SYNOPSIS
$GIT_DIR/hooks/*
DESCRIPTION
Hooks are little scripts you can place in $GIT_DIR/hooks
directory to trigger action at certain points. When
git init is run, a handful of example hooks are copied into the
hooks
directory of the new repository, but by default they are
all disabled. To enable a hook, rename it by removing its .sample
suffix.
Note
|
It is also a requirement for a given hook to be executable.
However - in a freshly initialized repository - the .sample files are
executable by default. |
This document describes the currently defined hooks.
HOOKS
applypatch-msg
This hook is invoked by git am script. It takes a single parameter, the name of the file that holds the proposed commit log message. Exiting with non-zero status causes git am to abort before applying the patch.
The hook is allowed to edit the message file in place, and can be used to normalize the message into some project standard format (if the project has one). It can also be used to refuse the commit after inspecting the message file.
The default applypatch-msg hook, when enabled, runs the commit-msg hook, if the latter is enabled.
pre-applypatch
This hook is invoked by git am. It takes no parameter, and is invoked after the patch is applied, but before a commit is made.
If it exits with non-zero status, then the working tree will not be committed after applying the patch.
It can be used to inspect the current working tree and refuse to make a commit if it does not pass certain test.
The default pre-applypatch hook, when enabled, runs the pre-commit hook, if the latter is enabled.
post-applypatch
This hook is invoked by git am. It takes no parameter, and is invoked after the patch is applied and a commit is made.
This hook is meant primarily for notification, and cannot affect the outcome of git am.
pre-commit
This hook is invoked by git commit, and can be bypassed
with --no-verify
option. It takes no parameter, and is
invoked before obtaining the proposed commit log message and
making a commit. Exiting with non-zero status from this script
causes the git commit to abort.
The default pre-commit hook, when enabled, catches introduction of lines with trailing whitespaces and aborts the commit when such a line is found.
All the git commit hooks are invoked with the environment
variable GIT_EDITOR=:
if the command will not bring up an editor
to modify the commit message.
prepare-commit-msg
This hook is invoked by git commit right after preparing the default log message, and before the editor is started.
It takes one to three parameters. The first is the name of the file
that contains the commit log message. The second is the source of the commit
message, and can be: message
(if a -m
or -F
option was
given); template
(if a -t
option was given or the
configuration option commit.template
is set); merge
(if the
commit is a merge or a .git/MERGE_MSG
file exists); squash
(if a .git/SQUASH_MSG
file exists); or commit
, followed by
a commit SHA-1 (if a -c
, -C
or --amend
option was given).
If the exit status is non-zero, git commit will abort.
The purpose of the hook is to edit the message file in place, and
it is not suppressed by the --no-verify
option. A non-zero exit
means a failure of the hook and aborts the commit. It should not
be used as replacement for pre-commit hook.
The sample prepare-commit-msg
hook that comes with Git comments
out the Conflicts:
part of a merge’s commit message.
commit-msg
This hook is invoked by git commit, and can be bypassed
with --no-verify
option. It takes a single parameter, the
name of the file that holds the proposed commit log message.
Exiting with non-zero status causes the git commit to
abort.
The hook is allowed to edit the message file in place, and can be used to normalize the message into some project standard format (if the project has one). It can also be used to refuse the commit after inspecting the message file.
The default commit-msg hook, when enabled, detects duplicate "Signed-off-by" lines, and aborts the commit if one is found.
post-commit
This hook is invoked by git commit. It takes no parameter, and is invoked after a commit is made.
This hook is meant primarily for notification, and cannot affect the outcome of git commit.
pre-rebase
This hook is called by git rebase and can be used to prevent a branch from getting rebased. The hook may be called with one or two parameters. The first parameter is the upstream from which the series was forked. The second parameter is the branch being rebased, and is not set when rebasing the current branch.
post-checkout
This hook is invoked when a git checkout is run after having updated the worktree. The hook is given three parameters: the ref of the previous HEAD, the ref of the new HEAD (which may or may not have changed), and a flag indicating whether the checkout was a branch checkout (changing branches, flag=1) or a file checkout (retrieving a file from the index, flag=0). This hook cannot affect the outcome of git checkout.
It is also run after git clone, unless the --no-checkout (-n) option is used. The first parameter given to the hook is the null-ref, the second the ref of the new HEAD and the flag is always 1.
This hook can be used to perform repository validity checks, auto-display differences from the previous HEAD if different, or set working dir metadata properties.
post-merge
This hook is invoked by git merge, which happens when a git pull is done on a local repository. The hook takes a single parameter, a status flag specifying whether or not the merge being done was a squash merge. This hook cannot affect the outcome of git merge and is not executed, if the merge failed due to conflicts.
This hook can be used in conjunction with a corresponding pre-commit hook to save and restore any form of metadata associated with the working tree (e.g.: permissions/ownership, ACLS, etc). See contrib/hooks/setgitperms.perl for an example of how to do this.
pre-push
This hook is called by git push and can be used to prevent a push from taking place. The hook is called with two parameters which provide the name and location of the destination remote, if a named remote is not being used both values will be the same.
Information about what is to be pushed is provided on the hook’s standard input with lines of the form:
<local ref> SP <local sha1> SP <remote ref> SP <remote sha1> LF
For instance, if the command git push origin master:foreign
were run the
hook would receive a line like the following:
refs/heads/master 67890 refs/heads/foreign 12345
although the full, 40-character SHA-1s would be supplied. If the foreign ref
does not yet exist the <remote SHA-1>
will be 40 0
. If a ref is to be
deleted, the <local ref>
will be supplied as (delete)
and the <local
SHA-1>
will be 40 0
. If the local commit was specified by something other
than a name which could be expanded (such as HEAD~
, or a SHA-1) it will be
supplied as it was originally given.
If this hook exits with a non-zero status, git push will abort without pushing anything. Information about why the push is rejected may be sent to the user by writing to standard error.
pre-receive
This hook is invoked by git-receive-pack on the remote repository, which happens when a git push is done on a local repository. Just before starting to update refs on the remote repository, the pre-receive hook is invoked. Its exit status determines the success or failure of the update.
This hook executes once for the receive operation. It takes no arguments, but for each ref to be updated it receives on standard input a line of the format:
<old-value> SP <new-value> SP <ref-name> LF
where <old-value>
is the old object name stored in the ref,
<new-value>
is the new object name to be stored in the ref and
<ref-name>
is the full name of the ref.
When creating a new ref, <old-value>
is 40 0
.
If the hook exits with non-zero status, none of the refs will be updated. If the hook exits with zero, updating of individual refs can still be prevented by the update hook.
Both standard output and standard error output are forwarded to
git send-pack on the other end, so you can simply echo
messages
for the user.
update
This hook is invoked by git-receive-pack on the remote repository, which happens when a git push is done on a local repository. Just before updating the ref on the remote repository, the update hook is invoked. Its exit status determines the success or failure of the ref update.
The hook executes once for each ref to be updated, and takes three parameters:
-
the name of the ref being updated,
-
the old object name stored in the ref,
-
and the new object name to be stored in the ref.
A zero exit from the update hook allows the ref to be updated. Exiting with a non-zero status prevents git-receive-pack from updating that ref.
This hook can be used to prevent forced update on certain refs by making sure that the object name is a commit object that is a descendant of the commit object named by the old object name. That is, to enforce a "fast-forward only" policy.
It could also be used to log the old..new status. However, it does not know the entire set of branches, so it would end up firing one e-mail per ref when used naively, though. The post-receive hook is more suited to that.
Another use suggested on the mailing list is to use this hook to implement access control which is finer grained than the one based on filesystem group.
Both standard output and standard error output are forwarded to
git send-pack on the other end, so you can simply echo
messages
for the user.
The default update hook, when enabled—and with
hooks.allowunannotated
config option unset or set to false—prevents
unannotated tags to be pushed.
post-receive
This hook is invoked by git-receive-pack on the remote repository, which happens when a git push is done on a local repository. It executes on the remote repository once after all the refs have been updated.
This hook executes once for the receive operation. It takes no arguments, but gets the same information as the pre-receive hook does on its standard input.
This hook does not affect the outcome of git-receive-pack, as it is called after the real work is done.
This supersedes the post-update hook in that it gets both old and new values of all the refs in addition to their names.
Both standard output and standard error output are forwarded to
git send-pack on the other end, so you can simply echo
messages
for the user.
The default post-receive hook is empty, but there is
a sample script post-receive-email
provided in the contrib/hooks
directory in Git distribution, which implements sending commit
emails.
post-update
This hook is invoked by git-receive-pack on the remote repository, which happens when a git push is done on a local repository. It executes on the remote repository once after all the refs have been updated.
It takes a variable number of parameters, each of which is the name of ref that was actually updated.
This hook is meant primarily for notification, and cannot affect the outcome of git-receive-pack.
The post-update hook can tell what are the heads that were pushed, but it does not know what their original and updated values are, so it is a poor place to do log old..new. The post-receive hook does get both original and updated values of the refs. You might consider it instead if you need them.
When enabled, the default post-update hook runs git update-server-info to keep the information used by dumb transports (e.g., HTTP) up-to-date. If you are publishing a Git repository that is accessible via HTTP, you should probably enable this hook.
Both standard output and standard error output are forwarded to
git send-pack on the other end, so you can simply echo
messages
for the user.
push-to-checkout
This hook is invoked by git-receive-pack on the remote repository,
which happens when a git push is done on a local repository, when
the push tries to update the branch that is currently checked out
and the receive.denyCurrentBranch
configuration variable is set to
updateInstead
. Such a push by default is refused if the working
tree and the index of the remote repository has any difference from
the currently checked out commit; when both the working tree and the
index match the current commit, they are updated to match the newly
pushed tip of the branch. This hook is to be used to override the
default behaviour.
The hook receives the commit with which the tip of the current branch is going to be updated. It can exit with a non-zero status to refuse the push (when it does so, it must not modify the index or the working tree). Or it can make any necessary changes to the working tree and to the index to bring them to the desired state when the tip of the current branch is updated to the new commit, and exit with a zero status.
For example, the hook can simply run git read-tree -u -m HEAD "$1"
in order to emulate git fetch that is run in the reverse direction
with git push
, as the two-tree form of read-tree -u -m
is
essentially the same as git checkout
that switches branches while
keeping the local changes in the working tree that do not interfere
with the difference between the branches.
pre-auto-gc
This hook is invoked by git gc --auto. It takes no parameter, and exiting with non-zero status from this script causes the git gc --auto to abort.
post-rewrite
This hook is invoked by commands that rewrite commits (git commit
--amend
, git-rebase; currently git-filter-branch does not call
it!). Its first argument denotes the command it was invoked by:
currently one of amend
or rebase
. Further command-dependent
arguments may be passed in the future.
The hook receives a list of the rewritten commits on stdin, in the format
<old-sha1> SP <new-sha1> [ SP <extra-info> ] LF
The extra-info is again command-dependent. If it is empty, the preceding SP is also omitted. Currently, no commands pass any extra-info.
The hook always runs after the automatic note copying (see "notes.rewrite.<command>" in git-config(1)) has happened, and thus has access to these notes.
The following command-specific comments apply:
- rebase
-
For the squash and fixup operation, all commits that were squashed are listed as being rewritten to the squashed commit. This means that there will be several lines sharing the same new-sha1.
The commits are guaranteed to be listed in the order that they were processed by rebase.
GIT
Part of the git(1) suite