       (line   6)
* recursion:                             Recursion.           (line   6)
* recursion, and '-C':                   Options/Recursion.   (line  22)
* recursion, and '-f':                   Options/Recursion.   (line  22)
* recursion, and '-j':                   Options/Recursion.   (line  25)
* recursion, and '-o':                   Options/Recursion.   (line  22)
* recursion, and '-t':                   MAKE Variable.       (line  35)
* recursion, and '-W':                   Options/Recursion.   (line  22)
* recursion, and '-w':                   -w Option.           (line  20)
* recursion, and command line variable definitions: Options/Recursion.
                                                              (line  17)
* recursion, and environment:            Variables/Recursion. (line   6)
* recursion, and 'MAKE' variable:        MAKE Variable.       (line   6)
* recursion, and 'MAKEFILES' variable:   MAKEFILES Variable.  (line  15)
* recursion, and options:                Options/Recursion.   (line   6)
* recursion, and printing directories:   -w Option.           (line   6)
* recursion, and variables:              Variables/Recursion. (line   6)
* recursion, level of:                   Variables/Recursion. (line 114)
* recursive variable expansion:          Using Variables.     (line   6)
* recursive variable expansion <1>:      Flavors.             (line   6)
* recursively expanded variables:        Flavors.             (line   6)
* reference to variables:                Reference.           (line   6)
* reference to variables <1>:            Advanced.            (line   6)
* relinking:                             How Make Works.      (line  46)
* remaking loaded objects:               Remaking Loaded Objects.
                                                              (line   6)
* remaking makefiles:                    Remaking Makefiles.  (line   6)
* removal of target files:               Errors.              (line  64)
* removal of target files <1>:           Interrupts.          (line   6)
* removing duplicate words:              Text Functions.      (line 155)
* removing targets on failure:           Special Targets.     (line  71)
* removing, to clean up:                 Cleanup.             (line   6)
* reporting bugs:                        Bugs.                (line   6)
* rm:                                    Implicit Variables.  (line 106)
* 'rm' (shell command):                  Simple Makefile.     (line  85)
* 'rm' (shell command) <1>:              Wildcard Examples.   (line  12)
* 'rm' (shell command) <2>:              Phony Targets.       (line  20)
* 'rm' (shell command) <3>:              Errors.              (line  27)
* rule prerequisites:                    Rule Syntax.         (line  47)
* rule syntax:                           Rule Syntax.         (line   6)
* rule targets:                          Rule Syntax.         (line  18)
* rule, double-colon ('::'):             Double-Colon.        (line   6)
* rule, explicit, definition of:         Makefile Contents.   (line  10)
* rule, how to write:                    Rules.               (line   6)
* rule, implicit:                        Implicit Rules.      (line   6)
* rule, implicit, and directory search:  Implicit/Search.     (line   6)
* rule, implicit, and 'VPATH':           Implicit/Search.     (line   6)
* rule, implicit, chains of:             Chained Rules.       (line   6)
* rule, implicit, definition of:         Makefile Contents.   (line  16)
* rule, implicit, how to use:            Using Implicit.      (line   6)
* rule, implicit, introduction to:       make Deduces.        (line   6)
* rule, implicit, predefined:            Catalogue of Rules.  (line   6)
* rule, introduction to:                 Rule Introduction.   (line   6)
* rule, multiple for one target:         Multiple Rules.      (line   6)
* rule, no recipe or prerequisites:      Force Targets.       (line   6)
* rule, pattern:                         Pattern Intro.       (line   6)
* rule, static pattern:                  Static Pattern.      (line   6)
* rule, static pattern versus implicit:  Static versus Implicit.
                                                              (line   6)
* rule, with multiple targets:           Multiple Targets.    (line   6)
* rules, and '$':                        Rule Syntax.         (line  33)
* s. (SCCS file prefix):                 Catalogue of Rules.  (line 172)
* SCCS, rule to extract from:            Catalogue of Rules.  (line 172)
* search algorithm, implicit rule:       Implicit Rule Search.
                                                              (line   6)
* search path for prerequisites ('VPATH'): Directory Search.  (line   6)
* search path for prerequisites ('VPATH'), and implicit rules: Implicit/Search.
                                                              (line   6)
* search path for prerequisites ('VPATH'), and link libraries: Libraries/Search.
                                                              (line   6)
* searching for strings:                 Text Functions.      (line 104)
* secondary expansion:                   Secondary Expansion. (line   6)
* secondary expansion and explicit rules: Secondary Expansion.
                                                              (line 104)
* secondary expansion and implicit rules: Secondary Expansion.
                                                              (line 144)
* secondary expansion and static pattern rules: Secondary Expansion.
                                                              (line 136)
* secondary files:                       Chained Rules.       (line  46)
* secondary targets:                     Special Targets.     (line  54)
* 'sed' (shell command):                 Automatic Prerequisites.
                                                              (line  72)
* selecting a word:                      Text Functions.      (line 159)
* selecting word lists:                  Text Functions.      (line 168)
* sequences of commands:                 Canned Recipes.      (line   6)
* setting options from environment:      Options/Recursion.   (line  81)
* setting options in makefiles:          Options/Recursion.   (line  81)
* setting variables:                     Setting.             (line   6)
* several rules for one target:          Multiple Rules.      (line   6)
* several targets in a rule:             Multiple Targets.    (line   6)
* 'shar' (standard target):              Goals.               (line 104)
* shell command, function for:           Shell Function.      (line   6)
* shell file name pattern (in 'include'): Include.            (line  13)
* shell variables, setting in recipes:   Execution.           (line  12)
* shell wildcards (in 'include'):        Include.             (line  13)
* shell, choosing the:                   Choosing the Shell.  (line   6)
* SHELL, exported value:                 Variables/Recursion. (line  23)
* SHELL, import from environment:        Environment.         (line  37)
* shell, in DOS and Windows:             Choosing the Shell.  (line  38)
* 'SHELL', MS-DOS specifics:             Choosing the Shell.  (line  44)
* 'SHELL', value of:                     Choosing the Shell.  (line   6)
* signal:                                Interrupts.          (line   6)
* silent operation:                      Echoing.             (line   6)
* simple makefile:                       Simple Makefile.     (line   6)
* simple variable expansion:             Using Variables.     (line   6)
* simplifying with variables:            Variables Simplify.  (line   6)
* simply expanded variables:             Flavors.             (line  56)
* sorting words:                         Text Functions.      (line 147)
* spaces, in variable values:            Flavors.             (line 107)
* spaces, stripping:                     Text Functions.      (line  80)
* special targets:                       Special Targets.     (line   6)
* special variables:                     Special Variables.   (line   6)
* specifying makefile name:              Makefile Names.      (line  31)
* splitting long lines:                  Splitting Lines.     (line   6)
* splitting recipes:                     Splitting Recipe Lines.
                                                              (line   6)
* staged installs:                       DESTDIR.             (line   6)
* standard input:                        Parallel Input.      (line   6)
* standards conformance:                 Overview.            (line  13)
* standards for makefiles:               Makefile Conventions.
                                                              (line   6)
* static pattern rule:                   Static Pattern.      (line   6)
* static pattern rule, syntax of:        Static Usage.        (line   6)
* static pattern rule, versus implicit:  Static versus Implicit.
                                                              (line   6)
* static pattern rules, secondary expansion of: Secondary Expansion.
                                                              (line 136)
* stem:                                  Static Usage.        (line  17)
* stem <1>:                              Pattern Match.       (line   6)
* stem, shortest:                        Pattern Match.       (line  38)
* stem, variable for:                    Automatic Variables. (line  77)
* stopping make:                         Make Control Functions.
                                                              (line  11)
* strings, searching for:                Text Functions.      (line 104)
* stripping whitespace:                  Text Functions.      (line  80)
* sub-'make':                            Variables/Recursion. (line   6)
* subdirectories, recursion for:         Recursion.           (line   6)
* substitution variable reference:       Substitution Refs.   (line   6)
* suffix rule:                           Suffix Rules.        (line   6)
* suffix rule, for archive:              Archive Suffix Rules.
                                                              (line   6)
* suffix, adding:                        File Name Functions. (line  67)
* suffix, function to find:              File Name Functions. (line  42)
* suffix, substituting in variables:     Substitution Refs.   (line   6)
* suppressing inheritance:               Suppressing Inheritance.
                                                              (line   6)
* switches:                              Options Summary.     (line   6)
* symbol directories, updating archive:  Archive Symbols.     (line   6)
* syntax of recipe:                      Recipe Syntax.       (line   6)
* syntax of rules:                       Rule Syntax.         (line   6)
* tab character (in commands):           Rule Syntax.         (line  25)
* tabs in rules:                         Rule Introduction.   (line  21)
* 'TAGS' (standard target):              Goals.               (line 112)
* tangle:                                Catalogue of Rules.  (line 149)
* tangle <1>:                            Implicit Variables.  (line 100)
* 'tar' (standard target):               Goals.               (line 101)
* target:                                Rules.               (line   6)
* target pattern, implicit:              Pattern Intro.       (line   9)
* target pattern, static (not implicit): Static Usage.        (line  17)
* target, deleting on error:             Errors.              (line  64)
* target, deleting on interrupt:         Interrupts.          (line   6)
* target, expansion:                     Reading Makefiles.   (line  92)
* target, multiple in pattern rule:      Pattern Intro.       (line  53)
* target, multiple rules for one:        Multiple Rules.      (line   6)
* target, touching:                      Instead of Execution.
                                                              (line  24)
* target-specific variables:             Target-specific.     (line   6)
* targets:                               Rule Syntax.         (line  18)
* targets without a file:                Phony Targets.       (line   6)
* targets, built-in special:             Special Targets.     (line   6)
* targets, empty:                        Empty Targets.       (line   6)
* targets, force:                        Force Targets.       (line   6)
* targets, introduction to:              Rule Introduction.   (line   8)
* targets, multiple:                     Multiple Targets.    (line   6)
* targets, phony:                        Phony Targets.       (line   6)
* terminal rule:                         Match-Anything Rules.
                                                              (line   6)
* 'test' (standard target):              Goals.               (line 116)
* testing compilation:                   Testing.             (line   6)
* tex:                                   Catalogue of Rules.  (line 149)
* tex <1>:                               Implicit Variables.  (line  87)
* TeX, rule to run:                      Catalogue of Rules.  (line 149)
* texi2dvi:                              Catalogue of Rules.  (line 156)
* texi2dvi <1>:                          Implicit Variables.  (line  91)
* Texinfo, rule to format:               Catalogue of Rules.  (line 156)
* tilde ('~'):                           Wildcards.           (line  11)
* 'touch' (shell command):               Wildcard Examples.   (line  21)
* 'touch' (shell command) <1>:           Empty Targets.       (line  25)
* touching files:                        Instead of Execution.
                                                              (line  24)
* traditional directory search (GPATH):  Search Algorithm.    (line  42)
* types of prerequisites:                Prerequisite Types.  (line   6)
* types, conversion of:                  Guile Types.         (line   6)
* undefined variables, warning message:  Options Summary.     (line 292)
* undefining variable:                   Undefine Directive.  (line   6)
* updating archive symbol directories:   Archive Symbols.     (line   6)
* updating loaded objects:               Remaking Loaded Objects.
                                                              (line   6)
* updating makefiles:                    Remaking Makefiles.  (line   6)
* user defined functions:                Call Function.       (line   6)
* value:                                 Using Variables.     (line   6)
* value, how a variable gets it:         Values.              (line   6)
* variable:                              Using Variables.     (line   6)
* variable definition:                   Makefile Contents.   (line  22)
* variable references in recipes:        Variables in Recipes.
                                                              (line   6)
* variables:                             Variables Simplify.  (line   6)
* variables, '$' in name:                Computed Names.      (line   6)
* variables, and implicit rule:          Automatic Variables. (line   6)
* variables, appending to:               Appending.           (line   6)
* variables, automatic:                  Automatic Variables. (line   6)
* variables, command line:               Overriding.          (line   6)
* variables, command line, and recursion: Options/Recursion.  (line  17)
* variables, computed names:             Computed Names.      (line   6)
* variables, conditional assignment:     Flavors.             (line 135)
* variables, defining verbatim:          Multi-Line.          (line   6)
* variables, environment:                Variables/Recursion. (line   6)
* variables, environment <1>:            Environment.         (line   6)
* variables, exporting:                  Variables/Recursion. (line   6)
* variables, flavor of:                  Flavor Function.     (line   6)
* variables, flavors:                    Flavors.             (line   6)
* variables, how they get their values:  Values.              (line   6)
* variables, how to reference:           Reference.           (line   6)
* variables, loops in expansion:         Flavors.             (line  44)
* variables, modified reference:         Substitution Refs.   (line   6)
* variables, multi-line:                 Multi-Line.          (line   6)
* variables, nested references:          Computed Names.      (line   6)
* variables, origin of:                  Origin Function.     (line   6)
* variables, overriding:                 Override Directive.  (line   6)
* variables, overriding with arguments:  Overriding.          (line   6)
* variables, pattern-specific:           Pattern-specific.    (line   6)
* variables, recursively expanded:       Flavors.             (line   6)
* variables, setting:                    Setting.             (line   6)
* variables, simply expanded:            Flavors.             (line  56)
* variables, spaces in values:           Flavors.             (line 107)
* variables, substituting suffix in:     Substitution Refs.   (line   6)
* variables, substitution reference:     Substitution Refs.   (line   6)
* variables, target-specific:            Target-specific.     (line   6)
* variables, unexpanded value:           Value Function.      (line   6)
* variables, warning for undefined:      Options Summary.     (line 292)
* varying prerequisites:                 Static Pattern.      (line   6)
* verbatim variable definition:          Multi-Line.          (line   6)
* vpath:                                 Directory Search.    (line   6)
* 'VPATH', and implicit rules:           Implicit/Search.     (line   6)
* 'VPATH', and link libraries:           Libraries/Search.    (line   6)
* warnings, printing:                    Make Control Functions.
                                                              (line  35)
* weave:                                 Catalogue of Rules.  (line 149)
* weave <1>:                             Implicit Variables.  (line  94)
* Web, rule to run:                      Catalogue of Rules.  (line 149)
* what if:                               Instead of Execution.
                                                              (line  41)
* whitespace, in variable values:        Flavors.             (line 107)
* whitespace, stripping:                 Text Functions.      (line  80)
* wildcard:                              Wildcards.           (line   6)
* wildcard pitfalls:                     Wildcard Pitfall.    (line   6)
* wildcard, function:                    File Name Functions. (line 106)
* wildcard, in archive member:           Archive Members.     (line  36)
* wildcard, in 'include':                Include.             (line  13)
* wildcards and MS-DOS/MS-Windows backslashes: Wildcard Pitfall.
                                                              (line  31)
* Windows, choosing a shell in:          Choosing the Shell.  (line  38)
* word, selecting a:                     Text Functions.      (line 159)
* words, extracting first:               Text Functions.      (line 185)
* words, extracting last:                Text Functions.      (line 198)
* words, filtering:                      Text Functions.      (line 115)
* words, filtering out:                  Text Functions.      (line 133)
* words, finding number:                 Text Functions.      (line 180)
* words, iterating over:                 Foreach Function.    (line   6)
* words, joining lists:                  File Name Functions. (line  89)
* words, removing duplicates:            Text Functions.      (line 155)
* words, selecting lists of:             Text Functions.      (line 168)
* writing recipes:                       Recipes.             (line   6)
* writing rules:                         Rules.               (line   6)
* writing to a file:                     File Function.       (line   6)
* yacc:                                  Catalogue of Rules.  (line 117)
* yacc <1>:                              Implicit Variables.  (line  77)
* 'yacc':                                Canned Recipes.      (line  18)
* Yacc, rule to run:                     Catalogue of Rules.  (line 117)


File: make.info,  Node: Name Index,  Prev: Concept Index,  Up: Top

Index of Functions, Variables, & Directives
*******************************************

[index]
* Menu:

* $%:                                    Automatic Variables. (line  37)
* $(%D):                                 Automatic Variables. (line 129)
* $(%F):                                 Automatic Variables. (line 130)
* $(*D):                                 Automatic Variables. (line 124)
* $(*F):                                 Automatic Variables. (line 125)
* $(+D):                                 Automatic Variables. (line 147)
* $(+F):                                 Automatic Variables. (line 148)
* $(<D):                                 Automatic Variables. (line 137)
* $(<F):                                 Automatic Variables. (line 138)
* $(?D):                                 Automatic Variables. (line 153)
* $(?F):                                 Automatic Variables. (line 154)
* $(@D):                                 Automatic Variables. (line 113)
* $(@F):                                 Automatic Variables. (line 119)
* $(^D):                                 Automatic Variables. (line 142)
* $(^F):                                 Automatic Variables. (line 143)
* $*:                                    Automatic Variables. (line  73)
* $*, and static pattern:                Static Usage.        (line  82)
* $+:                                    Automatic Variables. (line  63)
* $<:                                    Automatic Variables. (line  43)
* $?:                                    Automatic Variables. (line  48)
* $@:                                    Automatic Variables. (line  30)
* $^:                                    Automatic Variables. (line  53)
* $|:                                    Automatic Variables. (line  69)
* % (automatic variable):                Automatic Variables. (line  37)
* %D (automatic variable):               Automatic Variables. (line 129)
* %F (automatic variable):               Automatic Variables. (line 130)
* * (automatic variable):                Automatic Variables. (line  73)
* * (automatic variable), unsupported bizarre usage: Missing. (line  44)
* *D (automatic variable):               Automatic Variables. (line 124)
* *F (automatic variable):               Automatic Variables. (line 125)
* + (automatic variable):                Automatic Variables. (line  63)
* +D (automatic variable):               Automatic Variables. (line 147)
* +F (automatic variable):               Automatic Variables. (line 148)
* -load:                                 load Directive.      (line  65)
* .DEFAULT:                              Special Targets.     (line  22)
* .DEFAULT <1>:                          Last Resort.         (line  23)
* .DEFAULT, and empty recipes:           Empty Recipes.       (line  16)
* .DEFAULT_GOAL (define default goal):   Special Variables.   (line  34)
* .DELETE_ON_ERROR:                      Special Targets.     (line  70)
* .DELETE_ON_ERROR <1>:                  Errors.              (line  64)
* .EXPORT_ALL_VARIABLES:                 Special Targets.     (line 135)
* .EXPORT_ALL_VARIABLES <1>:             Variables/Recursion. (line  99)
* .FEATURES (list of supported features): Special Variables.  (line 121)
* .IGNORE:                               Special Targets.     (line  77)
* .IGNORE <1>:                           Errors.              (line  30)
* .INCLUDE_DIRS (list of include directories): Special Variables.
                                                              (line 174)
* .INTERMEDIATE:                         Special Targets.     (line  47)
* .LIBPATTERNS:                          Libraries/Search.    (line   6)
* .LOADED:                               load Directive.      (line  62)
* .LOW_RESOLUTION_TIME:                  Special Targets.     (line  90)
* .NOTPARALLEL:                          Special Targets.     (line 141)
* .ONESHELL:                             Special Targets.     (line 149)
* .ONESHELL <1>:                         One Shell.           (line   6)
* .PHONY:                                Phony Targets.       (line  22)
* .PHONY <1>:                            Special Targets.     (line   8)
* .POSIX:                                Special Targets.     (line 156)
* .POSIX <1>:                            Options/Recursion.   (line  61)
* .PRECIOUS:                             Special Targets.     (line  31)
* .PRECIOUS <1>:                         Interrupts.          (line  22)
* .RECIPEPREFIX (change the recipe prefix character): Special Variables.
                                                              (line  99)
* .SECONDARY:                            Special Targets.     (line  53)
* .SECONDEXPANSION:                      Secondary Expansion. (line   6)
* .SECONDEXPANSION <1>:                  Special Targets.     (line  63)
* .SHELLFLAGS:                           Choosing the Shell.  (line   6)
* .SHELLFLAGS <1>:                       Choosing the Shell.  (line  87)
* .SILENT:                               Special Targets.     (line 121)
* .SILENT <1>:                           Echoing.             (line  24)
* .SUFFIXES:                             Special Targets.     (line  16)
* .SUFFIXES <1>:                         Suffix Rules.        (line  61)
* .VARIABLES (list of variables):        Special Variables.   (line 112)
* /usr/gnu/include:                      Include.             (line  53)
* /usr/include:                          Include.             (line  53)
* /usr/local/include:                    Include.             (line  53)
* < (automatic variable):                Automatic Variables. (line  43)
* <D (automatic variable):               Automatic Variables. (line 137)
* <F (automatic variable):               Automatic Variables. (line 138)
* ? (automatic variable):                Automatic Variables. (line  48)
* ?D (automatic variable):               Automatic Variables. (line 153)
* ?F (automatic variable):               Automatic Variables. (line 154)
* @ (automatic variable):                Automatic Variables. (line  30)
* @D (automatic variable):               Automatic Variables. (line 113)
* @F (automatic variable):               Automatic Variables. (line 119)
* ^ (automatic variable):                Automatic Variables. (line  53)
* ^D (automatic variable):               Automatic Variables. (line 142)
* ^F (automatic variable):               Automatic Variables. (line 143)
* | (automatic variable):                Automatic Variables. (line  69)
* abspath:                               File Name Functions. (line 120)
* addprefix:                             File Name Functions. (line  78)
* addsuffix:                             File Name Functions. (line  67)
* and:                                   Conditional Functions.
                                                              (line  45)
* AR:                                    Implicit Variables.  (line  40)
* ARFLAGS:                               Implicit Variables.  (line 113)
* AS:                                    Implicit Variables.  (line  43)
* ASFLAGS:                               Implicit Variables.  (line 116)
* basename:                              File Name Functions. (line  56)
* bindir:                                Directory Variables. (line  57)
* call:                                  Call Function.       (line   6)
* CC:                                    Implicit Variables.  (line  46)
* CFLAGS:                                Implicit Variables.  (line 120)
* CO:                                    Implicit Variables.  (line  66)
* COFLAGS:                               Implicit Variables.  (line 126)
* COMSPEC:                               Choosing the Shell.  (line  41)
* CPP:                                   Implicit Variables.  (line  52)
* CPPFLAGS:                              Implicit Variables.  (line 129)
* CTANGLE:                               Implicit Variables.  (line 103)
* 'CURDIR':                              Recursion.           (line  28)
* CWEAVE:                                Implicit Variables.  (line  97)
* CXX:                                   Implicit Variables.  (line  49)
* CXXFLAGS:                              Implicit Variables.  (line 123)
* define:                                Multi-Line.          (line   6)
* DESTDIR:                               DESTDIR.             (line   6)
* dir:                                   File Name Functions. (line  16)
* else:                                  Conditional Syntax.  (line   6)
* endef:                                 Multi-Line.          (line   6)
* endif:                                 Conditional Syntax.  (line   6)
* error:                                 Make Control Functions.
                                                              (line  11)
* eval:                                  Eval Function.       (line   6)
* exec_prefix:                           Directory Variables. (line  39)
* export:                                Variables/Recursion. (line  40)
* FC:                                    Implicit Variables.  (line  56)
* FFLAGS:                                Implicit Variables.  (line 133)
* file:                                  File Function.       (line   6)
* filter:                                Text Functions.      (line 115)
* filter-out:                            Text Functions.      (line 133)
* findstring:                            Text Functions.      (line 104)
* firstword:                             Text Functions.      (line 185)
* flavor:                                Flavor Function.     (line   6)
* foreach:                               Foreach Function.    (line   6)
* GET:                                   Implicit Variables.  (line  69)
* GFLAGS:                                Implicit Variables.  (line 136)
* gmk-eval:                              Guile Interface.     (line  18)
* gmk-expand:                            Guile Interface.     (line  12)
* gmk_add_function:                      Loaded Object API.   (line  53)
* gmk_alloc:                             Loaded Object API.   (line 149)
* gmk_eval:                              Loaded Object API.   (line 123)
* gmk_expand:                            Loaded Object API.   (line 117)
* gmk_free:                              Loaded Object API.   (line 154)
* gmk_func_ptr:                          Loaded Object API.   (line  95)
* GNUmakefile:                           Makefile Names.      (line   7)
* GPATH:                                 Search Algorithm.    (line  48)
* guile:                                 Guile Function.      (line   6)
* if:                                    Conditional Functions.
                                                              (line   6)
* if <1>:                                Conditional Functions.
                                                              (line  12)
* ifdef:                                 Conditional Syntax.  (line   6)
* ifeq:                                  Conditional Syntax.  (line   6)
* ifndef:                                Conditional Syntax.  (line   6)
* ifneq:                                 Conditional Syntax.  (line   6)
* include:                               Include.             (line   6)
* info:                                  Make Control Functions.
                                                              (line  43)
* join:                                  File Name Functions. (line  89)
* lastword:                              Text Functions.      (line 198)
* LDFLAGS:                               Implicit Variables.  (line 139)
* LDLIBS:                                Implicit Variables.  (line 144)
* LEX:                                   Implicit Variables.  (line  72)
* LFLAGS:                                Implicit Variables.  (line 150)
* libexecdir:                            Directory Variables. (line  70)
* LINT:                                  Implicit Variables.  (line  80)
* LINTFLAGS:                             Implicit Variables.  (line 162)
* load:                                  load Directive.      (line   9)
* LOADLIBES:                             Implicit Variables.  (line 144)
* M2C:                                   Implicit Variables.  (line  60)
* MAKE:                                  MAKE Variable.       (line   6)
* MAKE <1>:                              Flavors.             (line  88)
* MAKECMDGOALS:                          Goals.               (line  30)
* Makefile:                              Makefile Names.      (line   7)
* makefile:                              Makefile Names.      (line   7)
* MAKEFILES:                             MAKEFILES Variable.  (line   6)
* MAKEFILES <1>:                         Variables/Recursion. (line 126)
* MAKEFILE_LIST (list of parsed makefiles): Special Variables.
                                                              (line   8)
* MAKEFLAGS:                             Options/Recursion.   (line   6)
* MAKEINFO:                              Implicit Variables.  (line  83)
* MAKELEVEL:                             Variables/Recursion. (line 114)
* MAKELEVEL <1>:                         Flavors.             (line  88)
* MAKEOVERRIDES:                         Options/Recursion.   (line  50)
* 'MAKESHELL' (MS-DOS alternative to 'SHELL'): Choosing the Shell.
                                                              (line  27)
* MAKE_HOST:                             Quick Reference.     (line 348)
* MAKE_RESTARTS (number of times 'make' has restarted): Special Variables.
                                                              (line  73)
* MAKE_TERMERR (whether stderr is a terminal): Special Variables.
                                                              (line  80)
* MAKE_TERMOUT (whether stdout is a terminal): Special Variables.
                                                              (line  80)
* MAKE_VERSION:                          Quick Reference.     (line 343)
* MFLAGS:                                Options/Recursion.   (line  66)
* notdir:                                File Name Functions. (line  26)
* or:                                    Conditional Functions.
                                                              (line  37)
* origin:                                Origin Function.     (line   6)
* OUTPUT_OPTION:                         Catalogue of Rules.  (line 200)
* override:                              Override Directive.  (line   6)
* patsubst:                              Substitution Refs.   (line  28)
* patsubst <1>:                          Text Functions.      (line  18)
* PC:                                    Implicit Variables.  (line  63)
* PFLAGS:                                Implicit Variables.  (line 156)
* prefix:                                Directory Variables. (line  29)
* private:                               Suppressing Inheritance.
                                                              (line   6)
* realpath:                              File Name Functions. (line 113)
* RFLAGS:                                Implicit Variables.  (line 159)
* RM:                                    Implicit Variables.  (line 106)
* sbindir:                               Directory Variables. (line  63)
* SHELL:                                 Choosing the Shell.  (line   6)
* SHELL <1>:                             Choosing the Shell.  (line  88)
* shell:                                 Shell Function.      (line   6)
* 'SHELL' (recipe execution):            Execution.           (line   6)
* sort:                                  Text Functions.      (line 147)
* strip:                                 Text Functions.      (line  80)
* subst:                                 Multiple Targets.    (line  28)
* subst <1>:                             Text Functions.      (line   9)
* suffix:                                File Name Functions. (line  42)
* SUFFIXES:                              Suffix Rules.        (line  81)
* TANGLE:                                Implicit Variables.  (line 100)
* TEX:                                   Implicit Variables.  (line  87)
* TEXI2DVI:                              Implicit Variables.  (line  90)
* undefine:                              Undefine Directive.  (line   6)
* unexport:                              Variables/Recursion. (line  45)
* value:                                 Value Function.      (line   6)
* VPATH:                                 Directory Search.    (line   6)
* VPATH <1>:                             General Search.      (line   6)
* vpath:                                 Directory Search.    (line   6)
* vpath <1>:                             Selective Search.    (line   6)
* warning:                               Make Control Functions.
                                                              (line  35)
* WEAVE:                                 Implicit Variables.  (line  94)
* wildcard:                              Wildcard Function.   (line   6)
* wildcard <1>:                          File Name Functions. (line 106)
* word:                                  Text Functions.      (line 159)
* wordlist:                              Text Functions.      (line 168)
* words:                                 Text Functions.      (line 180)
* YACC:                                  Implicit Variables.  (line  76)
* YFLAGS:                                Implicit Variables.  (line 153)