/* reswri.c Copyright (c) Kapteyn Astronomical Institute 1995 All Rights Reserved. #> reswri.dc1 Program: reswri Purpose: RESWRI derives the kinematical parameters from the observed velocity field by fitting tilted-rings to the velocity field and fits harmonic terms after convergence of the ROTCUR part of code. RESWRI uses the 1 sigma error-field to calculate its errors. Category: CALCULATION, DYNAMICS, ROTATION CURVES, VELOCITY FIELDS File: reswri.c Author: K.G. Begeman ROTCUR modified to RESWRI by R.H.M Schoenmakers Keywords: INSET= Set (and subset) of observed velocity field. ** INSET2= Input set (and subset) of total HI field. OUTSET= Output set (and subset) of residual of residual: [none] BOX= Select area of velocity field [entire velocity field]. BUNIT= If the map units are not found in the header, they must be supplied by the user [KM/S]. RADII= Give central radii of concentric rings. Maximum number of rings is 512. Units are arcsec. WIDTHS= Give width of rings. If number of widths is less than the number of radii, the last supplied width will be used for the rest of the rings. Units are arcsec. VSYS= Give initial estimate of systemic velocity in km/s. VROT= Initial estimate(s) rotation velocity(ies) in km/s. If the number of rotation velocities is less than the number of rings, the last supplied rotation velocity will be used for the rest of the rings. VEXP= Initial estimate(s) expansion velocity(ies) in km/s [0.0]. If the number of expansion velocities is less than the number of rings, the last supplied expansion velocity will be used for the rest of the rings. PA= Initial estimate(s) position angle(s) in degrees. If the number of position angles is less than the number of rings, the last supplied position angle will be used for the rest of the rings. INCL= Initial estimate(s) inclination(s) in degrees. If the number of inclinations is less than the number of rings, the last supplied inclination will be used for the rest of the rings. CENTRE= Initial estimates of centre of rotation in any coordinates. FREEANGLE= Free angle around minor axis: [0.0] Angle around minor axis in degrees within which radial velocities are discarded. For RESWRI this value is usually 0.0. SIDE= Which half of the velocity field should be used in the fitting [RECEDING and APPROACHING half]. WEIGHT= Weighting function: [UNIFORM] For RESWRI always use UNIFORM !! There are three weighting functions available: the UNIFORM weighting function, were all points in a ring have equal weights, the [COSINE] weighting function, were each point in a ring is weighted with |cos(theta)|, and the COS-SQUARED weighting function, were each point is weighted with cos(theta)^2. FIXED= Which parameter(s) should be kept fixed [NONE]. The parameters are named VSYS, VROT, PA, INCL, XPOS and YPOS. If you don't want to fit the inclination and the systemic velocity, you should type: INCL VSYS. If a fit is wanted to only one half of the velocity field the parameters VSYS, XPOS and YPOS are automatically kept fixed. ** TOLERANCE= Tolerance of least-squares fitting [0.001]. FILENAME= Name of text file to save results [reswri**]. Default the name of the file is equal to the name of the table. FILECOEFF= Filename kinematic harmonic coeff.: [coefficients.txt] File on disk with kinematic harmonic coefficients. FILEHICOEF= Filename surface density harmonic coeff.: [hicoef.txt] File on disk with surface density harmonic coefficients. Prompted only if INSET2= was specified. Description: This program does a least-squares-fitting with errors on the value of v(x,y) to the function: v(x,y) = VSYS + VROT * cos(theta) * sin(INCL) + VEXP * sin(theta) * sin(INCL) - (x-XPOS) * sin(PA) + (y-YPOS) * cos(PA) with: cos(theta) = ------------------------------------------- r - (x-XPOS) * cos(PA) - (y-YPOS) * sin(PA) and: sin(theta) = --------------------------------------------- r * cos(INCL) Here v(x,y) denotes the radial velocity at rectangular sky coordinates x and y, VSYS the systemic velocity, VROT the rotational velocity, VEXP the expansion velocity, INCL the inclination angle and theta the azimuthal distance from the major axis in the plane of the galaxy. Theta is a function of the inclination (INCL) and the position angle (PA) of the major axis. XPOS and YPOS denote the position of the rotation centre. This program will fit for each ring the parameters VSYS, VROT, VEXP, INCL, PA, XPOS and YPOS. Note that the position angle (PA) of the major axis is defined as the angle, taken in anti-clockwise direction between the north direction on the sky and the major axis of the receding half of the galaxy. When this fitting procedure has converged, the program fits a basis a(0) + SUM(i=1,fitdeg) a(i)cos(i*theta) + b(i)sin(i*theta) to the points with angle theta and velocity v(x,y). The code uses a singular value decomposition fitting routine to do this (taken from Numerical Recipes, Press et al.). Notes: The results of the fitting are saved in a GDS table reswri**, where ** is a number from 1 to 99. If table reswri99 is already present, table reswri00 will be used. The results are also stored in a file named reswri.** or as defined by the user (keyword FILENAME=). Note also that the parts of the code between "=================================" -type of comments have been added by RHS to the original ROTCUR-code. Example: reswri reswri Version 1.2 (Nov 24 1998) RESWRI INSET=drop 2 inset2=drop 1 Set drop has 3 axes RA-NCP from -134 to 115 DEC-NCP from -116 to 135 PARAM-GAUSSFIT from 1 to 11 Set drop has 3 axes RA-NCP from -134 to 115 DEC-NCP from -116 to 135 PARAM-GAUSSFIT from 1 to 11 RESWRI BOX= BOX range for set drop : RA-NCP from -134 to 115 DEC-NCP from -116 to 135 RESWRI OUTSET=martintest Set martintest has 3 axes RA-NCP from -134 to 115 DEC-NCP from -116 to 135 PARAM-GAUSSFIT from 2 to 2 RESWRI VSYS=600 RESWRI VROT=150 RESWRI VROT= RESWRI VEXP= RESWRI PA=216 RESWRI PA= RESWRI INCL=70 RESWRI INCL= RESWRI CENTRE=8 -9 RESWRI FREEANGLE= RESWRI SIDE= RESWRI WEIGHT= RESWRI FIXED=vexp xpos ypos RESWRI FITORDER=9 RESWRI FILECOEFF= RESWRI OVERWRITE=y RESWRI FILEHICOEFF= RESWRI OVERWRITE=y RESWRI FILEHICOEFF= RESWRI OVERWRITE=y radius of ring: 80.00 arcsec iter. systemic rotation position incli- points sigma number velocity velocity angle nation velocity 0 600.00 150.00 216.00 70.00 102 212. 1 789.76 29.35 254.30 53.84 165 31.0 2 766.41 41.63 255.90 44.94 196 21.0 3 763.00 36.60 253.60 56.48 166 20.6 4 763.08 36.61 253.69 56.45 168 20.5 5 763.08 36.61 253.69 56.45 168 20.5 ........ RESWRI wrote kinematic harmonic coeff. in file [coefficients.txt] RESWRI wrote surface density harmonic coeff. in file [hicof.txt] RESWRI FILENAME= Results will be stored in TABLE reswri00 and FILE reswri.00 The output file in FILECOEFF= (default coefficients.txt) is an ASCII file with the following columns: radius(arcsec) c0, error c0, c1, error c1, s1, error s1, c2, error c2, s2, error s2, c3, error c3, s3, error s3, etc... All c and s values are in Km/s. Use your own plot program (GPLOT, sm, etc.) to visualize this data. Updates: Jul 17, 1992: KGB, Document created. Mar 20, 1993: KGB, fitting one half of vfield repaired. Mar 23, 1993: KGB, fitting of expansion velocities. Jan 13, 1994: KGB, keyword FILENAME= added. May 20, 1994: VOG, MAXRING increased from 60 to 512 Feb 15, 1995: RHS, Fitting of higher order harmonic terms Nov 24, 1998: RHS, Added fitting of harmonic terms and renamed modified ROTCUR to RESWRI. Nov 24, 1998: VOG, Installed RESWRI with new filename keywords FILECOEFF= and FILEHICOEFF= Apr 15, 2009: VOG, -Changed definition of nint() to use floor() for the nearest integer. Change was necessary for consistency with other coordinate routines. -Change '|' to '||' in if statement #< */ /* * Includes: */ #include "float.h" /* */ #include "math.h" /* */ #include "stddef.h" /* */ #include "stdio.h" /* */ #include "stdlib.h" /* */ #include "string.h" /* */ #include "time.h" /* */ #include "gipsyc.h" /* GIPSY definitions */ #include "cmain.h" /* C programme */ #include "anyout.h" /* anyout_c */ #include "axtype.h" /* axtype_c */ #include "cancel.h" /* cancel_c */ #include "error.h" /* error_c */ #include "factor.h" /* factor_c */ #include "finis.h" /* finis_c */ #include "gdsa_crecol.h" /* gdsa_crecol_c */ #include "gdsa_tabinq.h" /* gdsa_tabinq_c */ #include "gdsa_wcint.h" /* gdsa_wcint_c */ #include "gdsa_wrcom.h" /* gdsa_wrcom_c */ #include "gdsa_wcreal.h" /* gdsa_wcreal_c */ #include "gdsbox.h" /* gdsbox_c */ /* =========================================== */ #include "gdsasn.h" #include "gdsout.h" #include "gdsi_write.h" /* =========================================== */ #include "gdsc_fill.h" /* gdsc_fill_c */ #include "gdsc_name.h" /* gdsc_name_c */ #include "gdsd_rchar.h" /* gdsd_rchar_c */ #include "gdsd_rdble.h" /* gdsd_rdble_c */ #include "gdsd_wchar.h" /* gdsd_wchar_c */ #include "gdsinp.h" /* gdsinp_c */ #include "gdsi_read.h" /* gdsi_read_c */ #include "gdspos.h" /* gdspos_c */ #include "init.h" /* init_c */ #include "lsqfit.h" /* lsqfit_c */ #include "match.h" /* match_c */ #include "nelc.h" /* nelc_c */ #include "setfblank.h" /* setfblank_c */ #include "status.h" /* status_c */ #include "userchar.h" /* userchar_c */ #include "usercharu.h" /* usercharu_c */ #include "userreal.h" /* userreal_c */ #include "usertext.h" /* usertext_c */ #include "userint.h" /* userint_c */ #include "userlog.h" #include "reject.h" #include "userfio.h" #include "matrix.h" /* * Keywords and messages: */ #define KEY_BOX tofchar("BOX=") #define KEY_BUNIT tofchar("BUNIT=") #define KEY_CENTRE tofchar("CENTRE=") #define KEY_FILENAME tofchar("FILENAME=") #define KEY_FIXED tofchar("FIXED=") #define KEY_FREEANGLE tofchar("FREEANGLE=") #define KEY_INCL tofchar("INCL=") #define KEY_INSET tofchar("INSET=") /* =========================================== */ #define KEY_INSET2 tofchar("INSET2=") #define KEY_OUTCRE tofchar("OUTCRE=") #define KEY_OUTSET tofchar("OUTSET=") #define KEY_FILE1 tofchar("FILECOEFF=") #define KEY_FILE2 tofchar("FILEHICOEFF=") /* =========================================== */ #define KEY_PA tofchar("PA=") #define KEY_RADII tofchar("RADII=") #define KEY_SIDE tofchar("SIDE=") #define KEY_TOLERANCE tofchar("TOLERANCE=") #define KEY_VEXP tofchar("VEXP=") #define KEY_VROT tofchar("VROT=") #define KEY_VSYS tofchar("VSYS=") #define KEY_WEIGHT tofchar("WEIGHT=") #define KEY_WIDTHS tofchar("WIDTHS=") /* =========================================== */ #define KEY_FITORD tofchar("FITORDER=") /* =========================================== */ #define MES_BOX tofchar("Area of velocity field [whole map]") #define MES_BUNIT tofchar("Units of velocity field [KM/S]") #define MES_CENTRE tofchar("Central position of velocity field") #define MES_FILENAME "File for tilted ring results: [%s]" #define MES_FIXED tofchar("Fixed parameters [NONE]") #define MES_FREEANGLE tofchar("Free angle around minor axis: [0.0]") #define MES_INCL tofchar("Inclination of rings in degrees") #define MES_INSET tofchar("Input set (and subset) of velocity field") /* =========================================== */ #define MES_INSET2 tofchar("Input set (and subset) of total HI field") #define MES_OUTSET tofchar("Output set (and subset) of residual of residual [none]") /* =========================================== */ #define MES_PA tofchar("Position Angles of rings in degrees") #define MES_RADII tofchar("Central radii of rings in arcsec") #define MES_SIDE tofchar("Which half of velocity field [BOTH]") #define MES_TOLERANCE tofchar("Tolerance of fit [0.001]") #define MES_VEXP tofchar("Expansion velocities of rings in km/s [0.0]" ) #define MES_VROT tofchar("Rotation velocities of rings in km/s") #define MES_VSYS tofchar("Systemic velocity in km/s") #define MES_WEIGHT tofchar("Weighting function [UNIFORM]") #define MES_WIDTHS tofchar("Widths of rings in arcsec") /* =========================================== */ #define MES_FITORD tofchar("Highest order in harmonic fit") /* =========================================== */ /* * Defines: */ #define CLASS 1 /* class 1 programme */ #define CLASSDIM 2 /* dimension of subset */ #define F 0.0174532925 /* degrees to radians */ #define G 0.4246609001 /* ? */ #define PI 3.141592654 #define MAXAXES 10 /* max. number of axes */ #define MAXFITSLEN 18 /* max. length fits char */ #define MAXLEN 20 /* max. length of text */ #define MAXMESLEN 128 /* max. lenght of messages */ #define MAXOPT 8 /* max. number of options */ #define MAXPAR 7 /* max. number of parameters */ #define MAXPIXEL 8000 /* max. numberof pixels in ring */ #define MAXRING 512 /* max. number of rings */ #define MAXSETNAMLEN 80 /* max. length of set name */ #define MAXTEXTLEN 320 /* max. length of text input */ /* =========================================== */ #define MAXFITDEG 41 /* max. degree of harmonic fit */ #define NO 0 #define YES 1 #define REQUEST 1 /* =========================================== */ #define VERSION "1.2" /* version.subversion number */ #define fcopy( f, c ) \ {int k;for(k=0;c[k]&&ky?x:y) #define min( x, y ) \ (x0.0?(int)(x+0.5):(int)(x-0.5)) */ /* * variables: */ static char bset[MAXSETNAMLEN]; /* buffer for name of set */ static double cdelt[CLASSDIM]; /* grid separations */ static double mapfac; /* convert map values to KM/S */ static double mapphi; /* rotation of map */ static fchar set; /* points to bset */ static fint blo[CLASSDIM]; /* lower edge of box */ static fint bup[CLASSDIM]; /* upper edge of box */ static fint subset; /* subset level */ static float blank; /* system blank */ static float *vfield; /* buffer for velocity field */ /* =========================================== */ static char osetb[MAXSETNAMLEN]; /* buffer for name of error set */ static fchar oset = {osetb, MAXSETNAMLEN} ; static fint osubset; /* subset level */ static fint ocwlo; static fint ocwup; static fint oaxperm[MAXAXES]; static fint oaxsize[MAXAXES]; static char bset2[MAXSETNAMLEN]; /* buffer for name of error set */ static fchar set2; /* points to bset2 */ static fint subset2; /* subset level */ static float *HIfield; /* buffer for HI field */ FILE *mp; /* file pointer */ FILE *hicof; /* =========================================== */ /* * the parameters: */ static fint cor[2] = { -1.0, -1.0 };/* correlation ellips */ static fint mask[MAXPAR]; /* parameter fit mask */ static fint side; /* which half of velocity field */ static fint wpow; /* weighting power */ static float elp4[4]; /* coef matrix */ static float thetaf; /* free angle */ static float tol = 0.001; /* tolerance of fit */ static fint nfit; /* number of fits */ static fint npts[MAXRING]; /* number of points */ static fint nrad; /* number of rings */ static float chis[MAXRING]; /* chis */ static float elp[MAXRING][4]; /* coef. matrices */ static float rads[MAXRING]; /* radii of rings */ static float wids[MAXRING]; /* width of rings */ static float incle[MAXRING]; /* error in incl */ static float inclf[MAXRING]; /* fitted incl */ static float incli[MAXRING]; /* initial incl */ static float posae[MAXRING]; /* error in posa */ static float posaf[MAXRING]; /* fitted posa */ static float posai[MAXRING]; /* initial posa */ static float vexpe[MAXRING]; /* error in vexp */ static float vexpf[MAXRING]; /* fitted vexp */ static float vexpi[MAXRING]; /* initial vexp */ static float vrote[MAXRING]; /* error in vrot */ static float vrotf[MAXRING]; /* fitted vrot */ static float vroti[MAXRING]; /* initial vrot */ static float vsyse[MAXRING]; /* error in vsys */ static float vsysf[MAXRING]; /* fitted vsys */ static float vsysi; /* initial vsys */ static float xpose[MAXRING]; /* error in xpos */ static float xposf[MAXRING]; /* fitted xpos */ static float xposi; /* initial xpos */ static float ypose[MAXRING]; /* error in ypos */ static float yposf[MAXRING]; /* fitted ypos */ static float yposi; /* initial ypos */ /* =========================================== */ static float outx[MAXPIXEL]; /* array with output for total HI*/ static float outy[MAXPIXEL]; /* array with output for total HI*/ static float outth[MAXPIXEL]; /* theta for harm.fit */ static float outres[MAXPIXEL]; /* velocityfield for harm.fit */ static float outHI[MAXPIXEL]; /* HIfield for harm.fit */ static float outwei[MAXPIXEL]; /* weight for harm.fit */ static fint fitdeg; /* degree of fit */ static float **outmat; static int outwri; /* giving whether or not an outputset */ /* should be created and written */ static char coeffb[256]; static char hicofb[256]; static fchar Coeff; static fchar Hicof; static int yesinset2; /* =========================================== */ /* * func_c calculates radial velocity from rotation curve. */ float func_c( float c[CLASSDIM] , /* grid position in plane of galaxy */ float p[MAXPAR] , /* parameters of ring */ fint *m , /* dummy (number of parameters) */ fint *fopt ) /* option */ { float vs, vc, vr; /* parameters of velocity field */ float x, y; /* sky coordinates */ float cost1, cost2, sint1, sint2, x1, y1, r; static float phi= 0.0, inc = 0.0; /* saved parameters */ static float cosp1 = 1.0, cosp2 = 1.0; static float sinp1 = 0.0, sinp2 = 0.0; static float cosi1 = 1.0, cosi2 = 1.0; static float sini1 = 0.0, sini2 = 0.0; vs = p[0]; /* systemic velocity */ vc = p[1]; /* circular velocity */ vr = p[2]; /* expansion velocity */ if (p[3] != phi) { /* new position angle ? */ phi = p[3]; /* position angle */ cosp1 = cos( F * phi ); /* cosine */ cosp2 = cosp1 * cosp1; /* cosine squared */ sinp1 = sin ( F * phi ); /* sine */ sinp2 = sinp1 * sinp1; /* sine squared */ } if (p[4] != inc) { /* new inclination ? */ inc = p[4]; /* inclination */ cosi1 = cos( F * inc ); /* cosine */ cosi2 = cosi1 * cosi1; /* cosine squared */ sini1 = sin ( F * inc ); /* sine */ sini2 = sini1 * sini1; /* sine squared */ } x = c[0] - p[5] * cdelt[0]; /* calculate x */ y = c[1] - p[6] * cdelt[1]; /* calculate y */ x1 = ( -x * sinp1 + y * cosp1 ); /* x in plane of galaxy */ y1 = ( -x * cosp1 - y * sinp1 ) / cosi1; /* y in plane of galaxy */ r = sqrt( x1 * x1 + y1 * y1 ); /* distance from centre */ cost1 = x1 / r; /* cosine of angle in plane of galaxy */ sint1 = y1 / r; /* sine of angle in plane of galaxy */ cost2 = cost1 * cost1; /* cosine squared */ sint2 = sint1 * sint1; /* sine squared */ return( vs + ( vc * cost1 + vr * sint1 ) * sini1 ); /* return to caller */ } /* * function derv calculates the partial derivatives with respect * to the parameters. */ void derv_c( float c[CLASSDIM] , /* grid position in plane of galaxy */ float p[MAXPAR] , /* parameters of ring */ float d[MAXPAR] , /* for partial derivatives */ fint *m , /* dummy variable */ fint *fopt ) /* option */ { float vc, vr; /* parameters of velocity field */ float x, y; /* sky coordinates */ float cost1, cost2, sint1, sint2, x1, y1, r; static float phi= 0.0, inc = 0.0; /* saved parameters */ static float cosp1 = 1.0, cosp2 = 1.0; static float sinp1 = 0.0, sinp2 = 0.0; static float cosi1 = 1.0, cosi2 = 1.0; static float sini1 = 0.0, sini2 = 0.0; vc = p[1]; /* circular velocity */ vr = p[2]; /* expansion velocity */ if (p[3] != phi) { /* new position angle ? */ phi = p[3]; /* position angle */ cosp1 = cos( F * phi ); /* cosine */ cosp2 = cosp1 * cosp1; /* cosine squared */ sinp1 = sin ( F * phi ); /* sine */ sinp2 = sinp1 * sinp1; /* sine squared */ } if (p[4] != inc) { /* new inclination ? */ inc = p[4]; /* inclination */ cosi1 = cos( F * inc ); /* cosine */ cosi2 = cosi1 * cosi1; /* cosine squared */ sini1 = sin ( F * inc ); /* sine */ sini2 = sini1 * sini1; /* sine squared */ } x = c[0] - p[5] * cdelt[0]; /* calculate x */ y = c[1] - p[6] * cdelt[1]; /* calculate y */ x1 = ( -x * sinp1 + y * cosp1 ); /* x in plane of galaxy */ y1 = ( -x * cosp1 - y * sinp1 ) / cosi1; /* y in plane of galaxy */ r = sqrt( x1 * x1 + y1 * y1 ); /* distance from centre */ cost1 = x1 / r; /* cosine of angle in plane of galaxy */ sint1 = y1 / r; /* sine of angle in plane of galaxy */ cost2 = cost1 * cost1; /* cosine squared */ sint2 = sint1 * sint1; /* sine squared */ d[0] = 1.0; /* partial derivative VSYS */ d[1] = sini1 * cost1; /* .................. VROT */ d[2] = sini1 * sint1; /* .................. VEXP */ /* .................. PA */ d[3] = F * vc * ( 1.0 - sini2 * sint2 ) * sint1 * sini1 / cosi1 - F * vr * ( 1.0 - sini2 * cost2 ) * cost1 * sini1 / cosi1; /* .................. INCL */ d[4] = F * vc * ( cosi2 - sini2 * sint2 ) * cost1 / cosi1 + F * vr * ( cosi2 + sini2 * cost2 ) * sint1 / cosi1; /* .................. XPOS */ d[5] = cdelt[0] * vc * ( sint1 * sinp1 - cost1 * cosp1 / cosi1 ) * sint1 * sini1 / r - cdelt[0] * vr * ( sint1 * sinp1 - cost1 * cosp1 / cosi1 ) * cost1 * sini1 / r; /* .................. YPOS */ d[6] = -cdelt[1] * vc * ( sint1 * cosp1 + cost1 * sinp1 / cosi1 ) * sint1 * sini1 / r + cdelt[1] * vr * ( sint1 * cosp1 + cost1 * sinp1 / cosi1 ) * cost1 * sini1 / r; } /* * getdat selects the data from the buffer and calculates differences. */ static fint getdat( float x[] , /* sky coords of pixels inside ring */ float y[] , /* radial velocities */ float w[] , /* weights of radial velocities */ float p[] , /* parameters of ring */ float ri , /* inner radius of ring */ float ro , /* outer radius of ring */ float *q , /* chi-squared */ fint nfr ) /* number of degrees of freedom */ { fint fopt; /* function option */ fint llo, lup, mlo, mup; /* corners */ fint l, m; /* counters */ fint n = 0; /* return value */ fint nlt, nmt; /* box sizes */ float phi, inc, x0, y0; /* define ellipse */ float free; /* free angle */ float cosp, cosi, sinp, sini; /* (co)sines */ float a, b; float wi; (*q) = 0.0; /* reset sigma */ phi = p[3] + mapphi; /* position angle plus map p.a. */ inc = p[4]; /* inclination */ x0 = p[5]; /* x-position of centre */ y0 = p[6]; /* y-position of centre */ free = fabs( sin( F * thetaf ) ); /* sine of free angle */ sinp = sin( F * phi ); /* sine of pa. */ cosp = cos( F * phi ); /* cosine of pa. */ sini = sin( F * inc ); /* sine of inc. */ cosi = cos( F * inc ); /* cosine of inc. */ a = sqrt( 1.0 - cosp * cosp * sini * sini ); b = sqrt( 1.0 - sinp * sinp * sini * sini ); llo = max( blo[0], nint( x0 - a * ro / cdelt[0] ) ); lup = min( bup[0], nint( x0 + a * ro / cdelt[0] ) ); mlo = max( blo[1], nint( y0 - b * ro / cdelt[1] ) ); mup = min( bup[1], nint( y0 + b * ro / cdelt[1] ) ); if ( ( llo > lup ) || ( mlo > mup ) ) { fint error_level = 4; error_c( &error_level, tofchar( "Ring not inside map!" ) ); } nlt = bup[0] - blo[0] + 1; /* number of pixels in X */ nmt = bup[1] - bup[1] + 1; /* number of pixels in Y */ for ( m = mlo; m < mup; m++) { float ry = cdelt[1] * m; /* Y position in plane of galaxy */ for ( l = llo; l < lup; l++) { float rx = cdelt[0] * l; /* X position in plane of galaxy */ float v; int ip; /* array pointer */ ip = ( m - blo[1] ) * nlt + l - blo[0]; v = vfield[ip]; /* radial velocity at this position */ if ( v != blank ) { float costh, r, theta, xr, yr; xr = ( - ( rx - cdelt[0] * x0 ) * sinp + ( ry - cdelt[1] * y0 ) * cosp ); yr = ( - ( rx - cdelt[0] * x0 ) * cosp - ( ry - cdelt[1] * y0 ) * sinp ) / cosi; r = sqrt( xr * xr + yr * yr ); /* distance from centre */ if ( r < 0.1 ) { /* radius to small ? */ theta = 0.0; } else { theta = atan2( yr, xr ) / F; } costh = fabs( cos ( F * theta ) ); if ( r > ri && r < ro && costh > free ) { /* point inside ring ? */ float xx[2]; int use = 0; wi = pow( costh, (double) wpow ); /* calculate weight of this point */ xx[0] = rx; /* x position */ xx[1] = ry; /* y position */ switch( side ) { /* which side of galaxy */ case 1: { /* receding half */ use = ( fabs( theta ) <= 90.0 ); break; } case 2: { /* approaching half */ use = ( fabs( theta ) >= 90.0 ); break; } case 3: { /* both halves */ use = 1; break; } default: { break; } } if ( use ) { /* load data point ? */ n += 1; /* increase */ if ( n < MAXPIXEL ) { /* buffers not full */ fint maxpar = MAXPAR; /* number of parms. */ float s, vz; vz = func_c( xx, p, &maxpar, &fopt ); s = v - vz; /* =========================================== */ outx[n]=rx; /* load x and y coord */ outy[n]=ry; /* in galaxy plane */ outth[n]=theta*F; /* theta in radians */ outres[n]=v; /* velocity at rx,ry */ outHI[n]=HIfield[ip]; /* total HI at rx ry */ outwei[n]=1./wi; /* sigma */ /* =========================================== */ x[2*n-2] = rx; /* load X-coordinate */ x[2*n-1] = ry; /* load Y-coordinate */ y[n-1] = v; /* load radial velocity */ /* =========================================== */ w[n-1] = wi; /* load weight */ (*q) += s * s * wi; /* calculate chi-squared */ /* =========================================== */ } } } } } } if ( n > MAXPIXEL ) { char m[80]; fint error_level = 1; sprintf( m, "Too many points in ring (%d); Maximum is %d", n, MAXPIXEL ); error_c( &error_level, tofchar( m ) ); n = MAXPIXEL; } if ( n > nfr ) { /* enough data points ? */ (*q) = sqrt( (*q) / (float) ( n - nfr ) );/* calculate sigma */ } else { /* no free parameters */ (*q) = FLT_MAX; } return( n ); /* return to caller */ } /* =========================================== */ /* Function fbasis * * function fbasis returns values of basisfunctions * in the point th */ void fbasis ( float th, /* angle theta in radians of pnt in velfield */ float hb[], /* array with values of each basis function in theta */ int mba) /* total number of basis functions */ { int j; hb[1] = 1.0; for (j=2;j<=mba;j++) { /* loop over all harmonic terms */ if (j%2 != 0) hb[j] = sin(((j-1.0)/2.0)*th); else { hb[j] = cos((j/2.0)*th); } } } /* =========================================== */ /* * function: rotfit * * This function does a least squares fit to the radial velocity field. */ static fint rotfit( float ri , /* inner radius of ring */ float ro , /* outer radius of ring */ float p[] , /* estimated/fitted parameters */ float e[] , /* errors in parameters */ fint *n , /* nr of points in the fit */ float *q ) /* chi-squared */ { static char *fmt[MAXPAR] = { "%9.2f", "%9.2f", "%10.2f", "%9.2f", "%7.2f", "%9.2f", "%9.2f" }; static char *hed1[MAXPAR] = { " systemic", " rotation", " expansion", " position", " incli-", " x-centre", " y-centre" }; static char *hed2[MAXPAR] = { " velocity", " velocity", " velocity", " angle ", " nation", " position", " position" }; char fb[MAXMESLEN]; /* format buffer */ char mess[MAXMESLEN]; /* buffer for messages */ fint error_level = 1; /* level of error */ fint fopt; /* function option */ fint h, i, j, xi; /* counters */ fint ier = 0; /* error return */ fint nfr; /* number of free parameters */ fint nrt; /* return code from lsqfit */ fint output_level = 3; /* level of output */ fint stop; /* stop ? */ fint t = 50; /* max. number of iterations */ float b[MAXPAR]; /* partial derivatives */ float chi; /* old chi-squared */ float df[MAXPAR]; /* difference vector */ float eps[MAXPAR]; /* contains stop criterium */ float flip; /* direction */ float lab = 0.001; /* mixing parameter */ float pf[MAXPAR]; /* intermediate results */ float r; /* mean radius of ring */ float x[2*MAXPIXEL]; /* (x,y) */ float y[MAXPIXEL]; /* f(x,y) */ float w[MAXPIXEL]; /* w(x,y) */ /* =========================================== */ float fit[MAXFITDEG]; /* result of harmonic fit */ float ww[MAXFITDEG]; /* weight of parameters */ float chisq; /* chisquare of harmonic fit */ float **u; /* matrix */ float **v; float **cvam; /* covariance matrix */ void svdfit(); /* the fitroutine */ void sort2(); /* Heapsort */ float **matrix(); /* allocates memory for a matrix */ void free_matrix(); /* destroys matrix */ float sini,sini2,cosi,dgamma,sysv,errsys,rotv,errrot; fint nwrite; fint tid=0; /* =========================================== */ for ( nfr = 0, i = 0; i < MAXPAR; i++ ) { eps[i] = 0.1; /* convergence criterium */ nfr += mask[i]; } r = 0.5 * ( ri + ro ); /* mean radius of ring */ sprintf( mess, "working on radius: %7.2f arcsec", r ); status_c( tofchar( mess ) ); sprintf( mess, " radius of ring: %7.2f arcsec", r ); anyout_c( &output_level, tofchar( mess ) ); strcpy( mess, " iter." ); for ( j = 0; j < MAXPAR; j++ ) { if (mask[j]) strcat( mess, hed1[j] ); } strcat( mess, " points sigma" ); anyout_c( &output_level, tofchar( mess ) ); strcpy( mess, " number" ); for ( j = 0; j < MAXPAR; j++ ) { if (mask[j]) strcat( mess, hed2[j] ); } strcat( mess, " velocity" ); anyout_c( &output_level, tofchar( mess ) ); h = 0; /* reset iteration counter */ (*n) = getdat( x, y, w, p, ri, ro, q, nfr ); sprintf( mess, "%7d", h ); for ( j = 0; j < MAXPAR; j++ ) { if (mask[j]) { sprintf( fb, fmt[j], (double) p[j] ); strcat( mess, fb ); } } sprintf( fb, "%7d %#9.3g", (int) (*n), (double) (*q) ); strcat( mess, fb ); anyout_c( &output_level, tofchar( mess ) ); stop = 0; do { /* start of loop */ fint npar = MAXPAR; /* number of parameters */ fint xdim = 2; /* function is two-dimensional */ h += 1; /* next iteration */ chi = (*q); /* save chi-squared */ for ( i = 0; i < MAXPAR; i++ ) { /* loop to save initial estimates */ pf[i] = p[i]; } nrt = lsqfit_c( x, &xdim, y, w, n, pf, e, mask, &npar, &tol, &t, &lab, &fopt ); if (nrt < 0 ) break; /* stop because of error */ for ( i = 0; i < MAXPAR; i++ ) { /* calculate difference vector */ df[i] = pf[i] - p[i]; } flip = 1.0; /* factor for inner loop */ while (1) { /* inner loop */ for ( i = 0; i < MAXPAR; i++ ) { /* calculate new parameters */ pf[i] = flip * df[i] + p[i]; } if ( pf[4] > 90.0 ) pf[4] -= 180.0; /* in case inclination > 90 */ (*n) = getdat( x, y, w, pf, ri, ro, q, nfr ); if ( (*q) < chi ) { /* better fit */ sprintf( mess, "%7d", h ); for ( j = 0; j < MAXPAR; j++ ) { if (mask[j]) { sprintf( fb, fmt[j], (double) pf[j] ); strcat( mess, fb ); } } sprintf( fb, "%7d %#9.3g", (int) (*n), (double) (*q) ); strcat( mess, fb ); anyout_c( &output_level, tofchar( mess ) ); for ( i = 0; i < MAXPAR; i++ ) { /* save new parameters */ p[i] = pf[i]; } break; /* leave inner loop */ } else { if ( (2 * h) > t ) { for ( stop = 1, i = 0; i < MAXPAR; i++ ) { stop = ( stop && ( fabs( flip * df[i] ) < eps[i] ) ); } } else { stop = ( ( fabs( (*q) - chi ) / chi ) < tol ); } if (stop) { (*q) = chi; break; } } if ( flip > 0.0 ) { flip *= -1.0; } else { flip *= -0.5; } } } while ( !stop && h < t ); /* * find out why we quit fitting. */ if (stop) { /* good fit */ ier = h; /* number of big loops */ } else if ( nrt < 0 ) { /* error from lsqfit */ ier = nrt; } else if ( h == t ) { /* max. number of iterations */ ier = -4; } switch( ier ) { case -1: { error_c( &error_level, tofchar( "reswri: -1 Too many free parameters!" ) ); break; } case -2: { error_c( &error_level, tofchar( "reswri: -2 No free parameters!" ) ); break; } case -3: { error_c( &error_level, tofchar( "reswri: -3 Not enough degrees of freedom!" ) ); break; } case -4: { error_c( &error_level, tofchar( "reswri: -4 Maximum number of iterations too small!" ) ); break; } case -5: { error_c( &error_level, tofchar( "reswri: -5 Diagonal of matrix contains zeroes!" ) ); break; } case -6: { error_c( &error_level, tofchar( "reswri: -6 Det. of the coeff. matrix is zero!" ) ); break; } case -7: { error_c( &error_level, tofchar( "reswri: -7 Square root of negative number!" ) ); break; } default: { sprintf( mess, "%7d", h ); for ( j = 0; j < MAXPAR; j++ ) { if (mask[j]) { sprintf( fb, fmt[j], (double) p[j] ); strcat( mess, fb ); } } sprintf( fb, "%7d %#9.3g", (int) (*n), (double) (*q) ); strcat( mess, fb ); anyout_c( &output_level, tofchar( mess ) ); break; } } /* * calculate ellipse parameters. */ if ( ier == 1 && cor[0] > -1 && cor[1] > -1 ) { fint i; fint maxpar = MAXPAR; /* max. number of parms. */ float a11 = 0.0; float a12 = 0.0; float a22 = 0.0; float sigma2 = 0.0; for ( i = 0; i < (*n); i++ ) { derv_c( &x[2*i], p, b, &maxpar, &fopt ); /* calculate derivatives */ a11 = a11 + w[i] * b[cor[0]] * b[cor[0]]; a22 = a22 + w[i] * b[cor[1]] * b[cor[1]]; a12 = a12 + w[i] * b[cor[0]] * b[cor[1]]; sigma2 = sigma2 + w[i] * pow( y[i] - func_c( &x[2*i], p, &maxpar, &fopt), 2.0 ); } sigma2 = sigma2 / (float) (*n); elp4[0] = a11; elp4[1] = a12; elp4[2] = a22; elp4[3] = sigma2; } /* ================================================================================= */ /* Go and do the first harmonic fit for vsys and vrot*/ sini = sin (p[4]*F); /* sine inclination */ sini2 = sini*sini; /* sine inclination squared */ cosi = cos (p[4]*F); sort2((*n),outth,outres,outwei,outx,outy,outHI); /* Call Heapsort in order to sort the data according to increasing theta */ /* Subtract vsys and vrot from data */ sysv = p[0]; /* save these parameters for addition to 2nd fit */ rotv = p[1]*sini; errsys = e[0]; errrot = e[1]; for (xi=1;xi<=(*n);xi++) { outres[xi] -= (sysv + rotv*cos(outth[xi])); /* subtract systemic and rotational velocity */ } /* Now do the second fit */ u = matrix(1,(*n),1,fitdeg); /* first create neccesary martices */ v = matrix(1,fitdeg,1,fitdeg); cvam = matrix(1,(*n),1,(*n)); svdfit(outth,outres,outwei,(*n),fit,fitdeg,u,v,ww,cvam,&chisq,(void(*)())fbasis); fit[1] += sysv; fit[2] += rotv; for(xi=1;xi<=(*n);xi++){ /* Calculate residual field of residual field */ outres[xi] += (sysv + rotv*cos(outth[xi])); outres[xi] -= (fit[1] + fit[2]*cos(outth[xi])); for (i=3;i<=fitdeg;i++) { if (i%2 != 0) outres[xi] -= fit[i]*sin( ((i-1.0)/2.0) * outth[xi]); else { outres[xi] -= fit[i]*cos( (i/2.0)*outth[xi]); } } outmat[(int)((outy[xi]/cdelt[1])+0.5)][(int)((outx[xi]/cdelt[0])+0.5)]=outres[xi]; } /* outmat will be used as outputset */ for (i=2;i<=fitdeg;i++){ fit[i] = fit[i] / sini; /* correct fitted par. for inclination */ cvam[i][i] = (cvam[i][i]/ sini2)*(chisq / ( (*n)-fitdeg )); } cvam[1][1] = cvam[1][1]*chisq / ((*n)-fitdeg); /* Write to screen and file */ anyoutf(1,"vsys %g %g \n",fit[1],sqrt(cvam[1][1])); for (i=2;i<=fitdeg;i++){ if (i%2 != 0) anyoutf(1,"sin %g %g %g",(i-1.0)/2.0,fit[i],sqrt(cvam[i][i])); else { anyoutf(1,"cos %g %g %g",i/2.0,fit[i],sqrt(cvam[i][i])); } } fprintf(mp,"%g ",r); /* output to outputfile */ for (xi=1 ; xi<=fitdeg ; xi++) { fprintf(mp,"%g %g ",fit[xi],sqrt(cvam[xi][xi])); } fprintf(mp,"\n"); free_matrix(u,1,(*n),1,fitdeg); /* Destroy the matrices */ free_matrix(v,1,fitdeg,1,fitdeg); free_matrix(cvam,1,(*n),1,(*n)); /* Now do the fit to the total HI field */ if (yesinset2) { u = matrix(1,(*n),1,fitdeg); /* first create neccesary martices */ v = matrix(1,fitdeg,1,fitdeg); cvam = matrix(1,(*n),1,(*n)); svdfit(outth,outHI,outwei,(*n),fit,fitdeg,u,v,ww,cvam,&chisq,(void(*)())fbasis); for (i=1;i<=fitdeg;i++){ /* correct error estimates */ cvam[i][i] = (cvam[i][i])*(chisq / ( (*n)-fitdeg )); } /* Write to screen and file */ anyoutf(1,"average %g %g \n",fit[1],sqrt(cvam[1][1])); for (i=2;i<=fitdeg;i++) { if (i%2 != 0) anyoutf(1,"sin %g %g %g",(i-1.0)/2.0,fit[i],sqrt(cvam[i][i])); else anyoutf(1,"cos %g %g %g",i/2.0,fit[i],sqrt(cvam[i][i])); } fprintf(hicof,"%g ",r); for (xi=1 ; xi<=fitdeg ; xi++) { fprintf(hicof,"%g %g ",fit[xi],sqrt(cvam[xi][xi])); } fprintf(hicof,"\n"); free_matrix(u,1,(*n),1,fitdeg); /* Destroy the matrices */ free_matrix(v,1,fitdeg,1,fitdeg); free_matrix(cvam,1,(*n),1,(*n)); } return( ier ); /* return to caller */ } /* =========================================================================== */ void sort2( int n, float *ra, float *rb, float *rc, float *rd, float *re, float *rf ) { int l,j,ir,i; float rrf,rre,rrd,rrc,rrb,rra; l=(n >> 1)+1; ir=n; for (;;) { if (l > 1) { rra=ra[--l]; rrb=rb[l]; rrc=rc[l]; rrd=rd[l]; rre=re[l]; rrf=rf[l]; } else { rra=ra[ir]; rrb=rb[ir]; rrc=rc[ir]; rrd=rd[ir]; rre=re[ir]; rrf=rf[ir]; ra[ir]=ra[1]; rb[ir]=rb[1]; rc[ir]=rc[1]; rd[ir]=rd[1]; re[ir]=re[1]; rf[ir]=rf[1]; if (--ir == 1) { ra[1]=rra; rb[1]=rrb; rc[1]=rrc; rd[1]=rrd; re[1]=rre; rf[1]=rrf; return; } } i=l; j=l << 1; while (j <= ir) { if (j < ir && ra[j] < ra[j+1]) ++j; if (rra < ra[j]) { ra[i]=ra[j]; rb[i]=rb[j]; rc[i]=rc[j]; rd[i]=rd[j]; re[i]=re[j]; rf[i]=rf[j]; j += (i=j); } else j=ir+1; } ra[i]=rra; rb[i]=rrb; rc[i]=rrc; rd[i]=rrd; re[i]=rre; rf[i]=rrf; } } /* =========================================================================== */ /* ============================================================================*/ /* ----------------------start of numerical recipes subroutines ---------------*/ /* ============================================================================*/ void svbksb(float **u, float w[], float **v, int m, int n, float b[],float x[]) { int jj,j,i; float s,*tmp,*vector(); void free_vector(); tmp=vector(1,n); for (j=1;j<=n;j++) { s=0.0; if (w[j]) { for (i=1;i<=m;i++) s += u[i][j]*b[i]; s /= w[j]; } tmp[j]=s; } for (j=1;j<=n;j++) { s=0.0; for (jj=1;jj<=n;jj++) s += v[j][jj]*tmp[jj]; x[j]=s; } free_vector(tmp,1,n); } void svdvar(float **v , int ma , float w[] , float **cvm) { int k,j,i; float sum,*wti,*vector(); void free_vector(); wti=vector(1,ma); for (i=1;i<=ma;i++) { wti[i]=0.0; if (w[i]) wti[i]=1.0/(w[i]*w[i]); } for (i=1;i<=ma;i++) { for (j=1;j<=i;j++) { for (sum=0.0,k=1;k<=ma;k++) sum += (v[i][k]*v[j][k]*wti[k]); cvm[j][i]=cvm[i][j]=sum; } } free_vector(wti,1,ma); } #define TOL 1.0e-5 void svdfit( float *x, float *y, float *sig, int ndata, float *a, int ma, float **u, float **v, float *w, float **cvm, float *chisq, void (*funcs)(float,float *,int) ) { int j,i; float sini,wmax,tmp,thresh,sum,*b,*afunc,*vector(); void svdksb(float **u,float w[],float **v, int m, int n, float b[],float x[]); void svdcmp(float **a,int m,int n, float w[], float **v); void free_vector(); b=vector(1,ndata); afunc=vector(1,ma); for (i=1;i<=ndata;i++) { (*funcs)(x[i],afunc,ma); tmp=1.0/sig[i]; for (j=1;j<=ma;j++) { u[i][j]=afunc[j]*tmp; } b[i]=y[i]*tmp; } svdcmp(u,ndata,ma,w,v); wmax=0.0; for (j=1;j<=ma;j++) if (w[j] > wmax) wmax=w[j]; thresh=TOL*wmax; for (j=1;j<=ma;j++) { if (w[j] < thresh) { w[j]=0.0; anyoutf(1,"WARNING : SVDFIT detected singular value in fit !"); } } svbksb(u,w,v,ndata,ma,b,a); *chisq=0.0; for (i=1;i<=ndata;i++) { (*funcs)(x[i],afunc,ma); for (sum=0.0,j=1;j<=ma;j++) sum += a[j]*afunc[j]; *chisq += (tmp=(y[i]-sum)/sig[i],tmp*tmp); } free_vector(afunc,1,ma); free_vector(b,1,ndata); svdvar(v,ma,w,cvm); } #undef TOL static float at,bt,ct; #define PYTHAG(a,b) ((at=fabs(a)) > (bt=fabs(b)) ? \ (ct=bt/at,at*sqrt(1.0+ct*ct)) : (bt ? (ct=at/bt,bt*sqrt(1.0+ct*ct)): 0.0)) static float maxarg1,maxarg2; #define MAX(a,b) (maxarg1=(a),maxarg2=(b),(maxarg1) > (maxarg2) ?\ (maxarg1) : (maxarg2)) #define SIGN(a,b) ((b) >= 0.0 ? fabs(a) : -fabs(a)) void svdcmp(float **a,int m,int n,float w[],float **v) { int flag,i,its,j,jj,k,l,nm; float c,f,h,s,x,y,z; float anorm=0.0,g=0.0,scale=0.0; float *rv1,*vector(); void nrerror(),free_vector(); if (m < n) nrerror("SVDCMP: You must augment A with extra zero rows"); rv1=vector(1,n); for (i=1;i<=n;i++) { l=i+1; rv1[i]=scale*g; g=s=scale=0.0; if (i <= m) { for (k=i;k<=m;k++) scale += fabs(a[k][i]); if (scale) { for (k=i;k<=m;k++) { a[k][i] /= scale; s += a[k][i]*a[k][i]; } f=a[i][i]; g = -SIGN(sqrt(s),f); h=f*g-s; a[i][i]=f-g; if (i != n) { for (j=l;j<=n;j++) { for (s=0.0,k=i;k<=m;k++) s += a[k][i]*a[k][j]; f=s/h; for (k=i;k<=m;k++) a[k][j] += f*a[k][i]; } } for (k=i;k<=m;k++) a[k][i] *= scale; } } w[i]=scale*g; g=s=scale=0.0; if (i <= m && i != n) { for (k=l;k<=n;k++) scale += fabs(a[i][k]); if (scale) { for (k=l;k<=n;k++) { a[i][k] /= scale; s += a[i][k]*a[i][k]; } f=a[i][l]; g = -SIGN(sqrt(s),f); h=f*g-s; a[i][l]=f-g; for (k=l;k<=n;k++) rv1[k]=a[i][k]/h; if (i != m) { for (j=l;j<=m;j++) { for (s=0.0,k=l;k<=n;k++) s += a[j][k]*a[i][k]; for (k=l;k<=n;k++) a[j][k] += s*rv1[k]; } } for (k=l;k<=n;k++) a[i][k] *= scale; } } anorm=MAX(anorm,(fabs(w[i])+fabs(rv1[i]))); } for (i=n;i>=1;i--) { if (i < n) { if (g) { for (j=l;j<=n;j++) v[j][i]=(a[i][j]/a[i][l])/g; for (j=l;j<=n;j++) { for (s=0.0,k=l;k<=n;k++) s += a[i][k]*v[k][j]; for (k=l;k<=n;k++) v[k][j] += s*v[k][i]; } } for (j=l;j<=n;j++) v[i][j]=v[j][i]=0.0; } v[i][i]=1.0; g=rv1[i]; l=i; } for (i=n;i>=1;i--) { l=i+1; g=w[i]; if (i < n) for (j=l;j<=n;j++) a[i][j]=0.0; if (g) { g=1.0/g; if (i != n) { for (j=l;j<=n;j++) { for (s=0.0,k=l;k<=m;k++) s += a[k][i]*a[k][j]; f=(s/a[i][i])*g; for (k=i;k<=m;k++) a[k][j] += f*a[k][i]; } } for (j=i;j<=m;j++) a[j][i] *= g; } else { for (j=i;j<=m;j++) a[j][i]=0.0; } ++a[i][i]; } for (k=n;k>=1;k--) { for (its=1;its<=30;its++) { flag=1; for (l=k;l>=1;l--) { nm=l-1; if (fabs(rv1[l])+anorm == anorm) { flag=0; break; } if (fabs(w[nm])+anorm == anorm) break; } if (flag) { c=0.0; s=1.0; for (i=l;i<=k;i++) { f=s*rv1[i]; if (fabs(f)+anorm != anorm) { g=w[i]; h=PYTHAG(f,g); w[i]=h; h=1.0/h; c=g*h; s=(-f*h); for (j=1;j<=m;j++) { y=a[j][nm]; z=a[j][i]; a[j][nm]=y*c+z*s; a[j][i]=z*c-y*s; } } } } z=w[k]; if (l == k) { if (z < 0.0) { w[k] = -z; for (j=1;j<=n;j++) v[j][k]=(-v[j][k]); } break; } if (its == 30) nrerror("No convergence in 30 SVDCMP iterations"); x=w[l]; nm=k-1; y=w[nm]; g=rv1[nm]; h=rv1[k]; f=((y-z)*(y+z)+(g-h)*(g+h))/(2.0*h*y); g=PYTHAG(f,1.0); f=((x-z)*(x+z)+h*((y/(f+SIGN(g,f)))-h))/x; c=s=1.0; for (j=l;j<=nm;j++) { i=j+1; g=rv1[i]; y=w[i]; h=s*g; g=c*g; z=PYTHAG(f,h); rv1[j]=z; c=f/z; s=h/z; f=x*c+g*s; g=g*c-x*s; h=y*s; y=y*c; for (jj=1;jj<=n;jj++) { x=v[jj][j]; z=v[jj][i]; v[jj][j]=x*c+z*s; v[jj][i]=z*c-x*s; } z=PYTHAG(f,h); w[j]=z; if (z) { z=1.0/z; c=f*z; s=h*z; } f=(c*g)+(s*y); x=(c*y)-(s*g); for (jj=1;jj<=m;jj++) { y=a[jj][j]; z=a[jj][i]; a[jj][j]=y*c+z*s; a[jj][i]=z*c-y*s; } } rv1[l]=0.0; rv1[k]=f; w[k]=x; } } free_vector(rv1,1,n); } #undef SIGN #undef MAX #undef PYTHAG #define NR_END 1 #define FREE_ARG char* void nrerror(char error_text[]) { fprintf(stderr,"Runtime ERROR in Numerical Recipes routine...\n"); fprintf(stderr,"%s\n",error_text); fprintf(stderr,"exiting system \n"); exit(1); } float *vector(long nl, long nh) { float *v; v=(float *)malloc((size_t) ((nh-nl+1+NR_END)*sizeof(float))); if (!v) nrerror("allocation failure in vector()"); return v-nl+NR_END; } void free_vector(float *v, long nl , long nh) { free((FREE_ARG) (v+nl-NR_END)); } float **matrix(long nrl, long nrh, long ncl, long nch) { long i, nrow=nrh-nrl+1,ncol=nch-ncl+1; float **m; m=(float **) malloc((size_t)((nrow+NR_END)*sizeof(float*))); if (!m) nrerror("aloccation failure 1 in matrix()"); m += NR_END; m -= nrl; m[nrl] = (float *) malloc((size_t)((nrow*ncol+NR_END)*sizeof(float))); if (!m[nrl]) nrerror("allocation failure 2 in matrix()"); m[nrl] += NR_END; m[nrl] -= ncl; for(i=nrl+1;i<=nrh;i++) m[i] = m[i-1]+ncol; return m; } void free_matrix(float **m,long nrl, long nrh, long ncl, long nch) { free((FREE_ARG)(m[nrl]+ncl-NR_END)); free((FREE_ARG)(m+nrl-NR_END)); } static bool usercont( fchar Keyword, char *message, bool def, fint dfault) /*-------------------------------------------------------------*/ /* PURPOSE: Ask user confirmation to continue. */ /*-------------------------------------------------------------*/ { bool cont; fint r1; fint nitems; cont = toflog( def ); nitems = 1; r1 = userlog_c( &cont, &nitems, &dfault, Keyword, tofchar( message ) ); cancel_c( Keyword ); cont = tobool( cont ); return( cont ); } /* ============================================================================*/ /* ------------------End of numerical recipes subroutines----------------------*/ /* ============================================================================*/ MAIN_PROGRAM_ENTRY { init_c( ); /* contact HERMES */ IDENTIFICATION( "reswri", VERSION ); /* our id */ fmake( set, bset ); /* make fchar */ fmake( set2, bset2 ); /* make fchar */ setfblank_c( &blank ); /* get system blank */ /* * First we need the set (and subset) which contains the velocity field, * and the box which includes the data. Then we check whether the * axis units are correct (should be convertable to arcsecs) and * the map units. */ Coeff.a = coeffb; Coeff.l = 255; Hicof.a = hicofb; Hicof.l = 255; { char bbunit[MAXFITSLEN+1]; char descriptor[MAXFITSLEN+1]; /* buffer for descriptor name */ fchar bunit; fint axcount[MAXAXES]; /* axis sizes */ fint axperm[MAXAXES]; /* axis permutation */ fint box_mode = 0; /* mode for gdsbox */ fint class = CLASS; /* class of programme */ fint classdim = CLASSDIM; /* dimension of subset */ fint default_level = 0; /* no default */ fint error_level = 4; /* fatal error */ fint gerror = 0; /* GDS error return */ fint i; /* loop counter */ fint maxaxes = MAXAXES; /* max. number of axes */ fint maxsub = 1; /* max. number of subsets */ fint output_level = 11; /* level of output */ fint tcount = 0; /* add ax types */ fint hidden = 2; fint nsub; fmake( bunit, bbunit ); (void) gdsinp_c( set, &subset, &maxsub, &default_level, KEY_INSET, MES_INSET, &output_level, axperm, axcount, &maxaxes, &class, &classdim ); nsub = gdsinp_c( set2, &subset2, &maxsub, &hidden, KEY_INSET2, MES_INSET2, &output_level, axperm, axcount, &maxaxes, &class, &classdim ); yesinset2 = (nsub > 0); default_level = 1; /* default level for box */ gdsbox_c( blo, bup, set, &subset, &default_level, KEY_BOX, MES_BOX, &output_level, &box_mode ); /* * Now we create the buffer for the velocity field and read in the * Radial velocities. */ { fint cwlo, cwhi; /* coordinate words */ fint ndone; /* number of points read */ fint npoints; /* size of buffer */ fint tid = 0; /* transfer identifier */ npoints = ( bup[1] - blo[1] + 1 ) * ( bup[0] - blo[0] + 1 ); vfield = calloc( sizeof( float ), npoints ); HIfield = calloc( sizeof( float ), npoints ); if ( vfield == NULL || HIfield==NULL) { fint error_level = 4; /* fatal error */ error_c( &error_level, tofchar( "Error allocating buffer space!" ) ); } cwlo = gdsc_fill_c( set, &subset, blo ); cwhi = gdsc_fill_c( set, &subset, bup ); gdsi_read_c( set, &cwlo, &cwhi, vfield, &npoints, &ndone, &tid ); if (yesinset2) { cwlo = gdsc_fill_c( set2, &subset2, blo ); cwhi = gdsc_fill_c( set2, &subset2, bup ); gdsi_read_c( set2, &cwlo, &cwhi, HIfield, &npoints, &ndone, &tid ); } } /* Get outputset */ { fint class = CLASS; fint input_level=1; fint items=1; fint maxaxes=MAXAXES; fint output_level=11; fint r; gdsasn_c(KEY_INSET,KEY_OUTSET,&class); outwri = (int) gdsout_c(oset,&osubset,&items,&input_level,KEY_OUTSET, MES_OUTSET,&output_level,oaxperm,oaxsize,&maxaxes); if (outwri) { ocwlo = gdsc_fill_c(oset,&osubset,blo); ocwup = gdsc_fill_c(oset,&osubset,bup); } } for ( i = 0; i < CLASSDIM; i++ ) { char bctype[MAXFITSLEN+1]; char bcunit1[MAXFITSLEN+1]; char bcunit2[MAXFITSLEN+1]; char bdunit[MAXFITSLEN+1]; fchar ctype, cunit, cunit1, cunit2, dunit; fint axnum = axperm[i]; fint axtyp; fint level = 0; fint skysys, prosys, velsys; fmake( ctype, bctype ); fmake( cunit1, bcunit1 ); fmake( cunit2, bcunit2 ); fmake( dunit, bdunit ); gdsc_name_c( ctype, set, &axnum, &gerror ); axtyp = axtype_c( ctype, cunit1, dunit, &skysys, &prosys, &velsys ); switch( axtyp ) { case 2: { /* Latitude (get rotation) */ sprintf( descriptor, "CROTA%d", axnum ); gerror = 0; gdsd_rdble_c( set, tofchar( descriptor ), &level, &mapphi, &gerror ); if (gerror) { mapphi = 0.0; } } case 1: { /* get cdelt in arcsec */ sprintf( descriptor, "CUNIT%d", axnum ); gerror = 0; gdsd_rchar_c( set, tofchar( descriptor ), &level, cunit2, &gerror ); if (gerror) { cunit = cunit1; } else { cunit = cunit2; } sprintf( descriptor, "CDELT%d", axnum ); gerror = 0; gdsd_rdble_c( set, tofchar( descriptor ), &level, &cdelt[i], &gerror ); if (gerror) { error_c( &error_level, tofchar( "No gridseparation found!" ) ); } else { double f; (void) factor_c( cunit, tofchar( "ARCSEC" ), &f ); cdelt[i] *= f; } cdelt[i] = fabs( cdelt[i] ); /* make positive */ break; } default: { axtyp = 0; break; } } tcount += axtyp; } if (tcount != 3) { error_c( &error_level, tofchar( "No Longitude & Latitude axes pair!" ) ); } sprintf( descriptor, "BUNIT" ); gerror = 0; gdsd_rchar_c( set, tofchar( descriptor ), &subset, bunit, &gerror ); if (gerror < 0) { fint items = 1; default_level = 1; strcpy( bunit.a, "KM/S" ); for ( i = strlen( bunit.a ); i < MAXFITSLEN; i++) { bunit.a[i] = ' '; } (void) userchar_c( bunit, &items, &default_level, KEY_BUNIT, MES_BUNIT ); gerror = 0; gdsd_wchar_c( set, tofchar( descriptor ), &subset, bunit, &gerror ); } if (factor_c( bunit, tofchar( "KM/S" ), &mapfac )) { error_c( &error_level, tofchar( "BUNIT not convertable to KM/S!" ) ); } } /* * Now we need concentric rings and the initial parameters. * If we already have made a run of the programme, we must have a table * which contains the results of the previous run. In the future, we * will make use of that information. */ { fint count; /* input counter */ fint i; /* loop counter */ fint input_level = 0; /* no default */ fint items = MAXRING; /* max. number of radii */ double cpos[CLASSDIM]; /* central position */ nrad = userreal_c( rads, &items, &input_level, KEY_RADII, MES_RADII ); items = userreal_c( wids, &nrad, &input_level, KEY_WIDTHS, MES_WIDTHS ); for ( i = items; i < nrad; i++ ) wids[i] = wids[i-1]; items = 1; (void) userreal_c( &vsysi, &items, &input_level, KEY_VSYS, MES_VSYS ); items = 0; input_level = 0; /* no default */ do { fint ninp = nrad - items; /* number of inputs */ if (items) cancel_c( KEY_VROT ); /* cancel keyword */ count = userreal_c( &vroti[items], &ninp, &input_level, KEY_VROT, MES_VROT ); input_level = 1; /* default allowed */ items += count; /* number of entries */ } while (count && items < nrad); /* loop control */ for ( i = items; i < nrad; i++ ) vroti[i] = vroti[i-1]; items = 0; input_level = 1; /* default */ vexpi[0] = 0.0; /* 0.0 is default */ do { fint ninp = nrad - items; /* number of inputs */ if (items) cancel_c( KEY_VEXP ); /* cancel keyword */ count = userreal_c( &vexpi[items], &ninp, &input_level, KEY_VEXP, MES_VEXP ); input_level = 1; /* default allowed */ items += count; /* number of entries */ } while (count && items < nrad); /* loop control */ for ( i = ( items ? items : 1 ); i < nrad; i++ ) vexpi[i] = vexpi[i-1]; items = 0; input_level = 0; /* no default */ do { fint ninp = nrad - items; /* number of inputs */ if (items) cancel_c( KEY_PA ); /* cancel keyword */ count = userreal_c( &posai[items], &ninp, &input_level, KEY_PA, MES_PA ); input_level = 1; /* default allowed */ items += count; /* number of entries */ } while (count && items < nrad); /* loop control */ for ( i = items; i < nrad; i++ ) posai[i] = posai[i-1]; items = 0; input_level = 0; /* no default */ do { fint ninp = nrad - items; /* number of inputs */ if (items) cancel_c( KEY_INCL ); /* cancel keyword */ count = userreal_c( &incli[items], &ninp, &input_level, KEY_INCL, MES_INCL ); input_level = 1; /* default allowed */ items += count; /* number of entries */ } while (count && items < nrad); /* loop control */ for ( i = items; i < nrad; i++ ) incli[i] = incli[i-1]; items = 1; (void) gdspos_c( cpos, &items, &input_level, KEY_CENTRE, MES_CENTRE, set, &subset ); xposi = cpos[0]; yposi = cpos[1]; thetaf = 0.0; (void) userreal_c( &thetaf, &items, &input_level, KEY_FREEANGLE, MES_FREEANGLE ); } /* * Next we enable the user to choose one (or more) out of several * options. */ { char inputbuf[MAXOPT*MAXLEN]; char listbuf[MAXOPT*MAXLEN]; fchar input[MAXOPT]; fchar list[MAXOPT]; fint error_level = 4; fint input_level; fint items; fint nfixed; fint ninp; fint nlist; int i; for (i = 0; i < MAXOPT; i++) { input[i].a = &inputbuf[i*MAXLEN]; list[i].a = &listbuf[i*MAXLEN]; input[i].l = MAXLEN; list[i].l = MAXLEN; } fcopy( input[0], "BOTH" ); fcopy( list[0], "RECEDING" ); fcopy( list[1], "APPROACHING" ); fcopy( list[2], "BOTH" ); input_level = 1; items = 1; nlist = 3; ninp = usercharu_c( input[0], &items, &input_level, KEY_SIDE, MES_SIDE ); side = match_c( list[0], &nlist, input[0] ); /* * side = 1 ==> receding, * 2 ==> approaching, * 3 ==> both; * */ if ( side < 1 || side > 3 ) { error_c( &error_level, tofchar( "WRONG side of Galaxy!" ) ); } fcopy( input[0], "UNIFORM" ); fcopy( list[0], "UNIFORM" ); fcopy( list[1], "COSINE" ); fcopy( list[2], "COS-SQUARED" ); input_level = 1; items = 1; nlist = 3; ninp = usercharu_c( input[0], &items, &input_level, KEY_WEIGHT, MES_WEIGHT ); nlist = 3; switch( match_c( list[0], &nlist, input[0] ) ) { case 1: { wpow = 0; break; } case 2: { wpow = 1; break; } case 3: { wpow = 2; break; } default: { error_c( &error_level, tofchar( "WRONG weighting function!" ) ); break; } } fcopy( list[0], "VSYS" ); fcopy( list[1], "VROT" ); fcopy( list[2], "VEXP" ); fcopy( list[3], "PA" ); fcopy( list[4], "INCL" ); fcopy( list[5], "XPOS" ); fcopy( list[6], "YPOS" ); nlist = 7; items = 7; for ( i = 0; i < MAXPAR; mask[i++] = 1 ); /* reset */ ninp = userchar_c( input[0], &items, &input_level, KEY_FIXED, MES_FIXED ); for ( i = 0; i < ninp; i++ ) { fint im = match_c( list[0], &nlist, input[i] ); if ( im > 0 ) mask[im-1] = 0; } /* * We allow only fitting of systemic velocity and centre position * when both halves of the galaxy are used. */ if ( side != 3 ) { mask[0] = mask[5] = mask[6] = 0; } /* * Count the number of fixed parameters. */ for ( nfixed = 0, i = 0; i < MAXPAR; i++ ) { nfixed += ( 1 - mask[i] ); } if ( nfixed == MAXPAR ) { error_c( &error_level, tofchar( "NO free parameters!" ) ); } /* =========================================== */ items = 1; input_level = 0; (void) userint_c(&fitdeg,&items,&input_level,KEY_FITORD,MES_FITORD); fitdeg = 2*fitdeg + 1; /* =========================================== */ } /* * Get the parameters necessary for the Least-Squares fit. */ { fint input_level = 2; fint items = 1; (void) userreal_c( &tol, &items, &input_level, KEY_TOLERANCE, MES_TOLERANCE ); } { int i,j; outmat = fmatrix(blo[0],blo[1],bup[0],bup[1]); for(i=blo[0];i<=bup[0];i++){ for(j=blo[1];j<=bup[1];j++){ outmat[j][i] = blank; } } } /* * Loop over all concentric rings and do the fit. */ { int iring; /* =========================================== */ /* Ask user names of text files */ { fint dfault; fint nitems; fint agreed; bool overwrite; char message[256]; do { agreed = YES; dfault = 1; /* Request with default */ strcpy( coeffb, "coefficients.txt" ); sprintf( message, "Filename kinematic harmonic coeff.: [%s]", coeffb ); (void) usertext_c( Coeff, &dfault, KEY_FILE1, tofchar(message) ); Coeff.a[nelc_c(Coeff)] = '\0'; if (agreed) { /* Is this an existing file? */ mp = fopen( coeffb, "r" ); if (mp != NULL) { overwrite = toflog( NO ); nitems = 1; dfault = 1; sprintf( message, "Ok to overwrite [%s]? Y/[N]", coeffb ); (void) userlog_c( &overwrite, &nitems, &dfault, tofchar("OVERWRITE="), tofchar(message) ); overwrite = tobool( overwrite ); cancel_c( tofchar("OVERWRITE=") ); if (!overwrite) { /* User does not want to overwrite file */ cancel_c( KEY_FILE1 ); agreed = NO; } fclose( mp ); } } if (agreed) { mp = fopen( coeffb, "w" ); if (mp == NULL) { anyoutf( 1, "Cannot open file [%s]! Reason unknown", coeffb ); reject_c( KEY_FILE1, tofchar("Cannot open file !") ); agreed = NO; } } } while (!agreed); if (yesinset2) { dfault = 1; do { agreed = YES; strcpy( hicofb, "hicoef.txt" ); sprintf( message, "Filename surface density harmonic coeff.: [%s]", hicofb ); (void) usertext_c( Hicof, &dfault, KEY_FILE2, tofchar(message) ); Hicof.a[nelc_c(Hicof)] = '\0'; if (agreed) { /* Is this an existing file? */ hicof = fopen( hicofb, "r" ); if (hicof != NULL) { overwrite = toflog( NO ); nitems = 1; dfault = 1; sprintf( message, "Ok to overwrite [%s]? Y/[N]", hicofb ); (void) userlog_c( &overwrite, &nitems, &dfault, tofchar("OVERWRITE="), tofchar(message) ); overwrite = tobool( overwrite ); cancel_c( tofchar("OVERWRITE=") ); if (!overwrite) { /* User does not want to overwrite file */ cancel_c( KEY_FILE2 ); agreed = NO; } fclose( hicof ); } } if (agreed) { hicof = fopen( hicofb, "w" ); if (hicof == NULL) { anyoutf( 1, "Cannot open [%s]! Reason unknown", hicofb ); reject_c( KEY_FILE2, tofchar("Cannot open file !") ); agreed = NO; } } } while (!agreed); } } /* =========================================== */ for ( nfit = 0, iring = 0; iring < nrad; iring++ ) { fint n; float e[MAXPAR]; float p[MAXPAR]; float ri, ro; float q = 0.0; p[0] = vsysi; p[1] = vroti[iring]; p[2] = vexpi[iring]; p[3] = posai[iring]; p[4] = incli[iring]; p[5] = xposi; p[6] = yposi; ri = rads[iring] - 0.5 * wids[iring]; ro = rads[iring] + 0.5 * wids[iring]; if ( ri < 0.0 ) ri = 0.0; if ( rotfit( ri, ro, p, e, &n, &q ) > 0 ) { if (nfit < iring) { rads[nfit] = rads[iring]; wids[nfit] = wids[iring]; } vsysf[nfit] = p[0]; if ( e[0] < 999.99 ) { vsyse[nfit] = e[0]; } else { vsyse[nfit] = 999.99; } vrotf[nfit] = p[1]; if ( e[1] < 999.99 ) { vrote[nfit] = e[1]; } else { vrote[nfit] = 999.99; } vexpf[nfit] = p[2]; if ( e[2] < 999.99 ) { vexpe[nfit] = e[2]; } else { vexpe[nfit] = 999.99; } posaf[nfit] = p[3]; if ( e[3] < 999.99 ) { posae[nfit] = e[3]; } else { posae[nfit] = 999.99; } inclf[nfit] = p[4]; if ( e[4] < 999.99 ) { incle[nfit] = e[4]; } else { incle[nfit] = 999.99; } xposf[nfit] = p[5]; if ( e[5] < 999.99 ) { xpose[nfit] = e[5]; } else { xpose[nfit] = 999.99; } yposf[nfit] = p[6]; if ( e[6] < 999.99 ) { ypose[nfit] = e[6]; } else { ypose[nfit] = 999.99; } elp[nfit][0] = elp4[0]; elp[nfit][1] = elp4[1]; elp[nfit][2] = elp4[2]; elp[nfit][3] = elp4[3]; npts[nfit] = n; chis[nfit] = q; nfit += 1; } } } /* =========================================== */ fclose(mp); anyoutf( 1, "RESWRI wrote kinematic harmonic coefficients in file [%s]", coeffb ); if (yesinset2) { fclose(hicof); anyoutf( 1, "RESWRI wrote surface density harmonic coefficients in file [%s]", hicofb ); } { fint tid=0; fint i,j,xip,nwrite; if (outwri == 1) { xip = (bup[0]-blo[0]+1)*(bup[1]-blo[1]+1); gdsi_write_c( oset,&ocwlo,&ocwup,&outmat[blo[1]][blo[0]],&xip,&nwrite,&tid); } } freefmatrix(outmat,blo[0],blo[1]); /* =========================================== */ /* * Now we save the results in a table and a file. */ if (nfit) { FILE *f; char filename[FILENAME_MAX+1]; char message[MAXMESLEN]; char tabnamb[9]; char text[MAXMESLEN]; fchar nulc; fchar string; fchar tabnam; fint gerror; fint i; fint input_level = 1; fint nfound; fint nitems = 0; fint error_level = 1; fint output_level = 3; fint one = 1; struct tm *lt; time_t tp; tabnam.a = tabnamb; tabnam.l = 8; nulc.a = NULL; nulc.l = 0; #ifdef TABLE for ( i = 99; i > 0; i-- ) { gerror = 0; sprintf( tabnamb, "reswri%2.2d", i ); gdsa_tabinq_c( set, &subset, tabnam, nulc, &nitems, &nfound, &gerror ); if ( gerror == -71 ) { break; } } i += 1; if (i == 100) { /* use scratch */ i = 0; } #endif sprintf( tabnamb, "reswri%2.2d", i ); sprintf( filename, "reswri.%2.2d", i ); { fchar name; /* points to filename */ int n; /* number of characters entered */ name.a = filename; name.l = sizeof( filename ) - 1; sprintf( message, MES_FILENAME, filename ); n = usertext_c( name, &input_level, KEY_FILENAME, tofchar( message ) ); if ( n ) filename[n] = 0; } sprintf( message, "Results will be stored in TABLE %s and FILE %s", tabnamb, filename ); anyout_c( &output_level, tofchar( message ) ); #ifdef TABLE gerror = 0; gdsa_crecol_c( set, &subset, tabnam, tofchar( "RADII" ), tofchar( "REAL" ), tofchar( "Radii of Rings" ), tofchar( "ARCSEC" ), &gerror ); gdsa_wcreal_c( set, &subset, tabnam, tofchar( "RADII" ), rads, &one, &nfit, &gerror ); gdsa_crecol_c( set, &subset, tabnam, tofchar( "WIDTHS" ), tofchar( "REAL" ), tofchar( "Width of Rings" ), tofchar( "ARCSEC" ), &gerror ); gdsa_wcreal_c( set, &subset, tabnam, tofchar( "WIDTHS" ), wids, &one, &nfit, &gerror ); gdsa_crecol_c( set, &subset, tabnam, tofchar( "VSYS" ), tofchar( "REAL" ), tofchar( "Systemic Velocity" ), tofchar( "KM/S" ), &gerror ); gdsa_wcreal_c( set, &subset, tabnam, tofchar( "VSYS" ), vsysf, &one, &nfit, &gerror ); gdsa_crecol_c( set, &subset, tabnam, tofchar( "EVSYS" ), tofchar( "REAL" ), tofchar( "Error in Systemic Velocity" ), tofchar( "KM/S" ), &gerror ); gdsa_wcreal_c( set, &subset, tabnam, tofchar( "EVSYS" ), vsyse, &one, &nfit, &gerror ); gdsa_crecol_c( set, &subset, tabnam, tofchar( "VROT" ), tofchar( "REAL" ), tofchar( "Rotation Velocity" ), tofchar( "KM/S" ), &gerror ); gdsa_wcreal_c( set, &subset, tabnam, tofchar( "VROT" ), vrotf, &one, &nfit, &gerror ); gdsa_crecol_c( set, &subset, tabnam, tofchar( "EVROT" ), tofchar( "REAL" ), tofchar( "Error in Rotation Velocity" ), tofchar( "KM/S" ), &gerror ); gdsa_wcreal_c( set, &subset, tabnam, tofchar( "EVROT" ), vrote, &one, &nfit, &gerror ); gdsa_crecol_c( set, &subset, tabnam, tofchar( "VEXP" ), tofchar( "REAL" ), tofchar( "Expansion Velocity" ), tofchar( "KM/S" ), &gerror ); gdsa_wcreal_c( set, &subset, tabnam, tofchar( "VEXP" ), vexpf, &one, &nfit, &gerror ); gdsa_crecol_c( set, &subset, tabnam, tofchar( "EVEXP" ), tofchar( "REAL" ), tofchar( "Error in Expansion Velocity" ), tofchar( "KM/S" ), &gerror ); gdsa_wcreal_c( set, &subset, tabnam, tofchar( "EVEXP" ), vexpe, &one, &nfit, &gerror ); gdsa_crecol_c( set, &subset, tabnam, tofchar( "PA" ), tofchar( "REAL" ), tofchar( "Position Angle" ), tofchar( "DEGREES" ), &gerror ); gdsa_wcreal_c( set, &subset, tabnam, tofchar( "PA" ), posaf, &one, &nfit, &gerror ); gdsa_crecol_c( set, &subset, tabnam, tofchar( "EPA" ), tofchar( "REAL" ), tofchar( "Error in Position Angle" ), tofchar( "DEGREES" ), &gerror ); gdsa_wcreal_c( set, &subset, tabnam, tofchar( "EPA" ), posae, &one, &nfit, &gerror ); gdsa_crecol_c( set, &subset, tabnam, tofchar( "INCL" ), tofchar( "REAL" ), tofchar( "Inclination Angle" ), tofchar( "DEGREES" ), &gerror ); gdsa_wcreal_c( set, &subset, tabnam, tofchar( "INCL" ), inclf, &one, &nfit, &gerror ); gdsa_crecol_c( set, &subset, tabnam, tofchar( "EINCL" ), tofchar( "REAL" ), tofchar( "Error in Inclination Angle" ), tofchar( "DEGREES" ), &gerror ); gdsa_wcreal_c( set, &subset, tabnam, tofchar( "EINCL" ), incle, &one, &nfit, &gerror ); gdsa_crecol_c( set, &subset, tabnam, tofchar( "XPOS" ), tofchar( "REAL" ), tofchar( "X-position centre" ), tofchar( "GRIDS" ), &gerror ); gdsa_wcreal_c( set, &subset, tabnam, tofchar( "XPOS" ), xposf, &one, &nfit, &gerror ); gdsa_crecol_c( set, &subset, tabnam, tofchar( "EXPOS" ), tofchar( "REAL" ), tofchar( "Error in X-position" ), tofchar( "GRIDS" ), &gerror ); gdsa_wcreal_c( set, &subset, tabnam, tofchar( "EXPOS" ), xpose, &one, &nfit, &gerror ); gdsa_crecol_c( set, &subset, tabnam, tofchar( "YPOS" ), tofchar( "REAL" ), tofchar( "Y-position centre" ), tofchar( "GRIDS" ), &gerror ); gdsa_wcreal_c( set, &subset, tabnam, tofchar( "YPOS" ), yposf, &one, &nfit, &gerror ); gdsa_crecol_c( set, &subset, tabnam, tofchar( "EYPOS" ), tofchar( "REAL" ), tofchar( "Error in Y-position" ), tofchar( "GRIDS" ), &gerror ); gdsa_wcreal_c( set, &subset, tabnam, tofchar( "EYPOS" ), ypose, &one, &nfit, &gerror ); gdsa_crecol_c( set, &subset, tabnam, tofchar( "NPTS" ), tofchar( "INT" ), tofchar( "Points in Ring" ), tofchar( " " ), &gerror ); gdsa_wcint_c( set, &subset, tabnam, tofchar( "NPTS" ), npts, &one, &nfit, &gerror ); gdsa_crecol_c( set, &subset, tabnam, tofchar( "SIGMA" ), tofchar( "REAL" ), tofchar( "Sigma Velocity" ), tofchar( "KM/S" ), &gerror ); gdsa_wcreal_c( set, &subset, tabnam, tofchar( "SIGMA" ), chis, &one, &nfit, &gerror ); #endif f = fopen( filename, "w" ); if ( f == NULL ) { error_c( &error_level, tofchar( "Error opening file!" ) ); } fmake( string, text ); sprintf( message, "reswri version %s (%s)", VERSION, __DATE__ ); #ifdef TABLE gdsa_wrcom_c( set, &subset, tabnam, tofchar( message ), &gerror ); #endif if ( f != NULL ) fprintf( f, "# %s\n", message ); tp = time( NULL ); lt = localtime( &tp ); strftime( message, MAXMESLEN, "Date : %b %d,%Y", lt ); #ifdef TABLE gdsa_wrcom_c( set, &subset, tabnam, tofchar( message ), &gerror ); #endif if (f != NULL) fprintf( f, "# %s\n", message ); (void) usertext_c( string, &input_level, KEY_INSET, MES_INSET ); sprintf( message, "Set : %.*s", nelc_c( string ), text ); if ( f != NULL ) fprintf( f, "# %s\n", message ); sprintf( message, "free angle : %5.1f(degrees)", thetaf ); #ifdef TABLE gdsa_wrcom_c( set, &subset, tabnam, tofchar( message ), &gerror ); #endif if ( f != NULL ) fprintf( f, "# %s\n", message ); sprintf( message, "velocity field : " ); switch( side ) { case 1: { strcat( message, "RECEDING HALF" ); break; } case 2: { strcat( message, "APPROACHING HALF" ); break; } case 3: { strcat( message, "BOTH HALVES" ); break; } default: { strcat( message, "?" ); break; } } #ifdef TABLE gdsa_wrcom_c( set, &subset, tabnam, tofchar( message ), &gerror ); #endif if ( f != NULL ) fprintf( f, "# %s\n", message ); sprintf( message, "weighting function : " ); switch( wpow ) { case 0: { strcat( message, "UNIFORM" ); break; } case 1: { strcat( message, "COSINE" ); break; } case 2: { strcat( message, "COS-SQUARED" ); break; } default: { strcat( message, "?" ); break; } } #ifdef TABEL gdsa_wrcom_c( set, &subset, tabnam, tofchar( message ), &gerror ); #endif if ( f != NULL ) fprintf( f, "# %s\n", message ); sprintf( message, "parameters :" ); for ( i = 0; i < MAXPAR; i++ ) { if ( mask[i] ) { switch( i ) { case 0: { strcat( message, " VSYS" ); break; } case 1: { strcat( message, " VROT" ); break; } case 2: { strcat( message, " VEXP" ); break; } case 3: { strcat( message, " PA" ); break; } case 4: { strcat( message, " INCL" ); break; } case 5: { strcat( message, " XPOS" ); break; } case 6: { strcat( message, " YPOS" ); break; } default: { break; } } } } #ifdef TABLE gdsa_wrcom_c( set, &subset, tabnam, tofchar( message ), &gerror ); #endif if ( f != NULL ) fprintf( f, "# %s\n# \n", message ); if ( f != NULL ) { fprintf( f, "# radius width systemic error rotation error" ); fprintf( f, " expansion error pos. error" ); fprintf( f, " incli- error x-pos. error y-pos." ); fprintf( f, " error npts sigma\n" ); fprintf( f, "# velocity velocity " ); fprintf( f, " velocity angle " ); fprintf( f, " nation centre centre" ); fprintf( f, " velocity\n" ); fprintf( f, "# (arcsec) (arcsec) (km/s) (km/s) (km/s) (km/s)" ); fprintf( f, " (km/s) (km/s) (deg.) (deg.)" ); fprintf( f, " (deg.) (deg.) (grid) (grid) (grid)" ); fprintf( f, " (grid) (km/s)\n" ); for ( i = 0; i < nfit; i++ ) { fprintf( f, "%10.2f%9.2f%9.2f%7.2f%9.2f%7.2f%10.2f", (double) rads[i], (double) wids[i], (double) vsysf[i], (double) vsyse[i], (double) vrotf[i], (double) vrote[i], (double) vexpf[i] ); fprintf( f, "%7.2f%8.2f%7.2f%7.2f%7.2f%7.2f", (double) vexpe[i], (double) posaf[i], (double) posae[i], (double) inclf[i], (double) incle[i], (double) xposf[i] ); fprintf( f, "%7.2f%7.2f%7.2f%5d%#9.3g\n", (double) xpose[i], (double) yposf[i], (double) ypose[i], (int) npts[i], (double) chis[i] ); } fclose( f ); } } finis_c( ); return( 0 ); }