! <compile=optimized>
#include "copyright.h"
#include "../include/dprec.fh"
#include "../include/assert.fh"

!Note: The routines contained here were updated in August 2008 by RCW
!      to add support for multiple SCEE and SCNB numbers. This is done
!      by having an array of SCEE and SCNB scale factors based on dihedral
!      type.

! (TD based on my understanding of caldwell's ideas)

!   At this time, all atom names beginning with EP or LP are
!   considered extra points.

!   For vacuum calculations (i.e. not periodic boundary conditions)
!   set use_pme=0
!   (this turns off all but direct sum of ewald)
!   set eedmeth = 4
!   (this uses straight coulomb and not erfc as in ewald)
!   use a big cutoff to get all pairs

!    dac note: in sander7, setting ntb=igb=0 automatically sets up a large
!      box and turns the above two parameters on.

!   If you want the lone pairs or extra points treated just like regular
!   atoms, set noextra = 1
!   (this disables the pattern to find them, so all are normal atoms)
!   The DEFAULT is noextra = 0

!   If you want bond angle and dihedral forces as usual for lone pairs
!   (i.e. as if they are amber atoms)
!   set frameon=0

!   If frameon is set to 1, (DEFAULT) the bonds, angles and dihedral interactions
!   involving the lone pairs/extra points are removed
!   except for constraints added during parm. The lone pairs are kept
!   in ideal geometry relative to local atoms, and resulting torques are
!   transferred to these atoms.

!   If chngmask=1 (DEFAULT), new 1-1, 1-2, 1-3 and 1-4 interactions are
!   calculated. An extra point belonging to an atom has a 1-1 interaction with it,
!   and participates in any 1-2, 1-3 or 1-4 interaction that atom has.

!   For example, suppose (excusing the geometry)
!   C1,C2,C3,C4 form a dihedral and each has 1 extra point attached as below

!           C1------C2------C3---------C4
!           |        |       |         |
!           |        |       |         |
!          Ep1      Ep2     Ep3       Ep4

!   The 1-4 interactions include  C1&C4, Ep1&C4, C1&Ep4, and Ep1&Ep4

!   To see a printout of all 1-1, 1-2, 1-3 and 1-4 interactions
!   set verbose=1
!   These interactions are masked out of nonbonds. Thus the amber mask list is
!   rebuilt from these 1-1, 1-2, 1-3 and 1-4 pairs. I don't mask pairs that
!   aren't in the union of these.

!   A separate list of 1-4 nonbonds is then compiled. This list does not agree
!   in general with the above 1-4, since a 1-4 could also be a 1-3 if its
!   in a ring. I use the rules in EPHI to see who is included:

!   Here is that code

!             DO 700 JN = 1,MAXLEN
!               I3 = IP(JN+IST)
!               K3T = KP(JN+IST)
!               L3T = LP(JN+IST)
!               IC0 = ICP(JN+IST)
!               IDUMI = ISIGN(1,K3T)
!               IDUML = ISIGN(1,L3T)
!               KDIV = (2+IDUMI+IDUML)/4
!               L3 = IABS(L3T)
!               FMULN = FLOAT(KDIV)
!   C
!               II = (I3+3)/3
!               JJ = (L3+3)/3
!               IA1 = IAC(II)
!               IA2 = IAC(JJ)
!               IBIG = MAX0(IA1,IA2)
!               ISML = MIN0(IA1,IA2)
!               IC = IBIG*(IBIG-1)/2+ISML
!   C
!   C             ----- CALCULATE THE 14-EEL ENERGY -----
!   C
!               R2 = FMULN/CT(JN)
!               R1 = SQRT(R2)
!       ...........

!   so I include a pair in the 1-4 list if kdiv is > 0 
!   this is decided at startup. This decision logic is applied to the parent
!   atoms, and if they are included, so are extra points attached:

!   That is, in the above situation, if C1 and C4 pass the test I include
!   C1&C4, Ep1&C4, C1&Ep4, and Ep1&Ep4. I don't test the dihedrals
!   involving the extra points since the decision is based solely on
!   parent atoms.

!   The list of 1-4 nonbonds is also spit out if verbose=1.

!   To scale 1-4 charge-dipole and dipole-dipole interactions the same as
!   1-4 charge-charge (i.e. divided by scee)
!    set scaldip=1   (DEFAULT)
!   If scaldip=0 the 1-4 charge-dipole and dipole-dipole interactions
!   are treated the same as other dipolar interactions (i.e. divided by 1)

!-----------------------------------------------------------------------------
! Using the bond list (the one not involving hydrogens), find the number
! of neighbors (heavy atom, hydrogens and extra points) attached to each
! atom. For example if atom i is heavy, numnghbr(1,i) is the number of heavy
! atoms attached to atom i, while numnghbr(2,i) is the number of
! hydrogens attached, and numnghbr(3,i) is the number of
! extra points attached to i. The identities of neighbors are
! packed back to back in nghbrlst. the attyp array holds the
! atom types, usded to distinguish extra points or lone pairs from
! regular atoms.
!-----------------------------------------------------------------------------

!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ [Enter a one-line description of subroutine init_extra_pts1 here]
subroutine init_extra_pts1()
   
   !     --- just figure out how much space is needed for extra_pts,
   !         and set up correct pointers.  We need to do this first for
   !         the new dynamic memory allocation scheme
   implicit none
#  include "memory.h"
#  include "extra_pts.h"
   integer max14

#ifndef LES
   call allocate_frames(numextra,ifrtyp,iatcen,inumep, &
         iepfr,ifrst,imid,ithrd,leploc)
   max14 = 12*(nphih+nphia+ndper)
   call allocate_14nb(inb_14,max14)
#endif
   
   return
end subroutine init_extra_pts1 


!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ [Enter a one-line description of subroutine init_extra_pts here]
subroutine init_extra_pts(ibh,jbh,icbh, &
      ib,jb,icb,ith,jth,kth,icth, &
      it,jt,kt,ict,iph,jph,kph,lph,icph, &
      ipa,jpa,kpa,lpa,icpa, &
      isymbl,ix,x,iblo,inb, &
      nspm,nsp,tma,tmass,tmassinv,amass,amassinv,req)
   implicit none
   integer ibh(*),jbh(*),icbh(*),ib(*),jb(*),icb(*), &
         ith(*),jth(*),kth(*),icth(*), &
         it(*),jt(*),kt(*),ict(*), &
         iph(*),jph(*),kph(*),lph(*),icph(*), &
         ipa(*),jpa(*),kpa(*),lpa(*),icpa(*), &
         ix(*),iblo(*),inb(*)
   character(len=4) isymbl(*)
   integer iz
   _REAL_ x(*)
   integer nspm,nsp(*)
   _REAL_ tma(*),tmass,tmassinv,amass(*),amassinv(*),req(*)
   
#  include "extra_pts.h"
#  include "ew_cntrl.h"
#  include "memory.h"

   integer, dimension(:), allocatable :: epbtyp
   integer, dimension(:), allocatable :: nghbrs
   integer, dimension(:), allocatable :: hnghbrs
   integer, dimension(:), allocatable :: enghbrs
   integer, dimension(:), allocatable :: numnghbr
   integer, dimension(:), allocatable :: epowner
   integer, dimension(:), allocatable :: offset
   integer, dimension(:), allocatable :: test
   integer, dimension(:), allocatable :: i11
   integer, dimension(:), allocatable :: i12
   integer, dimension(:), allocatable :: i13
   integer, dimension(:), allocatable :: i14
   integer, dimension(:), allocatable :: nb_14_list
   integer, dimension(:), allocatable :: s3
   integer, dimension(:), allocatable :: s4
   
   character(len=4) ep,blank
   integer n,numextra_test
   integer num11,num12,num13,num14,max11,max12,max13,max14
   integer maxa,ier
   
   ep = 'EP  '
   blank = '    '
   
   numextra_test = 0
   do n = 1,natom
      if ( isymbl(n) == ep )then
         numextra_test = numextra_test + 1
      end if
   end do
   if( numextra_test /= numextra) then
      write(6,*) 'Error in numextra_test'
      call mexit(6,1)
   end if
   if( numextra == 0 ) frameon = 0
#ifdef LES
   if( numextra /= 0 ) then
      write(6,*) 'LES requires numextra=0'
      call mexit(6,1)
   end if
   return
#endif
   
   max11 = natom+numextra
   max12 = 3*(nbonh+nbona+nbper)
   max13 = 3*(ntheth+ntheta+ngper)
   max14 = 12*(nphih+nphia+ndper)
   maxa = max(max11,max12,max13,max14)
   allocate( s3(maxa), stat=ier )
   REQUIRE( ier == 0 )
   allocate( s4(maxa), stat=ier )
   REQUIRE( ier == 0 )
   
   allocate ( epbtyp(5*natom), stat=ier)
   REQUIRE( ier==0 )
   allocate ( nghbrs(5*natom), stat=ier)
   REQUIRE( ier==0 )
   allocate ( hnghbrs(5*natom), stat=ier)
   REQUIRE( ier==0 )
   allocate ( enghbrs(5*natom), stat=ier)
   REQUIRE( ier==0 )
   allocate ( numnghbr(3*natom), stat=ier)
   REQUIRE( ier==0 )
   allocate ( epowner(natom), stat=ier)
   REQUIRE( ier==0 )
   allocate ( offset(natom), stat=ier)
   REQUIRE( ier==0 )
   allocate ( test(natom), stat=ier)
   REQUIRE( ier==0 )
   allocate ( i11(2*max11), stat=ier)
   REQUIRE( ier==0 )
   allocate ( i12(2*max12), stat=ier)
   REQUIRE( ier==0 )
   allocate ( i13(2*max13), stat=ier)
   REQUIRE( ier==0 )
   allocate ( i14(2*max14), stat=ier)
   REQUIRE( ier==0 )
   allocate ( nb_14_list(max14), stat=ier)
   REQUIRE( ier==0 )

   call get_nghbrs(ibh,jbh,ib,jb,icb,nbonh,nbona+nbper, &
         natom,isymbl,ep, &
         nghbrs,hnghbrs,enghbrs, &
         numnghbr,epowner,epbtyp)
   call define_frames(natom,isymbl, &
         nghbrs,hnghbrs,enghbrs, &
         numnghbr, &
         ix(ifrtyp),ix(iatcen),ix(inumep),ix(iepfr), &
         ix(ifrst),ix(imid),ix(ithrd),x(leploc),numfr, &
         epbtyp,req,verbose)
   
   call fill_bonded(max11,max12,max13,max14, &
         num11,num12,num13,num14, &
         i11,i12,i13,i14, &
         enghbrs, &
         numnghbr,epowner,natom, &
         ibh,jbh,ib,jb,ith,kth,it,kt,iph,lph,ipa,lpa, &
         nbonh,nbona,nbper,ntheth,ntheta,ngper,nphih,nphia,ndper, &
         offset,test,s3,verbose)
   
   if ( chngmask == 1 )then
      call redo_masked(natom,iblo,inb,nnb, &
            num11,num12,num13,num14, &
            i11,i12,i13,i14, &
            offset,test)
   end if
   
   call build_14nb(nb_14_list,numnb14,max14, &
         iph,jph,kph,lph,icph,ipa,jpa,kpa,lpa,icpa, &
         nphih,nphia,ndper, &
         epowner,numnghbr,enghbrs, &
         natom,offset,test,s3,s4, &
         chngmask,verbose)
   call copy_14nb(nb_14_list,ix(inb_14),numnb14)
   
   !      ---if frameon = 1 use frames and forces to define ep's
   !      ---else use their masses and amber force params
   
   if ( frameon == 1 )then
      
      !      ---zero out mass and massinv for extra points:
      
      call fix_masses(natom,epowner, &
            nspm,nsp,tma,tmass,tmassinv,amass,amassinv)
      
      !      ---now remove bonds etc involving extra points:
      
      iz = 0
      call trim_bonds(ibh,jbh,icbh,nbonh,iz,epowner)
      call trim_bonds(ib,jb,icb,nbona,nbper,epowner)
      call trim_theta(ith,jth,kth,icth,ntheth,iz,epowner)
      call trim_theta(it,jt,kt,ict,ntheta,ngper,epowner)
      call trim_phi(iph,jph,kph,lph,icph,nphih,iz,epowner)
      call trim_phi(ipa,jpa,kpa,lpa,icpa,nphia,ndper,epowner)
   end if
   
   deallocate( s3 )
   deallocate( s4 )
   deallocate ( epbtyp )
   deallocate ( nghbrs )
   deallocate ( hnghbrs )
   deallocate ( enghbrs )
   deallocate ( numnghbr )
   deallocate ( epowner )
   deallocate ( offset )
   deallocate ( test )
   deallocate ( i11 )
   deallocate ( i12 )
   deallocate ( i13 )
   deallocate ( i14 )
   deallocate ( nb_14_list )

   return
end subroutine init_extra_pts 
!---------------------------------------------------------------

!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+      GET_NGHBRS
!---------------------------------------------------------------
!+   find atoms involved in each center with an EP
!
subroutine get_nghbrs(ibh,jbh,ib,jb,icb,numbh,numb, &
      natom,isymbl,ep, &
      nghbrs,hnghbrs,enghbrs,numnghbr,epowner,epbtyp)
   implicit none
   integer ibh(*),jbh(*),ib(*),jb(*),icb(*),numbh,numb,natom
   character(len=4) isymbl(*),ep
   integer nghbrs(5,natom),hnghbrs(5,natom),enghbrs(5,natom), &
         numnghbr(3,natom),epowner(natom),epbtyp(5,natom)
#  include "extra_pts.h"
   integer n,ii,jj

   epowner = 0
   numnghbr=0
   nghbrs = 0
   hnghbrs = 0
   enghbrs = 0
   epbtyp = 0

   do n = 1,numb
      ii = (ib(n) + 3)/3
      jj = (jb(n) + 3)/3
      if ( isymbl(ii) == ep ) then
         numnghbr(3,jj) = numnghbr(3,jj) + 1
         enghbrs(numnghbr(3,jj),jj) = ii
         epowner(ii) = jj
         epbtyp(numnghbr(3,jj),jj) = icb(n)
      else if ( isymbl(jj) == ep ) then
         numnghbr(3,ii) = numnghbr(3,ii) + 1
         enghbrs(numnghbr(3,ii),ii) = jj
         epowner(jj) = ii
         epbtyp(numnghbr(3,ii),ii) = icb(n)
      else
         numnghbr(1,ii) = numnghbr(1,ii) + 1
         numnghbr(1,jj) = numnghbr(1,jj) + 1
         nghbrs(numnghbr(1,ii),ii) = jj
         nghbrs(numnghbr(1,jj),jj) = ii
      end if
   end do
   do n = 1,numbh
      ii = (ibh(n) + 3)/3
      jj = (jbh(n) + 3)/3
      numnghbr(2,ii) = numnghbr(2,ii) + 1
      numnghbr(2,jj) = numnghbr(2,jj) + 1
      hnghbrs(numnghbr(2,ii),ii) = jj
      hnghbrs(numnghbr(2,jj),jj) = ii
   end do
   return
end subroutine get_nghbrs 
!---------------------------------------------------------------

!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+      DEFINE_FRAMES
!-----------------------------------------------------------------------
!+   fix the positions of EP in the local frame/coord depending
!+   on the kind of frame and atom types.
!
subroutine define_frames(natom,isymbl, &
      nghbrs,hnghbrs,enghbrs,numnghbr, &
      frtype,atcenter,numep,epframe,first,middle,third, &
      eplocal,numfr,epbtyp,req,verbose)
   use constants, only : DEG_TO_RAD
   implicit none
   character(len=4) isymbl(*)
   integer natom
   integer nghbrs(5,*),hnghbrs(5,*),enghbrs(5,*), &
         numnghbr(3,*),epbtyp(5,*)
   integer frtype(*),atcenter(*),numep(*),epframe(2,*), &
         first(*),middle(*),third(*),numfr,verbose
   _REAL_ eplocal(3,2,*),req(*)
   integer k,m,n,l

   _REAL_ tetcos,tetsin,angle,scos,ssin
   character(len=4) sulf,sulfh

   sulf = 'S   '
   sulfh = 'SH  '
   
   !     --- get half-angle for tetrahedral
   
   angle = 54.735d0
   angle = angle*DEG_TO_RAD
   tetcos = cos(angle)
   tetsin = sin(angle)
   
   !     --- get cos,sin for 60
   
   scos = 0.5d0
   ssin = sqrt(1.d0 - scos*scos)
   
   numfr = 0
   do n = 1,natom
      
      if ( numnghbr(3,n) > 0 ) then
         
         if ( numnghbr(1,n) + numnghbr(2,n) > 2 ) then
            write(6,*)'EXTRA_PTS: too many nghbrs!!'
            call mexit(6,1)
         end if
         numfr = numfr + 1
         atcenter(numfr) = n
         numep(numfr) = numnghbr(3,n)
         do k = 1,2
            epframe(k,numfr) = 0
         end do
         do k = 1,numep(numfr)
            epframe(k,numfr) = enghbrs(k,n)
         end do
         
         if ( numnghbr(1,n) == 0  .and. numnghbr(2,n) == 2 &
               .and. numnghbr(3,n) == 1) then
            
            !----- TIP4P water: ---------------------------------
            !   (temporarily assign frtype to 3, 
            !                     will set to 1 in next section)
            
            frtype(numfr) = 3
            first(numfr) = hnghbrs(1,n)
            middle(numfr) = n
            third(numfr) = hnghbrs(2,n)
            
         else if ( numnghbr(1,n) == 0  .and. numnghbr(2,n) == 2 &
               .and. numnghbr(3,n) == 2) then
            
            !---  TIP5P water: -------------------------------
            
            frtype(numfr) = 1
            first(numfr) = hnghbrs(1,n)
            middle(numfr) = n
            third(numfr) = hnghbrs(2,n)
            
         else if ( numnghbr(1,n) > 1 ) then
            
            !--- "ordinary" type of frame ----------------------
            !      defined by two other heavy atoms:
            
            frtype(numfr) = 1
            first(numfr) = nghbrs(1,n)
            middle(numfr) = n
            third(numfr) = nghbrs(2,n)
            
         else if ( numnghbr(1,n) == 1 .and. numnghbr(2,n) == 1) then
            
            !--- frame defined by one heavy atom and one hydrogen: -------
            
            frtype(numfr) = 1
            first(numfr) = nghbrs(1,n)
            middle(numfr) = n
            third(numfr) = hnghbrs(1,n)
            
         else if ( numnghbr(1,n) == 1 .and. numnghbr(2,n) == 0) then
            
            !--- Assume this is CARBONYL oxygen. -----------------------
            !   (Need to use midpoints of other two bonds of the carbon
            !   for first and third in orient force, thus (mis)use
            !   first middle third and atcenter to store 4 atoms for
            !   this special case.)
            
            frtype(numfr) = 2
            m = nghbrs(1,n)
            middle(numfr) = m
            if ( numnghbr(1,m) /= 3 .or.numnghbr(2,m) > 0 )then
               write(6,*)'EXTRA_PTS: frtype 2 Should not be here'
               write(6,*) n,m,numnghbr(1,m),numnghbr(2,m)
               call mexit(6,1)
            end if
            
            ! numnghbr(1,m) = 3. One is n (the oxygen) and other 2 are
            ! other bonding partners of carbon
            first(numfr) = 0
            third(numfr) = 0
            k=1
            do while( (k < 4) .and. (first(numfr) == 0) )
               if ( nghbrs(k,m) /= n )then
                  first(numfr) = nghbrs(k,m)
               end if
               k=k+1
            end do
            k=1
            do while( (k < 4) .and. (third(numfr) == 0) )
               if ( nghbrs(k,m) /= n .and. &
                     nghbrs(k,m) /= first(numfr))then
                  third(numfr) = nghbrs(k,m)
               end if
               k=k+1
            end do
            if((first(numfr)==0) .or. (third(numfr) == 0))then
               write(6,*) 'EXTRA_PTS: cannot find first or third frame point '
               write(6,*) 'define: ',n,numnghbr(1,n), &
                     numnghbr(2,n),numnghbr(3,n),first(numfr),third(numfr)
               call mexit(6,1)
            endif
         else
            write(6,*) 'EXTRA_PTS: unexpected numnghbr array: '
            write(6,*) 'define: ',n,numnghbr(1,n), &
                  numnghbr(2,n),numnghbr(3,n)
            call mexit(6,1)
         end if  !  ( numnghbr(1,n) == 0  .and. numnghbr(2,n) == 2
      end if  !  ( numnghbr(1,n) == 0  .and. numnghbr(2,n) == 2
   end do  ! ( numnghbr(3,n) > 0 )
   
   !--- get the local coords ---------------------------------------
   
   eplocal(1:3,1:2,1:numfr) = 0.d0
   do n = 1,numfr
      l = atcenter(n)
      if ( frtype(n) == 1 .or. frtype(n) == 3 )then
         
         !  z axis along symmetry axis of second atom opposite
         !      bisector of first,third;
         !  x axis along the diff vector third minus first
         !  y axis is cross product
         
         if ( numep(n) == 1 )then
            
            ! extra point is along the z-direction: positive for ordinary
            ! lone pair, negative for TIP4P water extra point:
            
            eplocal(3,1,n) = req(epbtyp(1,l))
            if( frtype(n) == 3 ) then
               eplocal(3,1,n) = -req(epbtyp(1,l))
               frtype(n) = 1
            end if
            
         else if ( numep(n) == 2 )then
            
            ! extra points are are in the z,y plane, tetrahedrally
            ! (unless middle atom is sulfur, in which case they
            ! are opposite along y):
            
            m = middle(n)
            if ( isymbl(m) == sulf .or. isymbl(m) == sulfh )then
               eplocal(2,1,n) = req(epbtyp(1,l))
               eplocal(2,2,n) = -req(epbtyp(2,l))
            else
               eplocal(3,1,n) = tetcos*req(epbtyp(1,l))
               eplocal(2,1,n) = tetsin*req(epbtyp(1,l))
               eplocal(3,2,n) = tetcos*req(epbtyp(2,l))
               eplocal(2,2,n) = -tetsin*req(epbtyp(2,l))
            end if
            
         else
            write(6,*) 'EXTRA_PTS: unexpected numep value: ',numep(n)
            call mexit(6,1)
         end if  ! ( numep(n) == 1 )
         
      else if ( frtype(n) == 2 )then
         
         ! z axis is along bond from middle to atcenter
         ! x axis in plane of atcenter and midpoints of first,middle
         !    and middle,third
         
         if ( numep(n) == 1 )then
            eplocal(3,1,n) = req(epbtyp(1,l))
         else if ( numep(n) == 2 )then
            eplocal(3,1,n) = scos*req(epbtyp(1,l))
            eplocal(1,1,n) = ssin*req(epbtyp(1,l))
            eplocal(3,2,n) = scos*req(epbtyp(2,l))
            eplocal(1,2,n) = -ssin*req(epbtyp(2,l))
         else
            write(6,*) 'EXTRA_PTS: unexpected numep value: ',numep(n)
            call mexit(6,1)
         end if
      else
         write(6,*) 'EXTRA_PTS: unexpected frtype value: ',frtype(n)
         call mexit(6,1)
      end if  ! ( frtype(n) == 1 .or. frtype(n) == 3 )
   end do  !  n = 1,numfr
   
   if ( verbose > 3 )then
      write(6,*) 'frames:'
      do n = 1,numfr
         write(6,666)n,atcenter(n), &
               isymbl(atcenter(n)),numep(n), &
               epframe(1,n),epframe(2,n),frtype(n), &
               first(n),middle(n),third(n)
         write(6,667)eplocal(1,1,n),eplocal(2,1,n),eplocal(3,1,n), &
               eplocal(1,2,n),eplocal(2,2,n),eplocal(3,2,n)
      end do
   end if
   
   666 format(1x,2i7,1x,a4,7i7)
   667 format(1x,6(1x,f10.4))

   return
end subroutine define_frames 

!---------------------------------------------------------------
!     LOCAL TO GLOBAL
!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ Calls do_local_to_global() to
!+ Put EP in position in world coord system based on the
!  position of the frame and the local coordinates.
!
subroutine local_to_global(crd,x,ix)
   implicit none

   _REAL_ crd(3,*),x(*)
   integer ix(*)
#  include "extra_pts.h"
#  include "ew_cntrl.h"
   !     integer iproc,numtasks
   
   if ( frameon == 0 .or. numfr == 0 ) return
   call do_local_global(crd,ix(ifrtyp),ix(iatcen),ix(inumep), &
         ix(iepfr),ix(ifrst),ix(imid),ix(ithrd),x(leploc),numfr)
   return
end subroutine local_to_global 
!---------------------------------------------------------------

!----------------------------------------------------------------------
!     DO_LOCAL_TO_GLOBAL
!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ Put EP in position in world coord system based on the
!  position of the frame and the local coordinates.
!
subroutine do_local_global(crd,frtype,atcenter,numep, &
      epframe,first,middle,third,eplocal,numfr)
   !        iproc,numtasks)
   implicit none
   _REAL_ crd(3,*),eplocal(3,2,*)
   integer frtype(*),atcenter(*),numep(*),epframe(2,*),numfr
   integer first(*),middle(*),third(*)
   !     integer iproc,numtasks
   
   !     Frames from Stone and Alderton Mol Phys. 56, 5, 1047 (1985)
   !       plus weird modification for carbonyl to symmetrize
   
   _REAL_ uvec(3),vvec(3),ave(3),diff(3), &
         usiz,vsiz,asiz,dsiz,f(3,3)
   _REAL_ a(3),b(3),c(3)
   integer j,k,m,n
   
   if ( numfr == 0 )return
   do n = 1,numfr
      if ( frtype(n) == 1 )then
         do m = 1,3
            a(m) = crd(m,first(n))
            b(m) = crd(m,middle(n))
            c(m) = crd(m,third(n))
         end do
      else if ( frtype(n) == 2 ) then
         do m = 1,3
            a(m) = 0.5d0*(crd(m,first(n))+crd(m,middle(n)))
            b(m) = crd(m,atcenter(n))
            c(m) = 0.5d0*(crd(m,third(n))+crd(m,middle(n)))
         end do
      end if
      
      !       z-axis along symmmetry axis of b midway between
      !         unit vector to a and unit vector to c; points opposite
      
      usiz = 0.d0
      vsiz = 0.d0
      do m = 1,3
         uvec(m) = a(m) - b(m)
         usiz = usiz + uvec(m)*uvec(m)
         vvec(m) = c(m) - b(m)
         vsiz = vsiz + vvec(m)*vvec(m)
      end do
      usiz = sqrt(usiz)
      vsiz = sqrt(vsiz)
      asiz = 0.d0
      dsiz = 0.d0
      do m = 1,3
         uvec(m) = uvec(m)/usiz
         vvec(m) = vvec(m)/vsiz
         ave(m) = (uvec(m)+vvec(m))/2.d0
         asiz = asiz + ave(m)*ave(m)
         diff(m) = (vvec(m)-uvec(m))/2.d0
         dsiz = dsiz + diff(m)*diff(m)
      end do
      asiz = sqrt(asiz)
      dsiz = sqrt(dsiz)
      do m = 1,3
         f(m,3) = -ave(m)/asiz
         f(m,1) = diff(m)/dsiz
      end do
      f(1,2) = f(2,3)*f(3,1)-f(3,3)*f(2,1)
      f(2,2) = f(3,3)*f(1,1)-f(1,3)*f(3,1)
      f(3,2) = f(1,3)*f(2,1)-f(2,3)*f(1,1)
      do k = 1, numep(n)
         j = epframe(k,n)
         do m = 1,3
            crd(m,j) = crd(m,atcenter(n)) + eplocal(1,k,n)*f(m,1) + &
                  eplocal(2,k,n)*f(m,2) + eplocal(3,k,n)*f(m,3)
         end do
      end do
   end do  !  n = 1,numfr
   return
end subroutine do_local_global 
!---------------------------------------------------------------------

!----------------------------------------------------------------------
!    ORIENT_FRC
!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ Calls do_orient_frc() to
!+ transfer forces from EP to main atoms in frame
!
subroutine orient_frc(crd,frc,framevir,ix)
   implicit none

   _REAL_ crd(3,*),frc(3,*)
   _REAL_ framevir(3,3)
   integer ix(*)
#  include "extra_pts.h"
#  include "ew_cntrl.h"

   if ( frameon == 0 )return
   call do_orient_frc(crd,frc,framevir, &
         ix(ifrtyp),ix(iatcen),ix(inumep), &
         ix(iepfr),ix(ifrst),ix(imid),ix(ithrd),numfr)
   return
end subroutine orient_frc 
!---------------------------------------------------------------------

!----------------------------------------------------------------------
!   DO_ ORIENT_FRC
!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ transfer forces from EP to main atoms in frame
!
subroutine do_orient_frc(crd,frc,framevir,frtype,atcenter,numep, &
      epframe,first,middle,third,numfr)
   implicit none
   _REAL_ crd(3,*),frc(3,*)
   _REAL_ framevir(3,3)
   integer frtype(*),atcenter(*),numep(*),epframe(2,*),numfr
   integer first(*),middle(*),third(*)
   
   ! Frames from Stone and Alderton Mol Phys. 56, 5, 1047 (1985)
   
   _REAL_ u(3),v(3),w(3)
   _REAL_ up(3),vp(3),diff(3)
   _REAL_ usiz,vsiz,wsiz,upsiz,vpsiz
   _REAL_ dotdu,dotdv,dphidu,dphidv,dphidw
   _REAL_ c,s,uvdis,vudis,du(3),dv(3)
   _REAL_ force(3),torque(3),rel(3)
   integer i,j,k,l,j1,j2,j3,j4,m,n
   _REAL_ ap(3),bp(3),cp(3)
   
   ! motions of the frame can be described in terms of rotations about the
   ! unit vectors u and v from middle to first, third respecively
   ! and rotation about the unit cross product w
   
   if ( numfr == 0 )return
   
   framevir = 0.d0
   do n = 1,numfr
      force  = 0.d0
      torque = 0.d0
      i = atcenter(n)
      do k = 1,numep(n)
         j = epframe(k,n)
         force(1:3) = force(1:3) + frc(1:3,j)
         rel(1:3)   = crd(1:3,j) - crd(1:3,i)
         
#ifndef noVIRIAL
         !         ---get transferred force component of virial
         
         do m = 1,3
            do l = 1,3
               framevir(l,m) = framevir(l,m) + frc(l,j)*rel(m)
            end do
         end do
#endif
         
         !---torque is rel x frc
         
         torque(1) = torque(1) + rel(2)*frc(3,j) - rel(3)*frc(2,j)
         torque(2) = torque(2) + rel(3)*frc(1,j) - rel(1)*frc(3,j)
         torque(3) = torque(3) + rel(1)*frc(2,j) - rel(2)*frc(1,j)
         frc(1,j) = 0.d0
         frc(2,j) = 0.d0
         frc(3,j) = 0.d0
      end do

      if ( frtype(n) == 1 ) then
         do m = 1,3
            ap(m) = crd(m,first(n))
            bp(m) = crd(m,middle(n))
            cp(m) = crd(m,third(n))
         end do
      else if ( frtype(n) == 2 ) then
         do m = 1,3
            ap(m) = 0.5d0*(crd(m,first(n))+crd(m,middle(n)))
            bp(m) = crd(m,atcenter(n))
            cp(m) = 0.5d0*(crd(m,third(n))+crd(m,middle(n)))
         end do
      end if
      usiz = 0.d0
      vsiz = 0.d0
      do m = 1,3
         u(m) = ap(m) - bp(m)
         usiz = usiz + u(m)*u(m)
         v(m) = cp(m) - bp(m)
         vsiz = vsiz + v(m)*v(m)
      end do
      usiz = sqrt(usiz)
      vsiz = sqrt(vsiz)
      w(1) = u(2)*v(3)-u(3)*v(2)
      w(2) = u(3)*v(1)-u(1)*v(3)
      w(3) = u(1)*v(2)-u(2)*v(1)
      wsiz = sqrt(w(1)*w(1)+w(2)*w(2)+w(3)*w(3))
      dotdu = 0.d0
      dotdv = 0.d0
      do m = 1,3
         u(m) = u(m)/usiz
         v(m) = v(m)/vsiz
         w(m) = w(m)/wsiz
         diff(m) = v(m) - u(m)
         dotdu = dotdu + u(m)*diff(m)
         dotdv = dotdv + v(m)*diff(m)
      end do
      
      !       ---get perps to u,v to get direction of motion of u or v
      !          due to rotation about the cross product vector w
      
      upsiz = 0.d0
      vpsiz = 0.d0
      do m = 1,3
         up(m) = diff(m) - dotdu*u(m)
         vp(m) = diff(m) - dotdv*v(m)
         upsiz = upsiz + up(m)*up(m)
         vpsiz = vpsiz + vp(m)*vp(m)
      end do
      upsiz = sqrt(upsiz)
      vpsiz = sqrt(vpsiz)
      do m = 1,3
         up(m) = up(m)/upsiz
         vp(m) = vp(m)/vpsiz
      end do
      
      !       ---negative of dot product of torque with unit vectors
      !          along u,v and w.  give result of infinitesmal rotation
      !          along these vectors, i.e. dphi/dtheta = dot product
      
      dphidu = -(torque(1)*u(1)+torque(2)*u(2)+torque(3)*u(3))
      dphidv = -(torque(1)*v(1)+torque(2)*v(2)+torque(3)*v(3))
      dphidw = -(torque(1)*w(1)+torque(2)*w(2)+torque(3)*w(3))
      
      !       ---get projected distances between vectors
      
      c = u(1)*v(1)+u(2)*v(2)+u(3)*v(3)
      s = sqrt(1.d0 - c*c)
      uvdis = usiz*s
      vudis = vsiz*s
      
      !---------------------------------------------------------------------
      ! frame formed by bisector of u,v,  its perp, and w
      ! movement of u by dz out of plane -> rotation about v of -dz/uvdis
      ! since positive rotation about v move u in negative dir. wrt w
      ! dphi/dz = dphi/dtheta dtheta/dz = -dotvt /uvdis
      ! movement of v by dz out of plane -> rotation about u of dz/vudis
      ! movement of u by dy along up -> rotation about w of 1/2 dy/usiz
      ! since bisector only rotates 1/2 as much as u or v in isolation
      ! movement of v by dy along vperp -> rotation about w of 1/2 dy/vsiz
      ! movement of u by dx along u doesn't change frame
      ! movement of v by dx along v doesn't change frame
      ! So... du_du = 0, du_dw = -dotvt/uvdis, du_dup = dotwt/(2.d0*usiz)
      ! So... dv_dv = 0, dv_dw = dotut/vudis, du_dup = dotwt/(2.d0*usiz)
      !---------------------------------------------------------------------
      
      if ( frtype(n) == 1 )then
         j1 = first(n)
         j2 = middle(n)
         j3 = third(n)

         do m = 1,3
            du(m) = -w(m)*dphidv/uvdis + up(m)*dphidw/(2.d0*usiz)
            dv(m) = w(m)*dphidu/vudis + vp(m)*dphidw/(2.d0*vsiz)
            frc(m,j1) = frc(m,j1) - du(m)
            frc(m,j3) = frc(m,j3) - dv(m)
            frc(m,j2) = frc(m,j2) + dv(m) + du(m) + force(m)
         end do
         
#ifndef noVIRIAL
         !         ---get torque contribution to virial
         
         do m = 1,3
            do l = 1,3
               framevir(l,m) = framevir(l,m) + du(l)*(ap(m)-bp(m)) &
                     + dv(l)*(cp(m) - bp(m))
            end do
         end do
#endif
         
      else if ( frtype(n) == 2 ) then
         
         !       ---need to transfer forces from midpoints to atoms
         
         j1 = first(n)
         j2 = middle(n)
         j3 = third(n)
         j4 = atcenter(n)
         do m = 1,3
            du(m) = -w(m)*dphidv/uvdis + up(m)*dphidw/(2.d0*usiz)
            dv(m) = w(m)*dphidu/vudis + vp(m)*dphidw/(2.d0*vsiz)
            frc(m,j1) = frc(m,j1) - 0.5d0*du(m)
            frc(m,j3) = frc(m,j3) - 0.5d0*dv(m)
            frc(m,j2) = frc(m,j2) - 0.5d0*(du(m)+dv(m))
            frc(m,j4) = frc(m,j4) + dv(m) + du(m) + force(m)
         end do
         
#ifndef noVIRIAL
         !         ---get torque contribution to virial
         
         do m = 1,3
            do l = 1,3
               framevir(l,m) = framevir(l,m) + du(l)*(ap(m)-bp(m)) &
                     + dv(l)*(cp(m) - bp(m))
            end do
         end do
#endif
         
      end if  ! ( frtype(n) == 1 )
      
      !---------------------------------------------------------------------
      ! OTHER TYPE FRAME; NOT SEEN YET
      ! frame formed by  u, its perp, and w
      ! movement of v in plane doesn't change frame
      ! movement of u by dz out of plane -> rotation about v of -dz/uvdis
      ! since positive rotation about v move u in negative dir. wrt w
      ! dphi/dz = dphi/dtheta dtheta/dz = -dotvt /uvdis
      ! movement of v by dz out of plane -> rotation about u of dz/vudis
      ! movement of u by dy along up -> rotation about w of dy/usiz
      ! since frame rotates as much as u in isolation
      !---------------------------------------------------------------------
      !         do m = 1,3
      !          du(m) = -w(m)*dphidv/uvdis + up(m)*dphidw/usiz
      !          dv(m) = w(m)*dphidu/vudis
      !          frc(m,j1) = frc(m,j1) - du(m) + force(m)
      !          frc(m,j3) = frc(m,j3) - dv(m)
      !          frc(m,j2) = frc(m,j2) + dv(m) + du(m)
      !         enddo
      ! get torque contribution to virial
      !         do m = 1,3
      !          do l = 1,3
      !           framevir(l,m) = framevir(l,m) + du(l)*(crd(m,j1)-crd(m,j2))
      !    .                      + dv(l)*(crd(m,j3)-crd(m,j2))
      !          enddo
      !         enddo
      !       endif
      
      199 continue
   end do  !  n = 1,numfr
   return
end subroutine do_orient_frc 
!---------------------------------------------------------------------

!----------------------------------------------------------------------
!    ZERO_EXTRA_PNTS_VEC
!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ Calls do_zero_extra_pnts_vec() to
!+ zero the force or velocity vectors associated with extra points.
!
subroutine zero_extra_pnts_vec(vec,ix)
   implicit none

   _REAL_ vec(3,*)
   integer ix(*)
#  include "extra_pts.h"
#  include "ew_cntrl.h"

   if ( frameon == 0 )return
   call do_zero_extra_pnts_vec(vec, ix(inumep), ix(iepfr),numfr)
   return
end subroutine zero_extra_pnts_vec 
!---------------------------------------------------------------------

!----------------------------------------------------------------------
!   DO_ZERO_EXTRA_PNTS_VEC
!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ Zero the force or velocity vectors associated with extra points.
!
subroutine do_zero_extra_pnts_vec(vec,numep,epframe,numfr)
   implicit none
   _REAL_ vec(3,*)
   integer numep(*),epframe(2,*),numfr
   
   integer j,k,n
   
   if ( numfr == 0 )return
   
   do n = 1,numfr
      do k = 1,numep(n)
         j = epframe(k,n)
         vec(:,j) = 0.d0
      end do
   end do  !  n = 1,numfr

   return

end subroutine do_zero_extra_pnts_vec 
!---------------------------------------------------------------------

!----------------------------------------------------------------------
!       FILL_BONDED
!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+
subroutine fill_bonded(max11,max12,max13,max14, &
      num11,num12,num13,num14, &
      list11,list12,list13,list14, &
      enghbrs,numnghbr,epowner,natom, &
      ibh,jbh,ib,jb,ith,kth,it,kt,iph,lph,ip,lp, &
      nbonh,nbona,nbper,ntheth,ntheta,ngper,nphih,nphia,ndper, &
      scr1,scr2,scr3,verbose)
   implicit none
   integer max11,max12,max13,max14,num11,num12,num13,num14
   integer list11(2,max11),list12(2,max12), &
         list13(2,max13),list14(2,max14)
   integer scr1(*),scr2(*),scr3(*)
   integer enghbrs(5,*), &
         numnghbr(3,*),epowner(*),natom
   integer ibh(*),jbh(*),ib(*),jb(*), &
         ith(*),kth(*),it(*),kt(*),iph(*),lph(*),ip(*),lp(*), &
         nbonh,nbona,ntheth,ntheta,nphih,nphia,verbose, &
         nbper,ngper,ndper
   integer n,ifail
   num11 = 0
   num12 = 0
   num13 = 0
   num14 = 0
   do n = 1,natom
      if ( numnghbr(3,n) == 1 )then
         num11 = num11 + 1
         if ( num11 > max11 )goto 100
         list11(1,num11) = n
         list11(2,num11) = enghbrs(1,n)
      else if ( numnghbr(3,n) == 2 )then
         if ( num11 +3 > max11 )goto 100
         num11 = num11 + 1
         if ( num11 > max11 )goto 100
         list11(1,num11) = n
         list11(2,num11) = enghbrs(1,n)
         num11 = num11 + 1
         if ( num11 > max11 )goto 100
         list11(1,num11) = n
         list11(2,num11) = enghbrs(2,n)
         num11 = num11 + 1
         if ( num11 > max11 )goto 100
         list11(1,num11) = enghbrs(1,n)
         list11(2,num11) = enghbrs(2,n)
      else if ( numnghbr(3,n) == 3 )then
         goto 500
      end if
   end do
   !   --- bonds ---------
   call do_pairs(ibh,jbh,nbonh,list12,num12,max12, &
         epowner,numnghbr,enghbrs,ifail)
   if ( ifail == 1 )goto 200
   call do_pairs(ib,jb,nbona+nbper,list12,num12,max12, &
         epowner,numnghbr,enghbrs,ifail)
   call sort_pairs(list12,num12,natom,scr1,scr2,scr3)
   if ( ifail == 1 )goto 200
   !   --- angles --------
   call do_pairs(ith,kth,ntheth,list13,num13,max13, &
         epowner,numnghbr,enghbrs,ifail)
   if ( ifail == 1 )goto 300
   call do_pairs(it,kt,ntheta+ngper,list13,num13,max13, &
         epowner,numnghbr,enghbrs,ifail)
   if ( ifail == 1 )goto 300
   call sort_pairs(list13,num13,natom,scr1,scr2,scr3)
   !   --- dihedrals -----
   call do_pairs(iph,lph,nphih,list14,num14,max14, &
         epowner,numnghbr,enghbrs,ifail)
   if ( ifail == 1 )goto 400
   call do_pairs(ip,lp,nphia+ndper,list14,num14,max14, &
         epowner,numnghbr,enghbrs,ifail)
   if ( ifail == 1 )goto 400
   call sort_pairs(list14,num14,natom,scr1,scr2,scr3)
   
   if( verbose > 0 ) &
         write(6,'(a,4i6)') '| EXTRA PTS fill_bonded: num11-14 = ', &
         num11,num12,num13,num14
   if ( verbose > 3 )then
      write(6,*)'$$$$$$$$$$$$$$$$$ 1-1 pairs $$$$$$$$$$$$$$$$$$$$$$$$'
      do n = 1,num11
         write(6,666)n,list11(1,n),list11(2,n)
      end do
      write(6,*)'$$$$$$$$$$$$$$$$$ 1-2 pairs $$$$$$$$$$$$$$$$$$$$$$$$'
      do n = 1,num12
         write(6,666)n,list12(1,n),list12(2,n)
      end do
      write(6,*)'$$$$$$$$$$$$$$$$$ 1-3 pairs $$$$$$$$$$$$$$$$$$$$$$$$'
      do n = 1,num13
         write(6,666)n,list13(1,n),list13(2,n)
      end do
      write(6,*)'$$$$$$$$$$$$$$$$$ 1-4 pairs $$$$$$$$$$$$$$$$$$$$$$$$'
      do n = 1,num14
         write(6,666)n,list14(1,n),list14(2,n)
      end do
      write(6,*)'$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$'
      666 format(1x,i5,':',3x,'i,j = ',i5,1x,i5)
   end if
   return
   100 write(6,*)'fill_bonded: max11 exceeded!!'
   call mexit(6,1)
   200 write(6,*)'fill_bonded: max12 exceeded!!'
   call mexit(6,1)
   300 write(6,*)'fill_bonded: max13 exceeded!!'
   call mexit(6,1)
   400 write(6,*)'fill_bonded: max14 exceeded!!'
   call mexit(6,1)
   500 write(6,*)'fill_bonded: should not be here!'
end subroutine fill_bonded 

!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ [Enter a one-line description of subroutine sort_pairs here]
subroutine sort_pairs(list,num,natom,scr1,scr2,scr3)
   implicit none
   integer list(2,*),num,natom,scr1(*),scr2(*),scr3(*)
   integer i,j,k,m,n,ntot
   do n = 1,num
      i = list(1,n)
      j = list(2,n)
      if ( i < j )then
         list(1,n) = i
         list(2,n) = j
      else
         list(1,n) = j
         list(2,n) = i
      end if
   end do
   
   !     ---now get rid of duplicates
   
   !     ---first pass
   
   do n = 1,natom
      scr1(n) = 0
   end do
   do n = 1,num
      i = list(1,n)
      scr1(i) = scr1(i) + 1
   end do
   scr2(1) = 0
   do n = 2,natom
      scr2(n) = scr2(n-1) + scr1(n-1)
      scr1(n-1) = 0
   end do
   scr1(natom) = 0
   
   !     ---second pass
   
   do n = 1,num
      i = list(1,n)
      j = list(2,n)
      scr1(i) = scr1(i) + 1
      scr3(scr1(i) + scr2(i)) = j
   end do
   do n = 1,natom
      scr2(n) = 0
   end do
   
   !     ---now trim them
   
   ntot = 0
   k = 0
   do n = 1,natom
      do m = 1,scr1(n)
         j = scr3(ntot + m)
         if ( scr2(j) /= n )then
            k = k + 1
            list(1,k) = n
            list(2,k) = j
            scr2(j) = n
         end if
      end do
      ntot = ntot + scr1(n)
   end do
   num = k
   return
end subroutine sort_pairs 
!---------------------------------------------------------------------
!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ [Enter a one-line description of subroutine sort_pairs here]
subroutine sort_pairs_14_nb(nb_14_list,num,natom,scr1,scr2,scr3,scr4)
   implicit none
   integer nb_14_list(3,*),num,natom,scr1(*),scr2(*),scr3(*),scr4(*)
   integer i,j,k,m,n,ntot,ic0

   !Indexes of nb_14_list = 1,j,ic0  (ic0=icp(n))
   !First pass, make sure the first index contains the lowest number. Ignore
   !index 3 here since this won't change anything.

   do n = 1,num
      i = nb_14_list(1,n)
      j = nb_14_list(2,n)
      if ( i < j )then
         nb_14_list(1,n) = i
         nb_14_list(2,n) = j
      else
         nb_14_list(1,n) = j
         nb_14_list(2,n) = i
      end if
   end do
   
   !     ---now get rid of duplicates
   
   !     ---first pass
   
   scr1(1:natom) = 0
   do n = 1,num
      i = nb_14_list(1,n)
      scr1(i) = scr1(i) + 1
   end do
   scr2(1) = 0
   do n = 2,natom
      scr2(n) = scr2(n-1) + scr1(n-1)
      scr1(n-1) = 0
   end do
   scr1(natom) = 0
   
   !     ---second pass
   
   do n = 1,num
      i = nb_14_list(1,n)
      j = nb_14_list(2,n)
      ic0 = nb_14_list(3,n)
      scr1(i) = scr1(i) + 1
      scr3(scr1(i) + scr2(i)) = j
      scr4(scr1(i) + scr2(i)) = ic0
   end do
   scr2(1:natom) = 0
   
   !     ---now trim them
   
   ntot = 0
   k = 0
   do n = 1,natom
      do m = 1,scr1(n)
         j = scr3(ntot + m)
         ic0 = scr4(ntot + m)
         if ( scr2(j) /= n )then
            k = k + 1
            nb_14_list(1,k) = n
            nb_14_list(2,k) = j
            nb_14_list(3,k) = ic0
            scr2(j) = n
         end if
      end do
      ntot = ntot + scr1(n)
   end do
   num = k
   return
end subroutine sort_pairs_14_nb 
!---------------------------------------------------------------------

!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ [Enter a one-line description of subroutine redo_masked here]
subroutine redo_masked(natom,iblo,inb,nnb, &
      num11,num12,num13,num14, &
      list11,list12,list13,list14,offset,test)
   implicit none
   integer natom,iblo(*),inb(*),nnb, &
         num11,num12,num13,num14, &
         list11(2,*),list12(2,*),list13(2,*),list14(2,*), &
         offset(*), test(*)
   
   !     ---build the mask list from list11-14. Make sure no duplication
   
   integer j,n,m,ntot
   do n = 1,natom
      iblo(n) = 0
      offset(n) = 0
      test(n) = 0
   end do
   
   !     ---PASS 1 fill iblo
   
   call add_one_list_iblo(iblo,list11,num11)
   call add_one_list_iblo(iblo,list12,num12)
   call add_one_list_iblo(iblo,list13,num13)
   call add_one_list_iblo(iblo,list14,num14)
   
   !     ---check totals while finding offsets, resetting iblo
   
   ntot = 0
   do n = 1,natom
      offset(n) = ntot
      ntot = ntot + iblo(n)
      iblo(n) = 0
   end do
   if ( ntot > 2*nnb )then
      write(6,*)'EXTRA POINTS: nnb too small! '
      write(6,*)'nnb,ntot = ',nnb,ntot
      call mexit(6,1)
   end if
   
   !     ---PASS 2 fill inb, redo iblo
   
   call add_one_list_inb(iblo,inb,offset,list11,num11)
   call add_one_list_inb(iblo,inb,offset,list12,num12)
   call add_one_list_inb(iblo,inb,offset,list13,num13)
   call add_one_list_inb(iblo,inb,offset,list14,num14)
   
   !     ---PASS 3 filter inb, remove duplicate entries
   
   do n = 1,natom-1
      do m = 1, iblo(n)
         j = inb(offset(n) + m)
         if (test(j) /= n )then
            test(j) = n
         else
            inb(offset(n) + m) = 0
         end if
      end do
   end do
   return
end subroutine redo_masked 
!---------------------------------------------------------------------

!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ [Enter a one-line description of subroutine add_one_list_iblo here]
subroutine add_one_list_iblo(iblo,list,num)
   implicit none
   integer iblo(*),list(2,*),num
   integer n,i
   do n = 1,num
      i = list(1,n)
      iblo(i) = iblo(i) + 1
   end do
   return
end subroutine add_one_list_iblo 
!---------------------------------------------------------------------

!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ [Enter a one-line description of subroutine add_one_list_inb here]
subroutine add_one_list_inb(iblo,inb,offset,list,num)
   implicit none
   integer iblo(*),inb(*),offset(*),list(2,*),num
   integer n,i,j,m
   do n = 1,num
      i = list(1,n)
      j = list(2,n)
      m = offset(i)
      iblo(i) = iblo(i) + 1
      inb(m+iblo(i)) = j
   end do
   return
end subroutine add_one_list_inb 
!---------------------------------------------------------------------

!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ [Enter a one-line description of subroutine build_14nb here]
subroutine build_14nb(nb_14_list,numnb14,maxnb14, &
      iph,jph,kph,lph,icph,ipa,jpa,kpa,lpa,icpa, &
      nphih,nphia,ndper, &
      epowner,numnghbr,enghbrs, &
      natom,scr1,scr2,scr3,scr4, &
      chngmask,verbose)
   implicit none

   integer nb_14_list(3,*),numnb14,maxnb14, &
         iph(*),jph(*),kph(*),lph(*),icph(*), &
         ipa(*),jpa(*),kpa(*),lpa(*),icpa(*), &
         nphih,nphia,ndper,chngmask,verbose
   integer enghbrs(5,*),numnghbr(3,*),epowner(*)
   integer natom,scr1(*),scr2(*),scr3(*),scr4(*)
   integer ifail,n
   numnb14 = 0
   call do_14pairs(iph,jph,kph,lph,icph, &
         nphih,nb_14_list,numnb14,maxnb14, &
         epowner,numnghbr,enghbrs,ifail,chngmask)
   if ( ifail == 1 )then
      write(6,*)'exceeded maxnb14 in build14: check extra_pts.h'
      call mexit(6,1)
   end if
   call do_14pairs(ipa,jpa,kpa,lpa,icpa, &
         nphia+ndper,nb_14_list,numnb14,maxnb14, &
         epowner,numnghbr,enghbrs,ifail,chngmask)
   if ( ifail == 1 )then
      write(6,*)'exceeded maxnb14 in build14: check extra_pts.h'
      call mexit(6,1)
   end if
   call sort_pairs_14_nb(nb_14_list,numnb14,natom,scr1,scr2,scr3,scr4)
   if( verbose > 0 ) write(6,'(a,i6)') &
         '| EXTRA_PTS, build_14: num of 14 terms = ',numnb14
   if ( verbose > 3 )then
      write(6,*)'$$$$$$$$$$$$$$$$$$$$$$$  1-4 nb list $$$$$$$$$$'
      do n = 1,numnb14
         write(6,666)n,nb_14_list(1,n),nb_14_list(2,n)
      end do
      666 format(1x,i5,':',3x,'i,j = ',i5,1x,i5)
      write(6,*)'$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$'
   end if
   return
end subroutine build_14nb 

!---------------------------------------------------------------------
!       GET_14_CG
!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+
subroutine get_14_cg(charge,crd,frc, &
      iac,ico,ntypes,cn1,cn2, &
      ee14,enb14,one_scee,one_scnb,e14vir,ix,mytaskid,numtasks,eedmeth)
   implicit none
   _REAL_ charge(*),crd(3,*),frc(3,*), &
         cn1(*),cn2(*),e14vir(3,3)
   integer iac(*),ico(*),ntypes,ix(*)
   _REAL_ ee14,enb14,one_scee(*),one_scnb(*)
   integer mytaskid,numtasks,eedmeth
#  include "extra_pts.h"
   call do_14_cg(charge,crd,frc, &
         iac,ico,ntypes,cn1,cn2, &
         ee14,enb14,one_scee,one_scnb,e14vir,ix(inb_14),numnb14, &
         mytaskid,numtasks,eedmeth)
   return
end subroutine get_14_cg 


!--------------------------------------------------------------
!       DO_14_CG
!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+
subroutine do_14_cg(charge,crd,frc, &
      iac,ico,ntypes,cn1,cn2, &
      ee14,enb14,one_scee,one_scnb,e14vir,nb_14_list,numnb14, &
      mytaskid,numtasks,eedmeth)
  use constants, only: zero,one
  use decomp, only: decpr, decpair
  use crg_reloc, only: ifcr, cropt, cr_charge, cr_add_dcdr_factor
  use file_io_dat
#ifdef MPI /* SOFT CORE */
  use softcore, only: ifsc, nsc, sc_ener, oneweight
#endif
   implicit none
   _REAL_ charge(*),crd(3,*),frc(3,*), &
         cn1(*),cn2(*),e14vir(3,3)
   integer iac(*),ico(*),ntypes,nb_14_list(3,*),numnb14
   _REAL_ ee14,enb14,one_scee(*),one_scnb(*)
   integer mytaskid,numtasks,eedmeth
#  include "flocntrl.h"
#  include "md.h"
   
   integer n,i,j,ic,ic0,ia1,ia2,ibig,isml
   _REAL_ dx,dy,dz,r2,r2inv,rinv,scnb0, scee0
   _REAL_ g,f6,f12,r6,df
   _REAL_ cgi, cgj
   ee14 = zero
   enb14 = zero
#ifdef MPI /* SOFT CORE */
   sc_ener(4) = 0.0d0
   sc_ener(5) = 0.0d0
#endif

   if ( do_14 == 0 )return

   e14vir = zero

   if(eedmeth == 5)then
      do n = mytaskid+1,numnb14,numtasks
         i = nb_14_list(1,n)
         j = nb_14_list(2,n)
         ic0 = nb_14_list(3,n)
         scee0=one_scee(ic0)
         scnb0=one_scnb(ic0)
         dx = crd(1,j) - crd(1,i)
         dy = crd(2,j) - crd(2,i)
         dz = crd(3,j) - crd(3,i)
         r2 = dx*dx + dy*dy + dz*dz
         rinv = sqrt(1.d0/r2)
         r2inv = rinv*rinv
         r6 = r2inv*r2inv*r2inv
         if ( ifcr /= 0 .and. cropt == 0 ) then
            cgi = cr_charge(i)
            cgj = cr_charge(j)
         else
            cgi = charge(i)
            cgj = charge(j)
         end if
         g = cgi*cgj*r2inv
         ee14 = ee14 + scee0*g
         !  always use the 6-12 parameters, even if 10-12 are available:
         ia1 = iac(i)
         ia2 = iac(j)
         ibig = max0(ia1,ia2)
         isml = min0(ia1,ia2)
         ic = ibig*(ibig-1)/2+isml
         f6 = cn2(ic)*r6
         f12 = cn1(ic)*(r6*r6)
         enb14 = enb14 + scnb0*(f12 - f6)
         df = (2.d0*scee0*g + scnb0*(12.d0*f12 - 6.d0*f6))*r2inv
         if ( ifcr /= 0 .and. cropt /= 0 ) then
            call cr_add_dcdr_factor( i, cgj*r2inv*scee0 )
            call cr_add_dcdr_factor( j, cgi*r2inv*scee0 )
         end if
         ! -- ti decomp
         if(decpr .and. idecomp /= 0) then
            if(idecomp == 1) then
               call decpair(4,i,j,scee0*g/(nstlim/ntpr))
               call decpair(4,i,j,scnb0*(f12 - f6)/(nstlim/ntpr))
            elseif(idecomp == 2) then
               call decpair(2,i,j,scee0*g/(nstlim/ntpr))
               call decpair(3,i,j,scnb0*(f12 - f6)/(nstlim/ntpr))
            endif
         endif
         frc(1,j) = frc(1,j) + df*dx
         frc(2,j) = frc(2,j) + df*dy
         frc(3,j) = frc(3,j) + df*dz
         frc(1,i) = frc(1,i) - df*dx
         frc(2,i) = frc(2,i) - df*dy
         frc(3,i) = frc(3,i) - df*dz
#ifndef noVIRIAL
         e14vir(1,1) = e14vir(1,1) - df*dx*dx
         e14vir(1,2) = e14vir(1,2) - df*dx*dy
         e14vir(1,3) = e14vir(1,3) - df*dx*dz
         e14vir(2,1) = e14vir(2,1) - df*dy*dx
         e14vir(2,2) = e14vir(2,2) - df*dy*dy
         e14vir(2,3) = e14vir(2,3) - df*dy*dz
         e14vir(3,1) = e14vir(3,1) - df*dz*dx
         e14vir(3,2) = e14vir(3,2) - df*dz*dy
         e14vir(3,3) = e14vir(3,3) - df*dz*dz
#endif
      end do  !  n = 1,numnb14
   else
!      do n = 1,numnb14
!         if ( mod(n,numtasks) /= mytaskid)cycle
      do n = mytaskid+1,numnb14,numtasks
         i = nb_14_list(1,n)
         j = nb_14_list(2,n)
         ic0 = nb_14_list(3,n)
         scee0=one_scee(ic0)
         scnb0=one_scnb(ic0)
         dx = crd(1,j) - crd(1,i)
         dy = crd(2,j) - crd(2,i)
         dz = crd(3,j) - crd(3,i)
         r2 = dx*dx + dy*dy + dz*dz
         rinv = sqrt(1.d0/r2)
         r2inv = rinv*rinv
         r6 = r2inv*r2inv*r2inv
         if ( ifcr /= 0 .and. cropt == 0 ) then
            cgi = cr_charge(i)
            cgj = cr_charge(j)
         else
            cgi = charge(i)
            cgj = charge(j)
         end if
         g = cgi*cgj*rinv
         ee14 = ee14 + scee0*g
         !  always use the 6-12 parameters, even if 10-12 are available:
         ia1 = iac(i)
         ia2 = iac(j)
         ibig = max0(ia1,ia2)
         isml = min0(ia1,ia2)
         ic = ibig*(ibig-1)/2+isml
         f6 = cn2(ic)*r6
         f12 = cn1(ic)*(r6*r6)
         enb14 = enb14 + scnb0*(f12 - f6)
         df = (scee0*g + scnb0*(12.d0*f12 - 6.d0*f6))*r2inv
         if ( ifcr /= 0 .and. cropt /= 0 ) then
            call cr_add_dcdr_factor( i, cgj*rinv*scee0 )
            call cr_add_dcdr_factor( j, cgi*rinv*scee0 )
         end if
#ifdef MPI /* SOFT CORE */
      ! For dual-topology softcore runs, 1-4 interactions involving sc atoms are modified here
         if (ifsc /= 0) then
            ! Check if a softcore atom is involved in this interaction
            if (nsc(i) == 1 .or. nsc(j) == 1) then
               ! This interactions need to 
               ! a) get their energies removed from the 1-4 energies
               ! b) get their force scaled up by 1/weight
               ! This means reversing the work done above, but keeps the code simple
               sc_ener(4) = sc_ener(4) + (scnb0*(f12 - f6))
               enb14 = enb14 - (scnb0*(f12 - f6))
               sc_ener(5) = sc_ener(5) + (scee0*g)
               ee14 = ee14 - (scee0*g)
               df = df * oneweight
               if ( ifcr /= 0 .and. cropt /= 0 ) then
                  call cr_add_dcdr_factor( i, -cgj*rinv*scee0 )
                  call cr_add_dcdr_factor( j, -cgi*rinv*scee0 )
               end if
            end if
         endif

         ! -- ti decomp
         if(ifsc == 0) then
            if(decpr .and. idecomp == 1) then
               call decpair(4,i,j,scee0*g/(nstlim/ntpr))
               call decpair(4,i,j,scnb0*(f12 - f6)/(nstlim/ntpr))
            else if(decpr .and. idecomp == 2) then
               call decpair(2,i,j,scee0*g/(nstlim/ntpr))
               call decpair(3,i,j,scnb0*(f12 - f6)/(nstlim/ntpr))
            endif
         else if( nsc(i) /= 1 .and. nsc(j) /= 1 ) then
            if(decpr .and. idecomp == 1) then
               call decpair(4,i,j,scee0*g/(nstlim/ntpr))
               call decpair(4,i,j,scnb0*(f12 - f6)/(nstlim/ntpr))
            else if(decpr .and. idecomp == 2) then
               call decpair(2,i,j,scee0*g/(nstlim/ntpr))
               call decpair(3,i,j,scnb0*(f12 - f6)/(nstlim/ntpr))
            endif
         endif
#endif
         frc(1,j) = frc(1,j) + df*dx
         frc(2,j) = frc(2,j) + df*dy
         frc(3,j) = frc(3,j) + df*dz
         frc(1,i) = frc(1,i) - df*dx
         frc(2,i) = frc(2,i) - df*dy
         frc(3,i) = frc(3,i) - df*dz
#ifndef noVIRIAL
         e14vir(1,1) = e14vir(1,1) - df*dx*dx
         e14vir(1,2) = e14vir(1,2) - df*dx*dy
         e14vir(1,3) = e14vir(1,3) - df*dx*dz
         e14vir(2,1) = e14vir(2,1) - df*dy*dx
         e14vir(2,2) = e14vir(2,2) - df*dy*dy
         e14vir(2,3) = e14vir(2,3) - df*dy*dz
         e14vir(3,1) = e14vir(3,1) - df*dz*dx
         e14vir(3,2) = e14vir(3,2) - df*dz*dy
         e14vir(3,3) = e14vir(3,3) - df*dz*dz
#endif
      end do  !  n = 1,numnb14
   end if  ! (eedmeth == 5)
   return
end subroutine do_14_cg 
!--------------------------------------------------------------

!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ [Enter a one-line description of subroutine get_14_dipole here]
subroutine get_14_dipole(charge,crd,frc, &
      dipole,field,iac,ico,ntypes,cn1,cn2, &
! M-WJ, WJM, YD
      pol,dampfactor,pol2,&
!
      ee14,enb14,epol14,one_scee,one_scnb,e14vir,ix, &
      mytaskid,numtasks)
   implicit none
   _REAL_ charge(*),crd(3,*),frc(3,*), &
         cn1(*),cn2(*),e14vir(3,3)
! M-WJ, WJM, YD
   _REAL_ dipole(3,*),field(3,*), one_scee(*), one_scnb(*), pol(*),dipdamp
   _REAL_ dampfactor(*) , pol2(*)
!
   integer iac(*),ico(*),ntypes,ix(*)
   _REAL_ ee14,enb14,epol14
   integer mytaskid,numtasks
#  include "extra_pts.h"
#  include "ew_cntrl.h"

   call do_14_dipole(charge,crd,frc,dipole,field, &
         iac,ico,ntypes,cn1,cn2, &
! M-WJ, WJM, YD
         pol,mpoltype,dampfactor,pol2,&
!
         ee14,enb14,epol14,one_scee,one_scnb, &
         e14vir,ix(inb_14),numnb14,mytaskid,numtasks,scaldip)
   return
end subroutine get_14_dipole 
!--------------------------------------------------------------

!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ [Enter a one-line description of subroutine do_14_dipole here]
subroutine do_14_dipole(charge,crd,frc,dipole,field, &
      iac,ico,ntypes,cn1,cn2, &
! M-WJ, WJM, YD
      pol,mpoltype,dampfactor,pol2, &
!
      ee14,enb14,epol14,one_scee,one_scnb, &
      e14vir,nb_14_list,numnb14,mytaskid,numtasks,scaldip)
! M-WJ
   use constants, only : zero, one, two, three, four, five, six, twelve, third, half
!
   implicit none
   _REAL_ charge(*),crd(3,*),frc(3,*), &
         cn1(*),cn2(*),e14vir(3,3)
! M-WJ, WJM, YD
   _REAL_ dipole(3,*),field(3,*), one_scee(*), one_scnb(*), pol(*),dipdamp
   _REAL_ dampfactor(*), pol2(*)
   integer mpoltype
!
   integer iac(*),ico(*),ntypes,nb_14_list(3,*),numnb14
   _REAL_ ee14,enb14,epol14
   integer mytaskid,numtasks,scaldip
#  include "flocntrl.h"

   integer n,i,j,ic, ic0,ia1,ia2,ibig,isml
   _REAL_ dx,dy,dz,r2,r2inv
   _REAL_ rinv
   _REAL_ scee0,scnb0,scdd0,f6,f12,r6,df
   _REAL_ term,term0,term1,termi,termj,termq,cgp
   _REAL_ dphii_dx,dphii_dy,dphii_dz, &
         dphij_dx,dphij_dy,dphij_dz
   _REAL_ c0,c1,c2,c3
   _REAL_ dfx,dfy,dfz
   _REAL_ cgi,cgj,dotir,dotjr,dotp,dotij
! M-WJ
   _REAL_ u3,au3,exp_au3,lambda3,lambda5,lambda7,c1_o
   _REAL_ u,au,a2u2,a3u3,a4u4,exp_au,v,v3,v4,termi_o,termj_o
!
   ee14 = 0.d0
   enb14 = 0.d0
   epol14 = 0.d0
   if ( do_14 == 0 )return

   scdd0 = 1.d0

   do j = 1,3
      do i = 1,3
         e14vir(i,j) = 0.d0
      end do
   end do
!   do n = 1,numnb14
!      if ( mod(n,numtasks) /= mytaskid ) cycle
   do n = mytaskid+1,numnb14,numtasks
      i = nb_14_list(1,n)
      j = nb_14_list(2,n)
      ic0 = nb_14_list(3,n)
      scee0=one_scee(ic0)
      scnb0=one_scnb(ic0)
      if ( scaldip == 1 )then
        scdd0 = one_scee(1)
      end if
      cgi = charge(i)
      cgj = charge(j)
      cgp = cgi*cgj
      dx = crd(1,j) - crd(1,i)
      dy = crd(2,j) - crd(2,i)
      dz = crd(3,j) - crd(3,i)
      r2 = dx*dx + dy*dy + dz*dz
      r2inv = 1.d0/r2
      rinv  = sqrt(r2inv)

! M-WJ: calculate Thole damping function
!  Modified by WJM
         if ( pol(i) == 0 .or. pol(j) == 0 ) then
            lambda3 = one
            lambda5 = one
            lambda7 = one
         else if ( mpoltype == 1 ) then
            lambda3 = one
            lambda5 = one
            lambda7 = one
         else if ( mpoltype == 2 ) then
! pol2()=sqrt(pol()/dampfactors())
            au3 = r2/rinv/ (pol2(i)*pol2(j))
            exp_au3 = exp(-au3)
            lambda3 = one - exp_au3
            lambda5 = one - (one+au3)*exp_au3
            lambda7 = one - (one + au3 + three/five*au3*au3)*exp_au3
         else if ( mpoltype == 3 ) then
! pol2()=pol()**sixth/sqrt(dampfactors())
            au = one / (pol2(i)*pol2(j))/rinv
            exp_au = exp(-au)
            a2u2 = au*au
            a3u3 = a2u2*au
            a4u4 = a3u3*au
            lambda3=one-(a2u2/two+au+one)*exp_au
            lambda5=lambda3-a3u3/six*exp_au
            lambda7=lambda5-a4u4/six/five*exp_au
         else if ( mpoltype == 4 ) then
! pol2()=sqrt(dampfactors())*pol()**(1/6)
            v = one / (pol2(i)*pol2(j)) / rinv
            if ( v < one ) then
               v3 = v*v*v
               v4 = v3*v
               lambda3 = four*v3 - three*v4
               lambda5 = v4
               lambda7 = v4 / five
            else
               lambda3 = one
               lambda5 = one
               lambda7 = one
            end if
         end if
!
      c0 = rinv
      c1 = c0*r2inv
      c2 = 3.d0*c1*r2inv
      c3 = 5.d0*c2*r2inv
! M-WJ damping B
      c1_o = c1
      c1 = c1 * lambda3
      c2 = c2 * lambda5
      c3 = c3 * lambda7
!
      dotjr = dipole(1,j)*dx+dipole(2,j)*dy+dipole(3,j)*dz
      dotir = dipole(1,i)*dx+dipole(2,i)*dy+dipole(3,i)*dz
      dotp = dotjr*dotir
      dotij = dipole(1,i)*dipole(1,j)+dipole(2,i)*dipole(2,j)+ &
            dipole(3,i)*dipole(3,j)
      term = cgj*dotir-cgi*dotjr+dotij
      term0 = cgp*c0 + term*c1 - dotp*c2
! M-WJ
!     termq = cgp*c1
      termq = cgp*c1_o
!
      term1 = term*c2 - dotp*c3
      termi = cgi*c1+dotir*c2
      termj = cgj*c1 - dotjr*c2
! M-WJ
      termi_o = cgi*c1_o+dotir*c2
      termj_o = cgj*c1_o - dotjr*c2
!
      ee14 = ee14 + scee0*cgp*c0
      epol14 = epol14 + scdd0*(term*c1 - dotp*c2)
      dfx = (scee0*termq + scdd0*term1)*dx + &
            scdd0*(termi*dipole(1,j) - termj*dipole(1,i))
      dfy = (scee0*termq + scdd0*term1)*dy + &
            scdd0*(termi*dipole(2,j) - termj*dipole(2,i))
      dfz = (scee0*termq + scdd0*term1)*dz + &
            scdd0*(termi*dipole(3,j) - termj*dipole(3,i))
      r6 = r2inv*r2inv*r2inv
      !  always use the 6-12 parameters, even if 10-12 are available:
      ia1 = iac(i)
      ia2 = iac(j)
      ibig = max0(ia1,ia2)
      isml = min0(ia1,ia2)
      ic = ibig*(ibig-1)/2+isml
      f6 = cn2(ic)*r6
      f12 = cn1(ic)*(r6*r6)
      enb14 = enb14 + scnb0*(f12 - f6)
      df = (12.d0*f12 - 6.d0*f6)*r2inv
      dfx = dfx + scnb0*df*dx
      dfy = dfy + scnb0*df*dy
      dfz = dfz + scnb0*df*dz
      frc(1,j) = frc(1,j) + dfx
      frc(2,j) = frc(2,j) + dfy
      frc(3,j) = frc(3,j) + dfz
      frc(1,i) = frc(1,i) - dfx
      frc(2,i) = frc(2,i) - dfy
      frc(3,i) = frc(3,i) - dfz
! M-WJ
!     dphii_dx = termj*dx + c1*dipole(1,j)
!     dphii_dy = termj*dy + c1*dipole(2,j)
!     dphii_dz = termj*dz + c1*dipole(3,j)
!     dphij_dx = -termi*dx + c1*dipole(1,i)
!     dphij_dy = -termi*dy + c1*dipole(2,i)
!     dphij_dz = -termi*dz + c1*dipole(3,i)
      dphii_dx = termj_o*dx + c1*dipole(1,j)
      dphii_dy = termj_o*dy + c1*dipole(2,j)
      dphii_dz = termj_o*dz + c1*dipole(3,j)
      dphij_dx = -termi_o*dx + c1*dipole(1,i)
      dphij_dy = -termi_o*dy + c1*dipole(2,i)
      dphij_dz = -termi_o*dz + c1*dipole(3,i)
!
      field(1,i) = field(1,i) - scdd0*dphii_dx
      field(2,i) = field(2,i) - scdd0*dphii_dy
      field(3,i) = field(3,i) - scdd0*dphii_dz
      field(1,j) = field(1,j) - scdd0*dphij_dx
      field(2,j) = field(2,j) - scdd0*dphij_dy
      field(3,j) = field(3,j) - scdd0*dphij_dz
#ifndef noVIRIAL
      e14vir(1,1) = e14vir(1,1) - dfx*dx
      e14vir(1,2) = e14vir(1,2) - dfx*dy
      e14vir(1,3) = e14vir(1,3) - dfx*dz
      e14vir(2,1) = e14vir(2,1) - dfy*dx
      e14vir(2,2) = e14vir(2,2) - dfy*dy
      e14vir(2,3) = e14vir(2,3) - dfy*dz
      e14vir(3,1) = e14vir(3,1) - dfz*dx
      e14vir(3,2) = e14vir(3,2) - dfz*dy
      e14vir(3,3) = e14vir(3,3) - dfz*dz
#endif
   end do  !  n = 1,numnb14
   return
end subroutine do_14_dipole 
!--------------------------------------------------------------

!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ [Enter a one-line description of subroutine fix_masses here]
subroutine fix_masses(natom,epowner, &
      nspm,nsp,tma,tmass,tmassinv,amass,amassinv)
   implicit none
   integer natom,epowner(*),nspm,nsp(*)
   _REAL_ tma(*),tmass,tmassinv, &
         amass(*),amassinv(*)
   integer n,k,l
   
   !     ---zero out mass and inverse masses for extra points;
   !        first fix amass,amassinv
   
   do n = 1,natom
      if ( epowner(n) /= 0 )then
         amass(n) = 0.d0
         amassinv(n) = 0.d0
      end if
   end do
   
   !     ---now redo tmass and tma
   
   tmass = 0.d0
   l = 0
   do k = 1,nspm
      tma(k) = 0.d0
      do n = 1,nsp(k)
         l = l + 1
         tma(k) = tma(k) + amass(l)
      end do
      tmass = tmass + tma(k)
   end do
   tmassinv = 1.d0/tmass
   return
end subroutine fix_masses 
!--------------------------------------------------------------

!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ [Enter a one-line description of subroutine trim_bonds here]
subroutine trim_bonds(ib,jb,icb,nbona,nbper,epowner)
   implicit none
   integer ib(*),jb(*),icb(*),nbona,nbper,epowner(*)
   integer ii,jj,n,m,nbper_new
   
   write(6,'(a,2i6)') &
         '|      EXTRA_PTS, trim_bonds: num bonds BEFORE trim =', &
         nbona,nbper
   
   m = 0
   do n = 1,nbona
      ii = (ib(n) + 3)/3
      jj = (jb(n) + 3)/3
      
      !     ---only keep if neither is extra
      
      if ( epowner(ii) == 0 .and. epowner(jj) == 0 )then
         m = m + 1
         ib(m) = ib(n)
         jb(m) = jb(n)
         icb(m) = icb(n)
      end if
   end do
   nbona = m
   
   if( nbper > 0 ) then
      do n = nbona+1,nbona+nbper
         ii = (ib(n) + 3)/3
         jj = (jb(n) + 3)/3
         
         !     ---only keep if neither is extra
         
         if ( epowner(ii) == 0 .and. epowner(jj) == 0 )then
            m = m + 1
            ib(m) = ib(n)
            jb(m) = jb(n)
            icb(m) = icb(n)
            icb(m+nbper) = icb(n+nbper)
         end if
      end do
      nbper_new = m - nbona
      
      do n = 1,nbper-nbper_new
         icb(nbona + nbper_new + n) = icb(nbona + nbper + n)
      end do
      nbper = nbper_new
   end if
   
   write(6,'(a,2i6)') &
         '|      EXTRA_PTS, trim_bonds: num bonds AFTER  trim =', &
         nbona,nbper
   return
end subroutine trim_bonds 
!--------------------------------------------------------------

!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ [Enter a one-line description of subroutine trim_theta here]
subroutine trim_theta(it,jt,kt,ict,ntheta,ngper,epowner)
   implicit none
   integer it(*),jt(*),kt(*),ict(*),ntheta,ngper,epowner(*)
   integer ii,kk,n,m,ngper_new
   m = 0
   write(6,'(a,2i6)') &
         '|      EXTRA_PTS, trim_theta: num angle BEFORE trim =', &
         ntheta,ngper
   
   do n = 1,ntheta
      ii = (it(n) + 3)/3
      kk = (kt(n) + 3)/3
      
      !       ---only keep if neither is extra
      
      if ( epowner(ii) == 0 .and. epowner(kk) == 0 )then
         m = m + 1
         it(m) = it(n)
         jt(m) = jt(n)
         kt(m) = kt(n)
         ict(m) = ict(n)
      end if
   end do
   ntheta = m
   
   if( ngper > 0 ) then
      do n = ntheta+1,ntheta+ngper
         ii = (it(n) + 3)/3
         kk = (kt(n) + 3)/3
         
         !       ---only keep if neither is extra
         
         if ( epowner(ii) == 0 .and. epowner(kk) == 0 )then
            m = m + 1
            it(m) = it(n)
            jt(m) = jt(n)
            kt(m) = kt(n)
            ict(m) = ict(n)
            ict(m+ngper) = ict(n+ngper)
         end if
      end do
      ngper_new = m - ntheta
      do n = 1,ngper-ngper_new
         ict(ntheta + ngper_new + n) = ict(ntheta + ngper + n)
      end do
      ngper = ngper_new
   end if
   
   write(6,'(a,2i6)') &
         '|      EXTRA_PTS, trim_theta: num angle AFTER  trim =', &
         ntheta,ngper
   return
end subroutine trim_theta 
!--------------------------------------------------------------

!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ [Enter a one-line description of subroutine trim_phi here]
subroutine trim_phi(ip,jp,kp,lp,icp,nphi,ndper,epowner)
   implicit none
   integer ip(*),jp(*),kp(*),lp(*),icp(*),nphi,ndper,epowner(*)
   integer ii,ll,n,m,ndper_new
   m = 0
   write(6,'(a,2i6)') &
         '|      EXTRA_PTS, trim_phi:  num diheds BEFORE trim =', &
         nphi,ndper
   
   do n = 1,nphi
      ii = (ip(n) + 3)/3
      ll = (iabs(lp(n)) + 3)/3
      
      !       ---only keep if neither is extra
      
      if ( epowner(ii) == 0 .and. epowner(ll) == 0 )then
         m = m + 1
         ip(m) = ip(n)
         jp(m) = jp(n)
         kp(m) = kp(n)
         lp(m) = lp(n)
         icp(m) = icp(n)
      end if
   end do
   nphi = m
   
   if( ndper > 0 ) then
      do n = nphi+1,nphi+ndper
         ii = (ip(n) + 3)/3
         ll = (iabs(lp(n)) + 3)/3
         
         !       ---only keep if neither is extra
         
         if ( epowner(ii) == 0 .and. epowner(ll) == 0 )then
            m = m + 1
            ip(m) = ip(n)
            jp(m) = jp(n)
            kp(m) = kp(n)
            lp(m) = lp(n)
            icp(m) = icp(n)
            icp(m+ndper) = icp(n+ndper)
         end if
      end do
      ndper_new = m - nphi
      
      do n = 1,ndper-ndper_new
         icp(nphi + ndper_new + n) = icp(nphi + ndper + n)
      end do
      ndper = ndper_new
   end if
   
   write(6,'(a,2i6)') &
         '|      EXTRA_PTS, trim_phi:  num diheds AFTER  trim =', &
         nphi,ndper
   return
end subroutine trim_phi 
!--------------------------------------------------------------

!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ [Enter a one-line description of subroutine fix_degree_count here]
subroutine fix_degree_count(degrees)
   implicit none
   _REAL_ degrees
#  include "extra_pts.h"
   degrees = degrees - 3.d0*numextra
   return
end subroutine fix_degree_count 
!--------------------------------------------------------------

!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ [Enter a one-line description of subroutine allocate_14nb here]
subroutine allocate_14nb(inb_14,numnb14)
   implicit none
   integer inb_14,numnb14
#  include "memory.h"
   integer i_ptr

   i_ptr = lasti
   call adj_mem_ptr(i_ptr,inb_14, 3*numnb14)
!3*numnb14 here since the array contains, ii, jj and ic0
   lasti = i_ptr
   return
end subroutine allocate_14nb 
!--------------------------------------------------------------

!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ [Enter a one-line description of subroutine copy_14nb here]
subroutine copy_14nb(from14,to14,numnb14)
   implicit none
   integer from14(3,*),to14(3,*),numnb14
   integer n
   do n = 1,numnb14
      to14(1,n) = from14(1,n)
      to14(2,n) = from14(2,n)
      to14(3,n) = from14(3,n)
   end do
   return
end subroutine copy_14nb 
!--------------------------------------------------------------

!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ [Enter a one-line description of subroutine allocate_frames here]
subroutine allocate_frames(numextra,ifrtyp,iatcen,inumep, &
      iepfr,ifrst,imid,ithrd,leploc)
   implicit none
   integer numextra
   integer ifrtyp,iatcen,inumep,iepfr,ifrst,imid,ithrd,leploc
#  include "memory.h"
   integer i_ptr,r_ptr,maxfr
   
   !     ---numextra is upper limit to maxfr
   
   maxfr = numextra
   i_ptr = lasti
   call adj_mem_ptr(i_ptr,ifrtyp, maxfr)
   call adj_mem_ptr(i_ptr,iatcen, maxfr)
   call adj_mem_ptr(i_ptr,inumep, maxfr)
   call adj_mem_ptr(i_ptr,iepfr, 2*maxfr)
   call adj_mem_ptr(i_ptr,ifrst, maxfr)
   call adj_mem_ptr(i_ptr,imid, maxfr)
   call adj_mem_ptr(i_ptr,ithrd, maxfr)
   lasti = i_ptr
   r_ptr = lastr
   call adj_mem_ptr(r_ptr,leploc, 3*2*maxfr)
   lastr = r_ptr
   return
end subroutine allocate_frames 

!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ [Enter a one-line description of subroutine do_pairs here]
subroutine do_pairs(ib,jb,npairs,list,num,maxp, &
      epowner,numnghbr,enghbrs,ifail)
   implicit none
   integer ib(*),jb(*),npairs,list(2,*),num,maxp
   integer enghbrs(5,*),numnghbr(3,*),epowner(*)
   integer ifail
   integer i,j,k,l,ii,jj,n
   ifail = 0
   do n = 1,npairs
      
      !       ---sometimes second index negative (improper dihedrals)
      
      ii = (ib(n) + 3)/3
      jj = (iabs(jb(n)) + 3)/3
      
      !       ---check neither is extra. count this bond and also extra attached
      
      if ( epowner(ii) == 0 .and. epowner(jj) == 0 )then
         k = numnghbr(3,ii)
         l = numnghbr(3,jj)
         if ( num + 1 + k + l + k*l > maxp )goto 100
         num = num + 1
         list(1,num) = ii
         list(2,num) = jj
         do i = 1,k
            num = num + 1
            list(1,num) = enghbrs(i,ii)
            list(2,num) = jj
         end do
         do j = 1,l
            num = num + 1
            list(1,num) = ii
            list(2,num) = enghbrs(j,jj)
         end do
         do i = 1,k
            do j = 1,l
               num = num + 1
               list(1,num) = enghbrs(i,ii)
               list(2,num) = enghbrs(j,jj)
            end do
         end do
      end if
   end do  !  n = 1,npairs
   return
   100 ifail = 1
   return
end subroutine do_pairs 

!+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
!+ [Enter a one-line description of subroutine do_14pairs here]
subroutine do_14pairs(ip,jp,kp,lp,icp, &
      nphi,nb_14_list,num,maxnb14, &
      epowner,numnghbr,enghbrs,ifail,chngmask)
   use qmmm_module, only : qmmm_nml,qmmm_struct
   implicit none
   integer ip(*),jp(*),kp(*),lp(*),icp(*)
   integer nphi,nb_14_list(3,*),num,maxnb14,ifail
   integer enghbrs(5,*),numnghbr(3,*),epowner(*),chngmask
   integer i,j,k,l,ii,ll,ic0,n,ni,nl,i3,l3
   logical qmmm_skip
   ifail = 0
   do n = 1,nphi
      i3 = ip(n)
      l3 = iabs(lp(n))
      ic0 = icp(n)
      k = kp(n)
      l = lp(n)
      ii = (i3 + 3)/3
      ll = (l3 + 3)/3
      if (qmmm_nml%ifqnt) then
        if (qmmm_struct%atom_mask(ii) .and. qmmm_struct%atom_mask(ll)) then !both true - Skip QM-QM 1-4 VDW
          qmmm_skip = .true.
        else
          qmmm_skip = .false.
        end if
      else
        qmmm_skip = .false.
      end if
      if (  (k >= 0)    .and. &
            (l >= 0)    .and. &
            (.not. qmmm_skip) &
            )then
         if ( chngmask == 0 )then
            if ( num + 1 > maxnb14 ) then
              ifail = 1
              return
            end if
            num = num + 1
            nb_14_list(1,num) = ii
            nb_14_list(2,num) = ll
            nb_14_list(3,num) = ic0 !needed to be able to look up scnb and scee from arrays.
         else
            !       ---check neither is extra. count this bond and also
            !          extra attached
            if ( epowner(ii) == 0 .and. epowner(ll) == 0 )then
               ni = numnghbr(3,ii)
               nl = numnghbr(3,ll)
               if ( num + 1 + ni + nl + ni*nl > maxnb14 ) then
                 ifail = 1
                 return
               end if
               num = num + 1
               nb_14_list(1,num) = ii
               nb_14_list(2,num) = ll
               nb_14_list(3,num) = ic0 !needed to be able to look up scnb and scee from arrays.
               do i = 1,ni
                  num = num + 1
                  nb_14_list(1,num) = enghbrs(i,ii)
                  nb_14_list(2,num) = ll
                  nb_14_list(3,num) = ic0  !needed to be able to look up scnb and scee from arrays.
               end do
               do j = 1,nl
                  num = num + 1
                  nb_14_list(1,num) = ii
                  nb_14_list(2,num) = enghbrs(j,ll)
                  nb_14_list(3,num) = ic0  !needed to be able to look up scnb and scee from arrays.
               end do
               do i = 1,ni
                  do j = 1,nl
                     num = num + 1
                     nb_14_list(1,num) = enghbrs(i,ii)
                     nb_14_list(2,num) = enghbrs(j,ll)
                     nb_14_list(3,num) = ic0  !needed to be able to look up scnb and scee from arrays.
                  end do
               end do
            end if
         end if  ! ( chngmask == 0 )
      end if  !  (  (k > 0)    .and.
   end do  !  n = 1,nphi
   return
end subroutine do_14pairs