{+ file: bdomain.inp +}
{+ directory: xtal_refine +}
{+ description: Grouped, unrestrained B-factor refinement of large domains +}
{+ authors: Axel T. Brunger, and Paul D. Adams +}
{+ copyright: Yale University +}

{+ reference: A.T. Brunger, The Free R Value: a Novel Statistical
              Quantity for Assessing the Accuracy of Crystal Structures,
              Nature 355, 472-474 (1992) +}
{+ reference: N.S. Pannu and R.J. Read, Improved structure refinement
              through maximum likelihood, Acta Cryst. A52, 659-668 (1996) +}

{- Guidelines for using this file:
   - all strings must be quoted by double-quotes
   - logical variables (true/false) are not quoted
   - do not remove any evaluate statements from the file -}

{- begin block parameter definition -} define(

{======================= molecular structure =========================}

{* molecular topology file *}
{===>} structure_infile="amy.mtf";

{* parameter files *}
{===>} parameter_infile_1="CNS_TOPPAR:protein_rep.param";
{===>} parameter_infile_2="";
{===>} parameter_infile_3="";
{===>} parameter_infile_4="";
{===>} parameter_infile_5="";

{* coordinate file *}
{===>} coordinate_infile="amy.pdb";

{====================== crystallographic data ========================}

{* space group *}
{* use International Table conventions with subscripts substituted
   by parenthesis *}
{===>} sg="P2(1)2(1)2(1)";

{* unit cell parameters in Angstroms and degrees *}
{+ table: rows=1 "cell" cols=6 "a" "b" "c" "alpha" "beta" "gamma" +}
{===>} a=61.76;
{===>} b=40.73;
{===>} c=26.74;
{===>} alpha=90;
{===>} beta=90;
{===>} gamma=90;

{* anomalous f' f'' library file *}
{* If a file is not specified, no anomalous contribution will be included *}
{+ choice: "CNS_XRAYLIB:anom_cu.lib" "CNS_XRAYLIB:anom_mo.lib" "" user_file +}
{===>} anom_library="";

{* reflection files *}
{* specify non-anomalous reflection files before anomalous reflection files. *}
{* files must contain unique array names otherwise errors will occur *}
{===>} reflection_infile_1="amy.cv";
{===>} reflection_infile_2="";
{===>} reflection_infile_3="";

{* reciprocal space array containing observed amplitudes: required *}
{===>} obs_f="fobs";

{* reciprocal space array containing sigma values for amplitudes: required *}
{===>} obs_sigf="sigma";

{* reciprocal space array containing test set for cross-validation: required *}
{* cross-validation should always be used, with the possible exception
   of a final round of refinement including all data *}
{* cross-validation is always required for the maximum likelihood targets *}
{===>} test_set="test";

{* number for selection of test reflections: required for cross-validation *}
{* ie. reflections with the test set array equal to this number will be
       used for cross-validation, all other reflections form the working set *}
{===>} test_flag=1;

{* reciprocal space array containing weighting scheme for observed
   amplitudes: optional *}
{* only used for the "residual" and "vector" targets - this will
   default to a constant value of 1 if array is not present *}
{===>} obs_w="";

{* reciprocal space array containing observed intensities: optional *}
{* required for the "mli" target *}
{===>} obs_i="";

{* reciprocal space array containing sigma values for intensities: optional *}
{* required for the "mli" target *}
{===>} obs_sigi="";

{* reciprocal space arrays with experimental phase probability
   distribution: optional *}
{* Hendrickson-Lattman coefficients A,B,C,D *}
{* required for the "mlhl" target *}
{+ table: rows=1 "HL coefficients" cols=4 "A" "B" "C" "D" +}
{===>} obs_pa="";
{===>} obs_pb="";
{===>} obs_pc="";
{===>} obs_pd="";

{* complex reciprocal space array containing experimental phases: optional *}
{* required for the "mixed" and "vector" targets *}
{===>} obs_phase="";

{* reciprocal space array containing experimental figures of merit: optional *}
{* required for the "mixed" target *}
{===>} obs_fom="";

{* resolution limits to be used in refinement *}
{* the full resolution range of observed data should be used in refinement.
   A bulk solvent correction should be applied to allow the use of low
   resolution terms. If no bulk solvent correction is applied, data must
   be truncated at a lower resolution limit of between 8 and 6 Angstrom. *}
{+ table: rows=1 "resolution" cols=2 "lowest" "highest" +}
{===>} low_res=500.0;
{===>} high_res=2.0;

{* apply rejection criteria to amplitudes or intensities *}
{+ choice: "amplitude" "intensity" +}
{===>} obs_type="amplitude";

{* Observed data cutoff criteria: applied to amplitudes or intensities *}
{* reflections with magnitude(Obs)/sigma < cutoff are rejected. *}
{===>} sigma_cut=0.0;

{* rms outlier cutoff: applied to amplitudes or intensities *}
{* reflections with magnitude(Obs) > cutoff*rms(Obs) will be rejected *}
{===>} obs_rms=10000;

{=================== non-crystallographic symmetry ===================}

{* NCS-restraints/constraints file *}
{* see auxiliary/ncs.def *}
{===>} ncs_infile="";

{============ overall B-factor and bulk solvent corrections ==========}

{* overall B-factor correction *}
{+ choice: "no" "isotropic" "anisotropic" +}
{===>} bscale="anisotropic";

{* bulk solvent correction *}
{* a mask is required around the molecule(s). The region
   outside this mask is the solvent region *}
{+ choice: true false +}
{===>} bulk_sol=true;

{* bulk solvent mask file *}
{* mask will be read from O type mask file if a name is given
   otherwise calculated from coordinates of selected atoms *}
{===>} bulk_mask_infile="";

{* automatic bulk solvent parameter search *}
{+ choice: true false +}
{===>} sol_auto=true;

{* optional file with a listing of the results of the automatic bulk solvent grid 
   search *}
{===>} sol_output="";

{* fixed solvent mask parameters if the automatic option is not used *}
{+ table: rows=1 "bulk solvent" cols=2 "probe radius (A)" "shrink radius (A)" +}
{===>} sol_rad=1.0;
{===>} sol_shrink=1.0;

{* fixed solvent parameters if the automatic option is not used *}
{+ table: rows=1 "bulk solvent" cols=2 "e-density level (e/A^3)" "B-factor (A^2)" +}
{===>} sol_k=-1;
{===>} sol_b=-1;

{========================== atom selection ===========================}

{* select atoms to be included in refinement *}
{===>} atom_select=(known and not hydrogen);

{* atom selections which will be refined as groups *}
{* any unselected atoms will remain unchanged
   note: the selections must be non-overlapping *}

{* select atoms in group 1, use the selection all if everything is to be
   a group *}
{===>} bd_group_1=(all);

{* select atoms in group 2, use the selection none if not required *}
{===>} bd_group_2=(none);

{* select atoms in group 3, use the selection none if not required *}
{===>} bd_group_3=(none);

{* select atoms in group 4, use the selection none if not required *}
{===>} bd_group_4=(none);

{* select atoms in group 5, use the selection none if not required *}
{===>} bd_group_5=(none);

{* select atoms in group 6, use the selection none if not required *}
{===>} bd_group_6=(none);

{* select atoms in group 7, use the selection none if not required *}
{===>} bd_group_7=(none);

{* select atoms in group 8, use the selection none if not required *}
{===>} bd_group_8=(none);

{* select atoms in group 9, use the selection none if not required *}
{===>} bd_group_9=(none);

{* select atoms in group 10, use the selection none if not required *}
{===>} bd_group_10=(none);

{================= B-factor minimization parameters ==================}

{* reset all atomic B factors to this number if positive *}
{===>} reset_b=-1;

{* number of steps of group B-factor minimization *}
{===>} bfactor_nstep=30;

{* B-factor limits *}
{+ table: rows=1 "B-factor" cols=2 "minimum" "maximum" +}
{===>} bmin=1;
{===>} bmax=200;

{* refinement target *}
{+ list: mlf: maximum likelihood target using amplitudes
         mli: maximum likelihood target using intensities
        mlhl: maximum likelihood target using amplitudes
              and phase probability distribution
    residual: standard crystallographic residual
      vector: vector residual
       mixed: (1-fom)*residual + fom*vector
        e2e2: correlation coefficient using normalized E^2
        e1e1: correlation coefficient using normalized E
        f2f2: correlation coefficient using F^2
        f1f1: correlation coefficient using F +}
{+ choice: "mlf" "mli" "mlhl" "residual" "vector" "mixed"
           "e2e2" "e1e1" "f2f2" "f1f1" +}
{===>} reftarget="residual";

{* number of bins for refinement target *}
{* this will be determined automatically if a negative value is given
   otherwise the specified number of bins will be used *}
{===>} target_bins=-1;

{* memory allocation for FFT calculation *}
{* this will be determined automatically if a negative value is given
   otherwise the specified number of words will be allocated *}
{===>} fft_memory=-1;

{=========================== output files ============================}

{* output coordinate file *}
{===>} coordinate_outfile="bdomain.pdb";

{* format output coordinates for use in o *}
{* if false then the default CNS output coordinate format will be used *}
{+ choice: true false +}
{===>} pdb_o_format=true;

{===========================================================================}
{         things below this line do not normally need to be changed         }
{===========================================================================}

 ) {- end block parameter definition -}

 checkversion 1.2

 evaluate ($log_level=quiet)
 
 structure @&structure_infile end

 coordinates @&coordinate_infile

 parameter
   if ( &BLANK%parameter_infile_1 = false ) then
      @@&parameter_infile_1
   end if
   if ( &BLANK%parameter_infile_2 = false ) then
      @@&parameter_infile_2
   end if
   if ( &BLANK%parameter_infile_3 = false ) then
      @@&parameter_infile_3
   end if
   if ( &BLANK%parameter_infile_4 = false ) then
      @@&parameter_infile_4
   end if
   if ( &BLANK%parameter_infile_5 = false ) then
      @@&parameter_infile_5
   end if
 end

 xray

   @CNS_XTALLIB:spacegroup.lib (sg=&sg;
                                sgparam=$sgparam;)

   a=&a b=&b c=&c  alpha=&alpha beta=&beta gamma=&gamma

   @CNS_XRAYLIB:scatter.lib

   if ( &BLANK%reflection_infile_1 = false ) then
     reflection @@&reflection_infile_1 end
   end if
   if ( &BLANK%reflection_infile_2 = false ) then
     reflection @@&reflection_infile_2 end
   end if
   if ( &BLANK%reflection_infile_3 = false ) then
     reflection @@&reflection_infile_3 end
   end if

 end

 if ( &BLANK%anom_library = false ) then
   @@&anom_library
 else
   set echo=off end
   xray anomalous=? end
   if ( $result = true ) then
     display Warning: no anomalous library has been specified
     display          no anomalous contribution will used in refinement
   end if
   set echo=on end
 end if

 {- copy define parameters of optional arrays into symbols so 
    we can redefine them -}
    
 evaluate ($obs_i=&obs_i)
 evaluate ($obs_sigi=&obs_sigi)
 evaluate ($obs_w=&obs_w)
 xray
   @@CNS_XTALMODULE:checkrefinput (
                                  reftarget=&reftarget;
                                  obs_f=&obs_f;
                                  obs_sigf=&obs_sigf;
                                  test_set=&test_set;
                                  obs_pa=&obs_pa;
                                  obs_pb=&obs_pb;
                                  obs_pc=&obs_pc;
                                  obs_pd=&obs_pd;
                                  obs_phase=&obs_phase;
                                  obs_fom=&obs_fom;
                                  obs_w=$obs_w;
                                  obs_i=$obs_i;
                                  obs_sigi=$obs_sigi;
                                  )

   query name=fcalc domain=reciprocal end
   if ( $object_exist = false ) then
      declare name=fcalc domain=reciprocal type=complex end
   end if
   declare name=fbulk domain=reciprocal type=complex end
   do (fbulk=0) ( all )

   binresolution &low_res &high_res
   mapresolution &high_res

   if ( &obs_type = "intensity" ) then
     if ( &BLANK%obs_i = true ) then
       display  Error: observed intensity array is undefined
       display         aborting script
       abort
     end if
     evaluate ($reject_obs=&obs_i)
     evaluate ($reject_sig=&obs_sigi)
     show min (amplitude(&STRIP%obs_i)) (all)
     evaluate ($obs_lower_limit=$result-0.1)
   else
     evaluate ($reject_obs=&obs_f)
     evaluate ($reject_sig=&obs_sigf)
     evaluate ($obs_lower_limit=0)
   end if

   declare name=ref_active domain=reciprocal type=integer end
   declare name=tst_active domain=reciprocal type=integer end

   do (ref_active=0) ( all )
   do (ref_active=1) ( ( amplitude($STRIP%reject_obs) > $obs_lower_limit ) and
                       ( &low_res >= d >= &high_res ) )

   statistics overall
     completeness
     selection=( ref_active=1 )
   end
   evaluate ($total_compl=$expression1)

   show sum(1) ( ref_active=1 )
   evaluate ($total_read=$select)
   evaluate ($total_theor=int(1./$total_compl * $total_read))

   show rms (amplitude($STRIP%reject_obs)) ( ref_active=1 )
   evaluate ($obs_high=$result*&obs_rms)
   show min (amplitude($STRIP%reject_obs)) ( ref_active=1 )
   evaluate ($obs_low=$result)

   do (ref_active=0) ( all )
   do (ref_active=1)
                  ( ( amplitude($STRIP%reject_obs) >= &sigma_cut*$STRIP%reject_sig ) and
                    ( $STRIP%reject_sig # 0 ) and
                    ( $obs_low <= amplitude($STRIP%reject_obs) <= $obs_high ) and
                    ( &low_res >= d >= &high_res ) )

   do (tst_active=0) (all)
   if ( &BLANK%test_set = false ) then
     do (tst_active=1) (ref_active=1 and &STRIP%test_set=&test_flag)
   end if

   show sum(1) ( ref_active=1 and tst_active=0 )
   evaluate ($total_work=$select)
   show sum(1) ( ref_active=1 and tst_active=1 )
   evaluate ($total_test=$select)
   evaluate ($total_used=$total_work+$total_test)

   evaluate ($unobserved=$total_theor-$total_read)
   evaluate ($rejected=$total_read-$total_used)
   evaluate ($per_unobs=100*($unobserved/$total_theor))
   evaluate ($per_reject=100*($rejected/$total_theor))
   evaluate ($per_used=100*($total_used/$total_theor))
   evaluate ($per_work=100*($total_work/$total_theor))
   evaluate ($per_test=100*($total_test/$total_theor))

   associate fcalc ( &atom_select )

   tselection=( ref_active=1 )

   cvselection=( tst_active=1 )

   method=FFT          
   
 {- MODIFIED 2/15/06 -}
 end
 

 show min ( b ) ( &atom_select )
 evaluate ($b_min=$result)
 @@CNS_XTALMODULE:fft_parameter_check ( 
                             d_min=&high_res; 
                             b_min=$b_min;
                             grid=auto;
                             fft_memory=&fft_memory;
                             fft_grid=$fft_grid;   
                             fft_b_add=$fft_b_add; 
                             fft_elim=$fft_elim; 
                                      )
                            
 xray
 {- END MODIFICATION -}
 
   tolerance=0.0 lookup=false

 end                  

 igroup interaction (&atom_select) (&atom_select) end

 flags exclude * include xref end

 if ( &BLANK%ncs_infile = false ) then
    inline @&ncs_infile
 end if

 if ( &reset_b > 0 ) then
    do (b=&reset_b) (&atom_select)
 end if

 xray
    predict
      mode=reciprocal
      to=fcalc
      selection=(ref_active=1)
      atomselection=( &atom_select ) 
    end
 end

 {- BEGIN MODIFICATION -}
 @CNS_XTALMODULE:scale_and_solvent_grid_search (
                             bscale=&bscale;
                             sel=( ref_active=1 );
                             sel_test=( tst_active=1 );
                             atom_select=( &atom_select );
                             bulk_sol=&bulk_sol;
                             bulk_mask=&bulk_mask_infile;
                             bulk_atoms=( &atom_select );
                             
                             sol_auto=&sol_auto;
                             sol_k=&sol_k;
                             sol_b=&sol_b;
                             sol_rad=&sol_rad;
                             sol_shrink=&sol_shrink;
 
                             fcalc=fcalc;
                             obs_f=&STRIP%obs_f;
                             obs_sigf=&STRIP%obs_sigf;
                             obs_i=$STRIP%obs_i;
                             obs_sigi=$STRIP%obs_sigi;                             
                             fpart=fbulk;
                             
!
! Begin modification (6/28/06)                             
                             Baniso_11=$Baniso_11;
                             Baniso_22=$Baniso_22;
                             Baniso_33=$Baniso_33;
                             Baniso_12=$Baniso_12;
                             Baniso_13=$Baniso_13;
                             Baniso_23=$Baniso_23;
                             Biso=$Biso_model;
! End modification
! 
                             
                             sol_k_best=$sol_k_ref;
                             sol_b_best=$sol_b_ref;
			     solrad_best=$solrad_best;
			     shrink_best=$shrink_best;
                             
                             b=b;

                             low_b_flag=$low_b_flag;
                            
                             sol_output=&sol_output;
                             
                             )
 xray
   @@CNS_XTALMODULE:calculate_r (
                                 fobs=&STRIP%obs_f;
                                 fcalc=fcalc;
                                 fpart=fbulk;
                                 sel=( ref_active=1 );
                                 sel_test=( tst_active=1 );
                                 print=true;
                                 output=OUTPUT;
                                 r=$start_r;
                                 test_r=$start_test_r;)
 end

 {- check the gridding again since the minimum B-factor may have changed -}
 show min ( b ) ( &atom_select )
 evaluate ($b_min=$result)
 @@CNS_XTALMODULE:fft_parameter_check ( 
                             d_min=&high_res; 
                             b_min=$b_min;
                             grid=auto;
                             fft_memory=&fft_memory;
                             fft_grid=$fft_grid;   
                             fft_b_add=$fft_b_add; 
                             fft_elim=$fft_elim; 
                                      )
{- END MODIFICATION -}

 xray
   @@CNS_XTALMODULE:refinementtarget (target=&reftarget;
                                     sig_sigacv=0.07;
                                     mbins=&target_bins;
                                     fobs=&STRIP%obs_f;
                                     sigma=&STRIP%obs_sigf;
                                     weight=$STRIP%obs_w;
                                     iobs=$STRIP%obs_i;
                                     sigi=$STRIP%obs_sigi;
                                     test=tst_active;
                                     fcalc=fcalc;
                                     fpart=fbulk;
                                     pa=&STRIP%obs_pa;
                                     pb=&STRIP%obs_pb;
                                     pc=&STRIP%obs_pc;
                                     pd=&STRIP%obs_pd;
                                     phase=&STRIP%obs_phase;
                                     fom=&STRIP%obs_fom;
                                     sel=(ref_active=1);
                                     sel_test=(tst_active=1);
                                     statistics=true;)
 end

 @@CNS_XTALMODULE:one_term_wa (wa=$wa;)

 xray
    @@CNS_XTALMODULE:calculate_r (fobs=&STRIP%obs_f;
                                 fcalc=fcalc;
                                 fpart=fbulk;
                                 sel=(ref_active=1);
                                 sel_test=(tst_active=1);
                                 print=true;
                                 output=OUTPUT;
                                 r=$start_r;
                                 test_r=$start_test_r;)
 end

 evaluate ($ngroup=1)
 evaluate ($group=1)
 evaluate ($done=false)
 while ( $done = false ) loop group
   if ( &exist_bd_group_$group = true ) then
     show sum(1) ( &bd_group_$group )
     evaluate ($size_$group=$result)
     evaluate ($ngroup=$ngroup+1)
   else
     evaluate ($done=true)
     evaluate ($ngroup=$ngroup-1)
   end if
   evaluate ($group=$group+1)
 end loop group

 xray
   optimize group

     bmin=&bmin
     bmax=&bmax

     evaluate ($counter=1)
     while ( $counter <= $ngroup ) loop sele
       if ( $size_$counter > 0 ) then
         b=(&atom_select and (&bd_group_$counter))
       end if
       evaluate ($counter=$counter+1)
     end loop sele

     nstep=&bfactor_nstep
     drop=1.0
     ?
   end
 end

 xray
    predict
      mode=reciprocal
      to=fcalc
      selection=(ref_active=1)
      atomselection=( &atom_select ) 
    end
    @@CNS_XTALMODULE:calculate_r (fobs=&STRIP%obs_f;
                                 fcalc=fcalc;
                                 fpart=fbulk;
                                 sel=(ref_active=1);
                                 sel_test=(tst_active=1);
                                 print=true;
                                 output=OUTPUT;
                                 r=$full_r;
                                 test_r=$full_test_r;)
 end

 set display=&coordinate_outfile end

 display REMARK coordinates from domain B-factor refinement
 display REMARK refinement resolution: &low_res - &high_res A
 if ( $total_test > 0 ) then
   display REMARK starting r= $start_r[f6.4] free_r= $start_test_r[f6.4]
   display REMARK final    r= $full_r[f6.4] free_r= $full_test_r[f6.4]
 else
   display REMARK starting r= $start_r[f6.4]
   display REMARK final    r= $full_r[f6.4]
 end if
 xray wa=? end
 evaluate ($wa_print=$result)
 display REMARK wa= $wa_print
 display REMARK target= &STRIP%reftarget  steps= &bfactor_nstep
 display REMARK sg= &STRIP%sg a= &a b= &b c= &c alpha= &alpha beta= &beta gamma= &gamma
 if ( &BLANK%parameter_infile_1 = false ) then
    display REMARK parameter file 1  : &STRIP%parameter_infile_1
 end if
 if ( &BLANK%parameter_infile_2 = false ) then
    display REMARK parameter file 2  : &STRIP%parameter_infile_2
 end if
 if ( &BLANK%parameter_infile_3 = false ) then
    display REMARK parameter file 3  : &STRIP%parameter_infile_3
 end if
 if ( &BLANK%parameter_infile_4 = false ) then
    display REMARK parameter file 4  : &STRIP%parameter_infile_4
 end if
 if ( &BLANK%parameter_infile_5 = false ) then
    display REMARK parameter file 5  : &STRIP%parameter_infile_5
 end if
 display REMARK molecular structure file: &STRIP%structure_infile
 display REMARK input coordinates: &STRIP%coordinate_infile
 if ( &BLANK%anom_library = false ) then
   display REMARK anomalous f' f'' library: &STRIP%anom_library
 end if
 if ( &BLANK%reflection_infile_1 = false ) then
   display REMARK reflection file= &STRIP%reflection_infile_1
 end if
 if ( &BLANK%reflection_infile_2 = false ) then
   display REMARK reflection file= &STRIP%reflection_infile_2
 end if
 if ( &BLANK%reflection_infile_3 = false ) then
   display REMARK reflection file= &STRIP%reflection_infile_3
 end if
 if ( &BLANK%ncs_infile = false ) then
   display REMARK ncs= &STRIP%ncs_type  ncs file= &STRIP%ncs_infile
 else
   display REMARK ncs= none
 end if
 if ( &bscale # "no" ) then
   if ( $low_b_flag = true ) then
     display REMARK warning: B-correction gave atomic B-values less than zero
     display REMARK          they have been reset to zero
   end if
 end if
 ! 
 ! Begin modification (6/28/06)
 if ( &bscale = "anisotropic" ) then
   display REMARK Anisotropic B-factor tensor Ucart of atomic model without isotropic component :
   display REMARK   B11=$Baniso_11[f8.3] B22=$Baniso_22[f8.3] B33=$Baniso_33[f8.3]
   display REMARK   B12=$Baniso_12[f8.3] B13=$Baniso_13[f8.3] B23=$Baniso_23[f8.3]
   display REMARK Isotropic component added to coordinate array B: $Biso_model[f8.3]
 elseif ( &bscale = "isotropic" ) then
   display REMARK B-factor applied to coordinate array B: $Biso_model[f8.3]
 else
   display REMARK initial B-factor correction: none
 end if
 ! End modification
 !

 {- MODIFIED 5/18/05 -}
 if ( &bulk_sol = true ) then 
   display REMARK bulk solvent: probe radius=$solrad_best, shrink value=$solrad_best
   display REMARK bulk solvent: density level= $sol_k_ref e/A^3, B-factor= $sol_b_ref A^2
 else
   display REMARK bulk solvent: false
 end if
 {- END MODIFICATION -}
 
 if ( &obs_type = "intensity" ) then
   display REMARK reflections with Iobs/sigma_I < &sigma_cut rejected
   display REMARK reflections with Iobs > &obs_rms * rms(Iobs) rejected
 else
   display REMARK reflections with |Fobs|/sigma_F < &sigma_cut rejected
   display REMARK reflections with |Fobs| > &obs_rms * rms(Fobs) rejected
 end if
 xray anomalous=? end
 if ( $result = true ) then
   display REMARK anomalous diffraction data was input
 end if

 {- MODIFIED 2/15/06 -}
 display REMARK fft gridding factor = $fft_grid, B factor offset = $fft_b_add A^2, Elimit = $fft_elim
 {- END MODIFICATION -}

 display REMARK theoretical total number of refl. in resol. range:    $total_theor[I6] ( 100.0 % )
 display REMARK number of unobserved reflections (no entry or |F|=0): $unobserved[I6] ( $per_unobs[f5.1] % )
 display REMARK number of reflections rejected:                       $rejected[I6] ( $per_reject[f5.1] % )
 display REMARK total number of reflections used:                     $total_used[I6] ( $per_used[f5.1] % )
 display REMARK number of reflections in working set:                 $total_work[I6] ( $per_work[f5.1] % )
 display REMARK number of reflections in test set:                    $total_test[I6] ( $per_test[f5.1] % )

 remark

 @CNS_XTALMODULE:write_pdb (pdb_o_format=&pdb_o_format;
                            coordinate_outfile=&coordinate_outfile;
                            sgparam=$sgparam;)
 
 stop