////////////////////////////////////////////////////////////////////
//* Specify parameters that define the bucket housing a PMT
{
type: "BUCKET",
version: 1,
index: "bRAT",
run_range: [0, 0],
pass: 0,
comment: "",
timestamp: "",

bulk_material: "acrylic_black",

top_hole_radius: 140.0, //Radius of the top hole
bottom_hole_radius: 42.1, //Radius of the bottom hole

top_hole_depth: 20.0,
bottom_hole_depth: 20.0,

z_edge:   [ 131.8, 111.9, 111.8, -23.2, -23.3, -27.6, -105.1, -105.2, -125.1 ],
inner_rho_edge: [ 0.0, 0.0, 143.5, 143.5, 99.1, 99.1, 42.1, 0.0,  0.0 ],
outer_rho_edge: [ 147.6, 147.6, 147.6, 147.6, 147.6, 147.6, 46.1, 46.1, 46.1 ],

// Offset relative to equator of PMT
offset: 0.0, // mm

}

{
type: "BUCKET",
version: 1,
index: "bSNOMAN",
run_range: [0, 0],
pass: 0,
comment: "",
timestamp: "",

bulk_material: "acrylic_black",

top_hole_radius: 140.0, //Radius of the top hole
bottom_hole_radius: 42.1, //Radius of the bottom hole

top_hole_depth: 20.0,
bottom_hole_depth: 20.0,

z_edge:   [ 122.0, 111.9, 111.8, -23.2, -23.3, -27.6, -105.1, -105.2, -125.1 ],
inner_rho_edge: [ 0.0, 0.0, 143.5, 143.5, 99.1, 99.1, 42.1, 0.0,  0.0 ],
outer_rho_edge: [ 147.6, 147.6, 147.6, 147.6, 147.6, 147.6, 46.1, 46.1, 46.1 ],

// Offset relative to equator of PMT
offset: 0.0, // mm

}

//b2 Is fancy non conc version
{
type: "BUCKET",
version: 1,
index: "bNoConc",
run_range: [0, 0],
pass: 0,
comment: "",
timestamp: "",

bulk_material: "acrylic_black",

top_hole_radius: 140.0, //Radius of the top hole
bottom_hole_radius: 42.1, //Radius of the bottom hole

top_hole_depth: 20.0,
bottom_hole_depth: 20.0,

z_edge:   [ 123.06, 111.9, 111.8, 24.9, 24.8, 22.8, 22.7, -23.2, -23.3, -27.6, -105.1, -105.2, -125.1 ],
inner_rho_edge: [ 0.0, 0.0, 143.5, 143.5, 96.8, 96.8, 143.5, 143.5, 99.1, 99.1, 42.1, 0.0,  0.0 ],
outer_rho_edge: [ 147.6, 147.6, 147.6, 147.6, 147.6, 147.6, 147.6, 147.6, 147.6, 147.6, 46.1, 46.1, 46.1 ],

// Offset relative to equator of PMT
offset: 0.0, // mm

}